,
Red europea de distribuidores de maquinaria de almacenamiento.
+49 (0) 2389 5299080
Servicio de busqueda Vender maquinas usadas

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:
             Vista 

          Decoiler - Double

          Machinelist: Decoiler - Double

          Double Decoilers for Coils

          used Sheet metal working / shaeres / bending Double Decoilers for Coils ASSERVIMENTI SMD 15 S

          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland
          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0326 · Double Decoilers for Coils

          ASSERVIMENTI - SMD 15 S - - 2001 -

          Technical details
          Double mandrela coil weight each side 1 t︱Material width 200 mm︱Coil exterior diameter 2.050 mm︱Expansion range 350 - 640 mm︱Weight of machine approx. 2,2 t︱
            Double mandrela coil weight each. 1 t
            Material width 200 mm
            Coil exterior diameter 2.050 mm
            Expansion range 350 - 640 mm
            Weight of machine approx. 2,2 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

          • Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used Sheet metal working / shaeres / bending Plate Shear - Mechanical KAPEMA SMP 20-20

          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland
          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08037 · Plate Shear - Mechanical

          KAPEMA - SMP 20-20 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 2 mm
            strokes per minute until 38
            cutting angle 1,75 °
            table height over floor 870 mm
            total power requirement 3 kW
            weight of the machine ca. 1520 kg
            range L-W-H 2,2 x 0,6 x 1,2 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RFR MS/24

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01210 · Plate Shear - Mechanical

          RFR - MS/24 - - ca. 1960 -

          Technical details
          sheet width 2300 mm︱plate thickness 1,5 mm︱distance between columns 2400 mm︱impact length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱
            sheet width 2300 mm
            plate thickness 1,5 mm
            distance between columns 2400 mm
            impact length 1000 mm
            weight of the machine ca. 0,5 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 1550 x 3

          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland
          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1144 · Plate Shear - Mechanical

          OSTAS - RGM 1550 x 3 - - 2019 -

          Technical details
          sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱
          Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting
            sheet width 1550 mm
            plate thickness 3 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm
            Description :
            Producer: OSTAS
            Type: RGM 1050 x 3
            YOM: new

            Max. Shearing Length: 1.050 mm
            Shearing Capacity: 3 mm
            Shearing Angle: 2°30'
            Strokes Per Minute: 35 d/d

            Motor Power: 3 kW
            Table Width: 510 mm
            Table Height: 820 mm
            Rear Gauge Distance: 500 mm
            Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm
            Weight: ca. 1.100 kg


            Additional information:

            • Manual backgauge with 500 mm stroke

            • Squaring arm with T-slot, stopper and ruler

            • Foot pedal

            • Front sheet holding arms

            • Cutting line lighting

            • Protection Cages




            optional:

            • Cutting unit counter
            • Motorised backgauge with 500 mm stroke
            • Backgauge with NC control
            • Pneumatic Sheet Support System
            • Optical security bar
            • 0-180° angle cutting


        • SKM Industriemaschinen
        • Röntgenstr. 3
        • 89264 Weißenhorn
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical METALLKRAFT FTBS 1050-10

          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland
          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3320042 · Plate Shear - Mechanical

          METALLKRAFT - FTBS 1050-10 - - 2017 -

          Technical details
          sheet width 1050 mm︱plate thickness 1 mm︱distance between columns 1000 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,16 x 0,93 x 0,73 m︱
            sheet width 1050 mm
            plate thickness 1 mm
            distance between columns 1000 mm
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 1,16 x 0,93 x 0,73 m
            Description :



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHROEDER MHSUV 2000/4,0

          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland
          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94125 · Plate Shear - Mechanical

          SCHROEDER - MHSUV 2000/4,0 - - 2008 - POS 100

          Technical details
          sheet width 2030 mm︱plate thickness 4,00 mm︱thickness at "Niro-steel" 2,50 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱
          ** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades
            sheet width 2030 mm
            plate thickness 4,00 mm
            thickness at "Niro-steel" 2,50 mm
            no. of strokes 34 Hub/min
            cutting angle 2,5 Grad
            table height 820 mm
            distance between columns 2340 mm
            Control POS 100
            back stop - adjustable max. 750 mm
            engine output 6,8 kW
            weight of the machine ca. 2860 kg.
            range L-W-H 2870 x 2070 x 1400 mm
            Description :
            ** Machine from a maintenance workshop
            ** very well maintained condition - hardly used (!!)

            Furnishing:
            - robust / motorized swing-cut guillotine shears
            - Shatterproof, torsion-free steel welded construction
            - compact and clear mechanical design
            - Electric back gauge, with SCHRÖDER POS 100 NC control
            * Digital position display from the backgauge
            * adjustable from the front right
            * with target/actual value input
            * Continuous adjustment over the entire travel range
            * Protection of limit values with limit switches
            * 9-fold programming possible
            - "Duo-Cut" drive with two dynamic, powerful geared motors
            - Support table with recessed grips
            - Hold-down bar with hard rubber strip
            - All-steel knife, double-edged
            - 1x side stop, with T-slot and mm scale
            - 2x extended sheet metal support arms, with T-slot and mm scale
            - Selector switch for single and continuous stroke
            - freely movable foot switch
            - Rear safety device
            - original operating instructions + CD Rom

            **Special accessories included:
            - pneumatically controlled sheet metal holding device for thin sheet metal cuts
            * Sheet metal removal / sheet metal slide to the front (operator side)
            - 1x wooden box with replacement scissor blades



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE by DURMA RGM 1303

          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich
          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2219 · Plate Shear - Mechanical

          HESSE by DURMA - RGM 1303 - - 2004 -

          Technical details
          gebraucht ︱ 2004 ︱ 9726 ︱ ca. 2 Wochen ab Auftragse ︱ Türkei ︱ 6750 €︱ 1350 mm︱ 3 mm︱ 35 1/min︱ 1,5 °︱ 550 mm︱ 3 kW︱ 2 Stk.︱ 850 mm︱ 400 mm︱ 1700 mm︱ 1350 mm︱ 1200 mm︱ 950 kg︱
          manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO
            gebraucht
            2004
            9726
            ca. 2 Wochen ab Auftragse
            Türkei
            6750 €
            1350 mm
            3 mm
            35 1/min
            1,5 °
            550 mm
            3 kW
            2 Stk.
            850 mm
            400 mm
            1700 mm
            1350 mm
            1200 mm
            950 kg
            Description :
            manualback gauge
            automatic sheet hold down
            hold down with rubber pads
            moveable foot switch
            side support arm
            2 supporting arms
            user manual in GERMAN
            does not complie with the German UVV and Austrian AMVO


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHRÖDER FASTI MSS DUO-CUT

          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland
          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3794 · Plate Shear - Mechanical

          SCHRÖDER FASTI - MSS DUO-CUT - - 1999 -

          Technical details
          sheet width 3000 mm︱plate thickness 3 mm︱weight of the machine ca. t︱
          3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand
            sheet width 3000 mm
            plate thickness 3 mm
            Description :
            3 support arms
            1 angle stop
            pneumatic hold-down device

            Backgauge to be operated by hand


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI 527

          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland
          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-18192 · Plate Shear - Mechanical

          FASTI - 527 - - 1997 -

          Technical details
          sheet width 2500 mm︱plate thickness 3,25 mm︱distance between columns 2550 mm︱sheet width - max. 2540 mm︱number of strokes - loaded 46 Hübe/min.︱cutting angle 1,2 °︱back stop - adjustable 10- 1000 mm︱total power requirement 8,05 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 2,8 x 2 x 1,6 m︱
          It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.
            sheet width 2500 mm
            plate thickness 3,25 mm
            distance between columns 2550 mm
            sheet width - max. 2540 mm
            number of strokes - loaded 46 Hübe/min.
            cutting angle 1,2 °
            back stop - adjustable 10- 1000 mm
            total power requirement 8,05 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 2,8 x 2 x 1,6 m
            Description :
            It has an electronic back gauge with digital readout.
            It has 1 side guiding arm, 2 support arm, foot switch etc.
            It has a sheet holding device at the back side.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMAZLAR RGM 2550 x 2,5

          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland
          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-092052 · Plate Shear - Mechanical

          DURMAZLAR - RGM 2550 x 2,5 - - 1996 -

          Technical details
          sheet width 2500 mm︱plate thickness 2,5 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱cutting strokes max. 35 p.Min.︱back stop - adjustable 500 mm︱total power requirement 3 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,9 x 1,4 x 1,16 m︱foot operated switch ︱ ︱
            sheet width 2500 mm
            plate thickness 2,5 mm
            distance between columns 2550 mm
            cutting angle 1,5 °
            cutting strokes max. 35 p.Min.
            back stop - adjustable 500 mm
            total power requirement 3 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,9 x 1,4 x 1,16 m


        • RS Sperling
        • von-Braun-Str. 20
        • 46244 Bottrop
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical CIDAN MS-X2050/4,0

          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland
          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-0223351 · Plate Shear - Mechanical

          CIDAN - MS-X2050/4,0 - - 1995 - Elgo P71

          Technical details
          sheet width 2000 mm︱plate thickness 4 mm︱distance between columns 2050 mm︱cutting length 2000 mm︱cutting thickness steel 4 mm︱cutting gap adjustment fest/0,05 mm︱ fest/2° ︱Traverse area 1000 mm︱ Elgo P71 ︱Dimensions of machine: ︱length 2600 mm︱width 2300 mm︱height 1500 mm︱control Elgo P71 ︱total power requirement 5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,6x2,3x1,5 m︱
            sheet width 2000 mm
            plate thickness 4 mm
            distance between columns 2050 mm
            cutting length 2000 mm
            cutting thickness steel 4 mm
            cutting gap adjustment fest/0,05 mm
            fest/2°
            Traverse area 1000 mm
            Elgo P71
            length 2600 mm
            width 2300 mm
            height 1500 mm
            control Elgo P71
            total power requirement 5 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,6x2,3x1,5 m


        • B&R Service GmbH
        • Esslingerstr.8
        • 73776 Altbach
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DIGEB OL-3x1250

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1820 · Plate Shear - Mechanical

          DIGEB - OL-3x1250 - - 1983 -

          Technical details
          sheet width 1250 mm︱plate thickness 3,0 mm︱distance between columns 900 mm︱power requirement 2,2 kW︱dimensions 3,27 x 1,69 x 1,29 m︱weight of the machine ca. 1,6 t︱
          used compact mech. guillotine shear - strokes per minute: 50
            sheet width 1250 mm
            plate thickness 3,0 mm
            distance between columns 900 mm
            power requirement 2,2 kW
            dimensions 3,27 x 1,69 x 1,29 m
            weight of the machine ca. 1,6 t
            Description :
            used compact mech. guillotine shear

            - strokes per minute: 50


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI A2

          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland
          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04385 · Plate Shear - Mechanical

          FASTI - A2 - - 1980 -

          Technical details
          sheet width 2.100 mm︱plate thickness 3 mm︱distance between columns 2.100 mm︱weight of the machine ca. 3 t︱
            sheet width 2.100 mm
            plate thickness 3 mm
            distance between columns 2.100 mm
            weight of the machine ca. 3 t


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical FASTI 507/10/4

          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland
          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-27095 · Plate Shear - Mechanical

          FASTI - 507/10/4 - - 1977 -

          Technical details
          sheet width mm︱plate thickness mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1030 mm
          metal sheet thickness: 4 mm
          throat: 100 mm
          B8fe2cks
          rear stop: 1050 mm
          power: 380 V kW
          space needed: 1980 x 1730 x 1230 mm
          weight: 1550 kg
            Description :
            working width: 1030 mm

            metal sheet thickness: 4 mm

            throat: 100 mm

            B8fe2cks

            rear stop: 1050 mm

            power: 380 V kW

            space needed: 1980 x 1730 x 1230 mm

            weight: 1550 kg


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical HESSE KS 254

          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich
          • +43 547221907
            +43 54722190722
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-134 · Plate Shear - Mechanical

          HESSE - KS 254 - - 1969 -

          Technical details
          sheet width 2500 mm︱plate thickness 4 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. m︱
            sheet width 2500 mm
            plate thickness 4 mm
            weight of the machine ca. 4 t


        • MS Maschinenhandel GmbH
        • Unterdorf 34
        • 6532 Ladis
        • Österreich

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical LOTZE K 10 / 1040 x 4,0

          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland
          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325309 · Plate Shear - Mechanical

          LOTZE - K 10 / 1040 x 4,0 - - 1967 - konv.

