,
Red europea de distribuidores de maquinaria de almacenamiento.
+49 (0) 2389 5299080
Servicio de busqueda Vender maquinas usadas

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:
             Vista 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2023

          1. machine-categorie:
          2. Metal Processing
          3. Boring mills - Machining Centers - Drilling machines
          4. Machining Center - Horizontal

          Machining Center - Horizontal

          Machinelist: Machining Center - Horizontal

          Machining Center - Horizontal

          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DMG MORI NHX 6300

          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland
          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2022050 · Machining Center - Horizontal

          DMG MORI - NHX 6300 - - 2021 - Siemens S840D sl

          Technical details
          x-travel 1050 mm︱y-travel 900 mm︱z-travel 1030 mm︱Control Siemens S840D sl ︱main spindle: ︱number of spindles 1 Stück︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 90/50 kW︱table: ︱no. of tables 2 ︱table surface area 630 x 630 mm︱max. workpiece dimensions Durchm. 1050 x H 1300 ︱max. workpiece weight 1500 kg︱tool magazin: ︱number of tool places 60 Pos.︱tool taper HSK100A ︱feeds: ︱rapid traverse ( x / y / z ) 60/60/60 m/min︱Acceleration (x/y/z) 0,64/0,93/0,70 G︱Number of working hours ca. 3260 h︱
          In our opinion, the machine is in a new condition condition and can be inspected under power by appointment. Commissioning: December 2020 / January 2021 The machine will be available from around June 2023, or earlier by arrangement. Technical features: - IKZ - Closed control loop with integrated position measuring system - Celos with Siemens, ERGOline Control - Simultaneous 4-axis machining - Workpiece / fixture measurement (Fanuc) - Tool breakage control system in the tool magazine Accesories: - chip conveyor - Probe, Renishaw OMP 60 Miscellaneous: - Minimum pallet indexing angle 0.001 degrees - A 3D data model software for programming systems can also be purchased will ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 1050 mm
            y-travel 900 mm
            z-travel 1030 mm
            Control Siemens S840D sl
            number of spindles 1 Stück
            max. turning speeds 12.000 min/-1
            drive capacity - main spindle 90/50 kW
            no. of tables 2
            table surface area 630 x 630 mm
            max. workpiece dimensions Durchm. 1050 x H 1300
            max. workpiece weight 1500 kg
            number of tool places 60 Pos.
            tool taper HSK100A
            rapid traverse ( x / y / z ) 60/60/60 m/min
            Acceleration (x/y/z) 0,64/0,93/0,70 G
            Number of working hours ca. 3260 h
            Description :
            In our opinion, the machine is in a new condition
            condition and can be inspected under power by appointment.

            Commissioning: December 2020 / January 2021
            The machine will be available from around June 2023, or earlier by arrangement.

            Technical features:
            - IKZ
            - Closed control loop with integrated position measuring system
            - Celos with Siemens, ERGOline Control
            - Simultaneous 4-axis machining
            - Workpiece / fixture measurement (Fanuc)
            - Tool breakage control system in the tool magazine

            Accesories:
            - chip conveyor
            - Probe, Renishaw OMP 60

            Miscellaneous:
            - Minimum pallet indexing angle 0.001 degrees
            - A 3D data model software for programming systems can also be purchased
            will

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal Krauseco-Mauser PS MC

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03583 · Machining Center - Horizontal

          Krauseco-Mauser - PS MC - - 2017 - Siemens

          Technical details
          x-travel 700 mm︱y-travel 700 mm︱z-travel 700 mm︱Control Siemens ︱type 840Dsl ︱Number of spindles 2 St.︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Doppelwendespanner Maschinennummer 0552.80.00 About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            x-travel 700 mm
            y-travel 700 mm
            z-travel 700 mm
            Control Siemens
            type 840Dsl
            Number of spindles 2 St.
            Description :
            Doppelwendespanner

            Maschinennummer 0552.80.00

            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal Quaser HX 404 BP/15C

          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen
          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-44011 · Machining Center - Horizontal

          Quaser - HX 404 BP/15C - - 2016 - FANUC 31 iB

          Technical details
          x-travel 560 mm︱y-travel 640 mm︱z-travel 640 mm︱control FANUC 31 iB ︱size of pallet 400 x 400 mm︱Number of pallets 2 ︱b-axis 360.000 x 0,001 ° °︱table load 0,4 t︱speeds: 15000 U/min︱power capacity - milling spindle 26 kW︱rapid speed 60 m/min︱no. of tools in the magazine 60 Stück︱tool taper BT 40 BBT 40 Plus︱dimensions 4,1 x 2,3 x 2,72 m︱weight of the machine ca. 11 t︱
          Nice horizontal machining centre with full 4th axis - internal coolant 25 bar - external electric hand wheel - 1x chip conveyor - 2x internal chip conveyor - 3D Renishaw OMP 60 - spindle oil cooler - full 4th axis - filter system - 1x extra pallet
            x-travel 560 mm
            y-travel 640 mm
            z-travel 640 mm
            control FANUC 31 iB
            size of pallet 400 x 400 mm
            Number of pallets 2
            b-axis 360.000 x 0,001 ° °
            table load 0,4 t
            speeds: 15000 U/min
            power capacity - milling spindle 26 kW
            rapid speed 60 m/min
            no. of tools in the magazine 60 Stück
            tool taper BT 40 BBT 40 Plus
            dimensions 4,1 x 2,3 x 2,72 m
            weight of the machine ca. 11 t
            Description :
            Nice horizontal machining centre with full 4th axis

