Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Injection-moulding machine (rubber)

          Machinelist: Injection-moulding machine (rubber)


          Injection-moulding machine (rubber)

          used Injection Moulding Injection-moulding machine (rubber) ENGEL ES 200V/45 VT-Elast


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210304 · Injection-moulding machine (rubber)

          ENGEL - ES 200V/45 VT-Elast - - 2010 -

          Technical details
          clamping force 450 kN︱injection volume 99 cm³︱screw diameter 30 mm︱platen size 860 x 320 mm︱closing stroke 406 mm︱
          Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive power: 11 kW - Weight without oil: 6,500 kg - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm
            clamping force 450 kN
            injection volume 99 cm³
            screw diameter 30 mm
            platen size 860 x 320 mm
            closing stroke 406 mm
            Description :
            Condition: used,

            Specification: C-Frame Injection Moulding Machine - second-hand
            Serial No.: 45083

            Clamping unit:
            - Clamping force: 450 kN
            - Opening travel: 406 mm
            - Heating plate size: 860 x 320 mm
            - Mould height min.: 264 mm
            - Max. plate spacing: 464 mm
            - Ejector stroke: 20 mm
            - Ejector force: 20 kN


            Injection unit:
            - Screw diameter: 30 mm
            - Screw length L/D: 16
            - Dosing stroke: 140 mm
            - Stroke volume max.: 99 cm³
            - Max. spray weight: 114 g
            - Screw speed: 20 - 300 rpm
            - Injection flow: 106 cm³/s
            - Injection flow increased: 71 cm³/s
            - Special injection pressure: 1451 bar
            - Spec. injection pressure increased: 2205 bar
            - Nozzle path: 530 mm
            - Operating hours: 54716 h
            - Pump drive power: 11 kW
            - Weight without oil: 6,500 kg
            - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) DESMA 956.050 ZO


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210815 · Injection-moulding machine (rubber)

          DESMA - 956.050 ZO - - 2004 -

          Technical details
          clamping force 500 kN︱injection volume -- cm³︱screw diameter -- mm︱platen size 500 x 400 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 500 kN - heating platen size: 500 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 3 Injection unit: - Injection volume max.: -- cm³ - Connected load: 3x 400 V, 50 Hz
            clamping force 500 kN
            injection volume -- cm³
            screw diameter -- mm
            platen size 500 x 400 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 500 kN
            - heating platen size: 500 x 400 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 3

            Injection unit:
            - Injection volume max.: -- cm³

            - Connected load: 3x 400 V, 50 Hz

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 1000/1000 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210806 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 1000/1000 B - - 2004 -

          Technical details
          clamping force 1.000 kN︱injection volume 1.000 cm³︱screw diameter -- mm︱platen size 500 x 500 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 1.000 kN - heating platen size: 500 x 500 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 1,000 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 50 kW - Weight approx.: 7,400 kg Three identical units are available
            clamping force 1.000 kN
            injection volume 1.000 cm³
            screw diameter -- mm
            platen size 500 x 500 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 1.000 kN
            - heating platen size: 500 x 500 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 1,000 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 50 kW
            - Weight approx.: 7,400 kg

            Three identical units are available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) ENGEL ES 200/45 VTHL Rubber


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210803 · Injection-moulding machine (rubber)

          ENGEL - ES 200/45 VTHL Rubber - - 2004 -

          Technical details
          clamping force 450 kN︱injection volume 135 cm³︱screw diameter 35 mm︱platen size 600 x 400 mm︱
          Condition: used, Specification: C-frame injection moulding machine for TPE - used, from testing department Including PIOVAN dosing unit clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg
            clamping force 450 kN
            injection volume 135 cm³
            screw diameter 35 mm
            platen size 600 x 400 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for TPE
            - used, from testing department

            Including PIOVAN dosing unit

            clamping unit:
            - clamping force: 450 kN
            - heating platen size: 600 x 400 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 135 cm³
            - Screw diameter: 35 mm

            - Connected load: 3x 400 V, 50 Hz
            - Weight approx.: 5,500 kg

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 1000/1000 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210804 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 1000/1000 B - - 2003 -

          Technical details
          clamping force 1.000 kN︱injection volume 1.000 cm³︱screw diameter -- mm︱platen size 500 x 500 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 1.000 kN - heating platen size: 500 x 500 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 1,000 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 50 kW - Weight approx.: 7,400 kg Three identical units are available
            clamping force 1.000 kN
            injection volume 1.000 cm³
            screw diameter -- mm
            platen size 500 x 500 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 1.000 kN
            - heating platen size: 500 x 500 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 1,000 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 50 kW
            - Weight approx.: 7,400 kg

            Three identical units are available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 1000/1000 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210805 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 1000/1000 B - - 2003 -

          Technical details
          clamping force 1.000 kN︱injection volume 1.000 cm³︱screw diameter -- mm︱platen size 500 x 500 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 1.000 kN - heating platen size: 500 x 500 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 1,000 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 50 kW - Weight approx.: 7,400 kg Three identical units are available
            clamping force 1.000 kN
            injection volume 1.000 cm³
            screw diameter -- mm
            platen size 500 x 500 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 1.000 kN
            - heating platen size: 500 x 500 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 1,000 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 50 kW
            - Weight approx.: 7,400 kg

            Three identical units are available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 2500/1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210802 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 2500/1000 - - 2003 -

          Technical details
          clamping force 2.500 kN︱injection volume 1.000 cm³︱screw diameter -- mm︱platen size 750 x 500 mm︱
          Condition: used, Specification: injection moulding machine for EPDM - used Clamping unit: - Clamping force: 2,500 kN - Heating platen size: 750 x 500 mm - Sliding table: Yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 1,000 cm³ - Connection value: 3x 400 V, 50 Hz - Power: 55 kW - Weight approx.: 12.600 kg There are two identical systems available
            clamping force 2.500 kN
            injection volume 1.000 cm³
            screw diameter -- mm
            platen size 750 x 500 mm
            Description :
            Condition: used,

            Specification: injection moulding machine for EPDM
            - used

            Clamping unit:
            - Clamping force: 2,500 kN
            - Heating platen size: 750 x 500 mm
            - Sliding table: Yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 1,000 cm³

            - Connection value: 3x 400 V, 50 Hz
            - Power: 55 kW
            - Weight approx.: 12.600 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 2500/1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210801 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 2500/1000 - - 2003 -

          Technical details
          clamping force 2.500 kN︱injection volume 1.000 cm³︱screw diameter -- mm︱platen size 750 x 500 mm︱
          Condition: used, Specification: injection moulding machine for EPDM - used Clamping unit: - Clamping force: 2,500 kN - Heating platen size: 750 x 500 mm - Sliding table: Yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 1,000 cm³ - Connection value: 3x 400 V, 50 Hz - Power: 55 kW - Weight approx.: 12.600 kg There are two identical systems available
            clamping force 2.500 kN
            injection volume 1.000 cm³
            screw diameter -- mm
            platen size 750 x 500 mm
            Description :
            Condition: used,

            Specification: injection moulding machine for EPDM
            - used

            Clamping unit:
            - Clamping force: 2,500 kN
            - Heating platen size: 750 x 500 mm
            - Sliding table: Yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 1,000 cm³

            - Connection value: 3x 400 V, 50 Hz
            - Power: 55 kW
            - Weight approx.: 12.600 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210811 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B - - 2002 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: no - Clamping direction: from below Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: no
            - Clamping direction: from below

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210812 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B - - 2002 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: no - Clamping direction: from below Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: no
            - Clamping direction: from below

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 300/250 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210813 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 300/250 B - - 2002 -

          Technical details
          clamping force 300 kN︱injection volume 250 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 300 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 250 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 27 kW - Weight approx.: 2.600 kg There are two identical systems available
            clamping force 300 kN
            injection volume 250 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 300 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 250 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 27 kW
            - Weight approx.: 2.600 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210808 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B - - 2002 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 5 Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 5

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 300/250 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210814 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 300/250 B - - 2002 -

          Technical details
          clamping force 300 kN︱injection volume 250 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 300 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 4 Injection unit: - Injection volume max.: 250 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 27 kW - Weight approx.: 2.600 kg There are two identical systems available
            clamping force 300 kN
            injection volume 250 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 300 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 4

            Injection unit:
            - Injection volume max.: 250 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 27 kW
            - Weight approx.: 2.600 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210807 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B - - 2001 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 5 Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 5

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) ENGEL ES 330/80 VHL-Pro-Elast


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B151107 · Injection-moulding machine (rubber)

          ENGEL - ES 330/80 VHL-Pro-Elast - - 2001 -

          Technical details
          clamping force 800 kN︱injection volume 154 cm³︱screw diameter 35 mm︱screw length 20D ︱platen size 660 x 560 mm︱closing stroke 510 mm︱
            clamping force 800 kN
            injection volume 154 cm³
            screw diameter 35 mm
            screw length 20D
            platen size 660 x 560 mm
            closing stroke 510 mm
          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B Compact


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210810 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B Compact - - 2001 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) ENGEL ES 200V/45 VT-Elast


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210303 · Injection-moulding machine (rubber)

          ENGEL - ES 200V/45 VT-Elast - - 2001 -

          Technical details
          clamping force 450 kN︱injection volume 99 cm³︱screw diameter 30 mm︱platen size 860 x 320 mm︱closing stroke 406 mm︱
          Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive power: 15 kW - Weight without oil: 5,500 kg - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm
            clamping force 450 kN
            injection volume 99 cm³
            screw diameter 30 mm
            platen size 860 x 320 mm
            closing stroke 406 mm
            Description :
            Condition: used,

            Specification: C-Frame Injection Moulding Machine - second-hand
            Serial No.: 45083

            Clamping unit:
            - Clamping force: 450 kN
            - Opening travel: 406 mm
            - Heating plate size: 860 x 320 mm
            - Mould height min.: 264 mm
            - Max. plate spacing: 464 mm
            - Ejector stroke: 20 mm
            - Ejector force: 20 kN


            Injection unit:
            - Screw diameter: 30 mm
            - Screw length L/D: 17
            - Dosing stroke: 140 mm
            - Stroke volume max.: 99 cm³
            - Max. spray weight: 114 g
            - Screw speed: 20 - 300 rpm
            - Injection flow: 106 cm³/s
            - Injection flow increased: 71 cm³/s
            - Special injection pressure: 1450 bar
            - Spec. injection pressure increased: 2210 bar
            - Nozzle path: 200 mm
            - Operating hours: 54716 h
            - Pump drive power: 15 kW
            - Weight without oil: 5,500 kg
            - Dimensions L/W/height: 2,500 x 1,900 x 3,680 mm

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) LWB Steinl VCE 270/160 B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210809 · Injection-moulding machine (rubber)

          LWB Steinl - VCE 270/160 B - - 2001 -

          Technical details
          clamping force 270 kN︱injection volume 160 cm³︱screw diameter -- mm︱platen size 300 x 300 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 270 kN - heating platen size: 300 x 300 mm - sliding table: yes - Clamping direction: from below Injection unit: - Injection volume max.: 160 cm³ - Connected load: 3x 400 V, 50 Hz - Power: 20 kW - Weight approx.: 2.100 kg There are two identical systems available
            clamping force 270 kN
            injection volume 160 cm³
            screw diameter -- mm
            platen size 300 x 300 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 270 kN
            - heating platen size: 300 x 300 mm
            - sliding table: yes
            - Clamping direction: from below

            Injection unit:
            - Injection volume max.: 160 cm³

            - Connected load: 3x 400 V, 50 Hz
            - Power: 20 kW
            - Weight approx.: 2.100 kg

            There are two identical systems available

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) DESMA 956.050 ZO


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210816 · Injection-moulding machine (rubber)

          DESMA - 956.050 ZO - - 2000 -

          Technical details
          clamping force 500 kN︱injection volume 220 cm³︱screw diameter -- mm︱platen size 500 x 320 mm︱
          Condition: used, Specification: C-frame injection moulding machine for EPDM - used clamping unit: - clamping force: 500 kN - heating platen size: 500 x 320 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo - Number of core pulls: 1 Injection unit: - Injection volume max.: 220 cm³ - Connected load: 3x 400 V, 50 Hz
            clamping force 500 kN
            injection volume 220 cm³
            screw diameter -- mm
            platen size 500 x 320 mm
            Description :
            Condition: used,

            Specification: C-frame injection moulding machine for EPDM
            - used

            clamping unit:
            - clamping force: 500 kN
            - heating platen size: 500 x 320 mm
            - sliding table: yes
            - Clamping direction: from below
            - Ejector / lifter: Up + Lo
            - Number of core pulls: 1

            Injection unit:
            - Injection volume max.: 220 cm³

            - Connected load: 3x 400 V, 50 Hz

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) DESMA 968.400ZO


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210503 · Injection-moulding machine (rubber)

          DESMA - 968.400ZO - - 1997 -

          Technical details
          clamping force 4.000 kN︱injection volume 5.000 cm³︱screw diameter -- mm︱platen size 780 x 670 mm︱closing stroke -- mm︱
          Condition: used, Specification: vertical injection moulding machine for rubber - used injection unit: - injection volume max.: 5.000 cm³ - injection pressure: 2,060 bar Clamping unit: - Machine tonnage: 400 t - clamping force: 4,000 kN - Clamping plates approx.: 780 x 670 mm - Control: Siemens S5 drive: - Pump drive power: 30 kW - connected load: 3x 400 V, 60 Hz, N - Operating hours approx.: 92041 h - Weight approx.: 13.900 kg Hydraulic core lifters: injection and closing side with documentation, without extraction and Impact strip.
            clamping force 4.000 kN
            injection volume 5.000 cm³
            screw diameter -- mm
            platen size 780 x 670 mm
            closing stroke -- mm
            Description :
            Condition: used,

            Specification: vertical injection moulding machine
            for rubber - used

            injection unit:
            - injection volume max.: 5.000 cm³
            - injection pressure: 2,060 bar

            Clamping unit:
            - Machine tonnage: 400 t
            - clamping force: 4,000 kN
            - Clamping plates approx.: 780 x 670 mm
            - Control: Siemens S5

            drive:
            - Pump drive power: 30 kW
            - connected load: 3x 400 V, 60 Hz, N

            - Operating hours approx.: 92041 h
            - Weight approx.: 13.900 kg

            Hydraulic core lifters: injection and closing side

            with documentation, without extraction and Impact strip.
          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) DESMA 968.400ZO


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210504 · Injection-moulding machine (rubber)

          DESMA - 968.400ZO - - 1995 -

          Technical details
          clamping force 4.000 kN︱injection volume 5.000 cm³︱screw diameter -- mm︱platen size 780 x 670 mm︱closing stroke -- mm︱
          Condition: used, Specification: vertical injection moulding machine for rubber - used injection unit: - injection volume max.: 5.000 cm³ - injection pressure: 2,060 bar Clamping unit: - Machine tonnage: 400 t - clamping force: 4,000 kN - Clamping plates approx.: 780 x 670 mm - Control: Siemens S5 drive: - Engine power: 35.5 kW - Pump drive power: 30 kW - Heat output: 63.2 kW - connected load: 3x 400 V, 50 Hz, N - Current consumption: 195 A - Weight approx.: 14.500 kg with documentation, without extraction and Impact strip.
            clamping force 4.000 kN
            injection volume 5.000 cm³
            screw diameter -- mm
            platen size 780 x 670 mm
            closing stroke -- mm
            Description :
            Condition: used,

            Specification: vertical injection moulding machine
            for rubber - used

            injection unit:
            - injection volume max.: 5.000 cm³
            - injection pressure: 2,060 bar

            Clamping unit:
            - Machine tonnage: 400 t
            - clamping force: 4,000 kN
            - Clamping plates approx.: 780 x 670 mm
            - Control: Siemens S5

            drive:
            - Engine power: 35.5 kW
            - Pump drive power: 30 kW
            - Heat output: 63.2 kW
            - connected load: 3x 400 V, 50 Hz, N
            - Current consumption: 195 A

            - Weight approx.: 14.500 kg

            with documentation, without extraction and Impact strip.

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) KLOECKNER-FERROMATIC FM 140 2K/250 V


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B150702 · Injection-moulding machine (rubber)

          KLOECKNER-FERROMATIC - FM 140 2K/250 V - - 1993 -

          Technical details
          clamping force 2500 kN︱injection volume 2x 190 cm³︱screw diameter 45 mm︱screw length 22 D ︱platen size 510 x 670 mm︱
          Condition: used Specification: Vertical Injection Moulding Machine for Rubber - second-hand - clamping force: 2500 kN - screw diameter: 45 mm - screw length: 22 D - screw speed: max. 300 rpm - injection volume: 2 x 190 cm3 - Injection pressure: 1900 bar - Number of heating zones: 5 - open nozzle with nozzle head - Clear column spacing: 510 x 670 - Mains supply voltage: 380 V, 50 Hz - Machine weight approx.: 7.8 t without oil filling - Oil filling approx.: 260 litres, 230 kg Two identical machines (built 1991, 1993) are available.
            clamping force 2500 kN
            injection volume 2x 190 cm³
            screw diameter 45 mm
            screw length 22 D
            platen size 510 x 670 mm
            Description :
            Condition: used

            Specification: Vertical Injection Moulding Machine for Rubber - second-hand

            - clamping force: 2500 kN
            - screw diameter: 45 mm
            - screw length: 22 D
            - screw speed: max. 300 rpm
            - injection volume: 2 x 190 cm3
            - Injection pressure: 1900 bar
            - Number of heating zones: 5
            - open nozzle with nozzle head
            - Clear column spacing: 510 x 670
            - Mains supply voltage: 380 V, 50 Hz
            - Machine weight approx.: 7.8 t without oil filling
            - Oil filling approx.: 260 litres, 230 kg

            Two identical machines (built 1991, 1993) are available.

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) WERNER & PFLEIDERER GSP 250.25 VU-M2B


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B210206 · Injection-moulding machine (rubber)

          WERNER & PFLEIDERER - GSP 250.25 VU-M2B - - 1992 -

          Technical details
          clamping force 2.500 kN︱injection volume -- cm³︱screw diameter -- mm︱platen size ca. 600 x 550 mm︱closing stroke 658 mm︱
          Condition: used, Specification: vertical injection moulding machine for rubber - used injection unit: - injection volume max.: XXX cm³ - injection force: 780 kN - injection stroke: 658 mm clamping unit: - Machine tonnage: 250 t - Clamping force: 2,500 kN - Retraction force: 75 kN - Clamping stroke: 660 mm - Clamping area approx.: 600 x 550 mm Ejector: - Ejection force nozzle: 40 kN - Ejection stroke nozzle: 300 mm - Ejector force closing side: 140 kN - Ejection stroke closing side: 300 mm without documentation
            clamping force 2.500 kN
            injection volume -- cm³
            screw diameter -- mm
            platen size ca. 600 x 550 mm
            closing stroke 658 mm
            Description :
            Condition: used,

            Specification: vertical injection moulding machine for rubber
            - used

            injection unit:
            - injection volume max.: XXX cm³
            - injection force: 780 kN
            - injection stroke: 658 mm

            clamping unit:
            - Machine tonnage: 250 t
            - Clamping force: 2,500 kN
            - Retraction force: 75 kN
            - Clamping stroke: 660 mm
            - Clamping area approx.: 600 x 550 mm

            Ejector:
            - Ejection force nozzle: 40 kN
            - Ejection stroke nozzle: 300 mm
            - Ejector force closing side: 140 kN
            - Ejection stroke closing side: 300 mm

            without documentation

          Datasheet
          Request / Contact
          used Injection Moulding Injection-moulding machine (rubber) KLOECKNER-FERROMATIC FM 140 2K/250 V


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-B150703 · Injection-moulding machine (rubber)

          KLOECKNER-FERROMATIC - FM 140 2K/250 V - - 1991 -

          Technical details
          clamping force 2500 kN︱injection volume 2x 190 cm³︱screw diameter 45 mm︱screw length 22 D ︱platen size 510 x 670 mm︱
          Condition: used Specification: Vertical Injection Moulding Machine for Rubber - second-hand - clamping force: 2500 kN - screw diameter: 45 mm - screw length: 22 D - screw speed: max. 300 rpm - injection volume: 2 x 190 cm3 - Injection pressure: 1900 bar - Number of heating zones: 5 - open nozzle with nozzle head - Clear column spacing: 510 x 670 - Mains supply voltage: 380 V, 50 Hz - Machine weight approx.: 7.8 t without oil filling - Oil filling approx.: 260 litres, 230 kg Two identical machines are available.
            clamping force 2500 kN
            injection volume 2x 190 cm³
            screw diameter 45 mm
            screw length 22 D
            platen size 510 x 670 mm
            Description :
            Condition: used

            Specification: Vertical Injection Moulding Machine for Rubber
            - second-hand

            - clamping force: 2500 kN
            - screw diameter: 45 mm
            - screw length: 22 D
            - screw speed: max. 300 rpm
            - injection volume: 2 x 190 cm3
            - Injection pressure: 1900 bar
            - Number of heating zones: 5
            - open nozzle with nozzle head
            - Clear column spacing: 510 x 670
            - Mains supply voltage: 380 V, 50 Hz
            - Machine weight approx.: 7.8 t without oil filling
            - Oil filling approx.: 260 litres, 230 kg

            Two identical machines are available.

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •