Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Band Saw

          Machinelist: Band Saw


          Band Saw

          used Saws Band Saw KASTO - Vollautomat SBA 260 AU


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7268 · Band Saw

          KASTO - Vollautomat - SBA 260 AU - - unbekannt -

          Technical details
          cutting diameter 260 mm︱saw band length 3830 mm︱cutting width 260 mm︱cutting speed 17-110 m/min︱dimensions of saw-band 3830 x 25 x 0,9 mm︱ 260 x 260 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,2 x 2,3 x 1,8 m︱
          - simple automatic material feed: 750 mm - Multiple material feed (up to 9x): 6750 mm
            cutting diameter 260 mm
            saw band length 3830 mm
            cutting width 260 mm
            cutting speed 17-110 m/min
            dimensions of saw-band 3830 x 25 x 0,9 mm
            260 x 260 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,2 x 2,3 x 1,8 m
            Description :
            - simple automatic material feed: 750 mm
            - Multiple material feed (up to 9x): 6750 mm
          Datasheet
          Request / Contact
          used Saws Band Saw KASTO - Vollautomat PBA 320/460


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6923 · Band Saw

          KASTO - Vollautomat - PBA 320/460 - - unbekannt -

          Technical details
          cutting diameter 100 - 320 mm︱saw band length 4670 mm︱cutting width 580 mm︱cutting speed 16-160 m/min︱dimensions of saw-band 4670 x 38 mm︱ 100 x 320 / 100 x 460 mm︱total power requirement 7,4 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,8 x 2,9 x 2,2 m︱
            cutting diameter 100 - 320 mm
            saw band length 4670 mm
            cutting width 580 mm
            cutting speed 16-160 m/min
            dimensions of saw-band 4670 x 38 mm
            100 x 320 / 100 x 460 mm
            total power requirement 7,4 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 2,8 x 2,9 x 2,2 m
          Datasheet
          Request / Contact
          used Saws Band Saw KASTO


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1965 · Band Saw

          KASTO - - - unbekannt -

          Technical details
          Cutting height 140 mm︱cutting width 500 mm︱weight of the machine ca. 1,5 t︱
            Cutting height 140 mm
            cutting width 500 mm
            weight of the machine ca. 1,5 t
          Datasheet
          Request / Contact
          used Saws Band Saw


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1964 · Band Saw

          - - - unbekannt -

          Technical details
          cutting width 220 mm︱Cutting height 160 mm︱weight of the machine ca. 1,2 t︱
            cutting width 220 mm
            Cutting height 160 mm
            weight of the machine ca. 1,2 t
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z272/DGV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010842 · Band Saw

          ZIMMER - Z272/DGV - - NEU -

          Technical details
          capacity 90 degrees: round 265 mm︱capacity 90 degrees: square 265 x 265 mm︱capacity 90 degrees: flat 225 x 350 mm︱ 230 mm︱ 165 x 165 mm︱ 115 x 240 mm︱capacity 60 degrees: round 150 mm︱capacity 60 degrees: square 90 x 90 mm︱capacity 60 degrees: flat 90 x 150 mm︱ 200 mm︱ 170 x 170 mm︱ 60 x 250 mm︱cutting speed 20 - 85 m/min︱dimensions of saw-band 3150 x 27 x 0,9 mm︱ 355 mm︱work height max. 920 mm︱Motor output 1,5 kW︱Weight 450 kg︱
            capacity 90 degrees: round 265 mm
            capacity 90 degrees: square 265 x 265 mm
            capacity 90 degrees: flat 225 x 350 mm
            230 mm
            165 x 165 mm
            115 x 240 mm
            capacity 60 degrees: round 150 mm
            capacity 60 degrees: square 90 x 90 mm
            capacity 60 degrees: flat 90 x 150 mm
            200 mm
            170 x 170 mm
            60 x 250 mm
            cutting speed 20 - 85 m/min
            dimensions of saw-band 3150 x 27 x 0,9 mm
            355 mm
            work height max. 920 mm
            Motor output 1,5 kW
            Weight 450 kg
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z252/DG


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010839 · Band Saw

          ZIMMER - Z252/DG - - NEU -

          Technical details
          capacity 90 degrees: round 240 mm︱capacity 90 degrees: square 240 x 240 mm︱capacity 90 degrees: flat 165 x 210 mm︱ 195 mm︱ 185 x 185 mm︱ 130 x 190 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 85 x 85 mm︱capacity 60 degrees: flat 85 x 120 mm︱Motor output 1,2 kW︱ 170 mm︱ 145 x 145 mm︱ 60 x 195 mm︱cutting speed 36 + 72 m/min︱dimensions of saw-band 2725 x 27 x 0,9 mm︱ 315 mm︱work height max. 900 mm︱Weight 330 kg︱
            capacity 90 degrees: round 240 mm
            capacity 90 degrees: square 240 x 240 mm
            capacity 90 degrees: flat 165 x 210 mm
            195 mm
            185 x 185 mm
            130 x 190 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 85 x 85 mm
            capacity 60 degrees: flat 85 x 120 mm
            Motor output 1,2 kW
            170 mm
            145 x 145 mm
            60 x 195 mm
            cutting speed 36 + 72 m/min
            dimensions of saw-band 2725 x 27 x 0,9 mm
            315 mm
            work height max. 900 mm
            Weight 330 kg
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z252/DGV


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010840 · Band Saw

          ZIMMER - Z252/DGV - - NEU -

          Technical details
          capacity 90 degrees: round 240 mm︱capacity 90 degrees: square 240 x 240 mm︱capacity 90 degrees: flat 165 x 210 mm︱ 195 mm︱ 185 x 185 mm︱ 130 x 190 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 85 x 85 mm︱capacity 60 degrees: flat 85 x 120 mm︱ 170 mm︱ 145 x 145 mm︱ 60 x 195 mm︱cutting speed 20 - 85 m/min︱dimensions of saw-band 2725 x 27 x 0,9 mm︱ 315 mm︱work height max. 900 mm︱Motor output 1,2 kW︱Weight 330 kg︱
            capacity 90 degrees: round 240 mm
            capacity 90 degrees: square 240 x 240 mm
            capacity 90 degrees: flat 165 x 210 mm
            195 mm
            185 x 185 mm
            130 x 190 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 85 x 85 mm
            capacity 60 degrees: flat 85 x 120 mm
            170 mm
            145 x 145 mm
            60 x 195 mm
            cutting speed 20 - 85 m/min
            dimensions of saw-band 2725 x 27 x 0,9 mm
            315 mm
            work height max. 900 mm
            Motor output 1,2 kW
            Weight 330 kg
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 282 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010260 · Band Saw

          MEP - Shark 282 SXI EVO - - Neu -

          Technical details
          36/72 m/min︱ 285 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: flat 280x220 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 80 mm︱capacity 60 degrees: flat 140x100 mm︱capacity 45 degrees: round 230/200 mm︱capacity 45 degrees: square 200/170 mm︱capacity 45 degrees: flat 220x200/200x140 mm︱total power requirement 1,5/1,8 kW︱Weight 485 kg︱Overall size 1970x1150x1840 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.
            36/72 m/min
            285 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 220 mm
            capacity 90 degrees: flat 280x220 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 80 mm
            capacity 60 degrees: flat 140x100 mm
            capacity 45 degrees: round 230/200 mm
            capacity 45 degrees: square 200/170 mm
            capacity 45 degrees: flat 220x200/200x140 mm
            total power requirement 1,5/1,8 kW
            Weight 485 kg
            Overall size 1970x1150x1840 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts, vice opens

            Semiautomatic dynamic system:
            Manual lowering of the saw blade to the desired
            Position and cycle start via the manual button.
            Upper position is saved automatically.
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 332-1 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010311 · Band Saw

          MEP - Shark 332-1 SXI EVO - - Neu -

          Technical details
          36/72 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱capacity 45 degrees: round 260/200 mm︱capacity 45 degrees: square 250/180 mm︱capacity 45 degrees: flat 270x200/200x160 mm︱dimensions of saw-band 3650x27x0,9 mm︱total power requirement 1,5/1,8 kW︱Overall size 2130x1400x1950 mm︱Weight 670 kg︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.
            36/72 m/min
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            capacity 45 degrees: round 260/200 mm
            capacity 45 degrees: square 250/180 mm
            capacity 45 degrees: flat 270x200/200x160 mm
            dimensions of saw-band 3650x27x0,9 mm
            total power requirement 1,5/1,8 kW
            Overall size 2130x1400x1950 mm
            Weight 670 kg
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts, vice opens

            Semiautomatic dynamic system:
            Manual lowering of the saw blade to the desired position and cycle start
            over the hand switch. Upper position is saved automatically.
          Datasheet
          Request / Contact
          used Saws Band Saw MEP SHARK 332-1 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010628 · Band Saw

          MEP - SHARK 332-1 CCS - - NEU -

          Technical details
          dimensions of saw-band 3320x27x0,9 mm︱ 40/80 m/min︱ 335 mm︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330x260 mm︱ 260 mm︱ 250270x200 mm︱capacity 60 degrees: round 180 mm︱capacity 60 degrees: square 170 mm︱capacity 60 degrees: flat 170x170 mm︱ 200 mm︱ 180 mm︱ 200x160 mm︱weight of the machine ca. 640 kg︱dimensions of the machine ca. 2140x1300x1950 mm︱
            dimensions of saw-band 3320x27x0,9 mm
            40/80 m/min
            335 mm
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330x260 mm
            260 mm
            250
            270x200 mm
            capacity 60 degrees: round 180 mm
            capacity 60 degrees: square 170 mm
            capacity 60 degrees: flat 170x170 mm
            200 mm
            180 mm
            200x160 mm
            weight of the machine ca. 640 kg
            dimensions of the machine ca. 2140x1300x1950 mm
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 281 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10048 · Band Saw

          MEP - Shark 281 CCS - - Neu -

          Technical details
          dimensions of saw-band 2950x27x0,9 mm︱ 36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 230 mm︱capacity 90 degrees: flat 280x200 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: square 180 mm︱capacity 45 degrees: flat 180x180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 110x110 mm︱total power requirement 1,5/1,8 kW︱weight 375 kg︱dimensions 1700x1000x1650 mm︱
          Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed
            dimensions of saw-band 2950x27x0,9 mm
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 230 mm
            capacity 90 degrees: flat 280x200 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: square 180 mm
            capacity 45 degrees: flat 180x180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 110x110 mm
            total power requirement 1,5/1,8 kW
            weight 375 kg
            dimensions 1700x1000x1650 mm
            Description :
            Domestic equipments:
            - with semi-automatic lowering
            - The CUT CONTROL SYSTEM allows semi-automatic lowering of the
            Saw bow by the weight of the saw head
            - The lowering speed is infinitely regulated. Single cuts can do so
            be carried out with uniform feed
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 282 CCS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10049 · Band Saw

          MEP - Shark 282 CCS - - Neu -

          Technical details
          dimensions of saw-band 2950x27x0,9 mm︱ 36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 220 mm︱capacity 90 degrees: flat 280x220 mm︱capacity 45 degrees: round 230/200 mm︱capacity 45 degrees: square 200/170 mm︱capacity 45 degrees: flat 220x200/200x140 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 80 mm︱capacity 60 degrees: flat 140x100 mm︱output 1,5 / 1,8 kW︱Weight 440 kg︱dimensions 1700x1000x1650 mm︱
          - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove
            dimensions of saw-band 2950x27x0,9 mm
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 220 mm
            capacity 90 degrees: flat 280x220 mm
            capacity 45 degrees: round 230/200 mm
            capacity 45 degrees: square 200/170 mm
            capacity 45 degrees: flat 220x200/200x140 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 80 mm
            capacity 60 degrees: flat 140x100 mm
            output 1,5 / 1,8 kW
            Weight 440 kg
            dimensions 1700x1000x1650 mm
            Description :
            - with semi-automatic lowering
            - The CUT CONTROL SYSTEM allows semi-automatic lowering of the
            Saw bow by the weight of the saw head
            - The lowering speed is infinitely regulated. Single cuts can do so
            be carried out with uniform feed
            - The SHARK 282 CCS has a turntable for double-sided miter. The cut
            always takes place in the same groove
          Datasheet
          Request / Contact
          used Saws Band Saw MEBA MEBAswing 320 G-HSS


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010804 · Band Saw

          MEBA - MEBAswing 320 G-HSS - - Neu -

          Technical details
          15-150 m/min︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500 x 300 mm︱capacity 45 degrees: round 300 mm︱capacity 45 degrees: flat 300 x 300 mm︱ 200 mm︱ 200 x 200 mm︱ 60 mm︱dimensions of saw-band 4200 x 34 x 1,1 mm︱ 165 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3 kW︱dimensions 1300 x 2050 x 1400 mm︱weight 910 kg︱
          Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the Sawing frame and hydraulic clamping of the sawing material. stepless hydraulic cutting and feed regulation. Display lowering speed about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the Sawing frame via pushbutton to material edge - Frequency-controlled AC drive 15-150 m / min, 3 kW - Hydraulic material full lift voltage - Hydraulic lifting and lowering of the saw frame - Hydraulic clamping of the material
            15-150 m/min
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500 x 300 mm
            capacity 45 degrees: round 300 mm
            capacity 45 degrees: flat 300 x 300 mm
            200 mm
            200 x 200 mm
            60 mm
            dimensions of saw-band 4200 x 34 x 1,1 mm
            165 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3 kW
            dimensions 1300 x 2050 x 1400 mm
            weight 910 kg
            Description :
            Standard equipment:
            - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy
            according to scale. The miter turning point is the point of intersection between saw band and
            Material system, thereby no change in the length dimension
            - At each angular position of the saw frame, the material is parallel in 90°
            tightened
            - Complete coolant device with electric submersible pump
            - Machine stand with chip collecting tray
            - Precise saw band carbide roller guide, saw blade brush
            - 1 saw blade on machine 4-6 ZpZ
            - MEBA high performance package version "HSS": Hydraulic lifting and lowering of the
            Sawing frame and hydraulic clamping of the sawing material. stepless
            hydraulic cutting and feed regulation. Display lowering speed
            about scale. Display of cutting pressure via pressure gauge. Rapid traverse reduction of the
            Sawing frame via pushbutton to material edge
            - Frequency-controlled AC drive 15-150 m / min, 3 kW
            - Hydraulic material full lift voltage
            - Hydraulic lifting and lowering of the saw frame
            - Hydraulic clamping of the material
          Datasheet
          Request / Contact
          used Saws Band Saw MEP - Vollautomat SHARK 332-1 NC 5.0


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7228 · Band Saw

          MEP - Vollautomat - SHARK 332-1 NC 5.0 - - NEU - Windows CE basiert

          Technical details
          cutting diameter 300 mm︱saw band length 3650 mm︱cutting width 330 mm︱dimensions of saw-band 3650 x 27 x 0,9 mm︱band speed 15 - 100 m/min︱capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 260 mm︱capacity 90 degrees: flat 330 x 260 mm︱capacity 45 degrees: round li. 260 / re. 200 mm︱capacity 45 degrees: square li. 250 / re. 180 mm︱capacity 45 degrees: flat li. 270x200 re. 200x160 mm︱capacity 60 degrees: round li. 180 mm︱capacity 60 degrees: square li. 170 mm︱capacity 60 degrees: flat li. 170 x 170 mm︱motor 2,2 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,9 x 1,8 m︱Control Windows CE basiert
          Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left). -Manual or semi-automatic dynamic cycle to make cuts outside of series production directly without programming. -Numerically controlled band saw machines with the new Windows “CE” based control, specially developed by MEP for automatic machines. FEATURES: -User interface with 7 ”touch screen display and mechanical keys for the operating functions of the sawing machine, guarantees reliable operation, simple and intuitive, and real-time control of all cutting parameters. - Protective housing for the safety of the worker -The control console on a swiveling arm enables comfortable and safe operation from any position. -Display and entry of alarm and error messages with the option of displaying incidents that have occurred. - Infinitely variable regulation of the cutting speed from 15 to 100 m / min via frequency converter (inverter). -The latest generation of hydraulic power pack, extremely powerful with low energy consumption. -Material feed with stepper motor via ball screw mounted on opposing ball bearings; 600 mm repeatable single stroke to saw any length. -Positioning of the saw head and movement of the feeder using a joystick. -Automatic detection of the cutting start position. -Hand-operated strap tension control with indication on the display by means of an electronic converter. -Automatic monitoring of the cutting load through a servo valve mounted directly on the cylinder. -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of the saw band) is built into the underframe -The chip drawer can be replaced by a motorized chip conveyor - see special accessories. -Preparation for the installation of the OPTIONAL minimum quantity lubrication system in addition to the conventional standard lubrication with emulsion oil. -Schipping brush. -Bimetal saw band for solid and profile material. -Tool and instructions for use with list of spare parts.
            cutting diameter 300 mm
            saw band length 3650 mm
            cutting width 330 mm
            dimensions of saw-band 3650 x 27 x 0,9 mm
            band speed 15 - 100 m/min
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 260 mm
            capacity 90 degrees: flat 330 x 260 mm
            capacity 45 degrees: round li. 260 / re. 200 mm
            capacity 45 degrees: square li. 250 / re. 180 mm
            capacity 45 degrees: flat li. 270x200 re. 200x160 mm
            capacity 60 degrees: round li. 180 mm
            capacity 60 degrees: square li. 170 mm
            capacity 60 degrees: flat li. 170 x 170 mm
            motor 2,2 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,9 x 1,8 m
            Control Windows CE basiert
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 ° left

            Electro-hydraulic CNC machine with Windows CE based touch screen control

            -Automatic cycle (cuts from 0 ° to 60 ° left)
            -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right
            to 60 ° left).
            -Manual or semi-automatic dynamic cycle to make cuts outside of series
            production directly without programming.
            -Numerically controlled band saw machines with the new Windows “CE” based
            control, specially developed by MEP for automatic machines.

            FEATURES:
            -User interface with 7 ”touch screen display and mechanical keys for the
            operating functions of the sawing machine, guarantees reliable operation,
            simple and intuitive, and real-time control of all cutting parameters.
            - Protective housing for the safety of the worker
            -The control console on a swiveling arm enables comfortable and safe operation
            from any position.
            -Display and entry of alarm and error messages with the option of displaying
            incidents that have occurred.
            - Infinitely variable regulation of the cutting speed from 15 to 100 m / min
            via frequency converter (inverter).
            -The latest generation of hydraulic power pack, extremely powerful with low
            energy consumption.
            -Material feed with stepper motor via ball screw mounted on opposing ball
            bearings; 600 mm repeatable single stroke to saw any length.
            -Positioning of the saw head and movement of the feeder using a joystick.
            -Automatic detection of the cutting start position.
            -Hand-operated strap tension control with indication on the display by means of
            an electronic converter.
            -Automatic monitoring of the cutting load through a servo valve mounted
            directly on the cylinder.
            -The coolant pan (equipped with 2 electric pumps for lubrication and cooling of
            the saw band) is built into the underframe
            -The chip drawer can be replaced by a motorized chip conveyor - see special
            accessories.
            -Preparation for the installation of the OPTIONAL minimum quantity lubrication
            system in addition to the conventional standard lubrication with emulsion oil.
            -Schipping brush.
            -Bimetal saw band for solid and profile material.
            -Tool and instructions for use with list of spare parts.
          Datasheet
          Request / Contact
          used Saws Band Saw BERG & SCHMID GBS 242 DG Auto CUT


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5283 · Band Saw

          BERG & SCHMID - GBS 242 DG Auto CUT - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2965 mm︱table height -- mm︱ 285 mm︱ 37 + 74 m/min︱ 2965x 27 x 0,9 mm︱ 130 mm︱ 130 mm︱ 130 x 140 mm︱ 200200200 x 200240 mm︱ 200 mm︱ 285 x 2001,1/1,3 kW︱ 0,3 t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            cutting diameter 250 mm
            saw band length 2965 mm
            table height -- mm
            285 mm
            37 + 74 m/min
            2965x 27 x 0,9 mm
            130 mm
            130 mm
            130 x 140 mm
            200
            200
            200 x 200
            240 mm
            200 mm
            285 x 200
            1,1/1,3 kW
            0,3 t
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z 241-1/R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010837 · Band Saw

          ZIMMER - Z 241-1/R - - Neu -

          Technical details
          capacity 90 degrees: round 220 mm︱capacity 90 degrees: square 210x210 mm︱capacity 90 degrees: flat 230x185 mm︱ 150 mm︱ 150x150 mm︱ 150x210 mm︱ 90 mm︱ 90x90 mm︱ 90x100 mm︱dimensions of saw-band 2450x27x0,9 mm︱cutting speed 35/70 m/min︱work height max. 915 mm︱ 265 mm︱total power requirement 1,2 kW︱weight of the machine ca. 240 kg︱dimensions of the machine ca. 1550x870x1740 mm︱
          Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A
            capacity 90 degrees: round 220 mm
            capacity 90 degrees: square 210x210 mm
            capacity 90 degrees: flat 230x185 mm
            150 mm
            150x150 mm
            150x210 mm
            90 mm
            90x90 mm
            90x100 mm
            dimensions of saw-band 2450x27x0,9 mm
            cutting speed 35/70 m/min
            work height max. 915 mm
            265 mm
            total power requirement 1,2 kW
            weight of the machine ca. 240 kg
            dimensions of the machine ca. 1550x870x1740 mm
            Description :
            Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position.

            Standard features:
            - Hydraulic cylinder
            - emulsion pump
            - Eccentric tensioner
            - Underframe
            - saw blade
            - 400V plug 16A
          Datasheet
          Request / Contact
          used Saws Band Saw MEBA MEBAswing 320 DG


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010690 · Band Saw

          MEBA - MEBAswing 320 DG - - Neu -

          Technical details
          35/75 m/min︱sawband speed 15-150 m/min︱dimensions of saw-band 4200x34x1,1 mm︱capacity 90 degrees: round 325 mm︱capacity 90 degrees: flat 500x300 mm︱ 300 mm︱ 300x300 mm︱ 200 mm︱ 200x200 mm︱ 300 mm︱ 300x300 mm︱ 85 mm︱ 260 mm︱min. dia. 5 mm︱work height max. 750 mm︱total power requirement 3,0 kW︱dimensions 1450x2200x1400 mm︱
          Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°. - Manual material tension. At each angular position of the saw frame is the Material tightened parallel in 90°. - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering the saw frame and hydraulic clamping of the sawing material Stepless hydraulic cutting pressure and feed regulation Display lowering speed over scale. Display section via pressure gauge. Rapid traverse reduction of the saw frame via pushbutton to material edge - Frequency controlled AC drive 15-150 m / min - 3 kW - Hydraulic material full lift voltage - Machine stand with chip collecting tray - Sägebandantieb with limit switch - Precise saw band carbide roller guide, saw blade brush - Complete coolant device with electric submersible pump
            35/75 m/min
            sawband speed 15-150 m/min
            dimensions of saw-band 4200x34x1,1 mm
            capacity 90 degrees: round 325 mm
            capacity 90 degrees: flat 500x300 mm
            300 mm
            300x300 mm
            200 mm
            200x200 mm
            300 mm
            300x300 mm
            85 mm
            260 mm
            min. dia. 5 mm
            work height max. 750 mm
            total power requirement 3,0 kW
            dimensions 1450x2200x1400 mm
            Description :
            Equipment / Accessories:
            - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°.
            - Manual material tension. At each angular position of the saw frame is the
            Material tightened parallel in 90°.
            - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering
            the saw frame and hydraulic clamping of the sawing material
            Stepless hydraulic cutting pressure and feed regulation
            Display lowering speed over scale. Display section via pressure gauge.
            Rapid traverse reduction of the saw frame via pushbutton to material edge
            - Frequency controlled AC drive 15-150 m / min - 3 kW
            - Hydraulic material full lift voltage
            - Machine stand with chip collecting tray
            - Sägebandantieb with limit switch
            - Precise saw band carbide roller guide, saw blade brush
            - Complete coolant device with electric submersible pump
          Datasheet
          Request / Contact
          used Saws Band Saw MEP - Halbautomat Shark 281 SXI evo