            - internal coolant 25 bar
            - external electric hand wheel
            - 1x chip conveyor
            - 2x internal chip conveyor
            - 3D Renishaw OMP 60
            - spindle oil cooler
            - full 4th axis
            - filter system
            - 1x extra pallet


        • Klaus Rosenboom GmbH
        • Oppenheimer Str. 19
        • 28307 Bremen

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DOOSAN DAEWOO HM 1250

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19944 · Machining Center - Horizontal

          DOOSAN DAEWOO - HM 1250 - - 2013 - Fanuc 31i-MB

          Technical details
          x-travel 2100 mm︱y-travel 1500 mm︱z-travel 1500 mm︱Number of pallets 2 ︱size of pallet 1250 x 1250 mm︱dimension of workpiece 2000 x 1425 (H) mm︱feeds 0,1 - 12000 mm/min︱rapid traverse 24000 mm/min︱spindle motor 26/22 kW︱spindle turning speed range 10 - 6000 U/min︱Tool magazine positions 60 fach︱tool taper ISO 50 ︱control Fanuc 31i-MB ︱workpiece weight 3000 kg︱total power requirement 69 KVA︱total wight 31 t︱dimensions of the machine ca. 10,5 x 5,8 x 4,1 m︱
          Equipment : - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B) - 2- pallets 1250 mm - internal spindle cooling, oil cooler - IKZ 20bar - tool changer 90-fold (BT 50) - chip conveyor - ball screw cooling - Glass scales Heidenhain - CE sign approx. 27000h Power On Hours, 12400h Cutting Time
            x-travel 2100 mm
            y-travel 1500 mm
            z-travel 1500 mm
            Number of pallets 2
            size of pallet 1250 x 1250 mm
            dimension of workpiece 2000 x 1425 (H) mm
            feeds 0,1 - 12000 mm/min
            rapid traverse 24000 mm/min
            spindle motor 26/22 kW
            spindle turning speed range 10 - 6000 U/min
            Tool magazine positions 60 fach
            tool taper ISO 50
            control Fanuc 31i-MB
            workpiece weight 3000 kg
            total power requirement 69 KVA
            total wight 31 t
            dimensions of the machine ca. 10,5 x 5,8 x 4,1 m
            Description :
            Equipment :
            - CNC control FANUC 31i-MA 4-axis (X,Y,Z,B)
            - 2- pallets 1250 mm
            - internal spindle cooling, oil cooler
            - IKZ 20bar
            - tool changer 90-fold (BT 50)
            - chip conveyor
            - ball screw cooling
            - Glass scales Heidenhain
            - CE sign

            approx. 27000h Power On Hours, 12400h Cutting Time


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DMG MORI NHX 5000

          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland
          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9105 · Machining Center - Horizontal

          DMG MORI - NHX 5000 - - 2011 - M 730 BM MAPPS IV

          Technical details
          x-travel 730 mm︱y-travel 730 mm︱z-travel 880 mm︱control M 730 BM MAPPS IV︱Main spindle: ︱max. spindle speed 12.000 min/-1︱power capacity - milling spindle 15 / 11 kW︱max. Torque 102 Nm︱tool taper ISO 40 ︱distance spindle center to table 80 - 800 mm︱distance Spindlenose and center of table 70 - 950 mm︱pallet changer: ︱numbers of pallets 2 ︱size of pallet 500 x 500 mm︱max. workpiece weight 500 kg︱max. workpiecediameter 800 mm︱max. workpiece height 1.100 mm︱change time of pallets 9,5 sec︱Indexing-time 1,49 sec︱B-axis (table) 1 °︱
          CNC - MachiningCenter Horizontal DMG MORI - NHX 5000 - 2 pos. palletchanger - WITHOUT tools
            x-travel 730 mm
            y-travel 730 mm
            z-travel 880 mm
            control M 730 BM MAPPS IV
            max. spindle speed 12.000 min/-1
            power capacity - milling spindle 15 / 11 kW
            max. Torque 102 Nm
            tool taper ISO 40
            distance spindle center to table 80 - 800 mm
            distance Spindlenose and center . 70 - 950 mm
            numbers of pallets 2
            size of pallet 500 x 500 mm
            max. workpiece weight 500 kg
            max. workpiecediameter 800 mm
            max. workpiece height 1.100 mm
            change time of pallets 9,5 sec
            Indexing-time 1,49 sec
            B-axis (table) 1 °
            Description :
            CNC - MachiningCenter Horizontal
            DMG MORI - NHX 5000

            - 2 pos. palletchanger
            - WITHOUT tools




        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MITSUI SEIKI HU 63 A - 5X

          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland
          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-9103 · Machining Center - Horizontal

          MITSUI SEIKI - HU 63 A - 5X - - 2009 - 31iM-A5 Fanuc

          Technical details
          x-travel 900 mm︱y-travel 900 mm︱z-travel 900 mm︱control 31iM-A5 Fanuc︱Main spindle: ︱turning speed range - main spindle 120 - 12.000 min/-1︱power capacity - main spindel 30 / 25 kW︱Torque 420 Nm︱tool taper SK 50 ︱pallet changer: ︱numbers of pallets 2 ︱size of pallet 630 x 630 mm︱Tool-Presetter: ︱number of toolpositions 120 pos.︱feeds: ︱rapid traverse X: 12 m/min︱rapid traverse Y/Z: 24 m/min︱rapid traverse B: 3.600 º/min︱rapid traverse A: 2.160 º/min︱feed speeds X/Y/Z: 0,1 - 10.000 mm/min︱
          Machining Center Horizontal MITSUI SEIKI - HU 63 A - 5X - 5 Axis - incl. 4x pallets and 1x clamping tower - incl. podium
            x-travel 900 mm
            y-travel 900 mm
            z-travel 900 mm
            control 31iM-A5 Fanuc
            turning speed range - main spind. 120 - 12.000 min/-1
            power capacity - main spindel 30 / 25 kW
            Torque 420 Nm
            tool taper SK 50
            numbers of pallets 2
            size of pallet 630 x 630 mm
            number of toolpositions 120 pos.
            rapid traverse X: 12 m/min
            rapid traverse Y/Z: 24 m/min
            rapid traverse B: 3.600 º/min
            rapid traverse A: 2.160 º/min
            feed speeds X/Y/Z: 0,1 - 10.000 mm/min
            Description :
            Machining Center Horizontal
            MITSUI SEIKI - HU 63 A - 5X

            - 5 Axis
            - incl. 4x pallets and 1x clamping tower
            - incl. podium


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal STARRAG HECKERT HEC 500 H/V Athletic

          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland
          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03214 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 500 H/V Athletic - - 2008 - Siemens 840D

          Technical details
          x-travel 900 mm︱y-travel 770 mm︱z-travel 1000 mm︱Control Siemens 840D ︱tool taper SK 50 ︱spindle turning speed range 20 - 6000 U/min︱power capacity at 60% load 30 kW︱max. torque on the spindle at 60% load 1080 Nm︱rapid travel x/y/z 60 m/min︱interference diameter 1150 mm︱weight of the machine ca. 21 t︱
          Equipment / Accessories: - horizontal/vertical head - NC rotary table 360° - 2 times pallet changer 630 x 500 mm - max. load per pallet (centered) 1000 kg - tool magazine with 60 places - max. tool diameter with free adjacent places 325 mm - max. tool diameter with occupied adjacent places 125 mm - max. tool length 700 mm - max. tool weight 35 kg - electronic hand control panel - coolant device with paper band filter - internal coolant supply 80 bar - oil coolant - chip conveyor
            x-travel 900 mm
            y-travel 770 mm
            z-travel 1000 mm
            Control Siemens 840D
            tool taper SK 50
            spindle turning speed range 20 - 6000 U/min
            power capacity at 60% load 30 kW
            max. torque on the spindle at 60. 1080 Nm
            rapid travel x/y/z 60 m/min
            interference diameter 1150 mm
            weight of the machine ca. 21 t
            Description :
            Equipment / Accessories:
            - horizontal/vertical head
            - NC rotary table 360°
            - 2 times pallet changer 630 x 500 mm
            - max. load per pallet (centered) 1000 kg
            - tool magazine with 60 places
            - max. tool diameter with free adjacent places 325 mm
            - max. tool diameter with occupied adjacent places 125 mm
            - max. tool length 700 mm
            - max. tool weight 35 kg
            - electronic hand control panel
            - coolant device with paper band filter
            - internal coolant supply 80 bar
            - oil coolant
            - chip conveyor


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal STARRAG HECKERT HEC 800

          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland
          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03256 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 800 - - 2008 - Siemens 840D

          Technical details
          x-travel 1450 mm︱y-travel 1100 mm︱z-travel 1300 mm︱Control Siemens 840D ︱tool taper HSK 100 ︱spindle turning speed range 20-6000 U/min︱rapid travel x/y/z 60 m/min︱weight of the machine ca. 31 t︱
          Equipment / Accessories: - horizontal/vertical head - NC rotary table 360° - 2 times pallet changer 630 x 500 mm - max. load per pallet (centered) 1000 kg - tool magazine with 60 places - max. tool diameter with free adjacent places 325 mm - max. tool diameter with occupied adjacent places 125 mm - max. tool length 700 mm - max. tool weight 35 kg - electronic hand control panel - coolant device with paper band filter - internal coolant supply 80 bar - oil coolant - chip conveyor
            x-travel 1450 mm
            y-travel 1100 mm
            z-travel 1300 mm
            Control Siemens 840D
            tool taper HSK 100
            spindle turning speed range 20-6000 U/min
            rapid travel x/y/z 60 m/min
            weight of the machine ca. 31 t
            Description :
            Equipment / Accessories:
            - horizontal/vertical head
            - NC rotary table 360°
            - 2 times pallet changer 630 x 500 mm
            - max. load per pallet (centered) 1000 kg
            - tool magazine with 60 places
            - max. tool diameter with free adjacent places 325 mm
            - max. tool diameter with occupied adjacent places 125 mm
            - max. tool length 700 mm
            - max. tool weight 35 kg
            - electronic hand control panel
            - coolant device with paper band filter
            - internal coolant supply 80 bar
            - oil coolant
            - chip conveyor


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MCM ACTION 2600 FFS

          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland
          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05884 · Machining Center - Horizontal

          MCM - ACTION 2600 FFS - - 2008 - Fanuc 16 MB

          Technical details
          x-travel 2600 mm︱y-travel 1600 mm︱z-travel 1700 mm︱Control Fanuc 16 MB ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 42 x 18 m︱
          The system requires a space of approx. 42 x 18 m It is designed for "fully automatic operation" in 3 shifts. Components with tolerances of <0.01 mm were produced on the system. Equipment: CNC control Fanuc 16 MB 20-pos pallet changer Pallet size 1250 x 1000 mm Interference circle diameter up to 2700 mm Vertical tool magazine with 599 places HSK-A100 from 3 modules on 4 levels Rotary table (B-axis) with 3,600,000 angular positions Table load 4000 kg Spindle speeds 8,000 rpm. Motor power 26/37 kW Torque 605/707 Nm Chip disposal through two jet pipes in the existing central Chip disposal system Connection to an in-house central coolant system. IKZ spindle with supply of coolant through the center of the tool Cooling unit for working spindle use Electrical control cabinet with air conditioning Protective cover for the work area Protective fence cladding, sheet metal below and safety glass above, for the entire working area of ??the machine. Buffer shelf with 5 tool spaces for quick tool provision Tool cone cleaning High pressure coolant supply 65 bar Laser control of tool availability Inductive button for temperature compensation on the electrospindle Tool Monitor Renishaw button type RMP 60 Rotoclear AR aspirator Machine preparation for hydraulic clamping (on the turntable) Automation of the plant
            x-travel 2600 mm
            y-travel 1600 mm
            z-travel 1700 mm
            Control Fanuc 16 MB
            dimensions of the machine ca. 42 x 18 m
            Description :
            The system requires a space of approx. 42 x 18 m
            It is designed for "fully automatic operation" in 3 shifts.
            Components with tolerances of <0.01 mm were produced on the system.

            Equipment:
            CNC control Fanuc 16 MB
            20-pos pallet changer
            Pallet size 1250 x 1000 mm
            Interference circle diameter up to 2700 mm
            Vertical tool magazine with 599 places HSK-A100
            from 3 modules on 4 levels
            Rotary table (B-axis) with 3,600,000 angular positions
            Table load 4000 kg
            Spindle speeds 8,000 rpm.
            Motor power 26/37 kW
            Torque 605/707 Nm
            Chip disposal through two jet pipes in the existing central
            Chip disposal system
            Connection to an in-house central coolant system.
            IKZ spindle with supply of coolant through the center of the tool
            Cooling unit for working spindle use
            Electrical control cabinet with air conditioning
            Protective cover for the work area
            Protective fence cladding, sheet metal below and safety glass above,
            for the entire working area of ??the machine.
            Buffer shelf with 5 tool spaces for quick tool provision
            Tool cone cleaning
            High pressure coolant supply 65 bar
            Laser control of tool availability
            Inductive button for temperature compensation on the electrospindle
            Tool Monitor
            Renishaw button type RMP 60
            Rotoclear
            AR aspirator
            Machine preparation for hydraulic clamping (on the turntable)
            Automation of the plant


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MORI SEIKI NH 4000 DCG

          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich
          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03770 · Machining Center - Horizontal

          MORI SEIKI - NH 4000 DCG - - 2007 - MSX 701 III

          Technical details
          x-travel 560 mm︱y-travel 560 mm︱z-travel 630 mm︱control MSX 701 III ︱power capacity - milling spindle 22 / 18,5 kW︱spindle turning speed - stepless 14.000 1/min︱numbers of tools in magazin 60 BT 40 ︱size of pallet 400 x 400 mm︱max. workpiece diameter on pallets 580 mm︱workpiece height max. 650 mm︱B-axis (table) 1 ° ︱feeds x/y/z -stepless 20.000 mm/min︱rapid travel x/y/z 50.000 mm/min︱total power requirement 54 kVA︱weight of the machine ca. 9.9 t︱dimensions of the machine ca. 2,9 x 3,9 x 2,6 m︱Chip conveyor ︱
          BRAND NEW SPINDEL IN 2022 2- pallet 400 X 400 360° POSITION machining center with 50 bar coolant through spindle.
            x-travel 560 mm
            y-travel 560 mm
            z-travel 630 mm
            control MSX 701 III
            power capacity - milling spindle 22 / 18,5 kW
            spindle turning speed - stepless 14.000 1/min
            numbers of tools in magazin 60 BT 40
            size of pallet 400 x 400 mm
            max. workpiece diameter on palle. 580 mm
            workpiece height max. 650 mm
            B-axis (table) 1 °
            feeds x/y/z -stepless 20.000 mm/min
            rapid travel x/y/z 50.000 mm/min
            total power requirement 54 kVA
            weight of the machine ca. 9.9 t
            dimensions of the machine ca. 2,9 x 3,9 x 2,6 m
            Description :
            BRAND NEW SPINDEL IN 2022
            2- pallet 400 X 400 360° POSITION
            machining center with 50 bar coolant through spindle.


        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal BURKHARDT + WEBER MCR 120/80

          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland
          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03258 · Machining Center - Horizontal

          BURKHARDT + WEBER - MCR 120/80 - - 2007 - Siemens 840D

          Technical details
          x-travel 1600 mm︱y-travel 1250 mm︱z-travel 1800 mm︱Control Siemens 840D ︱b-axis 36000 x 0,001 °︱spindle speed max. 6000 U/min︱drive capacity 60 kW︱tool taper HSK 100-A ︱length in total 350 mm︱diameter 150 mm︱max. boring power axial 37 kW︱max. milling power radial / at tool length 10 kW / 150 mm︱max. tool weight 30 kg︱tool clamping power 40 kN︱total power requirement 100 kW︱dimensions of the machine ca. 9,2 x 8,8 x 6,3 m︱
          This machine is sold together with: - another identical machine type MCR 120/80, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCX 900, year 2007 (our stock no. 03253), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 208 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 750 mm - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm - max. pallet load: 3000 kg - TDS Tool Data Sheet BALLUF - measuring probe RENISHAW OMP 60, Taststift 50 mm - remote diagnosis via modem - coolant system KNOLL: - low pressure 200 l/min, 4 bar - high-pressure: 200 l/min, 30 bar (ejector boring); 80 l/min, 70 bar
            x-travel 1600 mm
            y-travel 1250 mm
            z-travel 1800 mm
            Control Siemens 840D
            b-axis 36000 x 0,001 °
            spindle speed max. 6000 U/min
            drive capacity 60 kW
            tool taper HSK 100-A
            length in total 350 mm
            diameter 150 mm
            max. boring power axial 37 kW
            max. milling power radial / at t. 10 kW / 150 mm
            max. tool weight 30 kg
            tool clamping power 40 kN
            total power requirement 100 kW
            dimensions of the machine ca. 9,2 x 8,8 x 6,3 m
            Description :
            This machine is sold together with:
            - another identical machine type MCR 120/80, year 2007,
            - two further horizontal machining centres, Burkhardt+Weber, type MCX 900,
            year 2007 (our stock no. 03253),
            - and a Fastems rack system.
            All four machines are connected to this Fastems system.

            Equipment / Accessories:
            - tool changer with rack magazine, 208 places
            - max. tool-Ø: bar tool Ø 750 mm
            - mechanical borer breakage control upto 750 mm
            - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm
            - max. pallet load: 3000 kg
            - TDS Tool Data Sheet BALLUF
            - measuring probe RENISHAW OMP 60, Taststift 50 mm
            - remote diagnosis via modem
            - coolant system KNOLL:
            - low pressure 200 l/min, 4 bar
            - high-pressure: 200 l/min, 30 bar (ejector boring); 80 l/min, 70 bar


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal BURKHARDT + WEBER MCX 900

          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland
          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03253 · Machining Center - Horizontal

          BURKHARDT + WEBER - MCX 900 - - 2007 - Siemens 840D

          Technical details
          x-travel 1600 mm︱y-travel 1400 mm︱z-travel 1500 mm︱Control Siemens 840D ︱b-axis 360000 x 0,001 °︱spindle speed max. 6000 U/min︱drive capacity 37 kW︱tool taper HSK 100-A ︱length in total 350 / 1200 mm︱diameter 150 mm︱max. boring power axial 37 kW︱max. milling power radial / at tool length 10 kW / 150 mm︱max. tool weight 30 / 60 kg︱tool clamping power 40 kN︱total power requirement 80 kW︱dimensions of the machine ca. 9,6 x 8,5 x 5,5 m︱
          This machine is sold together with: - another identical machine type MCX 900, year 2007, - two further horizontal machining centres, Burkhardt+Weber, type MCR 120/80, year 2007 (our stock no. 03258), - and a Fastems rack system. All four machines are connected to this Fastems system. Equipment / Accessories: - tool changer with rack magazine, 298 places - max. tool-Ø: bar tool Ø 750 mm - mechanical borer breakage control upto 1200 mm - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm - max. pallet load: 3000 kg - TDS Tool Data Sheet BALLUF - measuring probe RENISHAW OMP 60, Taststift 50 mm - remote diagnosis via modem - coolant system KNOLL: - low pressure 200 l/min, 4 bar - high-pressure: 200 l/min, 30 bar (ejector boring); 20 l/min, 70 bar
            x-travel 1600 mm
            y-travel 1400 mm
            z-travel 1500 mm
            Control Siemens 840D
            b-axis 360000 x 0,001 °
            spindle speed max. 6000 U/min
            drive capacity 37 kW
            tool taper HSK 100-A
            length in total 350 / 1200 mm
            diameter 150 mm
            max. boring power axial 37 kW
            max. milling power radial / at t. 10 kW / 150 mm
            max. tool weight 30 / 60 kg
            tool clamping power 40 kN
            total power requirement 80 kW
            dimensions of the machine ca. 9,6 x 8,5 x 5,5 m
            Description :
            This machine is sold together with:
            - another identical machine type MCX 900, year 2007,
            - two further horizontal machining centres, Burkhardt+Weber, type MCR 120/80,
            year 2007 (our stock no. 03258),
            - and a Fastems rack system.
            All four machines are connected to this Fastems system.

            Equipment / Accessories:
            - tool changer with rack magazine, 298 places
            - max. tool-Ø: bar tool Ø 750 mm
            - mechanical borer breakage control upto 1200 mm
            - pallet changer 2-fold with 2 pallets, pallet size 1000 x 800 mm
            - max. pallet load: 3000 kg
            - TDS Tool Data Sheet BALLUF
            - measuring probe RENISHAW OMP 60, Taststift 50 mm
            - remote diagnosis via modem
            - coolant system KNOLL:
            - low pressure 200 l/min, 4 bar
            - high-pressure: 200 l/min, 30 bar (ejector boring); 20 l/min, 70 bar


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal GROB G300

          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland
          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023032 · Machining Center - Horizontal

          GROB - G300 - - 2007 - Siemens 840D

          Technical details
          x-travel 350 mm︱y-travel 720 mm︱z-travel 595 mm︱Control Siemens 840D ︱main spindle: ︱number of spindles 2 Stück︱max. turning speeds 15000 min/-1︱tool magazin: ︱tool taper HSK 63 A ︱
          In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 350 mm
            y-travel 720 mm
            z-travel 595 mm
            Control Siemens 840D
            number of spindles 2 Stück
            max. turning speeds 15000 min/-1
            tool taper HSK 63 A
            Description :
            In our opinion, the machine is in good condition
            and can be inspected under power by appointment.

            There are 2 identical machines available.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAZAK HC Nexus 5000-II

          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande
          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2760 · Machining Center - Horizontal

          MAZAK - HC Nexus 5000-II - - 2007 - Mazatrol Matrix

          Technical details
          Control Mazatrol Matrix ︱Pallet table size 500 x 500 mm︱Number of pallets 2 x︱Table load 700 kg︱Movement X-axis 730 mm︱Movement Y-axis 730 mm︱Movement Z-axis 740 mm︱Table indexing 0,001 °︱Spindle taper DIN 69871A-40 ︱Spindle Speed 18.000 1/min︱Spindle motor 35/26 kW︱Magazin capacity 80 ︱Required floor space mm︱Length 5985 mm︱Width 3056 mm︱Height 2813 mm︱Weight 11000 kg︱
            Control Mazatrol Matrix
            Pallet table size 500 x 500 mm
            Number of pallets 2 x
            Table load 700 kg
            Movement X-axis 730 mm
            Movement Y-axis 730 mm
            Movement Z-axis 740 mm
            Table indexing 0,001 °
            Spindle taper DIN 69871A-40
            Spindle Speed 18.000 1/min
            Spindle motor 35/26 kW
            Magazin capacity 80
            Length 5985 mm
            Width 3056 mm
            Height 2813 mm
            Weight 11000 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal DOOSAN H 100

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20105 · Machining Center - Horizontal

          DOOSAN - H 100 - - 2007 - FANUC 18 I MB

          Technical details
          x-travel 2000 mm︱y-travel 1120 mm︱z-travel 1000 mm︱control FANUC 18 I MB ︱numbers of pallets 2 ︱pallet size: 1000 x 1000 mm︱max. workpiece weight 2000 kg︱Spindle RPM 6000 1/min︱spindle drive 22/26 kW︱max. torque on the spindle ︱toolpiece magazine: chain magazine 60 Stück︱rapid travel x/y/z 12 m/min︱distance spindle /table 75 - 1195 mm︱total power requirement 68,46 kVA︱weight of the machine ca. 27 t︱dimensions of the machine ca. m︱
          Horizontal machining centre with: - CNC control FANUC 18iMB - 2 x 1000x1000mm pallets - B-axis with 1° indexing - IKZ - high cooling through the working spindle & external 30-70bar - 60-fold tool magazine ISO 50 - Chip conveyor - CE
            x-travel 2000 mm
            y-travel 1120 mm
            z-travel 1000 mm
            control FANUC 18 I MB
            numbers of pallets 2
            pallet size: 1000 x 1000 mm
            max. workpiece weight 2000 kg
            Spindle RPM 6000 1/min
            spindle drive 22/26 kW
            toolpiece magazine: chain magazi. 60 Stück
            rapid travel x/y/z 12 m/min
            distance spindle /table 75 - 1195 mm
            total power requirement 68,46 kVA
            weight of the machine ca. 27 t
            Description :
            Horizontal machining centre with:
            - CNC control FANUC 18iMB
            - 2 x 1000x1000mm pallets
            - B-axis with 1° indexing
            - IKZ - high cooling through the working spindle & external 30-70bar
            - 60-fold tool magazine ISO 50
            - Chip conveyor
            - CE


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal GROB G320

          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland
          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2023041 · Machining Center - Horizontal

          GROB - G320 - - 2006 - Siemens 840D

          Technical details
          x-travel 600 mm︱y-travel 720 mm︱z-travel 655 mm︱Control Siemens 840D ︱main spindle: ︱number of spindles 2 Stück︱max. turning speeds 15000 min/-1︱tool magazin: ︱tool taper HSK 63 A ︱
          In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            x-travel 600 mm
            y-travel 720 mm
            z-travel 655 mm
            Control Siemens 840D
            number of spindles 2 Stück
            max. turning speeds 15000 min/-1
            tool taper HSK 63 A
            Description :
            In our opinion, the machine is in very good condition
            condition and can be inspected under power by appointment.

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal HÜLLER-HILLE BLUESTAR 5

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17832 · Machining Center - Horizontal

          HÜLLER-HILLE - BLUESTAR 5 - - 2005 - SIN 840 D SIEMENS

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 700 mm︱Control SIN 840 D SIEMENS︱spindle turning speed - stepless 10.000 U/min︱power capacity at 100 % load 13,00 kW︱feeding force at 40 % ED 18,00 KW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X/Y/Z 5,00 kN︱B - axis 360 x 1 °︱B-axis 30,00 U/min︱size of pallet 2x 500 x 500 mm︱workpiece weight 500 kg︱0 700 x 700 x 750 mm︱ tool magacine with 40 Plätzen︱tool length - max. 350 mm︱tool diameter 80 mm︱
          Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;
            x-travel 700 mm
            y-travel 630 mm
            z-travel 700 mm
            Control SIN 840 D SIEMENS
            spindle turning speed - stepless 10.000 U/min
            power capacity at 100 % load 13,00 kW
            feeding force at 40 % ED 18,00 KW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X/Y/Z 5,00 kN
            B - axis 360 x 1 °
            B-axis 30,00 U/min
            size of pallet 2x 500 x 500 mm
            workpiece weight 500 kg
            0 700 x 700 x 750 mm
            tool magacine with 40 Plätzen
            tool length - max. 350 mm
            tool diameter 80 mm
            Description :
            Horizontal machining center with SIEMENS SIN840D (PCU50);
            chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal HÜLLER-HILLE BLUESTAR 5

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17833 · Machining Center - Horizontal

          HÜLLER-HILLE - BLUESTAR 5 - - 2005 - SIN 840 D SIEMENS

          Technical details
          x-travel 700 mm︱y-travel 630 mm︱z-travel 700 mm︱Control SIN 840 D SIEMENS︱spindle turning speed - stepless 10.000 U/min︱power capacity at 100 % load 13,00 kW︱feeding force at 40 % ED 18,00 KW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X/Y/Z 5,00 kN︱B - axis 360 x 1 °︱B-axis 30,00 U/min︱size of pallet 2x 500 x 500 mm︱workpiece weight 500 kg︱0 700 x 700 x 750 mm︱ tool magacine with 40 Plätzen︱tool length - max. 350 mm︱tool diameter 80 mm︱
          Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;
            x-travel 700 mm
            y-travel 630 mm
            z-travel 700 mm
            Control SIN 840 D SIEMENS
            spindle turning speed - stepless 10.000 U/min
            power capacity at 100 % load 13,00 kW
            feeding force at 40 % ED 18,00 KW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X/Y/Z 5,00 kN
            B - axis 360 x 1 °
            B-axis 30,00 U/min
            size of pallet 2x 500 x 500 mm
            workpiece weight 500 kg
            0 700 x 700 x 750 mm
            tool magacine with 40 Plätzen
            tool length - max. 350 mm
            tool diameter 80 mm
            Description :
            Horizontal machining center with SIEMENS SIN840D (PCU50);
            chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min;



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAKINO a81-A137 c

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17993 · Machining Center - Horizontal

          MAKINO - a81-A137 c - - 2005 - FANUC Pro-3

          Technical details
          x-travel 900 mm︱y-travel 800 mm︱z-travel 1020 mm︱Control FANUC Pro-3 ︱turning speeds 10.000 U/min︱size of pallet 630 x 630 mm︱table load capacity 1.200 KG︱tool taper HSK-A 100 ︱number of tools in the magazine 137 ︱ bar︱NC rotary table 0,001 °︱rapid traverse 50 m/min︱spindle drive 30 kW︱torque 420 Nm︱total power requirement kW︱weight of the machine ca. 21,00 t︱dimensions of the machine ca. 8,30 x 5,00 x 3,50 m︱
          Without coolant system, was connected to central supply
            x-travel 900 mm
            y-travel 800 mm
            z-travel 1020 mm
            Control FANUC Pro-3
            turning speeds 10.000 U/min
            size of pallet 630 x 630 mm
            table load capacity 1.200 KG
            tool taper HSK-A 100
            number of tools in the magazine 137
            NC rotary table 0,001 °
            rapid traverse 50 m/min
            spindle drive 30 kW
            torque 420 Nm
            weight of the machine ca. 21,00 t
            dimensions of the machine ca. 8,30 x 5,00 x 3,50 m
            Description :
            Without coolant system, was connected to central supply


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MORI SEIKI NH 5000-40

          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23009 · Machining Center - Horizontal

          MORI SEIKI - NH 5000-40 - - 2005 - MSX 501

          Technical details
          x-travel 630 mm︱y-travel 600 mm︱z-travel 670 mm︱Control MSX 501 ︱spindle turning speed - stepless 14000 U/min︱tool taper BT 40 ︱pallet chang. with pallet turn. 360x1 degree 2 ︱max. workpiece weight 500 kg︱tool change unit 60 fach ︱table-size 500 x 500 mm︱total power requirement 56 kW︱weight of the machine ca. 11,8 t︱dimensions of the machine ca. 5,8 x 3,6 x 3,0 m︱
            x-travel 630 mm
            y-travel 600 mm
            z-travel 670 mm
            Control MSX 501
            spindle turning speed - stepless 14000 U/min
            tool taper BT 40
            pallet chang. with pallet turn. . 2
            max. workpiece weight 500 kg
            tool change unit 60 fach
            table-size 500 x 500 mm
            total power requirement 56 kW
            weight of the machine ca. 11,8 t
            dimensions of the machine ca. 5,8 x 3,6 x 3,0 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAZAK FH 8800

          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland
          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-2306 · Machining Center - Horizontal

          MAZAK - FH 8800 - - 2004-03 - Mazatrol PC Fusion 640 M

          Technical details
          x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control Mazatrol PC Fusion 640 M ︱total power requirement 64,6 kVA︱weight of the machine ca. 24 t︱dimensions of the machine ca. m︱
          Machine in good working condition. Inspection under power in the factory possible. New price over € 1,0 million. Equipment and technical data: CNC control Mazak Mazatrol PC Fusion 640 M With Performance CNC package EIA / ISO conversion Preparation measuring device for Renishaw Tool length measurement up to 600 mm Spindle speed max. 7000 rpm. Torque increased with 2 gear stages Tool holder BT/SK 50 Max. torque 1177 Nm With 10-pos pallet pool, can be reduced to 6 pallets B axis 360 x 1 deg Pallet size 800 x 800 mm Max. workpiece weight 2200 kg Max. workpiece diameter 1250 mm Max. workpiece height 1250 mm 240-fold tool changer (modified to 50% higher speed) Max. tool length 652 mm Max. tool diameter 135 mm, with free additional space 260 mm Tool weight 30 kg
            x-travel 1300 mm
            y-travel 1100 mm
            z-travel 1000 mm
            Control Mazatrol PC Fusion 640 M
            total power requirement 64,6 kVA
            weight of the machine ca. 24 t
            Description :
            Machine in good working condition.
            Inspection under power in the factory possible.
            New price over € 1,0 million.

            Equipment and technical data:
            CNC control Mazak Mazatrol PC Fusion 640 M
            With Performance CNC package
            EIA / ISO conversion
            Preparation measuring device for Renishaw
            Tool length measurement up to 600 mm
            Spindle speed max. 7000 rpm.
            Torque increased with 2 gear stages
            Tool holder BT/SK 50
            Max. torque 1177 Nm
            With 10-pos pallet pool, can be reduced to 6 pallets
            B axis 360 x 1 deg
            Pallet size 800 x 800 mm
            Max. workpiece weight 2200 kg
            Max. workpiece diameter 1250 mm
            Max. workpiece height 1250 mm
            240-fold tool changer (modified to 50% higher speed)
            Max. tool length 652 mm
            Max. tool diameter 135 mm, with free additional space 260 mm
            Tool weight 30 kg


        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal Krauseco-Mauser FS 630-5

          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland
          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03584 · Machining Center - Horizontal

          Krauseco-Mauser - FS 630-5 - - 2004 - Siemens

          Technical details
          x-travel 800 mm︱y-travel 630 mm︱z-travel 710 mm︱Control Siemens ︱type 840Dsl ︱Number of spindles 2 St.︱turning speeds 30-12000 U/min︱tool taper HSK 63 ︱Tool changer 80 Pos.︱Feed 1-40.000 mm/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Doppelwendespanner Maschinennummer 0552.80.00
            x-travel 800 mm
            y-travel 630 mm
            z-travel 710 mm
            Control Siemens
            type 840Dsl
            Number of spindles 2 St.
            turning speeds 30-12000 U/min
            tool taper HSK 63
            Tool changer 80 Pos.
            Feed 1-40.000 mm/min
            Description :
            Doppelwendespanner

            Maschinennummer 0552.80.00



        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal HÜLLER – HILLE (MAG) NBH 135 Speed

          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland
          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-7019 · Machining Center - Horizontal

          HÜLLER – HILLE (MAG) - NBH 135 Speed - - 2004 - Sinumerik 840 D

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱Control Sinumerik 840 D︱b-axis 360 °︱turning speeds 16.000 U/min︱rapid traverse 60 m/min︱tool taper HSK 63 ︱tool magazin: 144 Plätze︱total power requirement ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 7,4 x 3,35 x 3,7 m︱
          Pallet changing device: 180 ° NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50mü Double chamber filter 60mü for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            Control Sinumerik 840 D
            b-axis 360 °
            turning speeds 16.000 U/min
            rapid traverse 60 m/min
            tool taper HSK 63
            tool magazin: 144 Plätze
            weight of the machine ca. 17 t
            dimensions of the machine ca. 7,4 x 3,35 x 3,7 m
            Description :
            Pallet changing device: 180 °
            NC rotary table
            Set-up station
            Full-space enclosure with workspace rinsing and manual rinsing gun
            Coolant system with IKZ
            Coolant pump 20-70 bar
            Coil suction filter 50mü
            Double chamber filter 60mü for internal coolant supply incl. prewarning
            Chip conveyor in scraper belt design
            Renishaw measuring system with probe
            Tool breakage control parallel to machining time (mech. probe) in tool magazine
            Incl. fixtures / clamping angle


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

          • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Machining Center - Horizontal MAZAK PFH 5800 + PMC

          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande
          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2772 · Machining Center - Horizontal

          MAZAK - PFH 5800 + PMC - - 2004 - Mazatrol 640M

          Technical details
          Control Mazatrol 640M ︱Pallet table size 500x500 mm︱Number of pallets 10 x︱Table load 700 kg︱Movement X-axis 730 mm︱Movement Y-axis 730 mm︱Movement Z-axis 740 mm︱Table indexing 360 x 1 °︱Spindle taper CAT 40 ︱Spindle Speed 12.000 1/min︱Spindle motor 22/15 kW︱Magazin capacity 80 ︱Required floor space 9850 x 10145 mm︱Length mm︱Width mm︱Height 3050 mm︱Weight 11600 kg︱
            Control Mazatrol 640M
            Pallet table size 500x500 mm
            Number of pallets 10 x
            Table load 700 kg
            Movement X-axis 730 mm
            Movement Y-axis 730 mm
            Movement Z-axis 740 mm
            Table indexing 360 x 1 °
            Spindle taper CAT 40
            Spindle Speed 12.000 1/min
            Spindle motor 22/15 kW
            Magazin capacity 80
            Required floor space 9850 x 10145 mm
            Height 3050 mm
            Weight 11600 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

          • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   
            •

          Get a used horizontal machining center from LagerMaschinen.
          LagerMaschinen can provide you with a used horizontal machining center.

          A horizontal machining center is a machining tool used to machine materials such as metal and wood. In contrast to a vertical machining center the cutter on a horizontal machining center is oriented horizontally meaning the machine will cut horizontally. Furthermore the cutters are not stationary one can move the cutters along a radius giving you more flexibility with your machining. Some variations of the horizontal machining center include a table that rotates as well giving you universal pivoting while you are working. These machines come in all sizes from small tabletop machines to machines the size of a large room. Many also work with computer numerical control (CNC) while others are operated manually or mechanically. Regardless of the type of horizontal machining center you need LagerMaschinen is sure to have a machine that safely satisfies your needs.

          LagerMaschinen guarantees quality used machines for all your needs.

          Your company may have a number of reasons to purchase a horizontal machining center: these machines can be used to cut grooves in materials to create contours and puncture holes. If your business involves machining in any form a horizontal machining center is an essential part of your equipment. However the cost of new machines can sometimes be prohibitive in particular for small and medium-sized companies. LagerMaschinen has a worldwide network and ensures that its used machines meet rigorous standards so that you do not lose quality. Buy a used horizontal machining center from LagerMaschinen and rest assured that you have a quality product.

          TOP Manufacturer:

          MAZAK - MORI SEIKI - MAKINO - GROB - STARRAG HECKERT - HELLER - HÜLLER-HILLE - DMG MORI - DMG - BURKHARDT + WEBER -

          Compendio
          Software
          Contenido de maquinas usadas
          Privacidad
          Síguenos
          © 2000-2023, Logotech oHG · Software- y servicios de Internet - Todos los derechos reservados