,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sanding machine

          Machinelist: Sanding machine


          Sanding machine

          used Window production: wood Sanding machine HESS BS200


          • Bort&Herkert GmbH
          • Ringstraße 43-45
          • 74626 Bretzfeld
          • Deutschland

          • +49 (0) 7946/9278-0
            +49 (0) 7946/9278-99
          • info@bort-herkert.de
            www.bort-herkert.de
          #1325-26048 · Sanding machine

          HESS - BS200 - - unbekannt -

          Technical details
          Number of sanding units 2 st.︱sanding width ca. 180 mm︱Sanding height max. 12 - 140 mm︱
            Number of sanding units 2 st.
            sanding width ca. 180 mm
            Sanding height max. 12 - 140 mm


        • Bort&Herkert GmbH
        • Ringstraße 43-45
        • 74626 Bretzfeld
        • Deutschland

        • 2.900 €
          Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD QL 4-8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5452 · Sanding machine

          QUICKWOOD - QL 4-8 - - neu -

          Technical details
          Number of sanding units 8 St.︱sanding width 300 mm︱Sanding height max. 100 mm︱
          Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ------------------------------------------------------------------------------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel- und - Rahmeneinzelteile - Glasleisten - Profilbretter - Kranzprofile - Verkleidungen - Profilierte Leisten Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 8 St.
            sanding width 300 mm
            Sanding height max. 100 mm
            Description :
            Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine
            -------------------------------------------------------------------------------------------------------------

            Maschine zur Längsholzbearbeitung
            - Lose Fasern werden von der Oberfläche entfernt
            - Erhebliche Reduzierung der Faserbildung nach der Grundierung
            - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur
            - Bessere Tiefenwirkung im Holz
            - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz
            - Stufenlose Einstellungen aller Geschwindigkeiten
            - Leichter Werkzeugwechsel durch abnehmbare Spindeln
            - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite
            - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung
            - Optionale PLC-Steuerung vorgesehen

            Einsatzmöglichkeiten
            - Fensterflügel- und
            - Rahmeneinzelteile
            - Glasleisten
            - Profilbretter
            - Kranzprofile
            - Verkleidungen
            - Profilierte Leisten

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD ROV 2600


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5453 · Sanding machine

          QUICKWOOD - ROV 2600 - - neu -

          Technical details
          Number of sanding units 32 St.︱sanding width 2600 mm︱Sanding height max. 150 mm︱
          Quckwood ROV 2600 vertikale Zwischenschliffmaschine ------------------------------------------------------------------------------- Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren, Möbelteilen am Hängeförderer. - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite. - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine. - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen. - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine. - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften. - Hohe Werkzeugstandzeit. Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 32 St.
            sanding width 2600 mm
            Sanding height max. 150 mm
            Description :
            Quckwood ROV 2600 vertikale Zwischenschliffmaschine
            -------------------------------------------------------------------------------

            Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren,
            Möbelteilen am Hängeförderer.

            - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite.
            - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine.
            - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen.
            - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine.
            - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften.
            - Hohe Werkzeugstandzeit.

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER MiniSpin N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6006 · Sanding machine

          LÖWER - MiniSpin N - - neu -

          Technical details
          Number of sanding units 1 st.︱sanding width 150 mm︱Sanding height max. 150 mm︱
          Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush <300 mm Frequency converter for stepless adjustment of the Spindle speed 200-800 rpm Table size 400 x 800 mm two directions of rotation selectable Operating voltage 110/240 V 50/60 Hz Exhaust connection D = 100 mm Weight 100 kg including grooved body D = 180, L = 150 placement with SmartFlex grinding blades CE - execution (technical details according to manufacturer - without guarantee!)
            Number of sanding units 1 st.
            sanding width 150 mm
            Sanding height max. 150 mm
            Description :
            Loewer edge finishing machine MiniSpin N

            Machines for finishing and fine sanding of
            Edges and profiles with a grinding spindle
            horizontal or vertical.

            Motor 0,75 KW

            Spindle in vertical position for machining edges

            Pivoted spindle in horizontal position, laterally
            etc. for processing longer profile bars or
            Conjunction with a combined grinding head for grinding
            of edges with a grinding disc blades

            Grinding head swiveling + / - 20 ° for editing
            oblique lines

            Working height / width 150 mm

            max. Diameter roller / brush <300 mm

            Frequency converter for stepless adjustment of the
            Spindle speed 200-800 rpm

            Table size 400 x 800 mm

            two directions of rotation selectable

            Operating voltage 110/240 V 50/60 Hz

            Exhaust connection D = 100 mm

            Weight 100 kg

            including grooved body D = 180, L = 150 placement
            with SmartFlex grinding blades

            CE - execution

            (technical details according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5580 · Sanding machine

