,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Cut-to-length-lines

          Machinelist: Cut-to-length-lines


          Cut-to-length-lines

          used Sheet metal working / shaeres / bending Cut-to-length-lines VIGANO/RIVA


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056810 · Cut-to-length-lines

          VIGANO/RIVA - - - 2000/2001 -

          Technical details
          Material Width 2.000 mm︱Material Thickness 1,50 - (5,00)6,00 mm︱Coil Weight max. 30,0 t︱Coil Inside Diameter 580 mm︱Coil Outside Diameter 1.250/1.500 mm︱
          sheet length 580 - 6.000 mm working direction left - right otherwise according to technical specification 05.68-1.0
            Material Width 2.000 mm
            Material Thickness 1,50 - (5,00)6,00 mm
            Coil Weight max. 30,0 t
            Coil Inside Diameter 580 mm
            Coil Outside Diameter 1.250/1.500 mm
            Description :
            sheet length 580 - 6.000 mm
            working direction left - right

            otherwise according to technical specification 05.68-1.0


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines HITACHI


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19439 · Cut-to-length-lines

          HITACHI - - - 1993 -

          Technical details
          sheet width 500 - 1350 mm︱plate thickness 0,3 - 3 mm︱no. of strokes Hub/min︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stainless steel Cut to Length Line(Flying type) - Material: stainless steel, surface treated steel -- Thickness: 0.3–3 mm (as of stainless steel) -- Width: 500-1350 mm -- Trim: 5-25 mm on one side (more than twice the plate thickness) - Material coil: internal diameter 508 mm, external diameter 600–1800 mm -- weight maximum 15 tons -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming) -- Product length: 400–6000 mm Plus/minus 0.3 mm - 6-leveler (6-hi) leveler x 2units types -- Tension: 45 to 50 kg/mm2 -- Yield point: 28 kg/mm2 - Cutting method: Cut while running (flying), numerically controlled rocking type - flying shears -- (Cutting speed) 20–40/80 m/min -- Speed 2-speed change type --- 0.3 to 1.2 mm: 20 to 80 m/min --- 0.21–3 mm: 20–40 m/min -- Slow operation: 0.8 m/min -- Conveyor speed: 20~120m/min -- Cut count: up to 150 cuts/min -- (Product piling) --- Plate width: 500–1350 mm --- No1 piler: 400 to 3100 mm (also used as a reject filer) --- No2 piler: 400–6100 mm --- Load height: up to 600mm --- Load weight: up to 4 tons Line direction: From right to left on control panel Line: Approximately 13 m x 49.050 m (Major facilities) - Coil skid - Coil car - Pay off reel and a paper winder - Coil opener - Rough Leveler - Shear - No. 1 Looper Guide - Side guide and pinch roller - Side trimmer - Scrap winder x2 - No.1 Finisher Leveler (6-hi) - No2 Finisher Leveler (6-hi) - No 2 Looper Guide - Measuring roller, feed roller and paper-off reel - Shear - Conveyor - Cart - No1/No2 piler type - Hydraulic unit: Type - Valve stand type - (Coil skid) -- V-type fixed skid -- Coil maintenance: 1 coil -- Coil weight: up to 15 tonnes -- Coil diameter: 600 to 1800 mm -urethane rubber (Coil Car) Cradle roller type Hydraulic boost Electricity transfer driving type Two guide lots hydraulic cylinder elevating type (payoff reel and paper winder) Overhang, single-mant 4-segment type Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake Paper winder: cone type, (motor DC 1.5KW, 1750 RPM) (Coil Opener) Knife edge method (Rough Leveler) 2-stage (2hi) 5-body roller leveler Pinch rollers: 160 mm × 1450 mm 2 pieces, The upper part of the pinch roller is hydraulic cylinder press-down, and the lower roller is fixed 5 workload rollers 130mm x 1450mm The upper roller of the workload roller is electrically pressed, and the lower roller is fixed 0–40/80 m/min Two-stage change 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Motor: DC 18.5 KW, 1750 RPM, Brake Attachment Pressing motor: 2 1.5KW 100RPMs with brakes (Shear) Hydraulic up cut shear Knife size: 25 mm thickness × 150 mm width × 1450 mm length (No. 1 Looper Guide) Table lift Hydraulic cylinder operation method Loop: Light Volume Control Method Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Side guide and pinch roller) Vertical Free Roller Electrically switched type Side guide roller: 90 mm diameter × 150 mm length × 6 bones Pinch Roller: 2nd Stage (2hi) Roller: 160 mm diameter × 1450 mm length × 2 bones Upper roller: pneumatic cylinder pressure free roller Lower Roller: Fixed Drive Roller (Side trimmer) Overhang Drive Cut 0–40/80 m/min 2-stage change type 0.3 to 1.6 mmt: 80 m/min 1.7 to 1.6 mmt: 40 m/min Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness Motor: DC 5.5KW 1750RPM (Scrap winder) Two machines Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type) Motor: 2 DC 2.2KW 1450 RPM (No1 Finisher Leveler) 6-level (6-hi) 17 leveler Thickness: 1.21–3.0 mm Speed: 6 to 40/80 m/min Thickness 0.3–1.2 mm 6–80 m/min Thickness 1.21–3 mm 6–40 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 60mm x 1750mm x 17e 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium roller: 50 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 55KW 1750 RPM Brake Attachment (No2 Finisher Leveler) 6-level (6-hi) 17 leveler Plate thickness: 0.3–1.2 mm Speed: 5 to 80 m/min Pinch roller: 180 mm × 1750 mm × 2 bones The upper roll is a pneumatic cylinder. The lower roll is fixed Rubber lining drive roller Work roll: 35mm x 1750mm x 17bon 8 for the upper roll, 9 for the lower roll Plated abrasive roller Medium Roller: 32 mm × 1750 mm × 19 pieces 9 for the upper roll, 10 for the bottom roll Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows Roller bearing type Pressing Method: Lower Roller Parallel Pressing Pressing speed: 0.25 mm/sec Pressurization: plus or minus 5 mm Motor: DC 35KW 1750RPM Brake Attachment (No. 2 Looper Guide) Table lift Hydraulic cylinder operation method Loop: How to control the amount of light (amount of light) Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller (Measuring roll/feed roller/paper vinyl payoff reel) Measuring roller: The upper roll is pneumatic pressing, the lower roll is fixed, the pressing amount is 30 mm Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press load is 40 mm Motor: DC 2.2KW 1750RPM (Shear) Fluctuating Flying shear 0.3~3mm Speed: 2 groups of 20–40/80 m/min Thickness 0.3–1.6 mm 80 m/min Tlate thickness 1.6–3 mm 40 m/min Cut count: up to 150 cuts/min Cutting length: 400–6000 mm Electric up CUT shear Cut up and down knife die via motor, reducer, pinion stand crankshaft Knife: 20 mmt × 80 mm × 1400 mm × 1 set The top knife is a straight knife, and the bottom is a V-lock knife Adjustment: Wedge Motor: DC 75KW 550RPM (Conveyor) Belt conveyor type Belt width: 1200 mm Conveyor length: 3800 mm Motor DC 5.5KW 1450RPM Brake Attachment (No. 1 No. 2 piler) No1 piler: Combined use of reject truck, air blower Combined use of side conveyor No2 piler: Combined suction conveyor and air blower Loading height: 600 mm Lift: Hydraulic lift volume 650 mm Motor: 4 1.5KW 150RPM units for side guide end stoppers 2.2 KW 1500RPM for lifters 1.5KW for cart 7.5KW for blower (Hydraulic device) 70 kg/cm2 × 100 L/min Pen pump Motor: DC 18.5 KW 1000 RPM (Supply power) AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase (Control power) AC 200V, 50 Hz Single Phase (Compressed air) Compressed air required: 5 kg/cm2
            sheet width 500 - 1350 mm
            plate thickness 0,3 - 3 mm
            Description :
            Stainless steel Cut to Length Line(Flying type)

            - Material: stainless steel, surface treated steel
            -- Thickness: 0.3–3 mm (as of stainless steel)
            -- Width: 500-1350 mm
            -- Trim: 5-25 mm on one side (more than twice the plate thickness)
            - Material coil: internal diameter 508 mm, external diameter 600–1800 mm
            -- weight maximum 15 tons
            -- Width accuracy: 500–1350 mm plus or minus 0.2 mm (when side trimming)
            -- Product length: 400–6000 mm Plus/minus 0.3 mm

            - 6-leveler (6-hi) leveler x 2units types
            -- Tension: 45 to 50 kg/mm2
            -- Yield point: 28 kg/mm2
            - Cutting method: Cut while running (flying), numerically controlled rocking
            type

            - flying shears
            -- (Cutting speed) 20–40/80 m/min
            -- Speed 2-speed change type
            --- 0.3 to 1.2 mm: 20 to 80 m/min
            --- 0.21–3 mm: 20–40 m/min
            -- Slow operation: 0.8 m/min
            -- Conveyor speed: 20~120m/min
            -- Cut count: up to 150 cuts/min
            -- (Product piling)
            --- Plate width: 500–1350 mm
            --- No1 piler: 400 to 3100 mm (also used as a reject filer)
            --- No2 piler: 400–6100 mm
            --- Load height: up to 600mm
            --- Load weight: up to 4 tons

            Line direction: From right to left on control panel
            Line: Approximately 13 m x 49.050 m
            (Major facilities)
            - Coil skid
            - Coil car
            - Pay off reel and a paper winder
            - Coil opener
            - Rough Leveler
            - Shear
            - No. 1 Looper Guide
            - Side guide and pinch roller
            - Side trimmer
            - Scrap winder x2
            - No.1 Finisher Leveler (6-hi)
            - No2 Finisher Leveler (6-hi)
            - No 2 Looper Guide
            - Measuring roller, feed roller and paper-off reel
            - Shear
            - Conveyor
            - Cart
            - No1/No2 piler type
            - Hydraulic unit: Type
            - Valve stand type
            - (Coil skid)
            -- V-type fixed skid
            -- Coil maintenance: 1 coil
            -- Coil weight: up to 15 tonnes
            -- Coil diameter: 600 to 1800 mm
            -urethane rubber
            (Coil Car)
            Cradle roller type
            Hydraulic boost
            Electricity transfer driving type
            Two guide lots hydraulic cylinder elevating type
            (payoff reel and paper winder)
            Overhang, single-mant 4-segment type
            Paper reel motor: DC 5.5KW 400/1600 RPM, attached to brake
            Paper winder: cone type, (motor DC 1.5KW, 1750 RPM)
            (Coil Opener)
            Knife edge method
            (Rough Leveler)
            2-stage (2hi) 5-body roller leveler
            Pinch rollers: 160 mm × 1450 mm 2 pieces,
            The upper part of the pinch roller is hydraulic cylinder press-down, and the
            lower roller is fixed
            5 workload rollers 130mm x 1450mm
            The upper roller of the workload roller is electrically pressed, and the lower
            roller is fixed
            0–40/80 m/min
            Two-stage change
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Motor: DC 18.5 KW, 1750 RPM, Brake Attachment
            Pressing motor: 2 1.5KW 100RPMs with brakes
            (Shear)
            Hydraulic up cut shear
            Knife size: 25 mm thickness × 150 mm width × 1450 mm length
            (No. 1 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: Light Volume Control Method
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Side guide and pinch roller)
            Vertical Free Roller
            Electrically switched type
            Side guide roller: 90 mm diameter × 150 mm length × 6 bones
            Pinch Roller: 2nd Stage (2hi)
            Roller: 160 mm diameter × 1450 mm length × 2 bones
            Upper roller: pneumatic cylinder pressure free roller
            Lower Roller: Fixed Drive Roller
            (Side trimmer)
            Overhang Drive Cut
            0–40/80 m/min 2-stage change type
            0.3 to 1.6 mmt: 80 m/min
            1.7 to 1.6 mmt: 40 m/min
            Cutter diameter: 320 mm / 190 mm internal diameter × 20 mm thickness
            Roller: 320 mm external diameter × 19 mm internal diameter × 20 mm thickness
            Motor: DC 5.5KW 1750RPM
            (Scrap winder)
            Two machines
            Link Pin Gauge Type (Hydraulic Cylinder Opening and Closing Type)
            Motor: 2 DC 2.2KW 1450 RPM
            (No1 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Thickness: 1.21–3.0 mm
            Speed: 6 to 40/80 m/min
            Thickness 0.3–1.2 mm 6–80 m/min
            Thickness 1.21–3 mm 6–40 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 60mm x 1750mm x 17e
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium roller: 50 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 88 mm Diameter x 50 mm Length x 7 rows
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 55KW 1750 RPM Brake Attachment
            (No2 Finisher Leveler)
            6-level (6-hi) 17 leveler
            Plate thickness: 0.3–1.2 mm
            Speed: 5 to 80 m/min
            Pinch roller: 180 mm × 1750 mm × 2 bones
            The upper roll is a pneumatic cylinder. The lower roll is fixed
            Rubber lining drive roller
            Work roll: 35mm x 1750mm x 17bon
            8 for the upper roll, 9 for the lower roll
            Plated abrasive roller
            Medium Roller: 32 mm × 1750 mm × 19 pieces
            9 for the upper roll, 10 for the bottom roll
            Backup Roller: 99 mm Diameter x 50 mm Length x 7 rows
            Roller bearing type
            Pressing Method: Lower Roller Parallel Pressing
            Pressing speed: 0.25 mm/sec
            Pressurization: plus or minus 5 mm
            Motor: DC 35KW 1750RPM Brake Attachment
            (No. 2 Looper Guide)
            Table lift
            Hydraulic cylinder operation method
            Loop: How to control the amount of light (amount of light)
            Roller: 70 mm diameter × 1450 mm × 6 bonds, rubber lining roller
            (Measuring roll/feed roller/paper vinyl payoff reel)
            Measuring roller: The upper roll is pneumatic pressing, the lower roll is
            fixed, the pressing amount is 30 mm
            Feed roller: Upper roll is pneumatic cylinder press, lower roll is fixed, press
            load is 40 mm
            Motor: DC 2.2KW 1750RPM
            (Shear)
            Fluctuating Flying shear
            0.3~3mm
            Speed: 2 groups of 20–40/80 m/min
            Thickness 0.3–1.6 mm 80 m/min
            Tlate thickness 1.6–3 mm 40 m/min
            Cut count: up to 150 cuts/min
            Cutting length: 400–6000 mm
            Electric up CUT shear
            Cut up and down knife die via motor, reducer, pinion stand crankshaft
            Knife: 20 mmt × 80 mm × 1400 mm × 1 set
            The top knife is a straight knife, and the bottom is a V-lock knife
            Adjustment: Wedge
            Motor: DC 75KW 550RPM
            (Conveyor)
            Belt conveyor type
            Belt width: 1200 mm
            Conveyor length: 3800 mm
            Motor DC 5.5KW 1450RPM Brake Attachment
            (No. 1 No. 2 piler)
            No1 piler: Combined use of reject truck, air blower
            Combined use of side conveyor
            No2 piler: Combined suction conveyor and air blower
            Loading height: 600 mm
            Lift: Hydraulic lift volume 650 mm
            Motor: 4 1.5KW 150RPM units for side guide end stoppers
            2.2 KW 1500RPM for lifters
            1.5KW for cart
            7.5KW for blower
            (Hydraulic device)
            70 kg/cm2 × 100 L/min
            Pen pump
            Motor: DC 18.5 KW 1000 RPM
            (Supply power)
            AC400 V,50 Hertz 3 Phase / AC200 V,50 Hertz 3 Phase
            (Control power)
            AC 200V, 50 Hz Single Phase
            (Compressed air)
            Compressed air required: 5 kg/cm2



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines WILHELMSBURGER


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-056410 · Cut-to-length-lines

          WILHELMSBURGER - - - 1975 -

          Technical details
          Material Width 1.800 mm︱Material Thickness 0,50-1,50 mm︱Coil Weight 30,0 t︱Required Space app. m︱Machine Weight app. t︱
          length tolerance ± 0,5 mm width tolerance ± 0,5 mm diagonal tolerance ± 1,0 mm line consisting of: double side decoiler leveler no. of leveling rolls 21 leveling roll diameter 35 mm flying shear magnetic conveyor table - length 10 m 2 output tables electric pneumatic hydraulic
            Material Width 1.800 mm
            Material Thickness 0,50-1,50 mm
            Coil Weight 30,0 t
            Description :
            length tolerance ± 0,5 mm
            width tolerance ± 0,5 mm
            diagonal tolerance ± 1,0 mm

            line consisting of:
            double side decoiler
            leveler
            no. of leveling rolls 21
            leveling roll diameter 35 mm
            flying shear
            magnetic conveyor table - length 10 m
            2 output tables
            electric
            pneumatic
            hydraulic


        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Cut-to-length-lines Hydro Meca 90L4C108H


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-M825 · Cut-to-length-lines

          Hydro Meca - 90L4C108H - - -

          Technical details
          Capacity 26/34/42/48/60 mm ø︱Machine dimensions (lxwxh) - mm︱Machine weight - kg︱
          Pipe cutting machine
            Capacity 26/34/42/48/60 mm ø
            Machine dimensions (lxwxh) - mm
            Machine weight - kg
            Description :
            Pipe cutting machine


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •