Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Band Straightening Machine

          used Sheet metal working / shaeres / bending Band Straightening Machine SCHULER SMG


          • Goedicke Werkzeugmaschinenhandels GmbH
          • Heinz-Nixdorf-Str. 2
          • 74172 Neckarsulm
          • Deutschland

          • +49-(0) 7132–999 360
            +49-(0) 7132–999 3690
          • info@goedicke.com
            www.goedicke.com
          #1048-742130 · Band Straightening Machine

          SCHULER SMG - - - 2004 -

          Technical details
          band width 1050 mm︱plate thickness 8 mm︱number of rolls 8 ︱----------------------------------- ︱DECOILER . ︱ - design : single coil . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - max. weight of coil 22 to︱ - max. diameter of coil 2000 mm︱ - min. internal diameter of coil 570 mm︱FEEDERS . ︱ - feeder: type : roll feeder . ︱ - sheet width max 1050 mm︱ - sheet thickness max 150 mm︱LEVELER UNIT . ︱ - sheet width max 1050 mm︱ - sheet width (min) 150 mm︱ - sheet thickness max 8 mm︱ - sheet thickness (min) 2.5 mm︱
          Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOADING CAR - HSK-280-1050 DECOILER HASP - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER - ADCH 1050-8 TRANSVERSE CUTTING UNIT This unit does not require any BENDING PIT, because of being of short structural form .
            band width 1050 mm
            plate thickness 8 mm
            number of rolls 8
            DECOILER .
            - design : single coil .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - max. weight of coil 22 to
            - max. diameter of coil 2000 mm
            - min. internal diameter of co. 570 mm
            FEEDERS .
            - feeder: type : roll feeder .
            - sheet width max 1050 mm
            - sheet thickness max 150 mm
            LEVELER UNIT .
            - sheet width max 1050 mm
            - sheet width (min) 150 mm
            - sheet thickness max 8 mm
            - sheet thickness (min) 2.5 mm
            Description :
            Technical description :

            Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:

            - LAWECO COIL LOADING CAR
            - HSK-280-1050 DECOILER HASP
            - SHF 8-96 / 160-1050 SHEET METAL STRAIGHTENER
            - ADCH 1050-8 TRANSVERSE CUTTING UNIT

            This unit does not require any BENDING PIT, because of being of short structural form .


          Datasheet
          Request / Contact

          Bar Stock Shearing Machines

          used Sheet metal working / shaeres / bending Bar Stock Shearing Machines MUHR & BENDER KFS 50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9325137 · Bar Stock Shearing Machines

          MUHR & BENDER - KFS 50 - - 1975 -

          Technical details
          flat steel 100 x 36 mm︱flat steel 300 x 20 mm︱round bar steel 65,0 mm︱square edge steel 60,0 mm︱stroke 40 Hub / min.︱total power requirement 5,5 kW︱weight 1980 kg︱range L-W-H 1500 x 1500 x 2400 mm︱
          Furnishing: - heavy / robust steel bar shears - with vertical slide run - can be used for right-angled cutting of: * Round steel * Square steel * Flat steel - designed for continuous operation - electrical length stop - Central lubrication unit - front material support - rear sheet metal slide - foot switch - manual hold-down device - Operation manual ** including replacement knife
            flat steel 100 x 36 mm
            flat steel 300 x 20 mm
            round bar steel 65,0 mm
            square edge steel 60,0 mm
            stroke 40 Hub / min.
            total power requirement 5,5 kW
            weight 1980 kg
            range L-W-H 1500 x 1500 x 2400 mm
            Description :
            Furnishing:
            - heavy / robust steel bar shears
            - with vertical slide run
            - can be used for right-angled cutting of:
            * Round steel
            * Square steel
            * Flat steel
            - designed for continuous operation
            - electrical length stop
            - Central lubrication unit
            - front material support
            - rear sheet metal slide
            - foot switch
            - manual hold-down device
            - Operation manual

            ** including replacement knife
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Bar Stock Shearing Machines PEDDINGHAUS Simplex 63


          • Franz Teutenberg GmbH & Co KG
          • Am Nordkanal 34-36
          • 47877 Willich
          • Deutschland

          • 02154 95790
            02154 9579 29
          • info@teutenberg-maschinen.com
            www.teutenberg-maschinen.com
          #1132-102950 · Bar Stock Shearing Machines

          PEDDINGHAUS - Simplex 63 - - 1974 -

          Technical details
          round bar steel 63 mm︱square edge steel 55 mm︱ Flach 100 x 25 mm︱pressing power t︱no. of strokes Hub/min︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          SHEAR constr. Peddinghaus type Simplex 63 cutting range Ø 63 mm max. square 55 mm max. flats 100 x 25 mm Weight: appr. 2450 kg
            round bar steel 63 mm
            square edge steel 55 mm
            Flach 100 x 25 mm
            Description :
            SHEAR
            constr. Peddinghaus

            type Simplex 63

            cutting range Ø 63 mm max.
            square 55 mm max.
            flats 100 x 25 mm


            Weight: appr. 2450 kg
          Datasheet
          Request / Contact

          bending machine horizontal

          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 100 digital


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-9030006 · bending machine horizontal

          ZOPF - T 100 digital - - Neu -

          Technical details
          pressure 100 kN︱stroke 0-200 mm︱table-size 450 x 1000 mm︱working speed: 6-10 mm/ sec.︱return speed 20 mm/sec︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 1,5 kW︱bending capacity max. - round 42x3,2 mm︱ 150x10 mm︱weight 320 kg︱dimensions 1010x480x1120 mm︱
            pressure 100 kN
            stroke 0-200 mm
            table-size 450 x 1000 mm
            working speed: 6-10 mm/ sec.
            return speed 20 mm/sec
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 1,5 kW
            bending capacity max. - round 42x3,2 mm
            150x10 mm
            weight 320 kg
            dimensions 1010x480x1120 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 200 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040221 · bending machine horizontal

          ZOPF - T 200 Multiprogramm - - Neu -

          Technical details
          200 kN︱stroke length max. 200 mm︱working feed 10 mm/sec︱return speed 20 mm/sec︱ 480x1060 mm︱work height max. 900 mm︱toolpiece height max. 200 mm︱total power requirement 2,2 kW︱ 200x12 mm︱bending capacity max. - round 48x4,0 mm︱weight 500 kg︱Overall size 1010x480x1120 mm︱
          Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm
            200 kN
            stroke length max. 200 mm
            working feed 10 mm/sec
            return speed 20 mm/sec
            480x1060 mm
            work height max. 900 mm
            toolpiece height max. 200 mm
            total power requirement 2,2 kW
            200x12 mm
            bending capacity max. - round 48x4,0 mm
            weight 500 kg
            Overall size 1010x480x1120 mm
            Description :
            Domestic equipments:
            - with semi-automatic control (99 programs with 16 steps each)
            - including bending bolt (without punch)
            - Tool holder for dies
            - Foot pedal

            Equipment:
            - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm
            - Quick change monometer 85 °, H = 200 mm, V = 63 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 300 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040186 · bending machine horizontal

          ZOPF - T 300 Multiprogramm - - Neu -

          Technical details
          300 kN︱stroke length max. 235 mm︱ 200x24 mm︱bending capacity max. - round 60x4,0 mm︱toolpiece height max. 250 mm︱ 660x1250 mm︱work height max. 900 mm︱return speed 20 mm/sec︱working feed 10 mm/sec︱total power requirement 3 kW︱weight 950 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm
            300 kN
            stroke length max. 235 mm
            200x24 mm
            bending capacity max. - round 60x4,0 mm
            toolpiece height max. 250 mm
            660x1250 mm
            work height max. 900 mm
            return speed 20 mm/sec
            working feed 10 mm/sec
            total power requirement 3 kW
            weight 950 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal

            Equipment:
            - Stamp, smallest U = 145 mm 85 °
               H = 250 mm, R = 5 mm
            - Quick change Monomatrize 85 °
               H = 250 mm, V = 63 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal ZOPF T 400 Multiprogramm


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4040228 · bending machine horizontal

          ZOPF - T 400 Multiprogramm - - Neu -

          Technical details
          400 kN︱stroke length max. 285 mm︱working feed 9 mm/sec︱return speed 20 mm/sec︱ 660x1250 mm︱work height max. 930 mm︱toolpiece height max. 250 mm︱total power requirement 4 kW︱ 200x26 mm︱bending capacity max. - round 60x5,0 mm︱weight 1050 kg︱
          Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal
            400 kN
            stroke length max. 285 mm
            working feed 9 mm/sec
            return speed 20 mm/sec
            660x1250 mm
            work height max. 930 mm
            toolpiece height max. 250 mm
            total power requirement 4 kW
            200x26 mm
            bending capacity max. - round 60x5,0 mm
            weight 1050 kg
            Description :
            Domestic equipments:
            - semi-automatic NC control (99 programs with 16 steps each)
            - incl. bending bolt (without punch)
            - Incl. tool holder for dies
            - incl. foot pedal
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 20


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7204 · bending machine horizontal

          FASTECH - FP 20 - - NEU -

          Technical details
          pressure 20 t︱stroke 185 mm︱table-size 480 x 1060 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 0,53 t︱total power requirement 2,2 kW︱dimensions of the machine ca. 1150 x 500 x 1200 mm︱
          - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch
            pressure 20 t
            stroke 185 mm
            table-size 480 x 1060 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 0,53 t
            total power requirement 2,2 kW
            dimensions of the machine ca. 1150 x 500 x 1200 mm
            Description :
            - hydraulic horizontal bending machine
            - Solid work surface made of stabilized steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke adjustment
            - 1x tool kit
            - stepless adjustment of speed / pressing force
            - Double foot switch
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 40


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7181 · bending machine horizontal

          FASTECH - FP 40 - - NEU -

          Technical details
          pressure 40 t︱stroke 285 mm︱table-size 660 x 1250 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,5 t︱total power requirement 4,0 kW︱dimensions of the machine ca. 1,45 x 0,65 x 1,8 m︱
          Equipment: - hydraulic horizontal bending machine - solid work surface stabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch
            pressure 40 t
            stroke 285 mm
            table-size 660 x 1250 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 1,5 t
            total power requirement 4,0 kW
            dimensions of the machine ca. 1,45 x 0,65 x 1,8 m
            Description :
            Equipment: - hydraulic horizontal bending machine - solid work surface
            stabilized steel - machine made of hardened and ground forged steel -
            Digital display for stroke adjustment - 1x tool kit - double foot switch
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTECH FP 80


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7355 · bending machine horizontal

          FASTECH - FP 80 - - NEU -

          Technical details
          pressure 80 t︱stroke 285 mm︱table-size 750 x 1425 mm︱work speed 10,0 mm/sec︱return speed 10,0 mm/sec︱weight of the machine ca. 1,7 t︱total power requirement 10,0 kW︱dimensions of the machine ca. 1,5 x 0,75 x 1,8 m︱
          - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - Double foot switch
            pressure 80 t
            stroke 285 mm
            table-size 750 x 1425 mm
            work speed 10,0 mm/sec
            return speed 10,0 mm/sec
            weight of the machine ca. 1,7 t
            total power requirement 10,0 kW
            dimensions of the machine ca. 1,5 x 0,75 x 1,8 m
            Description :
            - hydraulic horizontal bending machine
            - Solid work surface made of stabilized steel
            - Machine made of hardened and ground forged steel
            - Digital display for stroke adjustment
            - 1x tool kit
            - Double foot switch
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal RHTC PROFI PRESS HB - 28


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6284 · bending machine horizontal

          RHTC - PROFI PRESS HB - 28 - - NEU -

          Technical details
          pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱diameter of piston 130 mm︱work speed min. 2 m/sec︱work speed max. 9,8 m/sec︱return speed 20 mm/sec︱Max. pressure 200 bar︱weight of the machine ca. 0,65 t︱total power requirement 4 kW︱dimensions of the machine ca. 1,15 x 0,75 x 1,1 m︱
          • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.
            pressure 28 t
            stroke 180 mm
            table-size 300 x 550 mm
            diameter of piston 130 mm
            work speed min. 2 m/sec
            work speed max. 9,8 m/sec
            return speed 20 mm/sec
            Max. pressure 200 bar
            weight of the machine ca. 0,65 t
            total power requirement 4 kW
            dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
            Description :
            • The horizontal bending and straightening press from Profi Press is a
            universal one Hydraulic press specially designed for performing bending,
            profiling and Straightening work is designed. The applications of the machine
            are different and depend on the accessories that are on the work table, the
            Tool holder and are installed in the holes and pin holes.
            • The HB-28 model is used for light bending measurements on the work table
            equipped with an angle scale, and the press can also be equipped with tools
            are supplied (for example block punching) that are placed on the tool holder
            Can be assembled, as well as tools that are in the holes and pin holes
            can be installed to carry out various types of work.
            • The hydraulic system can be adjusted with the help of the pressure and flow
            adjustment valves can be regulated, which is the pressing force and the speed
            of the press influence. The press is equipped with a built-in manometer.
            • The control panel is used to operate and display the piston stroke and for
            Choice between manual or automatic operation, and the HB-28 model
            is also with a built-in memory for up to 4 different programs
            fitted.
            • Operation is via electric foot pedals.
            • The Profi Press HB-28 model can be equipped with various optional accessories
            hearing parts and tools for installation on the workbench and the
            Tool holder to be delivered.
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal PROFI PRESS HB-28 NC


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-081251 · bending machine horizontal

          PROFI PRESS - HB-28 NC - - 2021 -

          Technical details
          pressure 28 t︱stroke 180 mm︱table-size 300 x 550 mm︱total power requirement 4 kW︱weight of the machine ca. 0,650 t︱diameter of piston 180 mm︱working feed 2 mm/sec︱return speed 20 mm/sec︱pressure capacity max. 200 bar︱toolpiece height min. 200 mm︱dimensions of the machine ca. 1150 x 750 x 1103 mm︱
          This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can be installed in the punch and pin holes to perform several works. The hydraulic system of this horizontal straightening / bending press can be regulated by means of the pressure- and flow adjustment valves which affect the pressing force and the speed of the press. The HB-28 is also equipped with an integrated manometer. The control panel of this horizontal straightening press features the operation and read-out of the piston stroke, a selector for manual or automatic operation and this hydraulic press is equipped with a built-in memory to save up to 4 different programs. Operation is carried out by electric foot pedals. There are many possibilities and purposes for this horizontal straightening press, so please inform us about your request and we will do our best to design the tools that suit your requirements. This Profi Press straightening / bending press is made in Europe and fulfils the latest CE-regulations.'
            pressure 28 t
            stroke 180 mm
            table-size 300 x 550 mm
            total power requirement 4 kW
            weight of the machine ca. 0,650 t
            diameter of piston 180 mm
            working feed 2 mm/sec
            return speed 20 mm/sec
            pressure capacity max. 200 bar
            toolpiece height min. 200 mm
            dimensions of the machine ca. 1150 x 750 x 1103 mm
            Description :
            This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ?

            ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can be installed in the punch and pin holes to perform several works.

            The hydraulic system of this horizontal straightening / bending press can be regulated by means of the pressure- and flow adjustment valves which affect the pressing force and the speed of the press. The HB-28 is also equipped with an integrated manometer. The control panel of this horizontal straightening press features the operation and read-out of the piston stroke, a selector for manual or automatic operation and this hydraulic press is equipped with a built-in memory to save up to 4 different programs. Operation is carried out by electric foot pedals.
            There are many possibilities and purposes for this horizontal straightening press, so please inform us about your request and we will do our best to design the tools that suit your requirements. This Profi Press straightening / bending press is made in Europe and fulfils the latest CE-regulations.'
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal OSTAS OHP-10


          • RS Sperling
          • von-Braun-Str. 20
          • 46244 Bottrop
          • Deutschland

          • +49 (0) 2045 / 41 43 22-0
            +49 (0) 2045 / 41 43 22-9
          • info@rs-sperling.de
            www.rs-sperling.de
          #1100-089999 · bending machine horizontal

          OSTAS - OHP-10 - - 2021 -

          Technical details
          pressure 10 t︱stroke 150 mm︱table-size 250 x 800 mm︱work height max. 800 mm︱toolpiece height max. 100 mm︱total power requirement 1,5 kW︱ 100x10 mm︱weight 350 kg︱dimensions 1,2 x 0,5 x 1,0 mm︱
            pressure 10 t
            stroke 150 mm
            table-size 250 x 800 mm
            work height max. 800 mm
            toolpiece height max. 100 mm
            total power requirement 1,5 kW
            100x10 mm
            weight 350 kg
            dimensions 1,2 x 0,5 x 1,0 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Gelber Bieger VARIO III


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7074 · bending machine horizontal

          Gelber Bieger - VARIO III - - 2020 -

          Technical details
          pressure 10 t︱stroke 150 mm︱table-size - mm︱bending speed < 10 m/sec︱toolpiece height max. 100 mm︱ 100 mm︱workpiece height max. 150 mm︱hydraulic-pressure 200, max. 240 bar möglich bar︱noise level < 70 dB(A)︱quantity of oil 6 l︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1500 x 650 x 1300 mm︱
            pressure 10 t
            stroke 150 mm
            table-size - mm
            bending speed < 10 m/sec
            toolpiece height max. 100 mm
            100 mm
            workpiece height max. 150 mm
            hydraulic-pressure 200, max. 240 bar möglich bar
            noise level < 70 dB(A)
            quantity of oil 6 l
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 1500 x 650 x 1300 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Profi Press HB-28


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-BG144 · bending machine horizontal

          Profi Press - HB-28 - - 2020 -

          Technical details
          Capacity 28 T︱Speed 2 - 9.8 mm/sec︱Machine dimensions (lxwxh) 1050 x 750 x 1100 mm︱Machine weight 800 kg︱
          Hydraulic Piston diameter: 130 mm Stroke: 150 mm Max. pressure: 250 Bar Power: 4 kW
            Capacity 28 T
            Speed 2 - 9.8 mm/sec
            Machine dimensions (lxwxh) 1050 x 750 x 1100 mm
            Machine weight 800 kg
            Description :
            Hydraulic
            Piston diameter: 130 mm
            Stroke: 150 mm
            Max. pressure: 250 Bar
            Power: 4 kW
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal OSTAS OHP-10


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-19265 · bending machine horizontal

          OSTAS - OHP-10 - - 2018 -

          Technical details
          pressure 10 t︱stroke 150 mm︱table-size 250 x 800 mm︱working speed: mm/ sec.︱return speed mm/sec︱work height max. 800 mm︱toolpiece height max. 100 mm︱total power requirement 1,5 kW︱ 100x10 mm︱weight 350 kg︱dimensions 1,2 x 0,5 x 1,0 mm︱
            pressure 10 t
            stroke 150 mm
            table-size 250 x 800 mm
            work height max. 800 mm
            toolpiece height max. 100 mm
            total power requirement 1,5 kW
            100x10 mm
            weight 350 kg
            dimensions 1,2 x 0,5 x 1,0 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal Apollo P 320


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5768 · bending machine horizontal

          Apollo - P 320 - - 2015 (NEUWERTIG) -

          Technical details
          pressure 32 t︱stroke 250 mm︱table-size 500 x 760 mm︱work height max. 925 mm︱bending speed max. 25 mm/sec︱tank capacity 80 l︱Pressure power 320 bar︱total power requirement 5,5 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,3 x 0,5 x 1,3 m︱
          max.bending height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm
            pressure 32 t
            stroke 250 mm
            table-size 500 x 760 mm
            work height max. 925 mm
            bending speed max. 25 mm/sec
            tank capacity 80 l
            Pressure power 320 bar
            total power requirement 5,5 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 1,3 x 0,5 x 1,3 m
            Description :
            max.bending height: 200 mm
            Cutting capacity max. (St): 150 x 14
            Punching capacity max. (St) Ø 35
            Guide height: 200 mm
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal SALVAGNINI PERformER


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-1079 · bending machine horizontal

          SALVAGNINI - PERformER - - 2007 -

          Technical details
          pressure - t︱stroke 2000 mm︱table-size mm︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure - t
            stroke 2000 mm
            total power requirement 15 kW
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTI 221-25-3


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-561 · bending machine horizontal

          FASTI - 221-25-3 - - 1999 -

          Technical details

          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal WEINBRENNER B12/306/1500/225/2


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-544 · bending machine horizontal

          WEINBRENNER - B12/306/1500/225/2 - - 1997 -

          Technical details

          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal SIMASV T 22


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1007 · bending machine horizontal

          SIMASV - T 22 - - 1992 -

          Technical details
          gebraucht19929401Italien7100 €︱ 122 to︱ 200 mm︱ 120 mm︱ 55 mm︱ 1750 mm/min︱ 470 mm/min︱ 1,5 kW︱ 1100 mm︱ 630 mm︱ 925 mm︱ 630 kg︱
          setting the feed speed adjustment of the working and return stroke of the stamp pedal emergency stop button tools on request COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATION (AMVO & UVV)
            gebraucht
            1992
            9401
            Italien
            7100 €
            1
            22 to
            200 mm
            120 mm
            55 mm
            1750 mm/min
            470 mm/min
            1,5 kW
            1100 mm
            630 mm
            925 mm
            630 kg
            Description :
            setting the feed speed
            adjustment of the working and return stroke of the stamp
            pedal
            emergency stop button
            tools on request
            COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATION (AMVO & UVV)
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal FASTI 1620 x 3


          • INTER-PLAST
          • 42-209 Czestochowa

          • +48 343 627 904
            +48 785 198 061
          • iweta@inter-plast.com.pl
            www.inter-plast.com.pl
          #1129-584 · bending machine horizontal

          FASTI - 1620 x 3 - - 1990 -

          Technical details

          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal WMW BBP32


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05247 · bending machine horizontal

          WMW - BBP32 - - 1989 -

          Technical details
          WMW BBP32 ︱diameter für max. 32 mm︱drive hydraulisch ︱weight of the machine ca. 1 t︱
            WMW BBP32
            diameter für max. 32 mm
            drive hydraulisch
            weight of the machine ca. 1 t
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending bending machine horizontal KRUPS A1,5


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04903 · bending machine horizontal

          KRUPS - A1,5 - - 1988 -

          Technical details
          Krups A1,5 ︱weight of the machine ca. 300 kg︱
            Krups A1,5
            weight of the machine ca. 300 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.