          Technical details
          sheet width 1040 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱blade length 1100 mm︱no. of strokes ca. 38 Hub/min︱back stop - adjustable ca. 500 mm︱Control konv. ︱table height 820 mm︱Number of working hours ca. 610 h︱engine output 5,0 kW︱weight 2250 kg︱range L-W-H 1650 x 1900 x 1300 mm︱
          ** Machine from a maintenance workshop ** with only approx. 610 operating hours (!!) Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325309
            sheet width 1040 mm
            plate thickness 4,0 mm
            thickness at "Niro-steel" 2,5 mm
            blade length 1100 mm
            no. of strokes ca. 38 Hub/min
            back stop - adjustable ca. 500 mm
            Control konv.
            table height 820 mm
            Number of working hours ca. 610 h
            engine output 5,0 kW
            weight 2250 kg
            range L-W-H 1650 x 1900 x 1300 mm
            Description :
            ** Machine from a maintenance workshop
            ** with only approx. 610 operating hours (!!)

            Furnishing:
            - heavy / robust electro-mechanical sheet metal shears
            - Machine body in a closed design as an all-steel welded construction
            - heavy / robust drive motor (5.0 KW)
            - manual back gauge, adjustable from the rear
            * Adjustment by handwheel, with mm scale
            - 1x side stop
            - 2x front support arms with T-slot
            - manual central lubrication
            - Operating hours counter
            - Special accessories: 1x set of LOTZE replacement knives

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325309


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical RAS 53.30

          • Sachsenring Werkzeug Maschinen GmbH
          • Talstr. 77 B
          • 09337 Hohenstein-Ernstthal
          • Deutschland
          • +49 (0)3723 / 6684755
            +49 (0)3723 / 6684750
          • info@swmgmbh.de
            swmgmbh.de
          #2038-4187 · Plate Shear - Mechanical

          RAS - 53.30 - - 1966 -

          Technical details
          sheet width 2040 mm︱plate thickness 1,5 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱
          guillotine shears, used, Manufacturer: RAS, Type: 53.30, Year of manufacture: 1966, weight: 920 kg, Usable length: 2040 mm, Max. sheet thickness: 1,5 mm
            sheet width 2040 mm
            plate thickness 1,5 mm
            weight of the machine ca. 1 t
            Description :
            guillotine shears, used,
            Manufacturer: RAS, Type: 53.30,
            Year of manufacture: 1966, weight: 920 kg,
            Usable length: 2040 mm,
            Max. sheet thickness: 1,5 mm


        • Sachsenring Werkzeug Maschinen GmbH
        • Talstr. 77 B
        • 09337 Hohenstein-Ernstthal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical WIEGER ESW 3/25

          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23011 · Plate Shear - Mechanical

          WIEGER - ESW 3/25 - - 1963 -

          Technical details
          cutting length 2500 mm︱plate thickness 3 mm︱distance between columns 2050 mm︱blade length 2650 mm︱total power requirement 3 kW︱weight of the machine ca. 2,5 t︱
          - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.
            cutting length 2500 mm
            plate thickness 3 mm
            distance between columns 2050 mm
            blade length 2650 mm
            total power requirement 3 kW
            weight of the machine ca. 2,5 t
            Description :
            - The scissors are equipped with an adjustable stop on the back. stop. Each
            side is equipped with a millimetre counter, so that the guarantee that the cuts
            are true to size.
            - Spring-loaded automatic hold-downs prevent the material from shifting during
            the cutting process. material during the cutting process.


