Red europea de distribuidores de maquinaria de almacenamiento.
¿Qué término de búsqueda usaría para buscar esta máquina?
Bevel Gear Generator - Straight
GLEASON 104 CONIFLEX
Kemmerich Werkzeugmaschinen
GmbHIm Rottfeld 1a · 40789 - Monheim am Rhein
+49 2173 207474
+49 2173 207473
www.kemmerich.biz
Machine data
Machine photos
Document
No hay más documentos disponiblesTechnical details
| max. wheel diameter | 216 mm |
| tooth width | 35 mm |
| max. module | 8,5 |
| min. module | 1,3 |
| ratio | 10 : 1 |
| cone distance min./max. | 0 - 108 mm |
| min/max. pitch cone angle | 5°42' - 84°18' |
| cutter speeds | 30 - 87 m/min |
| feed | 4,2 - 69,2 m/min |
| main drive motor | 3,7 kW |
| Control | Fanuc 0-GC |
| total power requirement | 5 kW |
| weight of the machine ca. | 7 t |
Videos
No hay archivos de video disponiblesAdditional information
- CNC Control Fanuc 0-GC
- Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
- Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
- Self-Contained Hydraulic System
- Self-Contained Coolant System
- Workhead Brake
- Full Guards Cover
- Full Compliment of Electrics (Motor/Controls)
SPECIFICATIONS:
Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
- Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
- Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
- Self-Contained Hydraulic System
- Self-Contained Coolant System
- Workhead Brake
- Full Guards Cover
- Full Compliment of Electrics (Motor/Controls)
SPECIFICATIONS:
Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
On this page you will find a an offer on a used Bevel Gear Generator - Straight of type 104 CONIFLEX of the company GLEASON with year of construction 1997 and with stock no.: 1020-20211. The machine is manufactured by the company Kemmerich Werkzeugmaschinen GmbH from 40789 Monheim am Rhein offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.
Documentos y videos
No hay más documentos disponibles
No hay archivos de video disponibles
Machine
Bevel Gear Generator - Straight
