turning diameter over bed 480 mm︱turning diameter over slide rest 295 mm︱turning speed range - main spindle 20 - 2190 min/-1︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

centre height 270 mm︱turning diameter 520 mm︱centre distance 800 mm︱center height over slide 175 mm︱turning dia. over slide 350 mm︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

centre height 135 mm︱centre distance 630 mm︱turning diameter over bed 315 mm︱Turning diameter via cross slide 150 mm︱Cross-sled travel path 180 mm︱bed sled driveway 630 mm︱spindle tunring speed 45 - 3000 U/min︱spindle bore 40 mm︱spindle cone MK5 ︱Rapid traverse / feed plan 0,015 - 0,35 mm︱Rapid traverse / longitudinal feed 0,015 - 0,35 mm︱dimensions of the machine ca. 1750 x 1000 x 1700 mm︱weight of the machine ca. 1200 kg︱Rated power supply 400 Volt︱

---

turning diameter over bed 500 mm︱weight of the machine ca. 1785 kg︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter over bed 1250 mm︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 395 mm︱turning length 490 mm︱control Fanuc Oi-TF+ ︱turning diameter over bed 650 mm︱turning diameter over cross slideways 540 mm︱main spindle: ︱max. turning speeds 6.000 min/-1︱drive capacity - main spindle 11/18,5 kW︱sub spindle: ︱max. turning speeds 6.0000 min/-1︱spindle bore 61 mm︱max. rod diameter 52 mm︱spindle head A2-5 ︱tool turret: ︱number of tool places 12 Pos.︱tool taper BMT 55 ︱shaft height for square tool 25 mm︱Drill shank diameter 40 mm︱travel: ︱x-axis 235 mm︱

---

In our opinion, the machine is in mint condition Condition and can be viewed under power by appointment. Technical features & accessories: - Commissioning 05/2022 - c-axis - y-axis - counter spindle - Coolant system with 10 bar delivery pressure - Oil skimmer with endless belt for extraneous oil separation - Warning light with 3 colors - Workroom lighting - Bar loader interface for connecting loading magazines - Part ejector on counter spindle including cooling through the spindle - Parts catcher with collection box - Chuck blow-out device on the counter spindle - Automatic tool measurement arm - transformer - Chip conveyor, side ejection - Bar loader, Samsys Smart, 5-65 mm, bar length max: 1200 mm - Palette accessories, see picture If you are interested in financing, leasing can be discussed individually. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter over bed 554 mm︱turning diameter over cross slideways 370 mm︱centre height 280 mm︱turning length 1500 mm︱bed width 400 mm︱spindle bore 104 mm︱spindle taper DIN 55029 / D1-11 ︱spindle tunring speed 1 - 2.000 U/min︱tail stock: ︱tool adaptor MK 6 ︱diameter of quill 95 mm︱quill stroke 145 mm︱

---

Axis: 7 ︱Control Fanuc 31 i ︱main spindle: ︱max. rod diameter 60 mm︱max. turning speeds 5000 min/-1︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1: ︱

---

In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar loader, usable length 5m *** Changes and errors in the technical data and information, as well Subject to prior sale! ***

turning diameter 350 mm︱turning length 650 mm︱control Siemens 840D ︱turning diameter over bed 385 mm︱main spindle: ︱turning speed range - main spindle 0 - 4.000 min/-1︱max. torque 340 Nm︱tool turret: ︱number of tool places 12 Pos.︱tool adaptor VDI 30 ︱travel: ︱x-axis 255 mm︱z-axis 800 mm︱total power requirement 21 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 5 x 2,5 x 2 m︱

---

turning diameter 550 mm︱turning length 900 mm︱control Okuma OSP 7000 L ︱turning diameter over bed 550 mm︱turning diameter over cross slideways 150 mm︱centre distance max. 1174 mm︱main spindle: ︱turning speed range - main spindle 45-4500 min/-1︱drive capacity - main spindle 15 kW︱tool turret: ︱number of tool places 2x12 Pos.︱Drill shank diameter 40 mm︱travel: ︱x-axis 230 mm︱z-axis 900 mm︱feeds: ︱rapid traverse 20x24 m/min︱weight of the machine ca. 8,2 t︱

---

In our estimation, the machine is in very good condition and can be viewed live by appointment. Technical features: - Double spindle lathe - Traverse paths: x1: 230mm : z1 460mm : x2 230mm : z2 900mm - driven tools Accesories: - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 52 mm︱turning length 280 mm︱control Siemens Sinumerik ︱travel: ︱travel -x axis 90 mm︱travel -z axis 280 mm︱spindle tunring speed 5000 U/min︱ 6000 U/min︱rapid traverse 24 m/min︱total power requirement 18 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2,7 x 1,35 x 1,9 m︱

---

In our opinion, the machine is in good condition and can be inspected under power by appointment. Accesories: -Chip conveyor -Bar feeder ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 52 mm︱turning length 280 mm︱control Siemens Sinumerik ︱travel: ︱travel -x axis 90 mm︱travel -z axis 280 mm︱spindle tunring speed 5000 U/min︱ 6000 U/min︱rapid traverse 24 m/min︱total power requirement 18 kW︱weight of the machine ca. 2,6 t︱dimensions of the machine ca. 2,7 x 1,35 x 1,9 m︱

---

In our opinion, the machine is in good condition and can be inspected under power by appointment. Accesories: -Chip conveyor -Bar feeder ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 420 mm︱turning length 600 mm︱control GE Fanuc Series 16-T ︱turning diameter over bed 420 mm︱turning dia. over slide 280 mm︱x-travel 250 mm︱z-travel 620 mm︱spindle bore 65 mm︱turning speed range - main spindle 4000 min/-1︱drive capacity - main spindle 15 kW︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

turning diameter 270 mm︱turning length 410 mm︱control Fanuc 20 T ︱centre distance 650 mm︱spindle tunring speed 30 - 5000 U/min︱auto power on hours 2700 h︱machine weight ab. 1415 kg kg︱Dimensions (L/W/H) 1700 x 1650 x 1170 mm︱

---

In our opinion, the machine is in very good condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 480 mm︱turning length 1500 mm︱control Bahnsteuerung B2T ︱swing diameter over bed slide 315 mm︱dist. between centers 245 mm︱main spindle: ︱turning speed range - main spindle 14 - 3550 min/-1︱drive capacity - main spindle 34 kW︱Number of RPM ranges 4 ︱spindle bearing diameter 100 mm︱spindle bore 62 mm︱spindle head DIN 55022 Gr. 8 ︱tool turret: ︱number of tool places 12 Pos.︱Lathe tool cross-section 25 mm︱Drill shank diameter 50 mm︱tail stock: ︱tailstock quill diameter 100 mm︱quill stroke 150 mm︱tip feed speed 6000 mm/min︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

Axis 7 ︱control Fanuc ︱main spindle: ︱turning diameter 60 mm︱spindle tunring speed 5000 U/min︱spindle motor 7,5/5,5 kW︱sub spindle: ︱max. turning diameter 42 mm︱max. turning speeds 5000 min/-1︱spindle motor 3,7/2,2 kW︱Axis: ︱max speed (Z4) 15 m/min︱max. acceleration 5 m/s2︱travel X1 / X2 / X3 60 mm︱travel X4 130 mm︱travel Z2 80 mm︱tavel Z3 80 mm︱travel Z4 340 mm︱Nominal thrust X1 / X2 / X3 / X4 / Z2 /Z3 / Z4 4400 N︱Tool holder slide 1: ︱

---

In our assessment, the machine is in a very good used condition State and can be viewed by appointment. - Bar feeder interface - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***

Control Siemens 840DSL ︱max. swing diameter 420 mm︱max. turning height 300 mm︱main spindle: ︱max. turning speeds 3400 min/-1︱drive capacity - main spindle 45 / 35 kW︱max. torque 775 / 600 Nm︱chucking diameter 315 / 400 mm︱tool turret: ︱number of tool places 12 Pos.︱Shank diameter 40 mm︱travel: ︱x-axis 850 mm︱z-axis 315 mm︱feeds: ︱rapid traverse (x/z) 45 / 30 m/min︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,2 x 1,5 x 3,5 m︱

---

In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 140 mm︱turning length 630 mm︱control Siemens 840 SL ︱max. swing diameter over bed 250 mm︱main spindle: ︱turning speed range - main spindle 0 - 5000 min/-1︱max. torque 256 Nm︱spindle bearing diameter 110 mm︱spindle bore 52 mm︱spindle head Gr. 6 DIN 55026 ︱chucking diameter max. 250 mm︱tool turret: ︱number of tool places 3 x 12 Pos.︱tool taper VDI 40 ︱max. tool weight 20 kg︱max. tool diameter 40 mm︱max. tool length 95 mm︱max. workpiece weight 20 kg︱max. workpiece diameter 140 mm︱travel: ︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

turning diameter 160 mm︱turning height 160 mm︱control Siemens Sinumerik 840 D ︱travel: ︱x-axis 575 mm︱y-axis +/- 90 mm︱z-axis 300 mm︱main spindle: ︱max. turning speeds 6000 min/-1︱drive capacity - main spindle 21 / 16 kW︱max. torque 176 Nm︱spindle head 140h5 ︱spindle diameter in front bearing 100 mm︱chucking diameter 160 (200) mm︱C-Axis 0,001 °︱total power requirement 40 kW︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 6,5 x 4,5 x 3 m︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. technical features - ShopTurn ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

faceplate diameter 600 mm︱swing diameter 700 mm︱turning height 600 mm︱Control Siemens Sinumerik System3 ︱speeds 31,5 - 1120 U/min︱ram stroke 600 mm︱

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

chucking diameter 2500 mm︱swing dia. 2630 mm︱workpiece height 1950 mm︱capacity 15 t max. 20 t ︱control Heidenhain ︱

---

In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

Year 1979 Retrofit 2013 ︱max. turning diameter 1300 mm︱table diameter 1000 mm︱workpiece height max. 1500 mm︱working lenght 1050 mm︱ 280 U/min.︱T-slots 48 x 28 ︱speeds 4,75 - 250 U/min︱rapid traverse 6000 mm/min︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 400 mm︱y-travel 250 mm︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 3 identical machines available (see photos). ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

x-travel 1050 mm︱y-travel 900 mm︱z-travel 1030 mm︱Control Siemens S840D sl ︱main spindle: ︱number of spindles 1 Stück︱max. turning speeds 12.000 min/-1︱drive capacity - main spindle 90/50 kW︱table: ︱no. of tables 2 ︱table surface area 630 x 630 mm︱max. workpiece dimensions Durchm. 1050 x H 1300 ︱max. workpiece weight 1500 kg︱tool magazin: ︱number of tool places 60 Pos.︱tool taper HSK100A ︱feeds: ︱rapid traverse ( x / y / z ) 60/60/60 m/min︱Acceleration (x/y/z) 0,64/0,93/0,70 G︱Number of working hours ca. 3260 h︱

---

In our opinion, the machine is in a new condition condition and can be inspected under power by appointment. Commissioning: December 2020 / January 2021 The machine will be available from around June 2023, or earlier by arrangement. Technical features: - IKZ - Closed control loop with integrated position measuring system - Celos with Siemens, ERGOline Control - Simultaneous 4-axis machining - Workpiece / fixture measurement (Fanuc) - Tool breakage control system in the tool magazine Accesories: - chip conveyor - Probe, Renishaw OMP 60 Miscellaneous: - Minimum pallet indexing angle 0.001 degrees - A 3D data model software for programming systems can also be purchased will ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***