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5282 · Band Saw

          MEP - Halbautomat - Shark 281 SXI evo - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱table height -- mm︱ 280 mm︱ 2950 x 27 x 0,9 mm︱ 280 x 200 mm︱ 230 mm︱ 190 mm︱ 180 x 180 mm︱ 180 mm︱ 120 mm︱ 110 x 110 mm︱ 110 mm︱ 36 / 72 m/min︱ 1,5 / 1,8 kW︱
          powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)
            cutting diameter 250 mm
            saw band length 2950 mm
            table height -- mm
            280 mm
            2950 x 27 x 0,9 mm
            280 x 200 mm
            230 mm
            190 mm
            180 x 180 mm
            180 mm
            120 mm
            110 x 110 mm
            110 mm
            36 / 72 m/min
            1,5 / 1,8 kW
            Description :
            powerful, electro-hydraulic, semi-automatic band saw machine for
            Miter cuts from 0 ° to 60 ° left.

            Control modes:
            Semi-automatic operation (start / stop position of the saw bow is controlled by
            the Keyboard programmed. Vice closes / opens automatically, saw bow
            is automatically returned to the beginning of the cut)

            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Control panel on vertical post, swiveling, contains all operating elements
            -Control with soft-touch keyboard, backlit display for display
            all machine parameters and messages in plain text:
            Number of cuts (piece counter) + cutting time + power consumption of the
            Saw band motor + saw band tension in kg (minimum band tension = 900 kg) +
            Saw frame position (Y-axis) / alarms / faults (description and causes) +
            Diagnosis…
            -Saw band tension with band tension control and indication on the display by
            means of electronic converter
            -Underframe with lockable door and removable coolant tray, electric coolant
            pump.
            -Vise with quick adjustment
            -Schipping brush for cleaning the saw band
            -Machine is prepared for all options (see price list). (Electric wire,
            Software etc.)
          Datasheet
          Request / Contact
          used Saws Band Saw MEP PH 261-1 HB


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3916 · Band Saw

          MEP - PH 261-1 HB - - NEU -

          Technical details
          cutting diameter 225 mm︱saw band length 2450 mm︱table height mm︱cutting width 240 mm︱dimensions of saw-band 2450 x 27 x 0,9 mm︱area output 240 mm︱band speed 46/92 m/min︱capacity 90 degrees: round 225 mm︱capacity 90 degrees: square 200 mm︱capacity 90 degrees: flat 240 x 160 mm︱capacity 45 degrees: round 160 mm︱capacity 45 degrees: flat 155 x 115 mm︱capacity 45 degrees: square 140 mm︱capacity 60 degrees: round 90 mm︱capacity 60 degrees: flat 90 x 90 mm︱capacity 60 degrees: square 90 mm︱total power requirement 1,4 kW︱weight of the machine ca. 0,24 t︱dimensions of the machine ca. m︱
          Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Saw band tension with limit switch to check the correct band tension -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band
            cutting diameter 225 mm
            saw band length 2450 mm
            cutting width 240 mm
            dimensions of saw-band 2450 x 27 x 0,9 mm
            area output 240 mm
            band speed 46/92 m/min
            capacity 90 degrees: round 225 mm
            capacity 90 degrees: square 200 mm
            capacity 90 degrees: flat 240 x 160 mm
            capacity 45 degrees: round 160 mm
            capacity 45 degrees: flat 155 x 115 mm
            capacity 45 degrees: square 140 mm
            capacity 60 degrees: round 90 mm
            capacity 60 degrees: flat 90 x 90 mm
            capacity 60 degrees: square 90 mm
            total power requirement 1,4 kW
            weight of the machine ca. 0,24 t
            Description :
            Compact, powerful workshop miter band saw machine for cuts from
            0 ° to 60 ° left

            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring

            Description:
            -Manual cutting cycle and automatic cutting
            -AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            -Stable, torsion-resistant and low-vibration saw frame made of cast steel
            -Vice with quick release
            - Carbide band guides for maximum cutting precision
            -Large dimensioned deflection discs, adjustable made of cast steel
            -Saw band tension with limit switch to check the correct band tension
            -Clearly arranged control panel with all controls
            -Electric coolant pump for cooling and lubricating the saw band
            -Schipping brush for cleaning the saw band
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z 185-1/R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010838 · Band Saw

          ZIMMER - Z 185-1/R - - NEU -

          Technical details
          dimensions of saw-band 2085x20x0,9 mm︱capacity 90 degrees: round 185 mm︱capacity 90 degrees: square 150x150 mm︱capacity 90 degrees: flat 220x150 mm︱ 110 mm︱ 100x100 mm︱ 110x90 mm︱capacity 60 degrees: round 70 mm︱capacity 60 degrees: square 70x70 mm︱capacity 60 degrees: flat 70x70 mm︱voltage 230 V︱sawband speed 30-75 m/min.︱ 230 mm︱total power requirement 2,35 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 1280x550x1480 mm︱
          Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet
            dimensions of saw-band 2085x20x0,9 mm
            capacity 90 degrees: round 185 mm
            capacity 90 degrees: square 150x150 mm
            capacity 90 degrees: flat 220x150 mm
            110 mm
            100x100 mm
            110x90 mm
            capacity 60 degrees: round 70 mm
            capacity 60 degrees: square 70x70 mm
            capacity 60 degrees: flat 70x70 mm
            voltage 230 V
            sawband speed 30-75 m/min.
            230 mm
            total power requirement 2,35 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 1280x550x1480 mm
            Description :
            Domestic equipments:
            - stepless, electronic speed control
            - Optional hydraulically controlled or manual belt arm lowering
            - Saw arm can be swiveled up to 60 ° right
            - quick release vice
            - Band guide with 8 ball bearings
            - Hydraulic saw blade clamping with clamping pressure display and strip break-off
            - Including coolant device
            - incl. machine cabinet
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 281 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010270 · Band Saw

          MEP - Shark 281 SXI EVO - - Neu -

          Technical details
          36/72 m/min︱ 285 mm︱capacity 90 degrees: round 250 mm︱capacity 90 degrees: square 230 mm︱capacity 90 degrees: flat 280x200 mm︱capacity 45 degrees: round 190 mm︱capacity 45 degrees: square 180 mm︱capacity 45 degrees: flat 180x180 mm︱capacity 60 degrees: round 120 mm︱capacity 60 degrees: square 110 mm︱capacity 60 degrees: flat 110x110 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱output 1,5 / 1,8 kW︱Weight 435 kg︱dimensions 1700x1000x1840 mm︱
          Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
            36/72 m/min
            285 mm
            capacity 90 degrees: round 250 mm
            capacity 90 degrees: square 230 mm
            capacity 90 degrees: flat 280x200 mm
            capacity 45 degrees: round 190 mm
            capacity 45 degrees: square 180 mm
            capacity 45 degrees: flat 180x180 mm
            capacity 60 degrees: round 120 mm
            capacity 60 degrees: square 110 mm
            capacity 60 degrees: flat 110x110 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            output 1,5 / 1,8 kW
            Weight 435 kg
            dimensions 1700x1000x1840 mm
            Description :
            Semi-automatic function:
            - Vice closes and engine starts
            - Saw head lowers for the cut
            - Engine shuts off
            - Saw head lifts - vise opens
          Datasheet
          Request / Contact
          used Saws Band Saw MEP Shark 282 CCS


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3925 · Band Saw

          MEP - Shark 282 CCS - - NEU -

          Technical details
          cutting diameter 250 mm︱saw band length 2950 mm︱cutting width 280 mm︱ 2950 x 27 x 0,9 mm︱ 285 mm︱ 36 / 72 m/min︱ 250 mm︱ 220 mm︱ 280 x 220 mm︱ 120 mm︱ 140 x 80 mm︱ 80 mm︱ 200 mm︱ links 220 x 200 / rechts mm︱ links 200 / rechts 170 mm︱ 1,86 kW︱ 0,4 t︱ 1,8 x 1,3 x 1,8 m︱
          Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band
            cutting diameter 250 mm
            saw band length 2950 mm
            cutting width 280 mm
            2950 x 27 x 0,9 mm
            285 mm
            36 / 72 m/min
            250 mm
            220 mm
            280 x 220 mm
            120 mm
            140 x 80 mm
            80 mm
            200 mm
            links 220 x 200 / rechts mm
            links 200 / rechts 170 mm
            1,86 kW
            0,4 t
            1,8 x 1,3 x 1,8 m
            Description :
            Powerful miter band saw for cuts from 45 ° right to 60 °
            Left

            CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
            Feed and switch-off at the end of the cut)

            Manual cutting cycle
            AUTOMATIC CUT: (via selector switch) with stepless settings of the
            Lowering speed and adjustment of the cutting pressure via compensating spring
            Stable, torsion-resistant and low-vibration saw frame made of cast steel
            Large, easily adjustable and mounted turntable, by means of central axis bolts
            centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside
            Table clamp for intermediate angles
            Vice with quick adjustment
            Carbide band guides for maximum cutting precision
            Large deflection discs, adjustable, made of cast steel
            Hydraulic unit for the saw band tension and monitoring with display
            Manometer (belt tension = 900 kg)
            Clear switchboard with all controls
            Underframe with lockable door and removable coolant tray,
            electric coolant pump
            Chip removal brush for cleaning the saw band
          Datasheet
          Request / Contact
          used Saws Band Saw MEP SHARK 382-1 SXI EVO


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010818 · Band Saw

          MEP - SHARK 382-1 SXI EVO - - NEU -

          Technical details
          capacity 90 degrees: round 300 mm︱capacity 90 degrees: square 250 mm︱capacity 90 degrees: flat 380x250 mm︱ 260 mm︱ 250 mm︱ 300x200 mm︱ 180 mm︱ 170 mm︱ 200x170 mm︱ 240 mm︱ 210 mm︱ 280x160 mm︱dimensions of saw-band 3770x27x0,9 mm︱speed 40/80 m/min︱ 385 mm︱total power requirement 1,5/1,8 kW︱weight 695 kg︱
            capacity 90 degrees: round 300 mm
            capacity 90 degrees: square 250 mm
            capacity 90 degrees: flat 380x250 mm
            260 mm
            250 mm
            300x200 mm
            180 mm
            170 mm
            200x170 mm
            240 mm
            210 mm
            280x160 mm
            dimensions of saw-band 3770x27x0,9 mm
            speed 40/80 m/min
            385 mm
            total power requirement 1,5/1,8 kW
            weight 695 kg
          Datasheet
          Request / Contact
          used Saws Band Saw ZIMMER Z 150/R


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-5010710 · Band Saw

          ZIMMER - Z 150/R - - Neu -

          Technical details
          25-138 m/min︱dimensions of saw-band 1440x13x0,65 mm︱capacity 90 degrees: round 150 mm︱capacity 90 degrees: square 125 mm︱capacity 90 degrees: flat 150x125 mm︱capacity 45 degrees: round 75 mm︱capacity 45 degrees: square 50 mm︱capacity 45 degrees: flat 70x50 mm︱weight of the machine ca. 35 kg︱
          Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control
            25-138 m/min
            dimensions of saw-band 1440x13x0,65 mm
            capacity 90 degrees: round 150 mm
            capacity 90 degrees: square 125 mm
            capacity 90 degrees: flat 150x125 mm
            capacity 45 degrees: round 75 mm
            capacity 45 degrees: square 50 mm
            capacity 45 degrees: flat 70x50 mm
            weight of the machine ca. 35 kg
            Description :
            Standard features:
            - Single-phase 1800 watt motor
            - Safety switch
            - Electronic rotary speed controller 25-138 m / min. with torque control
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Find the best deal on a band saw at LagerMaschinen
          Your new band saw is waiting for you at LagerMaschinen

          The term 'band saw' refers to a large range of products with a broad spectrum of functions. Depending on the blade in use band saws can be used for precise and detailed cutting as well as mass chopping and ripping. The multi-functional nature of the band saw makes it a great investment for businesses as one machine can meet a wide variety of needs. If you're in the market for a used band saw check out the great variety available at LagerMaschinen.

          Band saws offer versatility efficiency and accuracy

          Band saws have many advantages over other types of cutting methods. Since a band saw can be powered in a variety of ways including wind and steam power they can be utilized in green environmentally conscious manufacturing. Band saws are suited to cutting metal wood and other materials making them versatile and functional. Depending on the blade size a band saw can do both precision cutting and mass chopping. Find the best used band saws at LagerMaschinen!

          Make the most of your money and time with a trip to LagerMaschinen

          Investing in used machinery is a smart move for anyone looking to minimize cost and hassle. Used machines offer a high level of quality without cutting deeply into your budget. LagerMaschinen is the ideal forum for shopping for used equipment such as a band saw. The user-friendly interface makes the browsing and buying process a breeze. Shop by location specific need or price and find the perfect band saw or other machine for your needs!