Band Saw - Automatic

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

cutting diameter 300 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 90 degrees: square 260 x 260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: flat 270 x 200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: flat 170 x 170 mm︱height of material-table 600 mm︱Pitch min/max 50.000 mm︱vice 335 mm Öffnung︱band speed 15 - 100 m/min︱automatic feeds 600 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱range L-W-H 3,3 x 2,83 x 2,23 m︱

---

Electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw machines - with the new, specially developed by MEP for automatic machines Windows “CE” based control - User interface with 7 ”touch screen display and mechanical buttons for the operational functions of the sawing machine, guarantees reliable peration, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker - The control console on a swivel arm allows a comfortable and safe operation from any position - Display and entry of alarm and error messages with the option of report the incidents that have occurred. - Stepless regulation of the cutting speed from 15 to 100 m / min Frequency converter (inverter). - The latest generation of hydraulic power packs, extremely powerful with little Power consumption. - Material feed with stepper motor via ball screw, which on opposite ball bearing is mounted; Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using the joystick. - Automatic detection of the cutting start position - Manually operated strap tension control with indication on the display by means of electronic converter - Automatic monitoring of the cutting load through a directly on the Cylinder mounted servo valve - The coolant pan (provided with 2 electric pumps for lubrication and Cooling of the saw band) is built into the underframe - The chip drawer can be replaced by a motorized chip conveyor - see special accessories - Preparation for the installation of the OPTIONAL minimum quantity lubrication system together with the conventional standard lubrication with emulsion oil. - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with a list of spare parts

serial number 0392212 ︱cutting diameter rund max. 430 mm︱control mit Massenspeicher ︱stroke max. 10 mm︱weight of the machine ca. 4 t︱

---

dimensions of saw-band 3650x27x0,9 mm︱speed 15/100 m/min︱capacity 90 degrees: round 280 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260 mm︱capacity 45 degrees: square 250 mm︱capacity 45 degrees: flat 270x200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱vice 340 mm︱weight 1240 kg︱dimensions 2020x2040x1740 mm︱

---

Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

dimensions of saw-band 4400x34x1,1 mm︱ 305 mm︱ 305x335 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱ 330 mm︱ 305x335 mm︱ 180 mm︱ 170x335 mm︱work height max. 750 mm︱rest piece length man./autom. 80/300 mm︱ 1000 / 9999 mm︱ 15-150 m/min︱Weight 2020 kg︱

---

Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive

dimensions of saw-band 3650x27x0,9 mm︱speed 15-100 m/min︱vice 335 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 270x200/200x160 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱total power requirement 2,2 kW︱weight 1.105 kg︱dimensions 2700x2300x1800 mm︱

---

Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

15-150 m/min︱dimensions of saw-band 4400x34x1,1 mm︱ 305 mm︱ 305x335 mm︱capacity 90 degrees: round 335 mm︱capacity 90 degrees: flat 500x335 mm︱ 330 mm︱ 320x335 mm︱ 180 mm︱ 170x335 mm︱ 300 mm︱ 80 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW AC︱Weight 2020 kg︱dimensions 5350x2300x2000 mm︱

---

Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive

capacity 90 degrees: round 250 mm︱capacity 90 degrees: flat 250x250 mm︱power capacity 3,0 kW︱cutting speed 15-105 m/min︱dimensions of saw-band 3660x34x1,1 mm︱weight of the machine ca. 1950 kg︱dimensions of the machine ca. 2100x1900x2100 mm︱

---

cutting diameter 350 mm︱saw band length 4160 x 34 x 1,1 mm︱cutting width 350 mm︱cutting capacity - flat 400 x350 / 90° mm︱cutting capacity - flat 400 x 350 / 30° mm︱cutting capacity - flat 290 x 300 / 45° mm︱cutting capacity - round 350 / 90° mm︱cutting capacity - round 320 / 30° mm︱cutting capacity - round 320 / 45° mm︱feeds - fine adjustment 20-100 mm︱hydraulic motor 0,37 kW︱coolant pump AC 0,12 kW︱drive motor 2,2 kW︱total power requirement 2,7 kW︱weight of the machine ca. 1,05 t︱dimensions of the machine ca. 2100 x 1300 x 850 m︱

---

Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards,

capacity Ø 10 - 75 mm︱sawing motor 11 kW︱hydraulic motor 3 kW︱Saw Feeding Servo 1,5 KW Siemens︱Material Feeding Motor 1,5 KW Siemens︱Saw speed 70-160 rpm /min︱saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm︱cutting range min. 1000 mm︱cutting range max. 7000 mm︱control Siemens ︱hydraulic Rexroth Valve ︱coolant Pulverisiertes Schneidöl ︱required space 2950x6800 m︱weight of the machine ca. 3500 kg︱

---

GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.

Capacity Ø 15 - 100 mm︱sawing motor 11 kW︱saw speed 30-130 U / min︱hydraulic motor 2,2 kW︱Saw Feeding Servo 1,5 KW Siemens︱Material Feeding Motor 1,5 KW Siemens︱saw-blade dia. Ø360 x T2.6 x 2.25 x 40 mm︱cutting range min. 3000 mm︱cutting range max. 7000 mm︱control Siemens ︱hydraulic Rexroth Valve ︱coolant Pulverisiertes Schneidöl ︱required space 2900 x 7400 m︱barrel diameter mm︱barrel diameter mm︱Saw speed rpm /min︱weight of the machine ca. 4900 kg︱

