Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Injection-moulding machines (plastic)

          Machinelist: Injection-moulding machines (plastic)


          Injection-moulding machines (plastic)

          used Injection Moulding Injection-moulding machines (plastic) ENGEL VC 80H/80L / 130 Combi


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200203 · Injection-moulding machines (plastic)

          ENGEL - VC 80H/80L / 130 Combi - - 2006 -

          Technical details
          clamping force 1.300 kN︱injection volume 106 / 43 cm³︱screw diameter 30 / 25 mm︱platen size 850 x 750 mm︱daylight between platens - max. 900 mm︱
            clamping force 1.300 kN
            injection volume 106 / 43 cm³
            screw diameter 30 / 25 mm
            platen size 850 x 750 mm
            daylight between platens - max. 900 mm
            Description :


          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 80/25 HLS


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200103 · Injection-moulding machines (plastic)

          ENGEL - ES 80/25 HLS - - 2003 -

          Technical details
          clamping force 250 kN︱injection volume 38 cm³︱screw diameter 22 mm︱platen size 470 x 280 mm︱daylight between platens - max. 480 mm︱
            clamping force 250 kN
            injection volume 38 cm³
            screw diameter 22 mm
            platen size 470 x 280 mm
            daylight between platens - max. 480 mm
            Description :

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech 35-115 viva


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L201201 · Injection-moulding machines (plastic)

          DEMAG - ergotech 35-115 viva - - 2000 -

          Technical details
          clamping force -- kN︱injection volume 47 cm³︱screw diameter 35 mm︱platen size 280 x 280 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 35 mm - Cylinder diameter: 22 mm - Spraying volume: 47 cm³ Clamping unit: - distance between tie bars: 280 x 280 mm - Operating hours approx.: 50000 h
            clamping force -- kN
            injection volume 47 cm³
            screw diameter 35 mm
            platen size 280 x 280 mm
            Description :
            Condition: used,

            Specification: Horizontal
            injection moulding machine,

            injection unit:
            - Screw diameter: 35 mm
            - Cylinder diameter: 22 mm
            - Spraying volume: 47 cm³

            Clamping unit:
            - distance between tie bars: 280 x 280 mm
            - Operating hours approx.: 50000 h

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech 150/475-440


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L201202 · Injection-moulding machines (plastic)

          DEMAG - ergotech 150/475-440 - - 1999 -

          Technical details
          clamping force -- kN︱injection volume 230 cm³︱screw diameter 40 mm︱platen size 475 x 475 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller
            clamping force -- kN
            injection volume 230 cm³
            screw diameter 40 mm
            platen size 475 x 475 mm
            Description :
            Condition: used,

            Specification: Horizontal
            injection moulding machine,

            injection unit:
            - Screw diameter: 40 mm
            - Cylinder diameter: 40 mm
            - Spraying volume: 230 cm³.

            Clamping unit:
            - tie bar distance: 475 x 475 mm
            - Operating hours approx.: 30000 h

            - Air valve
            - Core pull
            - 12-way hot runner controller


          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 1350/275 HL


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200102 · Injection-moulding machines (plastic)

          ENGEL - ES 1350/275 HL - - 1998 -

          Technical details
          clamping force 2.750 kN︱injection volume 735 cm³︱screw diameter 60 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 850 mm︱
            clamping force 2.750 kN
            injection volume 735 cm³
            screw diameter 60 mm
            platen size 1.050 x 900 mm
            daylight between platens - max. 850 mm
            Description :

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) DEMAG ergotech 50-270 pro


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L201203 · Injection-moulding machines (plastic)

          DEMAG - ergotech 50-270 pro - - 1997 -

          Technical details
          clamping force -- kN︱injection volume 146 cm³︱screw diameter 35 mm︱platen size 355 x 355 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 35 mm - Cylinder diameter: 35 mm - Spraying volume: 146 cm³. Clamping unit: - tie bar distance: 355 x 355 mm - Operating hours approx.: 50000 h - Air valve - Core pull
            clamping force -- kN
            injection volume 146 cm³
            screw diameter 35 mm
            platen size 355 x 355 mm
            Description :
            Condition: used,

            Specification: Horizontal
            injection moulding machine,

            injection unit:
            - Screw diameter: 35 mm
            - Cylinder diameter: 35 mm
            - Spraying volume: 146 cm³.

            Clamping unit:
            - tie bar distance: 355 x 355 mm
            - Operating hours approx.: 50000 h

            - Air valve
            - Core pull

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 750/200 W/250 HL 2F


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191105 · Injection-moulding machines (plastic)

          ENGEL - ES 750/200 W/250 HL 2F - - 1997 -

          Technical details
          clamping force 2.500 kN︱injection volume 392 cm³︱screw diameter 50 mm︱platen size 1.150 x 905 mm︱daylight between platens - max. 1.200 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Factory No.: 30883 Injection unit 1: - Screw diameter: 50 mm - Dosing stroke: 200 mm - Screw speed: 240 rpm - Injection flow: 291 cm³/sec - Injection volume: 392 cm³ - Injection weight: 353 g - Special injection pressure: 1,430 bar - Special injection pressure increased: 1,900 bar - Nozzle path: 650 mm - Heating capacity: 15,3 kW - Number of heating zones incl. nozzle: 5 Injection unit 2: - Screw diameter: 25 mm - Dosing stroke: 140 mm - Screw speed: 480 rpm - Injection flow: 88 cm³/sec - Injection volume: 69 cm³ - Injection weight: 61 g - Special injection pressure: 2,000 bar - Special injection pressure increased: 2,400 bar - Heating capacity: 6,6 kW - Number of heating zones incl. nozzle: 6 Clamping unit: - Clamping force max.: 2,500 kN - Mounting plates BAP: 1,150 x 905 mm HL - FAP clamping plates: 1,150 x 1,030 mm - Opening stroke: 850 mm - Distance between plates max.: 1,200 mm - Ejector travel: 200 mm - Ejector force: 83.0 kN Drive: - Pump drive power: 45 kW - Operating hours: 92680 hours Handling: ERC 63/1C integrated
            clamping force 2.500 kN
            injection volume 392 cm³
            screw diameter 50 mm
            platen size 1.150 x 905 mm
            daylight between platens - max. 1.200 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,
            Factory No.: 30883

            Injection unit 1:
            - Screw diameter: 50 mm
            - Dosing stroke: 200 mm
            - Screw speed: 240 rpm
            - Injection flow: 291 cm³/sec
            - Injection volume: 392 cm³
            - Injection weight: 353 g
            - Special injection pressure: 1,430 bar
            - Special injection pressure increased: 1,900 bar
            - Nozzle path: 650 mm
            - Heating capacity: 15,3 kW
            - Number of heating zones incl. nozzle: 5

            Injection unit 2:
            - Screw diameter: 25 mm
            - Dosing stroke: 140 mm
            - Screw speed: 480 rpm
            - Injection flow: 88 cm³/sec
            - Injection volume: 69 cm³
            - Injection weight: 61 g
            - Special injection pressure: 2,000 bar
            - Special injection pressure increased: 2,400 bar
            - Heating capacity: 6,6 kW
            - Number of heating zones incl. nozzle: 6

            Clamping unit:
            - Clamping force max.: 2,500 kN
            - Mounting plates BAP: 1,150 x 905 mm HL
            - FAP clamping plates: 1,150 x 1,030 mm
            - Opening stroke: 850 mm
            - Distance between plates max.: 1,200 mm
            - Ejector travel: 200 mm
            - Ejector force: 83.0 kN

            Drive:
            - Pump drive power: 45 kW
            - Operating hours: 92680 hours

            Handling: ERC 63/1C integrated

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) BATTENFELD BA 400-125 CDC


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L210202 · Injection-moulding machines (plastic)

          BATTENFELD - BA 400-125 CDC - - 1995 -

          Technical details
          clamping force 400 kN︱injection volume 58,9 cm³︱screw diameter 25 mm︱platen size -- mm︱
          Condition: used, Specification: horizontal injection moulding machine - second-hand injection unit: - screw diameter: 25 mm - shot volume max.: 58.9 cm³ - shot weight max.: 39,3 g - spec. injection pressure: 2749 bar Clamping unit: - clamping force: 400 kN - Max. installation height: 325 mm - distance between platens min.: 150 mm - platen distance max.: 475 mm - tie bar distance: 320 x 320 mm - Centring : 110 x 110 mm - Opening: 110 mm Special equipment: - Ejector force ejector: 26,4 kN - Ejector stroke: 100 mm
            clamping force 400 kN
            injection volume 58,9 cm³
            screw diameter 25 mm
            platen size -- mm
            Description :
            Condition: used,

            Specification: horizontal injection moulding machine
            - second-hand

            injection unit:
            - screw diameter: 25 mm
            - shot volume max.: 58.9 cm³
            - shot weight max.: 39,3 g
            - spec. injection pressure: 2749 bar

            Clamping unit:
            - clamping force: 400 kN
            - Max. installation height: 325 mm
            - distance between platens min.: 150 mm
            - platen distance max.: 475 mm
            - tie bar distance: 320 x 320 mm
            - Centring : 110 x 110 mm
            - Opening: 110 mm

            Special equipment:
            - Ejector force ejector: 26,4 kN
            - Ejector stroke: 100 mm

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 80/25 HLS


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200104 · Injection-moulding machines (plastic)

          ENGEL - ES 80/25 HLS - - 1994 -

          Technical details
          clamping force 250 kN︱injection volume 38 cm³︱screw diameter 22 mm︱platen size 470 x 280 mm︱daylight between platens - max. 480 mm︱
            clamping force 250 kN
            injection volume 38 cm³
            screw diameter 22 mm
            platen size 470 x 280 mm
            daylight between platens - max. 480 mm
            Description :

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL ES 700 / 175 STND


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L200401 · Injection-moulding machines (plastic)

          ENGEL - ES 700 / 175 STND - - 1992 -

          Technical details
          clamping force 1.750 kN︱injection volume 318 cm³︱screw diameter 45 mm︱platen size 700 x 700 mm︱daylight between platens - max. 460 mm︱
          Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL
            clamping force 1.750 kN
            injection volume 318 cm³
            screw diameter 45 mm
            platen size 700 x 700 mm
            daylight between platens - max. 460 mm
            Description :
            Condition: used,

            Specification: Horizontal injection moulding machine,

            Injection unit:
            - Screw diameter: 45 mm
            - Screw length L/D: 20
            - Spray volume: 318 cm³
            - Shot weight max.: 287 g
            - Special spraying pressure: 2,100 bar

            Clamping unit:
            - Max. clamping force: 1,750 kN
            - clamping plates: 700 x 700 mm
            - Opening path max.: 460 mm
            - mould installation height: 150 mm
            - Operating hours: 89217 h

            - 1x core puller
            - Handling / Robots: ENGEL

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) KRAUSS-MAFFEI KM-420-2300B2/90


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L190101 · Injection-moulding machines (plastic)

          KRAUSS-MAFFEI - KM-420-2300B2/90 - - 1989 -

          Technical details
          clamping force 4200 kN︱injection volume 572 - 1716 cm³︱screw diameter 90 mm︱platen size 1040 x 1040 mm︱closing stroke 620 mm︱
            clamping force 4200 kN
            injection volume 572 - 1716 cm³
            screw diameter 90 mm
            platen size 1040 x 1040 mm
            closing stroke 620 mm
          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ARBURG ALLROUNDER 305 ECO 700-230


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L191201 · Injection-moulding machines (plastic)

          ARBURG - ALLROUNDER 305 ECO 700-230 - - 1984 -

          Technical details
          clamping force 700 kN︱injection volume 103 cm³︱screw diameter 30 mm︱platen size 432 x 310 mm︱closing stroke 650 mm︱
            clamping force 700 kN
            injection volume 103 cm³
            screw diameter 30 mm
            platen size 432 x 310 mm
            closing stroke 650 mm
          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machines (plastic) ENGEL insert 500H/200 ROTARY


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-L210203 · Injection-moulding machines (plastic)

          ENGEL - insert 500H/200 ROTARY - - 12/2016 -

          Technical details
          clamping force 2000 kN︱injection volume 251 cm³︱screw diameter 40 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 880 mm︱
          Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Weight total: 14.500 kg - Operating hours approx.: 643 hours
            clamping force 2000 kN
            injection volume 251 cm³
            screw diameter 40 mm
            platen size 1.050 x 900 mm
            daylight between platens - max. 880 mm
            Description :
            Condition: used, very good condition

            Specification: Vertical injection moulding machine,
            with rotary table

            injection unit:
            - screw diameter: 40 mm
            - injection volume: 251 cm³
            - Injection flow: 244 cm³/sec
            - Spec. injection pressure: 1,300 bar
            - Spec. injection pressure increased: 2,020 bar
            - Nozzle stroke: 500 mm
            - Nozzle pressure: 51.9 kN

            Clamping unit:
            - Clamping force max.: 2,000 kN
            - Clamping platens hor. x vert. 820 x 459 mm
            - Max. platen distance: 880 mm
            - Opening stroke: 400 mm
            - Mould installation height: 480 mm
            - Ejector stroke: 105 mm
            Number of heating zones incl. nozzle: 4
            - Heating power: 9.3 kW
            - Weight clamping unit: 11,000 kg
            - Weight injection unit: 3.500 kg
            - Weight total: 14.500 kg
            - Operating hours approx.: 643 hours

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •