Pilger mill
Machinelist: Pilger mill
Pilger mill
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403156 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there is NO vertical counter weight which is going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Spares: 1 pair of pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403665 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there are NO vertical counter weights which are going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare part including pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403678 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1974 / modern. 1995 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good 1995 modernization of the existing line. Working range: ============== Entry pressed tubes: Diameter: min./max. 40/85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop lenth: 13,5 m Advancing range: min./max. 3,5 - 18 mm/stroke Rpm range: 60 - 120 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ===================== - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 New hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare parts including pilger rolls The system can still be viewed at the seller. Photos available upon request.