,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Toggle Press - Single Column

          Machinelist: Toggle Press - Single Column


          Toggle Press - Single Column

          used Presses Toggle Press - Single Column REKORD UNBEKANNT


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24069 · Toggle Press - Single Column

          REKORD - UNBEKANNT - - UNBEKANNT -

          Technical details
          pressure 3 t︱throat 55-120 mm︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,6x0,5x1,75 m︱
            pressure 3 t
            throat 55-120 mm
            weight of the machine ca. 0,4 t
            dimensions of the machine ca. 0,6x0,5x1,75 m


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column SCHULER PKN1A - 260 t


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183020V · Toggle Press - Single Column

          SCHULER - PKN1A - 260 t - - 2012 - Siemens S 7

          Technical details
          pressure 260 t︱distance between columns 360/270 mm︱stroke 60 mm︱Stroke rate 50 / min︱Distance table/ram, max. stroke up, adjustment up 225 mm︱Table surface area 340 x 380 mm︱table height over floor 800 mm︱Ram surface 230 x 220 mm︱Ram adjustment 12 mm︱Power capacity 4,5 kW︱Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m︱Weight 4,5 t︱
          Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) can be offered without or with putting into operation in given condition
            pressure 260 t
            distance between columns 360/270 mm
            stroke 60 mm
            Stroke rate 50 / min
            Distance table/ram, max. stroke . 225 mm
            Table surface area 340 x 380 mm
            table height over floor 800 mm
            Ram surface 230 x 220 mm
            Ram adjustment 12 mm
            Power capacity 4,5 kW
            Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m
            Weight 4,5 t
            Description :
            Overhauled in 2012
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column GRAEBENER multi-station press GKN 400/1000/450


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173066B · Toggle Press - Single Column

          GRAEBENER multi-station press - GKN 400/1000/450 - - 2003 - Siemens S 7

          Technical details
          pressure 400 t︱distance between columns 1060 mm︱stroke 450 mm︱no. of strokes 15 - 30 /min︱distance table/ram, max. stroke up, adjustment up 1160 mm︱table surface area 1000 x 700 mm︱capacity of ejector in table 2 x 16 t︱ejector stroke of ejector in table 125 mm︱Die cushion pressure in table 120 t︱Die cushion stroke in table 2 mm︱capacity of ejector in ram 2 x 4 t︱stroke of ejector in ram 100 mm︱ram surface 1000 x 700 mm︱column travel -side 630 mm︱power capacity 55,0 kW︱weight 50,0 t︱Dimensions (WxDxH) m︱
          year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) stored in dismantled condition - can only be offered without putting into operation
            pressure 400 t
            distance between columns 1060 mm
            stroke 450 mm
            no. of strokes 15 - 30 /min
            distance table/ram, max. stroke . 1160 mm
            table surface area 1000 x 700 mm
            capacity of ejector in table 2 x 16 t
            ejector stroke of ejector in tab. 125 mm
            Die cushion pressure in table 120 t
            Die cushion stroke in table 2 mm
            capacity of ejector in ram 2 x 4 t
            stroke of ejector in ram 100 mm
            ram surface 1000 x 700 mm
            column travel -side 630 mm
            power capacity 55,0 kW
            weight 50,0 t
            Description :
            year of manufacture 1986 - overhaul 2003
            multi-station press
            with automatic parts feed, Transfer, drawing cushion in table (2. stage)
            stored in dismantled condition - can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column SCHULER KB 2-1000-1,25-315


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-193008B · Toggle Press - Single Column

          SCHULER - KB 2-1000-1,25-315 - - 1997 - Siemens S5 / S7

          Technical details
          pressure 1000 t︱distance between columns 1260 mm︱stroke 315 mm︱no. of strokes 10, 21 - 42 /min︱distance table/ram, max. stroke up, adjustment up 1295 mm︱table surface area 1250 x 800 mm︱table height over floor 670 mm︱side window 830 mm︱capacity of ejector in table 63 t︱ejector stroke of ejector in table 75 mm︱capacity of ejector in ram 16 t︱stroke of ejector in ram 23 mm︱ram surface 1250 x 800 mm︱ram adjustment 20 mm︱feeding length transfer 0 - 250 mm︱closing travel of each rail programmable 0 - 140 mm︱no. of strokes of the transfer 42 /min︱power requirement 135,0 kW︱weight 120,0 t︱Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m︱
          with ejector in table and ram, material feeding system, tool changing cars (Hywema, yom 1997; loading weight 2 x 3000 kg), CNC 2-axis transfer (Dreher, yom 2008), optical parts detection, washing unit, robots for taking out and stacking control of the press: Siemens S 5; control of the feeder: Siemens S 7 stored in dismantled condition - Video at seller's site before dismantling available
            pressure 1000 t
            distance between columns 1260 mm
            stroke 315 mm
            no. of strokes 10, 21 - 42 /min
            distance table/ram, max. stroke . 1295 mm
            table surface area 1250 x 800 mm
            table height over floor 670 mm
            side window 830 mm
            capacity of ejector in table 63 t
            ejector stroke of ejector in tab. 75 mm
            capacity of ejector in ram 16 t
            stroke of ejector in ram 23 mm
            ram surface 1250 x 800 mm
            ram adjustment 20 mm
            feeding length transfer 0 - 250 mm
            closing travel of each rail prog. 0 - 140 mm
            no. of strokes of the transfer 42 /min
            power requirement 135,0 kW
            weight 120,0 t
            Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m
            Description :
            with ejector in table and ram, material feeding system, tool changing cars (Hywema, yom 1997; loading weight 2 x 3000 kg), CNC 2-axis transfer (Dreher, yom 2008), optical parts detection, washing unit, robots for taking out and stacking
            control of the press: Siemens S 5; control of the feeder: Siemens S 7
            stored in dismantled condition - Video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column GRAEBENER GKS 800 (CE)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183005B · Toggle Press - Single Column

          GRAEBENER - GKS 800 (CE) - - 1995 - Siemens S 5

          Technical details
          pressure 800 t︱distance between columns 1050 mm︱stroke 200 mm︱no. of strokes 8 - 25 /min︱distance table/ram, max. stroke up, adjustment up 1300 mm︱Side window 550 mm︱table surface area 1030 x 900 mm︱Capacity of ejector in table 15 t︱Stroke of ejector in table 85 mm︱ram surface 1040 x 800 mm︱ram adjustment 120 mm︱Capacity of ejector in ram 12 t︱ejector stroke in ram 80 mm︱power requirement 36,0 - 112,6 kW︱weight 65,0 t︱Dimensions (WxDxH) 3,0 x 3,1 x 6,07 m︱
          Sinter-metal calibrating press with DC motor, flywheel with planetary gear, toggle / knuckle-joint system, hydraulic clutch/brake combination, electronic overload protection, motorised tool holder adjustment, pneumatic counterbalance cylinder in press frame, hydraulic ejector in table, hydraulic ejector in tool holder can only be offered without putting into operation in our warehouse - video at seller's site before dismantling available
            pressure 800 t
            distance between columns 1050 mm
            stroke 200 mm
            no. of strokes 8 - 25 /min
            distance table/ram, max. stroke . 1300 mm
            Side window 550 mm
            table surface area 1030 x 900 mm
            Capacity of ejector in table 15 t
            Stroke of ejector in table 85 mm
            ram surface 1040 x 800 mm
            ram adjustment 120 mm
            Capacity of ejector in ram 12 t
            ejector stroke in ram 80 mm
            power requirement 36,0 - 112,6 kW
            weight 65,0 t
            Dimensions (WxDxH) 3,0 x 3,1 x 6,07 m
            Description :
            Sinter-metal calibrating press
            with DC motor, flywheel with planetary gear, toggle / knuckle-joint system, hydraulic clutch/brake combination, electronic overload protection, motorised tool holder adjustment, pneumatic counterbalance cylinder in press frame, hydraulic ejector in table, hydraulic ejector in tool holder
            can only be offered without putting into operation in our warehouse - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column LIEBERGELD multi-station press G 400/1100/250/5


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-153070A · Toggle Press - Single Column

          LIEBERGELD multi-station press - G 400/1100/250/5 - - 1988 - Siemens S 5

          Technical details
          pressure 400 t︱distance between columns 1100 mm︱stroke 250 mm︱no. of strokes 25 - 75 /min︱distance table/ram, max. stroke up, adjustment up 900 mm︱table surface area 1100 x 965 mm︱capacity of ejector in table 30 t︱ejector stroke of ejector in table 80 mm︱capacity of ejector in ram 3 t︱stroke of ejector in ram 60 / 70 mm︱ram surface 980 x 800 mm︱column travel -side 800 mm︱ram adjustment 20 mm︱power capacity 80,0 + 5,5 kW︱weight 47,0 t︱Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m︱weight of switch cabinet 1,4 t︱dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m︱
          Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 400 t
            distance between columns 1100 mm
            stroke 250 mm
            no. of strokes 25 - 75 /min
            distance table/ram, max. stroke . 900 mm
            table surface area 1100 x 965 mm
            capacity of ejector in table 30 t
            ejector stroke of ejector in tab. 80 mm
            capacity of ejector in ram 3 t
            stroke of ejector in ram 60 / 70 mm
            ram surface 980 x 800 mm
            column travel -side 800 mm
            ram adjustment 20 mm
            power capacity 80,0 + 5,5 kW
            weight 47,0 t
            Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m
            weight of switch cabinet 1,4 t
            dimensions of electrical cabinet. 4,9 x 0,5 x 2,6 m
            Description :
            Multi-station cold extrusion press with link drive
            with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus),
            hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column MAY MKNF 100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223006 · Toggle Press - Single Column

          MAY - MKNF 100 - - 1978 - konventionell

          Technical details
          pressure 100 t︱stroke 60 mm︱no. of strokes 60 /min︱throat 150 mm︱passage to the back 245 mm︱dayligth 320 mm︱table surface area 580 x 400 mm︱hole in the table 100 mm︱table height over floor 900 mm︱ram surface 300 mm︱power requirement 4,0 kW︱weight of the machine ca. t︱required space 1,1 x 1,4 x 2,0 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch can be offered with or without putting into operation
            pressure 100 t
            stroke 60 mm
            no. of strokes 60 /min
            throat 150 mm
            passage to the back 245 mm
            dayligth 320 mm
            table surface area 580 x 400 mm
            hole in the table 100 mm
            table height over floor 900 mm
            ram surface 300 mm
            power requirement 4,0 kW
            required space 1,1 x 1,4 x 2,0 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with motor, pneumatic clutch
            can be offered with or without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column MAY MKN 1-30/5


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173043 · Toggle Press - Single Column

          MAY - MKN 1-30/5 - - 1977 - konventionell

          Technical details
          pressure 30 t︱throat 110 mm︱stroke 50 mm︱no. of strokes 35 - 80 /min︱passage to the back 170 mm︱dayligth 230 mm︱table surface area 410 x 260 mm︱table height over floor 790 mm︱ram surface 190 mm︱ram adjustment 35 mm︱power requirement 1,0 x 1,1 x 1,8 kW︱Weight 1,3 t︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available
            pressure 30 t
            throat 110 mm
            stroke 50 mm
            no. of strokes 35 - 80 /min
            passage to the back 170 mm
            dayligth 230 mm
            table surface area 410 x 260 mm
            table height over floor 790 mm
            ram surface 190 mm
            ram adjustment 35 mm
            power requirement 1,0 x 1,1 x 1,8 kW
            Weight 1,3 t
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            can be offered without or with putting into operation in given condition - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID HK 500


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69500 · Toggle Press - Single Column

          BERG & SCHMID - HK 500 - - - neu - -

          Technical details
          pressure 500 kN︱stroke 40 mm︱throat 73 mm︱Working height from to 60 - 150 mm︱table surface area 115 x 70 mm︱weight of the machine ca. 10 Kg︱
          .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring
            pressure 500 kN
            stroke 40 mm
            throat 73 mm
            Working height from t. 60 - 150 mm
            table surface area 115 x 70 mm
            weight of the machine ca. 10 Kg
            Description :
            .Toggle lever hand press SPECIAL OFFER!!!
            • Working height adjustable by simply loosening the clamping screws on the stand
            • Working height fine adjustment for HK 800 = adjustment of the
            press head to the desired working height. The fine adjustment takes place
            forced in both directions via a threaded spindle
            • Hand lever arranged in a user-friendly manner, return via spring


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID PNK 3400


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69511 · Toggle Press - Single Column

          BERG & SCHMID - PNK 3400 - - - neu - -

          Technical details
          pressure 34,0 kN︱stroke 40 mm︱throat 130 mm︱Working height from to 80 - 240 mm︱table surface area 190 x 140 mm︱spindle diameter 30 mm︱weight of the machine ca. 80 Kg︱dimensions 375 x 200 mm︱
          Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.
            pressure 34,0 kN
            stroke 40 mm
            throat 130 mm
            Working height from t. 80 - 240 mm
            table surface area 190 x 140 mm
            spindle diameter 30 mm
            weight of the machine ca. 80 Kg
            dimensions 375 x 200 mm
            Description :
            Toggle pneumatic presses
            incl. working height fine adjustment via bevel gear with lateral crank
            comfortable and easily adjustable.
            Toggle lever pneumatic presses are to be used when the maximum
            pressure is required shortly before the end of the stroke, e.g. when
            assembling, punching,
            embossing, caulking, etc.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID HK 2600


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69503 · Toggle Press - Single Column

          BERG & SCHMID - HK 2600 - - - neu - -

          Technical details
          pressure 26,0 kN︱stroke 60 mm︱throat 110 mm︱Working height from to 70 - 250 mm︱table surface area 190 x 140 mm︱spindle diameter 30 mm︱weight of the machine ca. 46 Kg︱dimensions 310 x 140 x 475 mm︱
          Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column
            pressure 26,0 kN
            stroke 60 mm
            throat 110 mm
            Working height from t. 70 - 250 mm
            table surface area 190 x 140 mm
            spindle diameter 30 mm
            weight of the machine ca. 46 Kg
            dimensions 310 x 140 x 475 mm
            Description :
            Knee lever hand presses SPECIAL PRICE!!!
            HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with
            comfortable and easy to adjust with a side crank.
            Stand height 475 mm
            Even more pressure in production without additional effort.
            Maximum pressure performance shortly before the end of the stroke thanks to
            toggle lever technology.
            Particularly stable construction of the spindle head and column


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID HK 800


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69501 · Toggle Press - Single Column

          BERG & SCHMID - HK 800 - - - neu - -

          Technical details
          pressure 8,0 kN︱stroke 40 mm︱throat 90 mm︱Working height from to 50 - 200 mm︱table surface area 120 x 160 mm︱weight of the machine ca. 22 Kg︱dimensions 160 x 230 x410 mm︱
          Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring
            pressure 8,0 kN
            stroke 40 mm
            throat 90 mm
            Working height from t. 50 - 200 mm
            table surface area 120 x 160 mm
            weight of the machine ca. 22 Kg
            dimensions 160 x 230 x410 mm
            Description :
            Knee lever hand press with fine height adjustment SPECIAL PRICE!!!
            • Working height adjustable by simply loosening the clamping screws on the stand
            • Working height fine adjustment for HK 800 = adjustment of the
            press head to the desired working height. The fine adjustment takes place
            forced in both directions via a threaded spindle
            • Hand lever arranged in a user-friendly manner, return via spring


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID PNK 1700


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69510 · Toggle Press - Single Column

          BERG & SCHMID - PNK 1700 - - - neu - -

          Technical details
          pressure 17,0 kN︱stroke 40 mm︱throat 110 mm︱Working height from to 70 - 220 mm︱table surface area 190 x 140 mm︱spindle diameter 30 mm︱weight of the machine ca. 60 Kg︱dimensions 310 x 190 mm︱
          Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.
            pressure 17,0 kN
            stroke 40 mm
            throat 110 mm
            Working height from t. 70 - 220 mm
            table surface area 190 x 140 mm
            spindle diameter 30 mm
            weight of the machine ca. 60 Kg
            dimensions 310 x 190 mm
            Description :
            Toggle pneumatic presses
            incl. working height fine adjustment via bevel gear with lateral crank
            comfortable and easily adjustable.
            Toggle lever pneumatic presses are to be used when the maximum
            pressure is required shortly before the end of the stroke, e.g. when
            assembling, punching,
            embossing, caulking, etc.


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Toggle Press - Single Column BERG & SCHMID HK 1700


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-69502 · Toggle Press - Single Column

          BERG & SCHMID - HK 1700 - - - neu - -

          Technical details
          pressure 17,0 kN︱stroke 60 mm︱throat 105 mm︱Working height from to 75 -180 mm︱table surface area 170 x 130 mm︱spindle diameter 25 mm︱weight of the machine ca. 35 Kg︱dimensions 260 x 130 x415 mm︱
          Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column
            pressure 17,0 kN
            stroke 60 mm
            throat 105 mm
            Working height from t. 75 -180 mm
            table surface area 170 x 130 mm
            spindle diameter 25 mm
            weight of the machine ca. 35 Kg
            dimensions 260 x 130 x415 mm
            Description :
            Knee lever hand presses SPECIAL PRICE!!!
            HK 1700 stroke 60 mm with crank with fine adjustment of working height
            Stand height 450 mm
            Even more pressure in production without additional effort.
            Maximum pressure performance shortly before the end of the stroke thanks to
            toggle lever technology.
            Particularly stable construction of the spindle head and column



        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          BERG & SCHMID - MAY - REKORD -