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHULER STa 5/1000

          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland
          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-191798 · Plate Shear - Mechanical

          SCHULER - STa 5/1000 - - 1960 -

          Technical details
          sheet width 5 mm︱plate thickness 1000 mm︱distance between columns mm︱total power requirement 4 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. m︱
            sheet width 5 mm
            plate thickness 1000 mm
            total power requirement 4 kW
            weight of the machine ca. 2,8 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical SCHARRINGHAUSEN HS/S

          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland
          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-3554 · Plate Shear - Mechanical

          SCHARRINGHAUSEN - HS/S - - 1952 -

          Technical details
          sheet width 2000 mm︱plate thickness 2 mm︱distance between columns 2050 mm︱total power requirement 3 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 2 x 1,5 m︱
          guillotine shears adjustable backgauge 600 mm good condition working range: 2050 x 2
            sheet width 2000 mm
            plate thickness 2 mm
            distance between columns 2050 mm
            total power requirement 3 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 2 x 1,5 m
            Description :
            guillotine shears
            adjustable backgauge 600 mm
            good condition
            working range: 2050 x 2




        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical DURMA MS-2525

          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland
          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-1350 · Plate Shear - Mechanical

          DURMA - MS-2525 - - -

          Technical details
          sheet width siehe TD mm︱plate thickness siehe TD mm︱distance between columns siehe TD mm︱total power requirement 3 kW︱weight of the machine ca. 1,54 t︱dimensions of the machine ca. 3100 x 1350 x 1260mm m︱
            sheet width siehe TD mm
            plate thickness siehe TD mm
            distance between columns siehe TD mm
            total power requirement 3 kW
            weight of the machine ca. 1,54 t
            dimensions of the machine ca. 3100 x 1350 x 1260mm m


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical OSTAS RGM 2050 x 3

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-75102 · Plate Shear - Mechanical

          OSTAS - RGM 2050 x 3 - - -

          Technical details
          sheet width 2050 mm︱plate thickness 3 mm︱distance between columns 2100 mm︱back stop - adjustable 600 mm︱connected load kW︱weight of the machine ca. 1,1 t︱dimensions 2,7 x 2,1 x 1,4 m︱
          The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.
            sheet width 2050 mm
            plate thickness 3 mm
            distance between columns 2100 mm
            back stop - adjustable 600 mm
            weight of the machine ca. 1,1 t
            dimensions 2,7 x 2,1 x 1,4 m
            Description :
            The machine works quietly and it is energy-saving by its gear motor and brake
            system.
            Our machine is manufactured as steel construction monoblock body welded from
            ST42 quality material.
            The blades on the machine are of 2379 quality and the brand’s name is BOHLER.
            These high-quality blades ensure quality and precise cutting.
            Emergency stop button and finger guard grill are standard equipment of foot
            pedal machine.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical Jorg 4001/A

          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland
          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-S175 · Plate Shear - Mechanical

          Jorg - 4001/A - - -

          Technical details
          Knife length 1020 mm︱Plate thickness 0,75 mm︱CNC brand - ︱
          Zinc: 16 Aluminum: 1.5
            Knife length 1020 mm
            Plate thickness 0,75 mm
            CNC brand -
            Description :
            Zinc: 16
            Aluminum: 1.5


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

          • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Mechanical UNBEKANNT UNBEKANNT

          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland
          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20359 · Plate Shear - Mechanical

          UNBEKANNT - UNBEKANNT - - -

          Technical details
          sheet width 2.040 mm︱plate thickness 3,0 mm︱distance between columns 2.210 mm︱back stop - adjustable 540 mm︱voltage 400 V︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 2,50 x 2,10 x 1,25 m︱
          Motorized Plate Shear - foot switch - Adjustable backgauge
            sheet width 2.040 mm
            plate thickness 3,0 mm
            distance between columns 2.210 mm
            back stop - adjustable 540 mm
            voltage 400 V
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 2,50 x 2,10 x 1,25 m
            Description :
            Motorized Plate Shear
            - foot switch
            - Adjustable backgauge


        • Kirchgeorg Werkzeugmaschinen
        • Frankfurter Straße 141
        • 63303 Dreieich-Sprendlingen
        • Deutschland

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   
            •
          TOP Manufacturer:

          CORNO ITALY - AMT - CAMU -

          Compendio
          Software
          Contenido de maquinas usadas
          Privacidad
          Síguenos
          © 2000-2024, Logotech oHG · Software- y servicios de Internet - Todos los derechos reservados