          LÖWER - DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 190 mm︱Sanding height max. 2-180 mm︱
          LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneumatisch gesteuerte Schleifbandoszillation - effektive Schleifstaubabsaugung direkt an den Schleifwalzen Flugstaubabsaugung an den Spannrollen - integrierte Bürst- und Finisheinrichtung mit großer Schleifstaubabsaugung - motorische Schleifdickeneinstellung über Präzisionsgewindespindeln und großdimensionierten Linear- Kugel- lagersets auf gehärteten und geschliffenen Präzisions- wellen mit Staub- und Schmutzsicherung - Einstellung der Spanabnahme unten über Präzisionsgewindespindel mit Maßanzeige über Skalenring (Auflösung 0,1mm) - Schleifbandspannung über Pneumatikzylinder mit konstantem Spanndruck - Schleifbandwechsel mit pneumatischer Bandentspannung in Sekundenschnelle - Einstellmöglichkeit des Schleifbandlaufes bei Bandwechsel - elektropneumatische Druckluftüberwachung - Einlaufsicherung über Kontaktrolle bei zu dicken Werkstücken - Werkstücktransport über kalibrierte rutsch- und haftfeste Transportbänder über schwere, 1000mm lange Gußtische mit feinstgehobelter Oberfläche und gefederten Andruckrollen mit Feineinstellung - Kardanwellenantrieb für ruckfreien und gleichmäßigen Werkstücktransport - Vorschubgetriebemotor mit drei unterschiedlichen Vorchubgeschwindigkeiten zur schnellen Anpassung an verschiedene Holzarten - alle Motoren ekektrisch abgesichert - ergonomisch angeordnete Bedienelemente an der Werkstückeinlaufseite - automatische Werkstückstärkenabtastung (kein vorheriges Messen notwendig) - digitale Stärkenanzeige (Auflösung 0,1mm) mit modernem Magnetbandsystem Technische Daten: - Schleifbandgeschwindigkeit: 22 m/s - Schleifbandlänge: 1800mm - Schleifbandbreite:200mm - Arbeitsbreite: 190mm - Schleifdicke: 2-180mm - zwei Bremsmotoren für Antrieb: 5,5 kW - Vorschubmotor: 1,0 kW - Vorschubgeschwindigkeit: 6, 11 und 16 m/min. - automatische Höhenverstellung: 0,37 kW - zwei Bürstenaggregate mit Fibrebürsten D 120 x 200mm à 0,37 kW - Absaugstutzen: 2 x 120mm und 2 x 150mm - Pneumatikanschluß 6 bar - Arbeitshöhe: 850mm - Länge: 2105mm - Länge mit Bedienteil 2490mm - Breite: 880mm - Höhe: 1910mm - Gewicht: ca. 1500 kg - Betriebsspannung: 400 Volt, 50 Hz, 3P - CE-Ausführung ------------------------------------------------------------------------- Grundpreis der Maschine auf Anfrage! ------------------------------------------------------------------------- Sonderzubehör: stufenloser Vorschub 4-20 m/min. zur Geschwindigkeitsanpassung an Vormaschine Preis netto in Euro: 1.150,00 Werkstückabblasung - mittels Düsen von oben und unten am Maschinenauslauf angeordnet, pneumatisch gesteuert Preis netto in Euro: 600,00 Schleifbandausblasung - über Düsen direkt an den Radien der Spannrollen innerhalb der Absaugung angeordnet, separat zuschaltbar Preis netto in Euro: 540,00 Querverschiebung der kompletten Maschine - einstellbar 50-100mm oszillierend zur gleichmäßigeren Ausnutzung von Schleifbändern, Finishwerkzeugen und Transportsystem, Getriebemotor 0,37kW (nicht verfügbar in Verbindung mit Disc/Softdisc Aggregat) Preis netto in Euro: 3.670,00 Transportfreilauf-Einrichtung - bei Verkettung mit wenig Abstand zur Vormaschine Preis netto in Euro: 730,00 Externer Startimpuls der Maschine - über einen Taster inkl. Ansteuermöglichkeit über externe SPS-Steuerung (bei Verkettung in Fertigungsstraße) Preis netto in Euro: 680,00 DUPLO-Steuerung - zusätzliches Bedienteil zur Anbringung an eine vorgeschaltete Maschine mit folgenden Funktionen: - Starttaster - Not-Aus - Höhenverstellung Auf, Ab und 1/10 Ab - Digitale Stärkenanzeige - geschirmtes Spezialkabel, (max. 20m) Preis netto in Euro: 2.990,00 (technische Angaben laut Hersteller - ohe Gewähr!) Alle angegebenen Preis netto. zzgl. gesetzl. Mwst.
            Number of sanding units 2 St.
            sanding width 190 mm
            Sanding height max. 2-180 mm
            Description :
            LÖWER-Doppelseitige Schleifmaschine DSM 2000
            Doppelseitige Einzelholzschleifmaschine zum Schleifen von
            Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus-
            führung mit langen Gußtischen, Bürst- und Finisheinrichtung
            und Transportbandvorschub. Geeignet für hohe Dauerbelastung
            auch bei höheren Spanabnahmen.

            - versetzt angeordnete Schleif- und Finishaggregate oben und unten
            - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung
            - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig
            ebener Eingriffszone
            - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr
            guter Wärmeleitfähigkeit und absoluter
            Maßhaltigkeit
            - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere
            Schleifbandstandzeiten
            - zwangsgeführte pneumatisch gesteuerte Schleifbandoszillation
            - effektive Schleifstaubabsaugung direkt an den Schleifwalzen
            Flugstaubabsaugung an den Spannrollen
            - integrierte Bürst- und Finisheinrichtung mit großer Schleifstaubabsaugung
            - motorische Schleifdickeneinstellung über Präzisionsgewindespindeln und
            großdimensionierten Linear- Kugel-
            lagersets auf gehärteten und geschliffenen Präzisions-
            wellen mit Staub- und Schmutzsicherung
            - Einstellung der Spanabnahme unten über Präzisionsgewindespindel mit
            Maßanzeige über Skalenring (Auflösung 0,1mm)
            - Schleifbandspannung über Pneumatikzylinder mit konstantem Spanndruck
            - Schleifbandwechsel mit pneumatischer Bandentspannung in Sekundenschnelle
            - Einstellmöglichkeit des Schleifbandlaufes bei Bandwechsel
            - elektropneumatische Druckluftüberwachung
            - Einlaufsicherung über Kontaktrolle bei zu dicken Werkstücken
            - Werkstücktransport über kalibrierte rutsch- und haftfeste Transportbänder
            über schwere, 1000mm lange Gußtische mit feinstgehobelter Oberfläche und
            gefederten Andruckrollen mit Feineinstellung
            - Kardanwellenantrieb für ruckfreien und gleichmäßigen Werkstücktransport
            - Vorschubgetriebemotor mit drei unterschiedlichen Vorchubgeschwindigkeiten zur
            schnellen Anpassung an verschiedene Holzarten
            - alle Motoren ekektrisch abgesichert
            - ergonomisch angeordnete Bedienelemente an der Werkstückeinlaufseite
            - automatische Werkstückstärkenabtastung (kein vorheriges Messen notwendig)
            - digitale Stärkenanzeige (Auflösung 0,1mm) mit modernem Magnetbandsystem

            Technische Daten:
            - Schleifbandgeschwindigkeit: 22 m/s
            - Schleifbandlänge: 1800mm
            - Schleifbandbreite:200mm
            - Arbeitsbreite: 190mm
            - Schleifdicke: 2-180mm
            - zwei Bremsmotoren für Antrieb: 5,5 kW
            - Vorschubmotor: 1,0 kW
            - Vorschubgeschwindigkeit: 6, 11 und 16 m/min.
            - automatische Höhenverstellung: 0,37 kW
            - zwei Bürstenaggregate
            mit Fibrebürsten D 120 x 200mm à 0,37 kW
            - Absaugstutzen: 2 x 120mm und 2 x 150mm
            - Pneumatikanschluß 6 bar
            - Arbeitshöhe: 850mm
            - Länge: 2105mm
            - Länge mit Bedienteil 2490mm
            - Breite: 880mm
            - Höhe: 1910mm
            - Gewicht: ca. 1500 kg
            - Betriebsspannung: 400 Volt, 50 Hz, 3P
            - CE-Ausführung
            -------------------------------------------------------------------------
            Grundpreis der Maschine auf Anfrage!
            -------------------------------------------------------------------------


