,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Kirchgeorg Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe COMEV CM 400 x 3000


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20443 · Center Lathe

          COMEV - CM 400 x 3000 - - 2011 -

          Technical details
          turning diameter over bed 800 mm︱turning diameter over slide rest 580 mm︱turning length 3.000 mm︱center height over bed 400 mm︱centre distance 3.000 mm︱digital readout 3-Achsen HEIDENHAIN︱bed width 400 mm︱spindle bore 110 mm︱turning speed range 25 - 1.610 U/min︱power requirement 9,2 kW︱3-jaw-chuck diameter 315 mm︱quick change toolholder MULTIFIX Typ C︱taper in tailstock-quill MK 5 ︱dia. of quill 100 mm︱quill stroke 340 mm︱coolant ︱voltage 380 V︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 4,90 x 1,60 x 2,00 m︱
          - Serial No.: 7634 - Rapid feed for Z- and X-Axis - 3-Axis DRO System HEIDENHAIN - 3-Jaw Chuck FORKARDT F+315, dia.31 5mm - Quich Change Tool Holders MULTIFIX - fixed steady rest - rotating center - Face chuck, dia. 800 mm - various tool holders - Coolant equipment Machine is in excellent condition!
            turning diameter over bed 800 mm
            turning diameter over slide rest 580 mm
            turning length 3.000 mm
            center height over bed 400 mm
            centre distance 3.000 mm
            digital readout 3-Achsen HEIDENHAIN
            bed width 400 mm
            spindle bore 110 mm
            turning speed range 25 - 1.610 U/min
            power requirement 9,2 kW
            3-jaw-chuck diameter 315 mm
            quick change toolholder MULTIFIX Typ C
            taper in tailstock-quill MK 5
            dia. of quill 100 mm
            quill stroke 340 mm
            voltage 380 V
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 4,90 x 1,60 x 2,00 m
            Description :
            - Serial No.: 7634
            - Rapid feed for Z- and X-Axis
            - 3-Axis DRO System HEIDENHAIN
            - 3-Jaw Chuck FORKARDT F+315, dia.31 5mm
            - Quich Change Tool Holders MULTIFIX
            - fixed steady rest
            - rotating center
            - Face chuck, dia. 800 mm
            - various tool holders
            - Coolant equipment

            Machine is in excellent condition!
          Datasheet
          Request / Contact
          used  Center Lathe GEMA LZ 200


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20483 · Center Lathe

          GEMA - LZ 200 - - 1973 / 1997 -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 220 mm︱turning length 1.000 mm︱center height over bed 200 mm︱centre distance 1.000 mm︱bed width 320 mm︱spindle bore 55 mm︱turning speed range 25 - 1.500 U/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder MULTIFIX Typ B︱taper in tailstock-quill MK 4 ︱dia. of quill 60 mm︱quill stroke 170 mm︱coolant ︱voltage 380 V︱total power requirement 4,5 kW︱weight of the machine ca. 1,45 t︱dimensions of the machine ca. 2,40 x 1,00 x 1,25 m︱
          Machine was overhauled in 1997. It comes from a training company and is in first class condition. - Serial-No.: 12.73 0577 - spindle brake - chuck guard - emergency stop switch - 3-jaw face spiral chuck RÖHM - quick change tool holder MULTIFIX - rotating center punch - coolant device
            turning diameter over bed 400 mm
            turning diameter over slide rest 220 mm
            turning length 1.000 mm
            center height over bed 200 mm
            centre distance 1.000 mm
            bed width 320 mm
            spindle bore 55 mm
            turning speed range 25 - 1.500 U/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder MULTIFIX Typ B
            taper in tailstock-quill MK 4
            dia. of quill 60 mm
            quill stroke 170 mm
            voltage 380 V
            total power requirement 4,5 kW
            weight of the machine ca. 1,45 t
            dimensions of the machine ca. 2,40 x 1,00 x 1,25 m
            Description :
            Machine was overhauled in 1997.
            It comes from a training company
            and is in first class condition.

            - Serial-No.: 12.73 0577
            - spindle brake
            - chuck guard
            - emergency stop switch
            - 3-jaw face spiral chuck RÖHM
            - quick change tool holder MULTIFIX
            - rotating center punch
            - coolant device
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear/CNC-Heidenhain


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20344 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear/CNC-Heidenhain - - 2004 - Data Pilot 4290 HEIDENHAIN

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control Data Pilot 4290 HEIDENHAIN︱swing diameter 680 mm︱bar diameter 65 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electronic hand wheel - C-Axis / driven tools - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control Data Pilot 4290 HEIDENHAIN
            swing diameter 680 mm
            bar diameter 65 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260003251
            - Machine ON: 19.039 h
            - Programm ON: 2.676 h
            - control: HEIDENHAIN Data Pilot 4290
            - New main spindle bearings
            - Z-Axis ball screw reconditioned incl. new bearings
            - electronic hand wheel
            - C-Axis / driven tools
            - chip conveyor
            - coolant equipment
            - machine lamp
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center GILDEMEISTER CTX 420 linear V3 - Siem. 840D


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20346 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 420 linear V3 - Siem. 840D - - 2003 - SINUMERIK 840D ShopTurn

          Technical details
          turning diameter 324 mm︱turning length 600 mm︱control SINUMERIK 840D ShopTurn︱swing diameter 680 mm︱bar diameter 65 mm︱travel -x axis 260 mm︱travel -z axis 635 mm︱spindle speed: 5000 1/min︱spindle bore 79 mm︱C-Axis 0,025 °︱turret head 12 Pos. / VDI 40︱Driven Tools 12 Pos. 4.500 U/min︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 45 m/min︱taper in tailstock-quill MK 5 ︱tailstock travel 580 mm︱drive capacity - spindle motor 25 kW︱voltage 400 V︱total power requirement 50 kVA︱weight of the machine ca. 6,0 t︱
          - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electronic hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp
            turning diameter 324 mm
            turning length 600 mm
            control SINUMERIK 840D ShopTurn
            swing diameter 680 mm
            bar diameter 65 mm
            travel -x axis 260 mm
            travel -z axis 635 mm
            spindle speed: 5000 1/min
            spindle bore 79 mm
            C-Axis 0,025 °
            turret head 12 Pos. / VDI 40
            Driven Tools 12 Pos. 4.500 U/min
            rapid traverse X-axis 60 m/min
            rapid traverse Z-axis 45 m/min
            taper in tailstock-quill MK 5
            tailstock travel 580 mm
            drive capacity - spindle motor 25 kW
            voltage 400 V
            total power requirement 50 kVA
            weight of the machine ca. 6,0 t
            Description :
            - Serial-No.: 02260001561
            - Machine ON: 64.692 h
            - Programm ON: 18.296 h
            - control: SIEMENS 840D ShopTurn
            - electronic hand wheel
            - C-Axis / driven tools
            - Spindle bearings NEW
            - Ball screw Z-Axis incl. bearings NEW
            - chip conveyor
            - coolant equipment
            - machine lamp
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled WAGNER WDE 500


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20401 · Lathe - cycle-controlled

          WAGNER - WDE 500 - - 2010 - Sinumerik

          Technical details
          centre height 250 mm︱centre distance 1500 mm︱turning diameter over bed 500 mm︱turning diameter over slide 280 mm︱turning length 1500 mm︱spindle taper D8 ︱control Sinumerik ︱bed width 390 mm︱spindle bore 82 mm︱turning speed range 45-2000 U/min︱rapid travel - longitudinal/face 8/4 m/min︱3-jaw-chuck diameter 250 mm︱quick change toolholder System Multifix ︱drive capacity - spindle motor 6,5 kW︱taper in tailstock-quill MK 5 ︱dia. of quill 75 mm︱quill stroke 150 mm︱coolant 3,0 ︱voltage 400 V︱total power requirement 24 kVA︱
          - Serial-No. G01262 - Control: Sinumerik 802 C
            centre height 250 mm
            centre distance 1500 mm
            turning diameter over bed 500 mm
            turning diameter over slide 280 mm
            turning length 1500 mm
            spindle taper D8
            control Sinumerik
            bed width 390 mm
            spindle bore 82 mm
            turning speed range 45-2000 U/min
            rapid travel - longitudinal/face 8/4 m/min
            3-jaw-chuck diameter 250 mm
            quick change toolholder System Multifix
            drive capacity - spindle motor 6,5 kW
            taper in tailstock-quill MK 5
            dia. of quill 75 mm
            quill stroke 150 mm
            coolant 3,0
            voltage 400 V
            total power requirement 24 kVA
            Description :
            - Serial-No. G01262
            - Control: Sinumerik 802 C
          Datasheet
          Request / Contact

          Mechanician s Lathe

          used  Mechanician s Lathe WEILER


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19236 · Mechanician s Lathe

          WEILER - - - -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 110 mm︱turning length 350 mm︱center height over bed 125 mm︱centre distance 350 mm︱bed width 170 mm︱spindle bore 24 mm︱turning speed range 440 - 3600 U/min︱voltage 380 V︱weight of the machine ca. 350 kg︱dimensions of the machine ca. 1,25 x 0,55 x 1,25 m︱
          - revolver 5-fold - Collet equipment
            turning diameter over bed 250 mm
            turning diameter over slide rest 110 mm
            turning length 350 mm
            center height over bed 125 mm
            centre distance 350 mm
            bed width 170 mm
            spindle bore 24 mm
            turning speed range 440 - 3600 U/min
            voltage 380 V
            weight of the machine ca. 350 kg
            dimensions of the machine ca. 1,25 x 0,55 x 1,25 m
            Description :
            - revolver 5-fold
            - Collet equipment
          Datasheet
          Request / Contact
          used  Mechanician s Lathe GROENEWEGEN Gromatic


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19179 · Mechanician s Lathe

          GROENEWEGEN - Gromatic - - -

          Technical details
          turning diameter over bed 280 mm︱turning diameter over slide rest 160 mm︱turning length 500 mm︱center height over bed 140 mm︱bed width 170 mm︱spindle bore Ø 28 mm︱turning speed range 76 - 960 U/min︱power capacity 0,6 kW︱3-jaw-chuck diameter 130 mm︱voltage 380 V︱total power requirement 0,6 kW︱weight of the machine ca. 500 kg︱
          - S/N: 72530 - without tailstock
            turning diameter over bed 280 mm
            turning diameter over slide rest 160 mm
            turning length 500 mm
            center height over bed 140 mm
            bed width 170 mm
            spindle bore Ø 28 mm
            turning speed range 76 - 960 U/min
            power capacity 0,6 kW
            3-jaw-chuck diameter 130 mm
            voltage 380 V
            total power requirement 0,6 kW
            weight of the machine ca. 500 kg
            Description :
            - S/N: 72530
            - without tailstock
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine OPTIMUM B 24 H Vario


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-B24HVar · Bench Drilling Machine

          OPTIMUM - B 24 H Vario - - NEU -

          Technical details
          bore capacity in steel (diameter) 24 mm︱throat 165 mm︱bore stroke 85 mm︱table surface area 280 x 300 mm︱spindle taper MT 2 ︱spindle turning speed - stepless 100 - 5950 U/min︱voltage 230 V︱total power requirement 1,5 kW︱weight of the machine ca. 85 kg︱dimensions of the machine ca. 0,45 x 0,65 x 1,00 m︱
          - Infinitely variable speed - Keyless drill chuck 1-16 mm
            bore capacity in steel (diameter. 24 mm
            throat 165 mm
            bore stroke 85 mm
            table surface area 280 x 300 mm
            spindle taper MT 2
            spindle turning speed - stepless 100 - 5950 U/min
            voltage 230 V
            total power requirement 1,5 kW
            weight of the machine ca. 85 kg
            dimensions of the machine ca. 0,45 x 0,65 x 1,00 m
            Description :
            - Infinitely variable speed
            - Keyless drill chuck 1-16 mm
          Datasheet
          Request / Contact

          Boring Machine - Automatic

          used  Boring Machine - Automatic ALZMETALL ABOMAT 50


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19072 · Boring Machine - Automatic

          ALZMETALL - ABOMAT 50 - - 1986 - PLC-Steuerung

          Technical details
          bore diameter 65 mm︱throat 380 mm︱Control PLC-Steuerung ︱bore spindle turning speed range 63 - 1600 U/min︱table-size 630 x 500 mm︱rapid traverse Z-axis 4,75 m/min︱boring feeds: 0,05 - 0,56 mm/U︱total power requirement 9 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 1,50 x 1,20 x 2,95 m︱
            bore diameter 65 mm
            throat 380 mm
            Control PLC-Steuerung
            bore spindle turning speed range 63 - 1600 U/min
            table-size 630 x 500 mm
            rapid traverse Z-axis 4,75 m/min
            boring feeds: 0,05 - 0,56 mm/U
            total power requirement 9 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 1,50 x 1,20 x 2,95 m
            Description :

          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal AXON LITZ LU 620 / iTNC 640


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20446 · Machining Center - Universal

          AXON LITZ - LU 620 / iTNC 640 - - 2017 -

          Technical details
          x-travel 620 mm︱y-travel 520 mm︱z-travel 460 mm︱CNC-control iTNC 640 HEIDENHAIN︱Table dimensions Ø 650 mm︱max. table load 300 kg︱spindle taper SK 40 ︱spindle turning speed range 12.000 U/min︱feed range 1 - 20.000 mm/min︱rapid traverse 36 m/min︱coolant IKZ 30 bar︱voltage 400 V︱total power requirement 25 kVA︱weight of the machine ca. 9,2 t︱dimensions of the machine ca. 2,35 x 4,15 x 2,95 m︱chip conveyor 2,60 x 1,65 x 1,20 m︱Oil cooler 0,50 x 0,70 x 1,45 m︱water cooling unit 0,70 x 0,70 x 0,80 m︱
          - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction
            x-travel 620 mm
            y-travel 520 mm
            z-travel 460 mm
            CNC-control iTNC 640 HEIDENHAIN
            Table dimensions Ø 650 mm
            max. table load 300 kg
            spindle taper SK 40
            spindle turning speed range 12.000 U/min
            feed range 1 - 20.000 mm/min
            rapid traverse 36 m/min
            coolant IKZ 30 bar
            voltage 400 V
            total power requirement 25 kVA
            weight of the machine ca. 9,2 t
            dimensions of the machine ca. 2,35 x 4,15 x 2,95 m
            chip conveyor 2,60 x 1,65 x 1,20 m
            Oil cooler 0,50 x 0,70 x 1,45 m
            water cooling unit 0,70 x 0,70 x 0,80 m
            Description :
            - Serial-No.: 6LUD00185
            - Control ON: 10.918 h
            - Spindle ON: 2.725 h
            - Control: HEIDENHAIN iTNC 640
            - 3-D touch probe HEIDENHAIN TS 740
            - Travel distance B-Axis 50º/+110º,C-Axis 360º
            - Internal coolant supply through
            spindle 30 bar
            - Electr. handwheel
            - Laser tool measurement
            - chip conveyor
            - suction
          Datasheet
          Request / Contact
          used  Machining Center - Universal HERMLE (5-Achsen) C 800 U / TNC 430


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20180 · Machining Center - Universal

          HERMLE (5-Achsen) - C 800 U / TNC 430 - - 1997 -

          Technical details
          x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱CNC-control TNC 430 HEIDENHAIN︱Table dimensions 540 x 540 x Ø 630 mm︱max. table load 300 kg︱spindle taper SK 40 ︱spindle turning speed range 15.000 U/min︱drive capacity - spindle motor 10,5 kW︱feed range 30.000 mm/min︱rapid traverse 30 m/min︱tool change unit 30 Pos.︱coolant ︱voltage 400 V︱total power requirement 31,0 kVA︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. 2,85 x 3,45 x 2,70 m︱
          - Serial-No.: 11875 - Machine ON: - Programm ON: - control: TNC 430 HEIDENHAIN - electrical hand wheel - coolant equipment
            x-travel 800 mm
            y-travel 600 mm
            z-travel 500 mm
            CNC-control TNC 430 HEIDENHAIN
            Table dimensions 540 x 540 x Ø 630 mm
            max. table load 300 kg
            spindle taper SK 40
            spindle turning speed range 15.000 U/min
            drive capacity - spindle motor 10,5 kW
            feed range 30.000 mm/min
            rapid traverse 30 m/min
            tool change unit 30 Pos.
            voltage 400 V
            total power requirement 31,0 kVA
            weight of the machine ca. 8,0 t
            dimensions of the machine ca. 2,85 x 3,45 x 2,70 m
            Description :
            - Serial-No.: 11875
            - Machine ON:
            - Programm ON:
            - control: TNC 430 HEIDENHAIN
            - electrical hand wheel
            - coolant equipment
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical POS Posmill E 1100 / iTNC 530


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20475 · Machining Center - Vertical

          POS - Posmill E 1100 / iTNC 530 - - 2014 -

          Technical details
          x-travel 1.100 mm︱y-travel 600 mm︱z-travel 510 mm︱CNC-control iTNC 530 HEIDENHAIN︱table-size 1.300 x 630 mm︱max. table load 1.000 kg︱spindle taper SK 40 ︱spindle turning speed range 180 - 10.000 U/min︱rapid traverse 32 m/min︱tool change unit 40 Pos.︱coolant IKZ ︱voltage 400 V︱total power requirement 28 kVA︱weight of the machine ca. 8,8 t︱dimensions of the machine ca. 3,05 x 2,80 (2,45) x 2,45 m︱chip conveyor 4,15 x 0,60 x 1,70 m︱band filter unit 1,90 x 1,00 x 1,40 m︱
          Serial No.: 20140503 - Spindle hours: 5.900 h - CNC-Control: HEIDENHAIN iTNC 530 - internal coolant supply through spindle 40bar - Chip conveyor - electronic hand wheel - Heidenhain 3D work piece touch probe
            x-travel 1.100 mm
            y-travel 600 mm
            z-travel 510 mm
            CNC-control iTNC 530 HEIDENHAIN
            table-size 1.300 x 630 mm
            max. table load 1.000 kg
            spindle taper SK 40
            spindle turning speed range 180 - 10.000 U/min
            rapid traverse 32 m/min
            tool change unit 40 Pos.
            coolant IKZ
            voltage 400 V
            total power requirement 28 kVA
            weight of the machine ca. 8,8 t
            dimensions of the machine ca. 3,05 x 2,80 (2,45) x 2,45 m
            chip conveyor 4,15 x 0,60 x 1,70 m
            band filter unit 1,90 x 1,00 x 1,40 m
            Description :
            Serial No.: 20140503
            - Spindle hours: 5.900 h
            - CNC-Control: HEIDENHAIN iTNC 530
            - internal coolant supply through spindle 40bar
            - Chip conveyor
            - electronic hand wheel
            - Heidenhain 3D work piece touch probe


          Datasheet
          Request / Contact
          used  Machining Center - Vertical MÜGA (teilueberholt) R4530 (4.Achse)


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20311 · Machining Center - Vertical

          MÜGA (teilueberholt) - R4530 (4.Achse) - - 2008 - MITSUBISHI

          Technical details
          x-travel 450 mm︱y-travel 300 mm︱z-travel 300 mm︱control MITSUBISHI ︱table-size 500 x 320 mm︱max. table load 200 kg︱spindle taper BT 30 ︱spindle turning speed range 240 - 15.000 U/min︱rapid traverse 48 m/min︱drive capacity - spindle motor 3,7 kW︱tool change unit 12 Pos.︱coolant IKZ 50 bar︱voltage 400 V︱total power requirement 26 KW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 1,25 x 2,05 x 2,50 m︱band filter unit 1,80 x 0,70 x 1,30 m︱coolant tank 1,20 x 0,90 x 0,50 m︱Spindlecoolant 0,40 x 0,50 x 0,90 m︱Transformer 0,60 x 0,40 x 0,60 m︱
          - serial no.: Q0R1163 - Machine ON: 23.221 h - Control MITSUBISHI - 4th axis - electric handwheel - IKZ 50 bar - oil cooler - belt filter system - div. tool holder - suction
            x-travel 450 mm
            y-travel 300 mm
            z-travel 300 mm
            control MITSUBISHI
            table-size 500 x 320 mm
            max. table load 200 kg
            spindle taper BT 30
            spindle turning speed range 240 - 15.000 U/min
            rapid traverse 48 m/min
            drive capacity - spindle motor 3,7 kW
            tool change unit 12 Pos.
            coolant IKZ 50 bar
            voltage 400 V
            total power requirement 26 KW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 1,25 x 2,05 x 2,50 m
            band filter unit 1,80 x 0,70 x 1,30 m
            coolant tank 1,20 x 0,90 x 0,50 m
            Spindlecoolant 0,40 x 0,50 x 0,90 m
            Transformer 0,60 x 0,40 x 0,60 m
            Description :
            - serial no.: Q0R1163
            - Machine ON: 23.221 h
            - Control MITSUBISHI
            - 4th axis
            - electric handwheel
            - IKZ 50 bar
            - oil cooler
            - belt filter system
            - div. tool holder
            - suction
          Datasheet
          Request / Contact
          used  Machining Center - Vertical SAEILO Contur MMV 660/Sinumerik 810 D


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20148 · Machining Center - Vertical

          SAEILO - Contur MMV 660/Sinumerik 810 D - - 2007 -

          Technical details
          x-travel 660 mm︱y-travel 510 mm︱z-travel 560 mm︱CNC-control Sinumerik 810 D ShopMill SIEMENS︱table-size 900 x 485 mm︱max. table load 450 kg︱spindle taper SK 40 ︱spindle turning speed range 8.000 U/min︱feed stepless 1 - 10.000 mm/min︱rapid traverse 20 m/min︱drive capacity - spindle motor 9,25 kW︱tool change unit 20 Pos.︱coolant ︱chip conveyor Spiralförderer ︱voltage 380 V︱total power requirement 11,0 kVA︱weight of the machine ca. 4,6 t︱dimensions of the machine ca. 2,20 x 2,75 x 2,50 m︱
          - Serial-No.: 07010128 - control: Sinumerik 810 D ShopMill - electrical hand wheel - chip conveyor - coolant equipment
            x-travel 660 mm
            y-travel 510 mm
            z-travel 560 mm
            CNC-control Sinumerik 810 D ShopMill SIEMENS
            table-size 900 x 485 mm
            max. table load 450 kg
            spindle taper SK 40
            spindle turning speed range 8.000 U/min
            feed stepless 1 - 10.000 mm/min
            rapid traverse 20 m/min
            drive capacity - spindle motor 9,25 kW
            tool change unit 20 Pos.
            chip conveyor Spiralförderer
            voltage 380 V
            total power requirement 11,0 kVA
            weight of the machine ca. 4,6 t
            dimensions of the machine ca. 2,20 x 2,75 x 2,50 m
            Description :
            - Serial-No.: 07010128
            - control: Sinumerik 810 D ShopMill
            - electrical hand wheel
            - chip conveyor
            - coolant equipment
          Datasheet
          Request / Contact
          used  Machining Center - Vertical DMG DMC 64 V / iTNC 530 / IKZ


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20170 · Machining Center - Vertical

          DMG - DMC 64 V / iTNC 530 / IKZ - - 2003 -

          Technical details
          x-travel 640 mm︱y-travel 600 mm︱z-travel 500 mm︱CNC-control iTNC 530 HEIDENHAIN︱table-size 850 x 630 mm︱max. table load 600 kg︱spindle taper SK 40 ︱spindle turning speed range 12.000 U/min︱feed stepless 40.000 mm/min︱rapid traverse 60 m/min︱drive capacity - spindle motor 18,0 kW︱tool change unit 30 Pos.︱voltage 400 V︱total power requirement 42 kVA︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3,45 x 2,35 x 2,90 m︱chip conveyor 3,50 x 1,20 x 1,60 m︱coolant 1,70 x 1,20 x 1,60 m︱
          - serial-no.: 29100004772 - Machine ON: 69,044 h - spindle ON: 34,493 h - Control: HEIDENHAIN iTNC 530 - autom. tool measurement BLUM-MICRO - Infrared 3D measuring probe - electr. handwheel - ICZ - Chip conveyor
            x-travel 640 mm
            y-travel 600 mm
            z-travel 500 mm
            CNC-control iTNC 530 HEIDENHAIN
            table-size 850 x 630 mm
            max. table load 600 kg
            spindle taper SK 40
            spindle turning speed range 12.000 U/min
            feed stepless 40.000 mm/min
            rapid traverse 60 m/min
            drive capacity - spindle motor 18,0 kW
            tool change unit 30 Pos.
            voltage 400 V
            total power requirement 42 kVA
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3,45 x 2,35 x 2,90 m
            chip conveyor 3,50 x 1,20 x 1,60 m
            coolant 1,70 x 1,20 x 1,60 m
            Description :
            - serial-no.: 29100004772
            - Machine ON: 69,044 h
            - spindle ON: 34,493 h
            - Control: HEIDENHAIN iTNC 530
            - autom. tool measurement
            BLUM-MICRO
            - Infrared 3D measuring probe
            - electr. handwheel
            - ICZ
            - Chip conveyor
          Datasheet
          Request / Contact
          used  Machining Center - Vertical RÖDERS  (HSC) RFM 600/2


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20164 · Machining Center - Vertical

          RÖDERS (HSC) - RFM 600/2 - - 1999 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 300 mm︱CNC-control Roeders RMS6 ︱table-size 700 x 550 mm︱max. table load 800 kg︱spindle taper ISO ︱spindle turning speed range 42.000 U/min︱feed stepless 0 - 30.000 mm/min︱rapid traverse 30 m/min︱drive capacity - spindle motor 14 kW︱tool change unit Pick-up 18 Pos.︱voltage 400 V︱total power requirement 20 kVA︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 3,00 x 2,30 x 2,70 m︱
          - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system
            x-travel 600 mm
            y-travel 450 mm
            z-travel 300 mm
            CNC-control Roeders RMS6
            table-size 700 x 550 mm
            max. table load 800 kg
            spindle turning speed range 42.000 U/min
            feed stepless 0 - 30.000 mm/min
            rapid traverse 30 m/min
            drive capacity - spindle motor 14 kW
            tool change unit Pick-up 18 Pos.
            voltage 400 V
            total power requirement 20 kVA
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 3,00 x 2,30 x 2,70 m
            Description :
            - Serial No.: 88231-83
            - HSC spindle Fischer MFW1230/42
            - Dust extraction system
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MIKRON VCP 600 / TNC 426


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20128 · Machining Center - Vertical

          MIKRON - VCP 600 / TNC 426 - - 1999 -

          Technical details
          x-travel 600 mm︱y-travel 450 mm︱z-travel 450 mm︱CNC-control Heidenhain TNC 426 ︱table-size 850 x 530 mm︱max. table load 400 kg︱spindle taper HSK 63-A ︱spindle turning speed range max. 20.000 U/min︱feed stepless max. 15.000 mm/min︱rapid traverse 22 m/min︱drive capacity - spindle motor 12 kW︱tool change unit 30 Pos.︱coolant ︱voltage 400 V︱total power requirement 40 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 1,75 x 3,30 x 2,55 m︱
          - Fabr.No.: 107.30.98.040 - control: TNC426 - electronic hand wheel - coolant equipment - Machine ON: 44.128h - Programm ON: 16.480h - Spindle ON: 2.012h
            x-travel 600 mm
            y-travel 450 mm
            z-travel 450 mm
            CNC-control Heidenhain TNC 426
            table-size 850 x 530 mm
            max. table load 400 kg
            spindle taper HSK 63-A
            spindle turning speed range max. 20.000 U/min
            feed stepless max. 15.000 mm/min
            rapid traverse 22 m/min
            drive capacity - spindle motor 12 kW
            tool change unit 30 Pos.
            voltage 400 V
            total power requirement 40 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 1,75 x 3,30 x 2,55 m
            Description :
            - Fabr.No.: 107.30.98.040
            - control: TNC426
            - electronic hand wheel
            - coolant equipment
            - Machine ON: 44.128h
            - Programm ON: 16.480h
            - Spindle ON: 2.012h
          Datasheet
          Request / Contact
          used  Machining Center - Vertical CHIRON FZ 22 S


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19880 · Machining Center - Vertical

          CHIRON - FZ 22 S - - 1992 -

          Technical details
          x-travel 750 mm︱y-travel 520 mm︱z-travel 630 mm︱CNC-control SINUMERIK 810 M ︱table-size 1150 x 570 mm︱max. table load 1200 kg︱spindle taper SK 40 ︱spindle turning speed range 20 - 7100 U/min︱rapid traverse 30 m/min︱drive capacity - spindle motor 18 kW︱tool change unit 20 Pos.︱coolant ︱voltage 380 V︱total power requirement 20 kVA︱weight of the machine ca. 5,0 t︱dimensions of the machine ca. 2,00 x 3,50 x 2,80 m︱
          - Serial No.: T2228092-92 - Control: SIEMENS Sinumerik 810 M - with 4th Axis
            x-travel 750 mm
            y-travel 520 mm
            z-travel 630 mm
            CNC-control SINUMERIK 810 M
            table-size 1150 x 570 mm
            max. table load 1200 kg
            spindle taper SK 40
            spindle turning speed range 20 - 7100 U/min
            rapid traverse 30 m/min
            drive capacity - spindle motor 18 kW
            tool change unit 20 Pos.
            voltage 380 V
            total power requirement 20 kVA
            weight of the machine ca. 5,0 t
            dimensions of the machine ca. 2,00 x 3,50 x 2,80 m
            Description :
            - Serial No.: T2228092-92
            - Control: SIEMENS Sinumerik 810 M
            - with 4th Axis
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HURCO VMX 50 / 40T / ULTIMAX 4


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20251 · Machining Center - Vertical

          HURCO - VMX 50 / 40T / ULTIMAX 4 - - 11/2005 -

          Technical details
          x-travel 1270 mm︱y-travel 660 mm︱z-travel 610 mm︱CNC-control ULTIMAX 4 ︱table-size 1500 x 660 mm︱max. table load 1300 kg︱distance spindle nose and table 150 - 760 mm︱throat 710 mm︱spindle taper SK 40 ︱spindle turning speed range 10 - 10.000 U/min︱drive capacity - spindle motor 15 kVA︱rapid travel x/y/z 30 / 30 / 20 m/min︱tool change unit 24 Pos.︱voltage 400 V︱total power requirement 30 kVA︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 3,25 x 2,35 x 2,95 m︱chip conveyor 3,60 x 0,60 x 1,50 m︱coolant tank 2,10 x 0,80 x 0,25 m︱
          - Serial-No.: M542-06209115GHC - Machine ON: 33.629 h - Control: ULTIMAX 4 - electr. handwheel - Internal coolant supply through spindle 20 bar - chip conveyor
            x-travel 1270 mm
            y-travel 660 mm
            z-travel 610 mm
            CNC-control ULTIMAX 4
            table-size 1500 x 660 mm
            max. table load 1300 kg
            distance spindle nose and table 150 - 760 mm
            throat 710 mm
            spindle taper SK 40
            spindle turning speed range 10 - 10.000 U/min
            drive capacity - spindle motor 15 kVA
            rapid travel x/y/z 30 / 30 / 20 m/min
            tool change unit 24 Pos.
            voltage 400 V
            total power requirement 30 kVA
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 3,25 x 2,35 x 2,95 m
            chip conveyor 3,60 x 0,60 x 1,50 m
            coolant tank 2,10 x 0,80 x 0,25 m
            Description :
            - Serial-No.: M542-06209115GHC
            - Machine ON: 33.629 h
            - Control: ULTIMAX 4
            - electr. handwheel
            - Internal coolant supply
            through spindle 20 bar
            - chip conveyor
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine REFORM RB 50/12


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20448 · Radial Drilling Machine

          REFORM - RB 50/12 - - 2009 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱arm length 1.250 mm︱workpiece height max. 1.250 mm︱spindle taper MT 5 ︱quill stroke 315 mm︱quill feed 0,04 - 3,2 mm/U︱spindle turning speed range 25 - 2000 U/min︱throat min. 350 mm︱throat max. 1.150 mm︱column diameter 350 mm︱voltage 400 V︱total power requirement 6,5 kW︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,05 x 1,00 x 2,70 m︱
          - Serial-No.: 14.352/09 - adjustable cube table 750 x 600 x 550 mm - rapid clamping boring chuck - coolant pump - machine light
            bore capacity in steel (diameter. 50 mm
            arm length 1.250 mm
            workpiece height max. 1.250 mm
            spindle taper MT 5
            quill stroke 315 mm
            quill feed 0,04 - 3,2 mm/U
            spindle turning speed range 25 - 2000 U/min
            throat min. 350 mm
            throat max. 1.150 mm
            column diameter 350 mm
            voltage 400 V
            total power requirement 6,5 kW
            weight of the machine ca. 3,0 t
            dimensions of the machine ca. 2,05 x 1,00 x 2,70 m
            Description :
            - Serial-No.: 14.352/09
            - adjustable cube table
            750 x 600 x 550 mm
            - rapid clamping boring chuck
            - coolant pump
            - machine light
          Datasheet
          Request / Contact
          used  Radial Drilling Machine BERGONZI TR 40 - 1000 H


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20407 · Radial Drilling Machine

          BERGONZI - TR 40 - 1000 H - - 1997 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱arm length 1.000 mm︱workpiece height max. 1.250 mm︱table-size 1.150 x 690 mm︱spindle taper MT 4 ︱spindle turning speed range 40 - 1.400 U/min︱feed range 0,08 - 0,40 mm/min︱crossrail adjustment horizontal 800 mm︱crossrail adjustment vertical 700 mm︱spindle stroke 220 mm︱power requirement 3,5 kW︱coolant ︱voltage 380 V︱total power requirement 4,0 kW︱weight of the machine ca. 1,6 t︱
          - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light
            bore capacity in steel (diameter. 40 mm
            arm length 1.000 mm
            workpiece height max. 1.250 mm
            table-size 1.150 x 690 mm
            spindle taper MT 4
            spindle turning speed range 40 - 1.400 U/min
            feed range 0,08 - 0,40 mm/min
            crossrail adjustment horizontal 800 mm
            crossrail adjustment vertical 700 mm
            spindle stroke 220 mm
            power requirement 3,5 kW
            voltage 380 V
            total power requirement 4,0 kW
            weight of the machine ca. 1,6 t
            Description :
            - Serial-No.: A01/446/97
            - adjustable cube table
            600 x 500 x 500 mm
            - coolant device
            - machine light
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal IBERIMEX MVR Ecomill BF3000 / iTNC530


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20437 · Bed Type Milling Machine - Universal

          IBERIMEX MVR - Ecomill BF3000 / iTNC530 - - 2004 - iTNC 530 HEIDENHAIN

          Technical details
          x-travel 3.000 mm︱y-travel 1.000 mm︱z-travel 1.000 mm︱control iTNC 530 HEIDENHAIN︱table-size 3.230 x 1.050 mm︱table load 8,0 t︱spindle taper ISO 50 ︱tool change unit 24 Pos.︱spindle turning speed range 30 - 3.500 U/min︱drive capacity - spindle motor 25 kW︱feed stepless 1 - 5.000 mm/min︱rapid traverse 10,0 m/min︱chip conveyor Spiralförderer ︱voltage 380 V︱total power requirement 35 kVA︱weight of the machine ca. 12,0 t︱dimensions of the machine ca. 7,40 x 3,65 x 2,75 m︱hydraulic power unit 1,40 x 0,50 x 0,60 m︱ 0,45 x 0,70 x 0,85 m︱
          - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed
            x-travel 3.000 mm
            y-travel 1.000 mm
            z-travel 1.000 mm
            control iTNC 530 HEIDENHAIN
            table-size 3.230 x 1.050 mm
            table load 8,0 t
            spindle taper ISO 50
            tool change unit 24 Pos.
            spindle turning speed range 30 - 3.500 U/min
            drive capacity - spindle motor 25 kW
            feed stepless 1 - 5.000 mm/min
            rapid traverse 10,0 m/min
            chip conveyor Spiralförderer
            voltage 380 V
            total power requirement 35 kVA
            weight of the machine ca. 12,0 t
            dimensions of the machine ca. 7,40 x 3,65 x 2,75 m
            hydraulic power unit 1,40 x 0,50 x 0,60 m
            0,45 x 0,70 x 0,85 m
            Description :
            - Serial No.: VH-30041
            - Maschine ON 23.724 h
            - Spindel ON 7.968 h
            - CNC-Control: iTNC 530 HEIDENHAIN
            - Universal Milling Head (Huron-Type), manual
            - 2x Screw type chip conveyor at front and back of table
            - Oil chiller unit
            - Y-Axis guitde ways with new TURCITE
            - Ball screws and bearings in X/Y/Z axis renewed
          Datasheet
          Request / Contact

          Copy Milling Machine - Vertical

          used  Copy Milling Machine - Vertical ELUMATEC AS170/00


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19970 · Copy Milling Machine - Vertical

          ELUMATEC - AS170/00 - - 1998 -

          Technical details
          x-travel 300 mm︱y-travel 120 mm︱z-travel 105 mm︱ratio of pantograph 1:1 ︱clamping table 540 x 100 mm︱spindle turning speed range 12.000 U/min︱voltage 230 V︱total power requirement 0,74 kW︱weight of the machine ca. 178 kg︱dimensions of the machine ca. 0,80 x 0,80 x 1,50 m︱chasis
          1-SPINDLE COPY MILLING MACHINE / HAND LEVER MILLING MACHINE ELUMATEC AS 170/00 milling area horizontal after stop 300 x 120 mm Milling area horizontal according to copy template 290 x 110 mm Copy milling according to stops or template in ratio 1:1 Pneumatic copying pin two-stage for two different cutter diameters Table height adjustment for high profiles up to 400 mm Pneumatic material clamping device
            x-travel 300 mm
            y-travel 120 mm
            z-travel 105 mm
            ratio of pantograph 1:1
            clamping table 540 x 100 mm
            spindle turning speed range 12.000 U/min
            voltage 230 V
            total power requirement 0,74 kW
            weight of the machine ca. 178 kg
            dimensions of the machine ca. 0,80 x 0,80 x 1,50 m
            Description :
            1-SPINDLE COPY MILLING MACHINE /
            HAND LEVER MILLING MACHINE ELUMATEC AS 170/00

            milling area horizontal after stop 300 x 120 mm
            Milling area horizontal according to copy template 290 x 110 mm
            Copy milling according to stops or template in ratio 1:1

            Pneumatic copying pin two-stage
            for two different cutter diameters
            Table height adjustment for high profiles up to 400 mm
            Pneumatic material clamping device
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal AVIA FNE 40P


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-20479 · Tool Room Milling Machine - Universal

          AVIA - FNE 40P - - 2008 -

          Technical details
          x-travel 620 mm︱y-travel 420 mm︱z-travel 400 mm︱digital readout 3 Achsen HEIDENHAIN︱spindle taper ISO 40 DIN 69871A︱spindle turning speed range 50 - 4000 U/min︱table-size 800 x 400 mm︱table load 400 kg︱feeds -stepless- max. 2000 mm/min︱rapid traverse 5 / 4 m/min︱power capacity - milling spindle (S1) 10,5 kW︱quill stroke 80 mm︱coolant ︱voltage 400 V︱total power requirement 17,5 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 2,00 x 2,76 x 2,05 m︱
          - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - stepless speed control - stepless feed drives - electr. handwheel - mechanical handwheels - horizontal milling spindle - coolant device
            x-travel 620 mm
            y-travel 420 mm
            z-travel 400 mm
            digital readout 3 Achsen HEIDENHAIN
            spindle taper ISO 40 DIN 69871A
            spindle turning speed range 50 - 4000 U/min
            table-size 800 x 400 mm
            table load 400 kg
            feeds -stepless- max. 2000 mm/min
            rapid traverse 5 / 4 m/min
            power capacity - milling spindle (S1) 10,5 kW
            quill stroke 80 mm
            voltage 400 V
            total power requirement 17,5 kW
            weight of the machine ca. 1,9 t
            dimensions of the machine ca. 2,00 x 2,76 x 2,05 m
            Description :
            - Serial-No.: 90395
            - Digital display HEIDENHAIN ND780
            - stepless speed control
            - stepless feed drives
            - electr. handwheel
            - mechanical handwheels
            - horizontal milling spindle
            - coolant device
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Perfil del comerciante: Kirchgeorg Werkzeugmaschinen
          Ltd.

          Contactar con el comerciante



            máquinas herramientas Kirchgeorg
          Ltd.

           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Alemania
            0049-(0)-6103-9909-0">0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de

          Perfil del comerciante


          Kirchgeorg Werkzeugmaschinen GmbH fue fundada en 1919 en Erfurt, Turingia por el ingeniero Paul Kirchgeorg, y es uno de los concesionarios de máquinas herramienta nuevos y usados ​​más antiguos de Alemania.

          Kirchgeorg comenzó como representante y distribuidor de maquinaria para trabajar el metal y la madera, y rápidamente convirtió a la compañía en un servicio completo de maquinistas pesados ​​y maquinarias de máquinas usadas y concesionarios de equipos.

          En 1953, como resultado de los intentos de expropiación del gobierno de Alemania del Este, Kirchgeorg reubicó la compañía en Fulda, Hesse, en Alemania Occidental. En 1953 y 1960 se le unieron sus hijos, Harro y Reiner, respectivamente, y la compañía entró en otra fase de expansión.

          En 1960, los primeros edificios se construyeron en nuestra ubicación actual en Dreieich y desde entonces han crecido para incluir un piso de exhibición de 3,000 + metro cuadrado. 

          Con Thomas Kirchgeorg, Ingeniero Industrial, uniéndose a la compañía en 2003, nos complace decir que nuestra empresa familiar está en su tercera generación. 

          Hoy en día, ofrecemos más que 600 nuevas y usadas máquinas herramientas en exhibición en Dreieich. Además de la distribución mundial, ofrecemos asesoramiento individualizado, experto y un servicio completo. También podemos ayudarlo a obtener financiamiento, transporte, instalación e instrucción.

          En nuestras instalaciones de producción, todas las máquinas usadas están totalmente reacondicionadas, probadas exhaustivamente y tienen garantía. También fabricamos piezas de repuesto, engranajes, cremalleras y otros módulos de actuación.

          Nuestra subsidiaria, NASSOVIA Maschinenservice GmbH, ha estado brindando un servicio autorizado para máquinas EDM Schiess-Nassovia Cavity Sinking desde 1992.

          Somos miembros de la Asociación Alemana de Máquinas y Mayoristas de Máquina-Herramienta (FDM).

          Nuestro almacén 3000 m2

          Estamos más que encantados de ayudarle con cualquier pregunta. Esperamos con interés escuchar de usted. 
           

          Administración

          Teléfono
          Thomas Kirchgeorg+49 (6103) 9909-23

          Ventas

          Teléfono
          Norbert Dick+49 (6103) 9909-14

          Dirección de ventas de producción.

          Teléfono
          Matthias Goy+49 (6103) 9909-27

          Tecnica de produccion administración

          Teléfono
          Gerd Brandt+49 (6103) 9909-17

          Contabilidad

          Teléfono
          Maria kelbler+49 (6103) 9909-18

          Recepción

          Teléfono
          André Milbradt+49 (6103) 9909-0

          Webmaster
          Thomas Kirchgeorg

          NASSOVIA Machine Service GmbH

          Teléfono
          Hans Becker+ 49 (6103) 322693
          KIRCHGEORG
          Machine Tools GmbH

          Frankfurterstrasse 141
          D-63303 Dreieich

          Teléfono + 49 (6103) 9909-0
          Fax + 49 (6103) 9909-50
          E-Mail info@kirchgeorg.de

          Horas de trabajo:
          Lunes a jueves 7.30-16.30 CET
          Viernes 7.30-15.30 CET




          Kirchgeorg Werkzeugmaschinen GmbH  63303 - Dreieich-Sprendlingen Frankfurter Straße 141 Deutschland
          Kirchgeorg Werkzeugmaschinen GmbH

          Frankfurter Straße 141



          Contact Trader


            Kirchgeorg Werkzeugmaschinen GmbH
           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Deutschland
            0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de
            Contact person:
          Sehr geehrter Herr Thomas Kirchgeorg 0049-(0)-6103-9909-23
          Sehr geehrter Herr Norbert Dick 0049-(0)-6103-9909-14

           




          Machine category


          Abkantpresse - hydraulisch · Absauggerät · Anreißplatte · Aufspannwinkel · Ausdrehkopf · Ausklinkmaschine · Auswuchtmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrautomat · Bohrerschleifmaschine · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge · Dornrohrbiegemaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Eckverbindungsmaschinen · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Futter · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Hebegeräte · Hydraulische - Tafelschere · Hydraulische Presse · Härteofen · Kaltkreissäge · Kolbenkompressor · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Kopierfräsmaschine - vertikal · Leit- und Zugspindeldrehmaschine · Lötanlage · Magnetspannplatte · Mechanikerdrehbank · Planscheibe · Plasmaschneidegerät · Profil- Ring- Biegemaschine · Profilprojektor · Radialbohrmaschine · Richtplatte · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundtisch · Räummaschine - Innen - Vertikal · Sandstrahlanlage · Schleifbock · Schraubenkompressor · Schraubstock · Schutzgasschweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Senkerodiermaschine · Stangenlader · Staubabsaugung · Stoßmaschine - Vertikal · Stähleschleifmaschine · Säulenbohrmaschine · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Topfschleifmaschine · Tuschierpresse · Werkbank · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Würfeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnstangenfräser · Zahnstangenfräsmaschine · Zentrifuge · Zentrumschleifmaschine · Zubehör/Sonstiges ·