---

GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

capacity Ø 30 - 160 mm︱Saw Body 30 Grad Linear Schlitten ︱sawing motor 15 kW︱hydraulic motor 3 kW︱Saw Feeding Servo 1,5 KW Siemens︱Material Feeding Motor 1,5 KW Siemens︱Saw speed 30-120 rpm /min︱saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm︱cutting range min. 1600 mm︱cutting range max. 7000 mm︱control Siemens ︱hydraulic Rexroth Valve ︱coolant Pulverisiertes Schneidöl ︱weight of the machine ca. 5550 kg︱required space m︱

---

GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

capacity Ø 140 - 250 mm︱sawing motor 30 kW︱hydraulic motor 5,5 kW︱Saw Feeding Servo 3 KW Siemens︱Material Feeding Motor 3 KW Siemens︱Saw speed 30-80 rpm /min︱saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm︱cutting range min. 1000 mm︱cutting range max. 7000 mm︱control Siemens ︱hydraulic Rexroth Valve ︱coolant Pulverisiertes Schneidöl ︱required space 3500 x 8000 mm︱Saw speed 30-80 rpm / U pro min︱weight of the machine ca. 9000 kg︱

---

GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

cutting diameter 1850 mm︱saw band length 54 x 10566 mm︱Control NC ︱power 460v 60Hz ︱capacity 90 degrees: round 1854 mm︱capacity 45 degrees: round 1854 mm︱capacity 30 degrees: round 1854 mm︱weight of the machine ca. approx. 9000 kg︱required space 2,2 x 5 x 4 m︱

---

The KLY 1850 is a semi-automatic bandsaw that can perform mitre cuts up to 90°. This band saw is a special machine and can be customised to your requirements during production. Technical specifications - The machine is equipped with 3 wheels for cutting PE pipes - The up and down movement of the machine is on linear slides that prevent any kind of vibrations, allowing easy movement and comfortable cutting. - Air extraction and conveyor belt for the removal of chips/electrical dust - Hydraulic upper clamping device on the vice to hold the material in place - Up and down movement, automatic rotation around the angle, material feed, all controlled by a PLC control panel with touch screen. - Rotation around the angle is performed by a servo motor - Portable control panel - Note: Special V-shaped roller tables with 78" infeed and 39" outfeed are standard. Additional roller tables are available as an option. The KLY 1850 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Turkey. The pictures are for orientation only and do not represent a true-to-scale image of the machine.

cutting diameter 570 mm︱saw band length 7250 x 41 mm︱cutting width 1,3 mm︱capacity 90 degrees: square 550 x 550 mm︱capacity 90 degrees: flat 550 x 700 mm︱total power requirement 4 kW︱weight of the machine ca. 6050 kg︱required space 2600 x 1300 x 3700 m︱

---

The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

cutting diameter 1020 mm︱saw band length 9500 mm︱cutting width mm︱Control ︱total power requirement 7,5 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4500 x 1700 x 2750 mm︱

---

Brand: BMSY Type: 1020C Year of make: 2019 Capacity round 90º: 1.020 mm ø Capacity square 90º: 1.020 mm Capacity rectangular 90º: 1.020 x 1.020 mm Mitre: 45 ° Working height: 535 mm Saw blade dimension: 9.500 x 54 x 1,6 mm Saw motor: 7,5 kW Machine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mm Machine weight: 6.950 kg Clamp: 1 x 45 ° adjustable Hydraulic clamping including top clamp

cutting diameter 810 mm︱saw band length 8200 mm︱cutting width mm︱Control ︱total power requirement 4 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4020 x1630 x 2570 mm︱

---

Brand: BMSY Type: 810 CGH Year of make: 2019 Capacity round 45º: 555 mm ø Capacity round 60º: 320 mm ø Capacity round 90º: 810 mm ø Capacity square 45º: 700 mm Capacity square 60º: 310 mm Capacity square 90º: 770 mm Capacity rectangular 45º: 555 x 770 mm Capacity rectangular 60º: 310 x 770 mm Capacity rectangular 90º: 810 x 770 mm Mitre: 60 ° Saw blade dimension: 8.200 x 41 x 1,3 mm Saw speed: 20 - 100 m/min Saw motor: 4 kW Machine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mm Machine weight: 3.970 kg Cap. 30 ° round: 700 mm ø Cap. 30 ° straight: 700 x 770 mm Cap. 30 ° square: 700 mm

cutting diameter 560 mm︱saw band length mm︱cutting width mm︱

---

cutting diameter 550 - 610 mm︱dimensions of saw-band 6850 x 41 x 1,3 mm︱ 200 mm︱ 200 x 200 mm︱ 550 x 200 mm︱ 350 mm︱ 350 x 350 mm︱ 550 x 350 mm︱ 460 mm︱ 460 x 460 mm︱ 550 x 460 mm︱total power requirement 5,2 kW︱machine weight ab. 3150 kg︱dimensions of the machine ca. 3160 x 2060 x 2250 mm︱

---

cutting diameter 1 mm︱saw band length 1 mm︱cutting width 1 mm︱total power requirement 1 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱

---

cutting diameter 260 mm︱saw band length mm︱cutting width mm︱

---

cutting diameter 530 mm︱saw band length 6670 mm︱cutting width 530 mm︱Control CNC ︱main drive motor 7,5 kW︱roll guideway optional ︱total power requirement 13 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. m︱

---

Fully automatic band saw roller conveyor Dimensions: 4000x700

cutting diameter 250 mm︱saw band length 2570 x 27 x 0,9 mm︱work height max. 700 mm︱cutting speed 20 - 50 m/min︱machine weight ab. 720 kg︱dimensions ca. 2000 x 1500 x 1200 mm︱Control ︱

---

cutting range max. 371 x 371 mm︱feed: 800 mm 8-fach ︱weight of the machine ca. 5 t︱ ︱ ︱ ︱

---