            Sonderzubehör:

            stufenloser Vorschub 4-20 m/min.
            zur Geschwindigkeitsanpassung an Vormaschine
            Preis netto in Euro: 1.150,00

            Werkstückabblasung
            - mittels Düsen von oben und unten am Maschinenauslauf
            angeordnet, pneumatisch gesteuert
            Preis netto in Euro: 600,00

            Schleifbandausblasung
            - über Düsen direkt an den Radien der Spannrollen innerhalb
            der Absaugung angeordnet, separat zuschaltbar
            Preis netto in Euro: 540,00

            Querverschiebung der kompletten Maschine
            - einstellbar 50-100mm oszillierend zur gleichmäßigeren
            Ausnutzung von Schleifbändern, Finishwerkzeugen und
            Transportsystem, Getriebemotor 0,37kW
            (nicht verfügbar in Verbindung mit Disc/Softdisc Aggregat)
            Preis netto in Euro: 3.670,00

            Transportfreilauf-Einrichtung
            - bei Verkettung mit wenig Abstand zur Vormaschine
            Preis netto in Euro: 730,00

            Externer Startimpuls der Maschine
            - über einen Taster inkl. Ansteuermöglichkeit über externe
            SPS-Steuerung (bei Verkettung in Fertigungsstraße)
            Preis netto in Euro: 680,00

            DUPLO-Steuerung
            - zusätzliches Bedienteil zur Anbringung an eine
            vorgeschaltete Maschine mit folgenden Funktionen:
            - Starttaster
            - Not-Aus
            - Höhenverstellung Auf, Ab und 1/10 Ab
            - Digitale Stärkenanzeige
            - geschirmtes Spezialkabel, (max. 20m)
            Preis netto in Euro: 2.990,00


            (technische Angaben laut Hersteller - ohe Gewähr!)
            Alle angegebenen Preis netto. zzgl. gesetzl. Mwst.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 3000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6155 · Sanding machine

          LÖWER - DSM 3000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 290 mm︱Sanding height max. 180 mm︱
            Number of sanding units 2 St.
            sanding width 290 mm
            Sanding height max. 180 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DoubleMaster DSM 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6199 · Sanding machine

          LÖWER - DoubleMaster DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St︱sanding width 190 mm︱Sanding height max. 2 - 180 mm︱
            Number of sanding units 2 St
            sanding width 190 mm
            Sanding height max. 2 - 180 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER HBS 402


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6246 · Sanding machine

          LÖWER - HBS 402 - - neu -

          Technical details
          Number of sanding units 2 st.︱sanding width 390 mm︱Sanding height max. 390 mm︱
            Number of sanding units 2 st.
            sanding width 390 mm
            Sanding height max. 390 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ DBx2-200 Crossmaster


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5282 · Sanding machine

          LÖWER - LZ DBx2-200 Crossmaster - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 200 mm︱Sanding height max. 150 mm︱
            Number of sanding units 4 St.
            sanding width 200 mm
            Sanding height max. 150 mm


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine MB Roba Twin Flat  -Video-


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5343 · Sanding machine

          MB - Roba Twin Flat -Video- - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 100,150 mm︱Sanding height max. ,
            Number of sanding units 2 St.
            sanding width 100,150 mm
            Sanding height max. ,


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2004


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5088 · Sanding machine

          LÖWER - DSM 2004 - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 200 mm︱Sanding height max. 180 mm︱
          LÖWER double-sided grinding machine DSM 2004 Double-sided four-belt single wood sander for Sanding solid wood such as window wood etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removal. - successively arranged grinding aggregates for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free power transmission - maintenance and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - Forced cooling of the grinding zones for cooler grinding and longer grinding belt service life - forcibly guided, pneumatically controlled sanding belt oscillation - Effective grinding dust extraction directly on the grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal below via precision threaded spindle with dimension display via scale ring (resolution 0.1mm) - Grinding belt tension via pneumatic cylinder with constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Possibility of adjusting the sanding belt run tape change - electropneumatic compressed air monitoring - Inlet protection via contact roller if too thick workpieces - Workpiece transport via calibrated slip and stick solid conveyor belts over heavy cast iron tables finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and smooth workpiece transport - Feed geared motor with stepless speed 4-20m/min - all motors are electrically protected - Ergonomically arranged controls - automatic workpiece thickness scanning (no previous measuring necessary) - digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical specifications: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Abrasive belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Extraction connection 2 x 180mm, 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length 2620mm - Width 920mm - Height 1890mm - Weight about 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version Special accessories: workpiece blow-off - by means of nozzles from above and below at the machine outlet arranged, pneumatically controlled Price on request! Abrasive belt blow-out 4-band via nozzles directly on the radii of the tensioning rollers inside arranged in the suction area, can be switched on separately Price on request! Disc unit for defibering - two abrasive flap discs with a diameter of 180mm (max. sanding width 180mm) - Adjustable laterally and in delivery - including frequency converter for stepless speed control instead of standard brushing and finishing equipment Price on request! other special accessories on request! (technical data according to the manufacturer - without guarantee!)
            Number of sanding units 4 St.
            sanding width 200 mm
            Sanding height max. 180 mm
            Description :
            LÖWER double-sided grinding machine DSM 2004
            Double-sided four-belt single wood sander for
            Sanding solid wood such as window wood etc.
            Highly stable top design with innovative details. Suitable
            for high continuous loads even with higher chip removal.
            - successively arranged grinding aggregates for pre-grinding,
            Fine sanding and finishing sanding, each from above and below
            1. Belt sanding unit with heavy steel roller
            2. Belt sanding unit with rubberized roller and shoe
            3. Finishing unit with fiber brush
            - Directly driven grinding rollers for slip-free
            power transmission
            - maintenance and wear-free CERMET-coated grinding
            shoes with very good thermal conductivity and absolute
            dimensional accuracy
            - Forced cooling of the grinding zones for cooler grinding
            and longer grinding belt service life
            - forcibly guided, pneumatically controlled sanding belt
            oscillation
            - Effective grinding dust extraction directly on the
            grinding rollers
            - Airborne dust extraction on the tension rollers
            - Integrated brushing and finishing device with large
            grinding dust extraction
            - Motorized grinding thickness adjustment via precision
            threaded spindles and large-dimensioned linear ball
            bearing sets on hardened and ground precision
            shafts with dust and dirt protection
            - Adjustment of the chip removal below via precision
            threaded spindle with dimension display via scale ring
            (resolution 0.1mm)
            - Grinding belt tension via pneumatic cylinder with
            constant clamping pressure
            - Sanding belt change with pneumatic belt relaxation
            Within seconds
            - Possibility of adjusting the sanding belt run
            tape change
            - electropneumatic compressed air monitoring
            - Inlet protection via contact roller if too thick
            workpieces
            - Workpiece transport via calibrated slip and stick
            solid conveyor belts over heavy cast iron tables
            finely planed surface and spring-loaded pressure rollers
            with fine adjustment
            - Cardan shaft drive for smooth and smooth
            workpiece transport
            - Feed geared motor with stepless speed
            4-20m/min
            - all motors are electrically protected
            - Ergonomically arranged controls
            - automatic workpiece thickness scanning (no previous
            measuring necessary)
            - digital thickness display (resolution 0.1mm) with modern
            magnetic tape system

            Technical specifications:
            - Sanding belt speed 22 m/s
            - Sanding belt length 1800mm
            - Abrasive belt width 200mm
            - Working width 190mm
            - Grinding thickness 2-180mm
            - four brake motors for drive 5.5 kW
            - Feed motor 1.5 kW
            - Feed speed 4-20 m/min.
            - automatic height adjustment 0.37 kW
            - two brush units
            with fiber brushes D 120 x 200mm at 0.37 kW
            - Extraction connection 2 x 180mm, 2 x 120mm
            - Extraction air speed 20 m/s
            - Pneumatic connection 6 bar
            - Working height 870mm
            - Length 2620mm
            - Width 920mm
            - Height 1890mm
            - Weight about 3300 kg
            - Operating voltage 400 volts, 50 Hz, 3P
            - CE version

            Special accessories:

            workpiece blow-off
            - by means of nozzles from above and below at the machine outlet
            arranged, pneumatically controlled

            Price on request!

            Abrasive belt blow-out 4-band
            via nozzles directly on the radii of the tensioning rollers inside
            arranged in the suction area, can be switched on separately

            Price on request!

            Disc unit for defibering
            - two abrasive flap discs with a diameter of 180mm
            (max. sanding width 180mm)
            - Adjustable laterally and in delivery
            - including frequency converter for stepless speed control
            instead of standard brushing and finishing equipment

            Price on request!

            other special accessories on request!

            (technical data according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER Leistomat SD Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6368 · Sanding machine

          LÖWER - Leistomat SD Video - - neu -

          Technical details
          Number of sanding units 8 st.︱sanding width 180 (260) mm︱Sanding height max. 160 mm︱Dimensions (L/W/H) 3065x1600x1900 mm︱weight of the machine ca. 1500 kg︱
          Window single wood intermediate sanding machine Löwer LeistoMat SD Automatic fine sanding machine for wood sanding (smoothing, defibrating and edge breaking) or intermediate sanding of profiled window latches. With soft disc Technology for the visible surfaces as well as automatic profile and width setting. - 2 lateral lamellar roller units each 0.75kW, L=120mm, D=200mm - 1 Softisc unit Ø=200mm above 0.75kW, 1 lamella roller unit L=200mm above 0.75kW, - 1 soft disc unit Ø=200mm below 0.75kW, 1 lamella roller unit L=200mm below 0.75kW, - 2 lateral lamellar roller units each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened shafts - Time-controlled immersion of all lamellar roller units directly above the incoming workpiece edges. By immersing it is possible To be able to insert aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - Variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and lateral rollers) - Disc units as a soft disc with Velcro for grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with stepless speed 4-15m/min - Parameters that can be set via touch panel are workpiece thickness, workpiece width (left side units individually), immersion depth side units, spindle speed, feed rate - Storage of parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the profile shape (Workpiece height is set in advance) - Pneumatically clocked driven feed roller, automatic clamping of the workpiece and infeed after unit adjustment - Indicator lights red/green to indicate operational readiness - shortest workpiece length 380mm - Conveyor belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1600 x 1900, length completely: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Option: - Set of grinding flaps for Leistomat SD (Softdisc) for all rolls, consisting of Area aggregates: 30 strips EH45 / 200 - 7 30 strips EH45 / 200 - 20 folding units: 64 strips M55 / 120 - 4 - Sandpaper disc H Ø200mm K 220 for soft disc D=200mm grit 220 with velor backing (Velcro), PU 100 pcs. (Technical description according to the manufacturer - without guarantee!)
            Number of sanding units 8 st.
            sanding width 180 (260) mm
            Sanding height max. 160 mm
            Dimensions (L/W/H) 3065x1600x1900 mm
            weight of the machine ca. 1500 kg
            Description :
            Window single wood intermediate sanding machine Löwer LeistoMat SD

            Automatic fine sanding machine for wood sanding (smoothing, defibrating and
            edge breaking) or intermediate sanding of profiled window latches. With soft
            disc
            Technology for the visible surfaces as well as automatic profile and
            width setting.

            - 2 lateral lamellar roller units each 0.75kW, L=120mm, D=200mm
            - 1 Softisc unit Ø=200mm above 0.75kW, 1 lamella roller unit
            L=200mm above 0.75kW,
            - 1 soft disc unit Ø=200mm below 0.75kW, 1 lamella roller unit
            L=200mm below 0.75kW,
            - 2 lateral lamellar roller units each 0.75kW, L=120mm, D=200mm

            - Linear guidance of all grinding units via linear ball bearing sets
            hardened shafts
            - Time-controlled immersion of all lamellar roller units directly above
            the incoming workpiece edges. By immersing it is possible
            To be able to insert aggregates deeper into the profiles.
            - Motorized workpiece thickness adjustment of the machine
            - Variable grinding flap speed via frequency converter to adjust the
            Grinding intensity using frequency converters (separately for discs,
            surface rollers and lateral rollers)
            - Disc units as a soft disc with Velcro for grinding wheels
            (wood pulp)

            - Feed via three lower and one upper conveyor belt and spring-loaded
            Pressure rollers with stepless speed 4-15m/min
            - Parameters that can be set via touch panel are workpiece thickness,
            workpiece width
            (left side units individually), immersion depth side units,
            spindle speed, feed rate
            - Storage of parameters as machine programs in program mode
            - Working in automatic mode with non-contact
            Workpiece width detection and profile detection as well as automatic
            Adjustment of the sanding units to the workpiece width and the profile shape
            (Workpiece height is set in advance)

            - Pneumatically clocked driven feed roller, automatic clamping
            of the workpiece and infeed after unit adjustment
            - Indicator lights red/green to indicate operational readiness
            - shortest workpiece length 380mm
            - Conveyor belt width 200mm
            - max. workpiece width 180mm (260mm in the envelope process)
            - Workpiece height 12-160mm
            - Suction connection 4 x 100mm and 2x80mm diameter
            - sensor-controlled tool blow-off directly on the discs
            - Length (housing) x width x height (mm): 3065x 1600 x 1900, length
            completely:
            4365mm (including roller conveyor with integrated workpiece width detection)
            - Weight: 1500kg
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version

            Option:

            - Set of grinding flaps for Leistomat SD (Softdisc)
            for all rolls, consisting of
            Area aggregates:
            30 strips EH45 / 200 - 7
            30 strips EH45 / 200 - 20
            folding units:
            64 strips M55 / 120 - 4

            - Sandpaper disc H Ø200mm K 220 for soft disc
            D=200mm grit 220
            with velor backing (Velcro), PU 100 pcs.


            (Technical description according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Expert


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2717 · Sanding machine

          HESS - Expert - - gebraucht -

          Technical details
          Number of sanding units 4 St︱sanding width 190 mm︱Sanding height max. 4-180 mm︱weight 4200 kg︱
          Hess Expert 4-belt single wood sanding machine -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on calibrated ones Conveyor belts with infinitely adjustable feed speed. Automatic machine stop triggering by wood thickness control device. Visual display on the control panel and via flashing lights on the machine. Inlet table via fine-running, precise threaded spindle for lower Grinding chip removal via digital display in the control panel (resolution 0.01 mm) motor adjustable. The long column table guide guarantees absolute Parallel adjustment. The flight circle coordination to the exit table is carried out by Height adjustment of the lower grinding units via precise threaded spindle Scale display (resolution 0.1 mm). Oscill setup. Utilization of the sanding belt to increase service life Sanding belts and improvement of the surface finish through motorized sanding and brush unit transverse displacement. Clear, user-friendly arrangement of all electrical functions and operating and display elements in the control panel: Grinding unit below (pre-grinding regrinding), grinding unit on top, (pre-grinding-regrinding), automatic. Star- Triangle start control of the grinding motors, belt utilization oscillation, brushing and finish device (bottom = top), central height adjustment with digital Dimension display, height adjustment of the infeed table with digital dimension display, Operating display, fault display. Stop and emergency stop button. 2 potential-free contacts for pre-machine feed stop in the event of a malfunction. Electrical protection of all motors against overload Technical data : Sanding belt speed 25 m/sec. Grinding width 190 mm Grinding thickness 4 - 180 mm Shortest workpiece length 280 mm Feed speed continuously adjustable 5 - 25 m/min. Sanding belt dimensions 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection 380 V., 3/N, 50 Hz. Pneumatic connection R 3/8", 6 bar, 80 NL Total connected load approx. 26 kW (at maximum load) =Grinding units 4 x 5.5 kW =Brushing and finishing device 2 x 0.75 kW =feed 1.1 kW =central height adjustment 0.55 kW =Height adjustment Inlet table 0.06 kW =Grinding belt utilization oscillation 0.12 kW Exhaust air volume 3 x at least 2500 m³/h, 20 - 25 m/sec. Suction connection piece 3 x 180 mm diameter, at the top of the machine housing External dimensions 2450mm width 1900mm height 1200mm depth Working height 830 mm Weight: approx. 4200 kg Paint finish: RAL 7013 stone gray with RAL 1018 zinc yellow If the transport facilities for delivery and removal are not available are supplied, the customer must ensure that delivery is possible the wood guide and the transverse push-off for possible removal are installed. Danger ! The height settings of the infeed and outfeed Equipment must be precisely coordinated with the grinding machine. Workpiece blow-off device after Brushing and finishing device using flat jet nozzles, below and arranged at the top with solenoid control valve, separate maintenance unit and pressure control, with control for automatic. Shutdown if no workpiece transport takes place. Maximum air consumption: 4000 NL/h at 4 bar (only for workpiece transport) Technical information according to the manufacturer, without guarantee!
            Number of sanding units 4 St
            sanding width 190 mm
            Sanding height max. 4-180 mm
            weight 4200 kg
            Description :
            Hess Expert 4-belt single wood sanding machine
            --------------------------------------
            Ø Grinding at the bottom/top
            Ø With 2 offset grinding units each (bottom and top)
            Ø Grinding units (bottom and top) connected in series according to the
            Dressing principle
            Ø Pre-sanding with coarse grit (calibrate)
            Ø Regrinding with fine grit (finish)
            Ø Central motorized height adjustment of the lower grinding units
            Ø Central motorized and synchronous height adjustment of the entire upper
            Grinding and brushing units including the upper transport units
            Ø Oscillating sanding belt utilization (during the sanding process)
            Ø Absolute power connection thanks to 5.5 KW motors and large dimensions
            drive drums
            Ø Oxide ceramic grinding shoe for
            - exact surface geometry
            - no adjustment work
            - permanent dimensional accuracy
            - completely maintenance and wear-free

            Basic structure:
            Stable, heavy welded construction made of strong-walled rectangular profiles
            additional, statically calculated reinforcements for optimal
            Vibration dampening.

            Staggered grinding units with large dimensions
            Belt drive drums for slip-free belt running. Two-point suction for direct
            and flying dust with sealing brushes and integrated sanding belt blow-off
            Device to increase the service life of the sanding belts. Grinding units in
            heavy steel plate construction as the basis for vibration-damped,
            quiet tape running. Absolutely backlash-free guides as ball linear sets
            hardened and ground shafts. Height adjustment of the grinding units
            via hardened and ground special linear guides as well as pre-tensioned ones
            Guide carriage. Permanent precision thanks to dust and dirt protection
            Ball linear sets and guide carriages.
            Large-sized pre-grinding rollers as contact rollers. Contact rollers and
            Sanding shoes in a balanced ratio to the sanding belt grain load.
            The large drive drums guarantee full transmission
            the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore
            Slip-free, stable running and optimal heat dissipation. This makes it the
            strongest
            Chip removal possible. Automatic machine stop activation in the event of a belt
            break.
            Visual display on the control panel and via flashing lights on the machine.
            Sanding shoes for finish completely maintenance-free and wear-free made of
            oxide ceramic
            with optimal heat dissipation.
            Grinding belt tension via appropriately sized compression springs.
            Sanding belt relaxation for belt changing using a pneumatic device
            sensitive, distortion-free placement of new tapes.
            Upper grinding unit and brush device centrally motorized
            Height adjustable with digital display in the control panel for the motorized
            Grinding thickness adjustment.

            Brushing and finishing device, for better surface finish, integrated into
            the basic machine. Two special brush rollers 150 mm Æ arranged one above the
            other
            in synchronous function for advance
            thrust. Separate height adjustment of the brush rollers on precise
            Carriage guides for post-correction of wear. Additional transport roller for
            Removal or further transport of the workpiece from the automatic grinding
            machine
            with the conveyor belt.

            Wooden guide in the inlet area for hard guide and bearings mounted on both sides
            pressure rollers. Safe transport of profiled workpieces on calibrated ones
            Conveyor belts with infinitely adjustable feed speed.
            Automatic machine stop triggering by wood thickness control device.
            Visual display on the control panel and via flashing lights on the machine.

            Inlet table via fine-running, precise threaded spindle for lower
            Grinding chip removal via digital display in the control panel (resolution 0.01
            mm)
            motor adjustable. The long column table guide guarantees absolute
            Parallel adjustment. The flight circle coordination to the exit table is
            carried out by
            Height adjustment of the lower grinding units via precise threaded spindle
            Scale display (resolution 0.1 mm).

            Oscill setup. Utilization of the sanding belt to increase service life
            Sanding belts and improvement of the surface finish through motorized sanding
            and brush unit transverse displacement.

            Clear, user-friendly arrangement of all electrical functions and operating
            and display elements in the control panel: Grinding unit below (pre-grinding
            regrinding), grinding unit on top, (pre-grinding-regrinding), automatic. Star-
            Triangle start control of the grinding motors, belt utilization oscillation,
            brushing
            and finish device (bottom = top), central height adjustment with digital
            Dimension display, height adjustment of the infeed table with digital dimension
            display,
            Operating display, fault display. Stop and emergency stop button.

            2 potential-free contacts for pre-machine feed stop in the event of a
            malfunction.
            Electrical protection of all motors against overload

            Technical data :

            Sanding belt speed 25 m/sec.
            Grinding width 190 mm
            Grinding thickness 4 - 180 mm
            Shortest workpiece length 280 mm
            Feed speed continuously adjustable 5 - 25 m/min.
            Sanding belt dimensions 200 mm width, 1850 mm length
            Electrical equipment according to VDE
            Electrical connection 380 V., 3/N, 50 Hz.
            Pneumatic connection R 3/8", 6 bar, 80 NL
            Total connected load approx. 26 kW (at maximum load)
            =Grinding units 4 x 5.5 kW
            =Brushing and finishing device 2 x 0.75 kW
            =feed 1.1 kW
            =central height adjustment 0.55 kW
            =Height adjustment Inlet table 0.06 kW
            =Grinding belt utilization oscillation 0.12 kW
            Exhaust air volume 3 x at least 2500 m³/h, 20 - 25 m/sec.
            Suction connection piece 3 x 180 mm diameter, at the top of the machine housing
            External dimensions
            2450mm width
            1900mm height
            1200mm depth
            Working height 830 mm
            Weight: approx. 4200 kg

            Paint finish: RAL 7013 stone gray with RAL 1018 zinc yellow

            If the transport facilities for delivery and removal are not available
            are supplied, the customer must ensure that delivery is possible
            the wood guide and the transverse push-off for possible removal
            are installed. Danger ! The height settings of the infeed and outfeed
            Equipment must be precisely coordinated with the grinding machine.


            Workpiece blow-off device after
            Brushing and finishing device using flat jet nozzles, below and
            arranged at the top with solenoid control valve, separate maintenance unit
            and pressure control, with control for automatic. Shutdown if
            no workpiece transport takes place. Maximum air consumption:
            4000 NL/h at 4 bar (only for workpiece transport)

            Technical information according to the manufacturer, without guarantee!


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Junior


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2699 · Sanding machine

          HESS - Junior - - gebraucht -

          Technical details
          Number of sanding units 2 st.︱sanding width 190 mm︱Sanding height max. 4-150 mm︱
          Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full transmission of the 5.5 kW drive power of the grinding motors on the grinding belt. This means the strongest chip removal possible. Automatic machine stop triggering if the tape breaks. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding lining. Easy to use pad change. Abrasive belt tension over appropriately dimensioned compression springs. Sanding belt relaxation for belt change by means of pneumatic Device for sensitive, distortion-free loading of new tapes. Upper Grinding unit and brush device (additional equipment) centrally motorized adjustable. Timber guide in the entry area for hard guide and guide rails supported on both sides pinch rollers. Tilt-proof transport of profiled workpieces calibrated conveyor belts with continuously adjustable feed rate. Automatic machine stop triggering by wood thickness control device. Optical display of the control panel. Infeed table via fine, precise threaded spindle for lower Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The length Column table guidance guarantees an absolute parallel adjustment. The Adjustment of the flight circle to the outfeed table is achieved by adjusting the height of the lower one Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functional, operating and display elements on the front of the machine: grinding unit below, Grinding unit above, workpiece transport device, Grinding thickness setting, brushing device above/below, belt utilization, Operating display, fault display. All motors are against overload electrically secured. Technical specifications : --------------------------------- Sanding belt speed: 25 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection : 400 V., 3/N, 50 Hz. Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW height adjustment : 0.18 kW Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air quantity: 2 x 2000 to 2500 m3/h 20 - 25 m/sec. Extraction connection piece: 2 x 180 mm dia, on top of the machine housing External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000 mm deep with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep Working height: 835 mm in the range of 4-20 mm only without guide rule Paint : RAL 7030 stone gray with RAL 1018 zinc yellow Additional equipment: 1 digital display for engine. grinding thickness adjustment 1 facility for Oscillation. Abrasive belt utilization device for oscillating Abrasive belt utilization to increase the service life of the abrasive belts and improvement of the surface finish by motor-driven adjustment of the grinding unit. Connection value: 0.12 kW, 380 V, 3/N, 50 Hz 1 brush and finish device, for better surface finish, integrated in the basic machine. Two special brush rollers 150 mm arranged one above the other Diameter in synchronism function to the feed. Separate height adjustment Brush rollers on precise carriage guides for post-wear correction. 1 pneumatic workpiece release device after brushing and finishing Furnishings Pictures and VIDEO shows machine of the same type Option: 1 piece unpowered roller conveyor as infeed 1 pc. driven conveyor belt with pusher, length 3 m 2 non-driven roller conveyors as a return to the operator (Technical data according to the manufacturer, without guarantee!)
            Number of sanding units 2 st.
            sanding width 190 mm
            Sanding height max. 4-150 mm
            Description :
            Hess Junior single wood sander
            ---------------------------------

            basic structure:

            Stable, heavy welded construction made of thick-walled rectangular hollow
            profiles
            with additional, statically calculated bracing for optimal
            vibration damping.

            Staggered grinding units with large dimensioned
            Belt drive drums for slip-free belt travel. Two-point suction for direct
            and airborne dust extraction with integrated blow-off device. grinding units
            in heavy steel plate construction as the basis for vibration-damped,
            quiet belt run. All guides as a ball linear set on hardened and
            polished waves. Lasting precision thanks to protection against dust and dirt
            of the sphere linear sets. Contact roller and sanding pad in a balanced ratio
            to the grinding belt grain load. The large dimensioned drive drums
            guarantee the full transmission of the 5.5 kW drive power of the
            grinding motors on the grinding belt. This means the strongest chip removal
            possible. Automatic machine stop triggering if the tape breaks. Optical display
            on control panel. Sanding shoe for finish made of special material with optimal
            Heat dissipation and additional sliding lining. Easy to use
            pad change. Abrasive belt tension over appropriately dimensioned
            compression springs. Sanding belt relaxation for belt change by means of
            pneumatic
            Device for sensitive, distortion-free loading of new tapes. Upper
            Grinding unit and brush device (additional equipment) centrally motorized
            adjustable.

            Timber guide in the entry area for hard guide and guide rails supported on both
            sides
            pinch rollers. Tilt-proof transport of profiled workpieces
            calibrated conveyor belts with continuously adjustable
            feed rate.

            Automatic machine stop triggering by wood thickness control device.
            Optical display of the control panel.

            Infeed table via fine, precise threaded spindle for lower
            Grinding chip removal manually adjustable via scale (resolution 0.1 mm). The
            length
            Column table guidance guarantees an absolute parallel adjustment. The
            Adjustment of the flight circle to the outfeed table is achieved by adjusting
            the height of the lower one
            Grinding unit via precise threaded spindle and scale display (resolution 0.1
            mm) accomplished.

            Clear, user-friendly arrangement of all electrical functional, operating
            and display elements on the front of the machine: grinding unit below,
            Grinding unit above, workpiece transport device,
            Grinding thickness setting, brushing device above/below, belt utilization,
            Operating display, fault display. All motors are against overload
            electrically secured.

            Technical specifications :
            ---------------------------------

            Sanding belt speed: 25 m/sec.
            Grinding width: 190 mm
            Grinding thickness: 4 - 150 mm
            Shortest workpiece length: 280 mm

            Feed speed, continuously adjustable 5 - 25 m/min.

            Sanding belt dimensions: 200 mm width, 1850 mm length

            Electrical equipment according to VDE

            Electrical connection : 400 V., 3/N, 50 Hz.

            Pneumatic connection: R 3/8", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed:
            0.75 kW height adjustment : 0.18 kW

            Pneumatic connection: R 3/8", 80 NL, min. 6 bar, max. 8 bar Extraction air
            quantity: 2 x
            2000 to 2500 m3/h 20 - 25 m/sec.

            Extraction connection piece: 2 x 180 mm dia, on top of the machine housing

            External dimensions: without control cabinet 1750 mm wide, 1850 mm high, 1000
            mm deep

            with control cabinet 1960 mm wide, 1850 mm high, 1000 mm deep

            Working height: 835 mm

            in the range of 4-20 mm only without guide rule
            Paint : RAL 7030 stone gray with RAL 1018 zinc yellow

            Additional equipment:

            1 digital display for engine. grinding thickness adjustment

            1 facility for Oscillation. Abrasive belt utilization device for oscillating
            Abrasive belt utilization to increase the service life of the abrasive belts
            and improvement
            of the surface finish by motor-driven adjustment of the grinding unit.
            Connection value: 0.12 kW, 380 V, 3/N, 50 Hz

            1 brush and finish device, for better surface finish, integrated in
            the basic machine. Two special brush rollers 150 mm arranged one above the other
            Diameter in synchronism function to the feed. Separate height adjustment
            Brush rollers on precise carriage guides for post-wear correction.

            1 pneumatic workpiece release device after brushing and finishing
            Furnishings

            Pictures and VIDEO shows machine of the same type

            Option:
            1 piece unpowered roller conveyor as infeed
            1 pc. driven conveyor belt with pusher, length 3 m
            2 non-driven roller conveyors as a return to the operator

            (Technical data according to the manufacturer, without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ 8


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6478 · Sanding machine

          LÖWER - LZ 8 - - 2008 -

          Technical details
          Number of sanding units 8 st.︱sanding width 150 mm︱
          Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area. By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles. - Timed replacement of the rotating in synchronism Aggregate - motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button - Display of workpiece thickness via digital display with modern magnetic tape system - Variable grinding disc speed via frequency converter to adapt the grinding intensity to different Primers by means of frequency converters 200-1000 rpm - Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width - Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the Abrasive blade aggregates on the selected profile - modern PLC control for easy operation of the machine - Suction connection 5 x 100mm diameter - Length (body) x width x height (mm): 2600 x 1500 x 1600 Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition) - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Technical specifications: Number of sanding units: 8 pcs. Surface brush width: max. 150 mm Working height: max. 100 mm Surface Brush Motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed rate: 4-20 M / min Feed stepless Speed ??controller grinding units Automatic width detection Digital magnetic tape gauge Extraction nozzle: 5 x 100 mm Air requirement: 5 x 565 m3 / h Minimum air velocity at the connection of the machine: 20 m / s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg WITH inlet roller conveyor ------------------------------------- Price of the Löwer amchine on request! he return conveyor device that can be seen in the pictures is no longer available and is NOT included in the scope of delivery (Technical data according to manufacturer - without guarantee!)
            Number of sanding units 8 st.
            sanding width 150 mm
            Description :
            Machine can be inspected during production!

            Leistomat - Finisch and intermediate leveling machine Löwer LZ 8
            -------------------------------------------------- -------------------

            for finish sanding (smoothing, defibering and edge breaking)
            or intermediate sanding profiled window latch
            - Finish and intermediate sanding machine with eight sanding blade aggregates,
            2 surface units at the top (synchronism / counter-rotation)
            2 surface units below (synchronism / counter-rotation)
            4 profile units with angled arrangement top right,
            bottom right, top left, bottom left, all mating
            - linear guidance of all grinding units over
            Linear ball bearing sets on hardened shafts
            - Timed immersion of all in the opposite direction
            rotating grinding units directly above the incoming
            Workpiece edges to avoid looping through the
            Primer in the front edge area. By the
            It is possible to immerse the aggregates deeper in the
            Be able to deliver profiles.
            - Timed replacement of the rotating in synchronism
            Aggregate
            - motor workpiece thickness adjustment of the machine
            by means of motorized height adjustment via push button
            - Display of workpiece thickness via digital display with
            modern magnetic tape system
            - Variable grinding disc speed via frequency converter
            to adapt the grinding intensity to different
            Primers by means of frequency converters 200-1000 rpm
            - Workpiece width recognition at the machine infeed with
            automatic adjustment of the left grinding units
            to the current workpiece width
            - Profile preselection via selector switch on the machine inlet side
            as well as automatic adjustment of the
            Abrasive blade aggregates on the selected profile
            - modern PLC control for easy operation of the machine
            - Suction connection 5 x 100mm diameter
            - Length (body) x width x height (mm): 2600 x 1500 x 1600
            Length complete: 3600mm (including roller conveyor with
            integrated workpiece width recognition)
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version


            Technical specifications:

            Number of sanding units: 8 pcs.

            Surface brush width: max. 150 mm
            Working height: max. 100 mm
            Surface Brush Motor: 0.75 kW
            Side brush motor: 0.37 kW
            Brush speed: 1380 rpm
            Feed motor: 1.1 kW
            Feed rate: 4-20 M / min
            Feed stepless

            Speed ??controller grinding units
            Automatic width detection
            Digital magnetic tape gauge

            Extraction nozzle: 5 x 100 mm
            Air requirement: 5 x 565 m3 / h
            Minimum air velocity at the connection of the machine: 20 m / s

            Dimensions:
            Length: 2600 mm
            Width: 1480 mm
            Height: 1700 mm

            Weight: 950 kg

            WITH inlet roller conveyor
            -------------------------------------
            Price of the Löwer amchine on request!

            he return conveyor device that can be seen in the pictures is no longer
            available and is NOT included in the scope of delivery


            (Technical data according to manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ/2 Leistenschleifmaschine


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2709 · Sanding machine

          LÖWER - LZ/2 Leistenschleifmaschine - - 2001 -

          Technical details
          Number of sanding units 1 st.︱sanding width 140 mm︱Sanding height max. 120 mm︱motor 2,2 kW︱Pitch min/max 6-12-16 m/min︱weight ca. 350 kg︱length 1.100 mm︱width 900 mm︱height 1.500 mm︱
          Löwer strip grinding machine LZ/2 --------------------------------- For the finish sanding and intermediate sanding of Strips of all kinds: - glazing beads - Blow bars - Roller shutter guide rails - Cover strips etc. Particularly fast processing thanks to simultaneous processing Sanding several strips next to each other. Conveyor belt feed with table bulge under sanding roller. Technical data: - 1 roller unit from above, working width 140 mm - Table length 1100 mm - Workpiece thickness adjustment 2-120 mm with numerical display - Drive motor 2.2 kW with 1430 rpm - mandrel - three feed speeds 6, 12 and 16 m/min - Inlet contact - Brush speed 10 - 50 Hz, continuously variable - Suction nozzle 2x100 mm - Operating voltage 400V, 50 Hz, 3 P - Air connection 6 bar - dust tested - CE version Special accessories: Automatic immersion, prevents grinding on the front edge, included Table extension --------------------------------- Price of the above machine on request! --------------------------------- (technical data according to the manufacturer - no guarantee!)
            Number of sanding units 1 st.
            sanding width 140 mm
            Sanding height max. 120 mm
            motor 2,2 kW
            Pitch min/max 6-12-16 m/min
            weight ca. 350 kg
            length 1.100 mm
            width 900 mm
            height 1.500 mm
            Description :
            Löwer strip grinding machine LZ/2
            ---------------------------------
            For the finish sanding and intermediate sanding of
            Strips of all kinds:
            - glazing beads
            - Blow bars
            - Roller shutter guide rails
            - Cover strips etc.

            Particularly fast processing thanks to simultaneous processing
            Sanding several strips next to each other. Conveyor belt feed
            with table bulge under sanding roller.

            Technical data:
            - 1 roller unit from above, working width 140 mm
            - Table length 1100 mm
            - Workpiece thickness adjustment 2-120 mm with numerical display
            - Drive motor 2.2 kW with 1430 rpm
            - mandrel
            - three feed speeds 6, 12 and 16 m/min
            - Inlet contact
            - Brush speed 10 - 50 Hz, continuously variable
            - Suction nozzle 2x100 mm
            - Operating voltage 400V, 50 Hz, 3 P
            - Air connection 6 bar
            - dust tested
            - CE version

            Special accessories:
            Automatic immersion, prevents grinding on the front edge, included
            Table extension
            ---------------------------------
            Price of the above machine on request!
            ---------------------------------

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine GÖCKEL G65w


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-06331 · Sanding machine

          GÖCKEL - G65w - - 1988 -

          Technical details
          weight 4 t︱swing diameter 650 mm︱centre distance 3500 mm︱
            weight 4 t
            swing diameter 650 mm
            centre distance 3500 mm


        • Christoph Busch GmbH
        • Dieselstr. 22
        • 41352 Korschenbroich
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          LÖWER - HESS - QUICKWOOD - GÖCKEL - MB -