Rubber Extruder

screw ø: 60 mm︱screw length: 11D ︱screw speedl: -- U/min︱drive power: 18,5 kW︱

---

Condition: used, overhauled Specification: rubber extruder - used - screw diameter: 60 mm - screw length: 11D - screw length: approx. 660 mm - overhaul of screw and barrel - Overhaul of feed roller and safety cage - New rotary union for water - AC motor: 18.5 kW - New control cabinet with frequency converter for variable speed - New cabling - Pressure and temperature sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Overhauled according to CE-Standard safety regulations Warranty: 1 year Option: 3x temperature control units up to 95°C water temperature Power: 6 kW

screw ø: für Extruder 120 mm︱screw length: -- ︱screw speedl: -- U/min︱drive power: 19,8 kW︱

---

screw ø: 120 mm︱screw length: 17D ︱screw speedl: 42 U/min︱drive power: 138 kW︱

---

screw ø: für Extruder 90 mm︱screw length: -- ︱screw speedl: -- U/min︱drive power: 13,6 kW︱

---

Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control

screw ø: 150 mm︱screw length: 20D ︱screw speedl: -- U/min︱

---

Condition: used, will be overhauled on order incl. warranty, incl. CE-marking Specification: vacuum extruder - second-hand with feed roller - screw diameter: 150 mm - screw length: L = 20D - motor power: 150 kW - Voltage: 3x 400V, 50Hz, N

screw ø: 120 mm︱screw length: 12D ︱screw speedl: 1,75 - 35 U/min︱drive power: 72,5 kW︱

---

Condition: used, will be overhauled on order incl. warranty, incl. CE-marking Specification: Extruder - second-hand with feed roller - screw diameter: 120 mm - screw length: L = 12D - screw speed: 1,75 - 35 rpm - nominal motor power: 72,5 kW - Nominal gearbox torque: 18,000 Nm - Belt drive, number of belts: 5 - Number of heating-cooling zones: 4 - Heating capacity per zone: 6 kW - Voltage: 3x 400V, 50Hz, N

screw ø: 150 mm︱screw length: 16D ︱screw speedl: 2,5 - 40 U/min︱drive power: kW︱

---

screw ø: 90 mm︱screw length: 20D ︱screw speedl: 0 - 60 U/min︱

---

Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capacity per zone: 9 kW - Feed roller temperable version - AC drive motor approx.: 54kW, n/max = 1,150 rpm Unit with 12 months warranty and CE marking