,
Red europea de distribuidores de maquinaria de almacenamiento.
+49 (0) 2389 5299080
Servicio de busqueda Vender maquinas usadas

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:
             Vista 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2023

          Kemmerich Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe TOS-CELAKOVICE SU 125 x 2000

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19927 · Center Lathe

          TOS-CELAKOVICE - SU 125 x 2000 - - 1986 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 940 mm︱turning length 2000 mm︱centre height 625 mm︱centre distance 2000 mm︱spindle bore 102 mm︱spindle turning speed range 1,8 - 355 U/min︱feeds - longitudinal 0,08 - 56 mm/U︱feeds - cross 0,026 - 18 mm/U︱feed range upper carriage 0,026 - 18 mm/U︱rapid traverse 3,6 m/min︱cross slide travel 530 mm︱upper slide travel 340 mm︱max. workpiece weight between centres 5000 kg︱workpiece weight max. 6000 kg︱dia. of leadscrew 65 mm︱lead of leadscrew 12 mm︱thread - mm pitch 1 - 112 mm︱thread - inch 28 - 1/4 Gg/"︱thread - module 0,5 - 28 ︱
          - Faceplate 1200 mm - 4-fold steel holder - steady rest - rapid traverse in support, feed in upper support - motorized tailstock
            turning diameter over bed 1250 mm
            turning diameter over slide rest 940 mm
            turning length 2000 mm
            centre height 625 mm
            centre distance 2000 mm
            spindle bore 102 mm
            spindle turning speed range 1,8 - 355 U/min
            feeds - longitudinal 0,08 - 56 mm/U
            feeds - cross 0,026 - 18 mm/U
            feed range upper carriage 0,026 - 18 mm/U
            rapid traverse 3,6 m/min
            cross slide travel 530 mm
            upper slide travel 340 mm
            max. workpiece weight between ce. 5000 kg
            workpiece weight max. 6000 kg
            dia. of leadscrew 65 mm
            lead of leadscrew 12 mm
            thread - mm pitch 1 - 112 mm
            thread - inch 28 - 1/4 Gg/"
            thread - module 0,5 - 28
            Description :
            - Faceplate 1200 mm
            - 4-fold steel holder
            - steady rest
            - rapid traverse in support, feed in upper support
            - motorized tailstock
          Datasheet
          Request / Contact
          used Center Lathe LEINEN DLZ 140

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19541 · Center Lathe

          LEINEN - DLZ 140 - - 197 -

          Technical details
          turning diameter over bed 280 mm︱turning diameter over slide - mm︱turning length 500 mm︱spindle bore diameter 28 mm︱turning speed range 15 - 3100 U/min︱feeds - longitudinal 0,016 - 1,14 mm/U︱feeds - cross 0,002 - 0,18 mm/U︱thread - inch 112 - 4 inch.︱thread - mm pitch 0,2 - 7 mm︱centre height 140 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,5 x 0,6 x 1,2 m︱
          - Forkhardt 3-jaw Chuck F 160 - Chuck guard - Lamp - Tailstock MK 3 - change gears - div tool holders, steels, tailstock tips - collet chuck
            turning diameter over bed 280 mm
            turning diameter over slide - mm
            turning length 500 mm
            spindle bore diameter 28 mm
            turning speed range 15 - 3100 U/min
            feeds - longitudinal 0,016 - 1,14 mm/U
            feeds - cross 0,002 - 0,18 mm/U
            thread - inch 112 - 4 inch.
            thread - mm pitch 0,2 - 7 mm
            centre height 140 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,5 x 0,6 x 1,2 m
            Description :
            - Forkhardt 3-jaw Chuck F 160
            - Chuck guard
            - Lamp
            - Tailstock MK 3
            - change gears
            - div tool holders, steels, tailstock tips
            - collet chuck
          Datasheet
          Request / Contact
          used Center Lathe WOHLENBERG W 50 x 6000

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19914 · Center Lathe

          WOHLENBERG - W 50 x 6000 - - 1962/2015 -

          Technical details
          turning diameter over bed 1120 mm︱turning diameter over slide 800 mm︱turning length 6000 mm︱center height over square guideway 535 mm︱spindle bore diameter 80 mm︱feeds - longitudinal 24n:2,35-0,0475 mm/U︱feeds - cross 24n:1,18-0,0235 mm/U︱turning speed range 12n: 18-224 U/min︱total power requirement kW︱weight of the machine ca. 28 t︱dimensions of the machine ca. 11 x 1,7 x 2,2 m︱ ︱ ︱
          Overhauled in 2015 and since then only sporadically in use - Faceplate - chuck guard - 2 steady rests - Tailstock
            turning diameter over bed 1120 mm
            turning diameter over slide 800 mm
            turning length 6000 mm
            center height over square guidew. 535 mm
            spindle bore diameter 80 mm
            feeds - longitudinal 24n:2,35-0,0475 mm/U
            feeds - cross 24n:1,18-0,0235 mm/U
            turning speed range 12n: 18-224 U/min
            weight of the machine ca. 28 t
            dimensions of the machine ca. 11 x 1,7 x 2,2 m
            Description :
            Overhauled in 2015 and since then only sporadically in use
            - Faceplate
            - chuck guard
            - 2 steady rests
            - Tailstock
          Datasheet
          Request / Contact

          CNC Lathe

          used CNC Lathe DOOSAN PUMA GT 2100

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19544 · CNC Lathe

          DOOSAN - PUMA GT 2100 - - 2021 - Siemens 828D

          Technical details
          turning diameter 390 mm︱turning length 562 mm︱control Siemens 828D ︱turning diameter over bed 600 mm︱turning diameter over bed slide 390 mm︱x-travel 230 mm︱ 580 mm︱rapid travel x/y/z 24/-/30 m/min︱main spindle speeds: 4500 ︱spindle motor 18,5 / 15 kW︱max. torque on the spindle 313 Nm︱spindle bore 76 mm︱tailstock adjustment 580 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 80 mm︱total power requirement 29 kVA︱weight of the machine ca. 3,7 t︱dimensions of the machine ca. 2,95 x 1,65 x 1,7 m︱
          equipped with: - CNC control Siemens 828D - 3-jaw chuck dia 254mm - tool turret 12-fold - tailstock - coolant system only approx. 710 running hours
            turning diameter 390 mm
            turning length 562 mm
            control Siemens 828D
            turning diameter over bed 600 mm
            turning diameter over bed slide 390 mm
            x-travel 230 mm
            580 mm
            rapid travel x/y/z 24/-/30 m/min
            main spindle speeds: 4500
            spindle motor 18,5 / 15 kW
            max. torque on the spindle 313 Nm
            spindle bore 76 mm
            tailstock adjustment 580 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 80 mm
            total power requirement 29 kVA
            weight of the machine ca. 3,7 t
            dimensions of the machine ca. 2,95 x 1,65 x 1,7 m
            Description :
            equipped with:
            - CNC control Siemens 828D
            - 3-jaw chuck dia 254mm
            - tool turret 12-fold
            - tailstock
            - coolant system

            only approx. 710 running hours
          Datasheet
          Request / Contact
          used CNC Lathe DOOSAN PUMA 3100

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19981 · CNC Lathe

          DOOSAN - PUMA 3100 - - 2015 - FANUC

          Technical details
          turning diameter 525 mm︱turning length 790 mm︱control FANUC ︱travel -x axis 293 mm︱travel -z axis 830 mm︱rapid travel - longitudinal/face 30 m/min︱c-axis 20 min-¹︱spindle bore diameter 115 mm︱spindle drive 22 kW︱spindle speed: 2800 min-¹︱Grinding Spindle Length 10 ︱total power requirement 42,4 kW︱weight of the machine ca. 5900 t︱dimensions of the machine ca. 3.9 x 2.1 x 2.1 m︱
          - C-Axis - Control FANUC i-Serie - Tool Revolver 10-fold - Swarf conveyor - Coolant - Chuck dia 305mm
            turning diameter 525 mm
            turning length 790 mm
            control FANUC
            travel -x axis 293 mm
            travel -z axis 830 mm
            rapid travel - longitudinal/face 30 m/min
            c-axis 20 min-¹
            spindle bore diameter 115 mm
            spindle drive 22 kW
            spindle speed: 2800 min-¹
            Grinding Spindle Length 10
            total power requirement 42,4 kW
            weight of the machine ca. 5900 t
            dimensions of the machine ca. 3.9 x 2.1 x 2.1 m
            Description :
            - C-Axis
            - Control FANUC i-Serie
            - Tool Revolver 10-fold
            - Swarf conveyor
            - Coolant
            - Chuck dia 305mm
          Datasheet
          Request / Contact
          used CNC Lathe DMG GILDEMEISTER CTX Beta 500

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19800 · CNC Lathe

          DMG GILDEMEISTER - CTX Beta 500 - - 2014/2022 - SIEMENS 840 D

          Technical details
          swing diameter 700 mm︱ 400 mm︱turning length 675 mm︱control SIEMENS 840 D ︱x-axis 300 mm︱z-axis 550 mm︱ ︱ 34 / 25 kW︱turning speeds 20 - 5000 U/min︱ 380 / 280 Nm︱spindle head 170H5 ︱ 67 mm︱spindle diameter in front bearing 130 mm︱ ︱tool numbers 12 ︱power capacity - milling spindle 10 kW︱ 36 Nm︱ 6000 min/-1︱ ︱tailstock travel 500 mm︱
          - CNC control Siemens 840D with CELOS and ShopTurn - C & Y axis (+/- 60 mm) - 12-fold turret with driven tools (VDI 40) - Chuck 320mm - chip conveyor 10,500h running hours and 2650h spindle hours New spindle in 2022- since about 100h spindle hours
            swing diameter 700 mm
            400 mm
            turning length 675 mm
            control SIEMENS 840 D
            x-axis 300 mm
            z-axis 550 mm
            34 / 25 kW
            turning speeds 20 - 5000 U/min
            380 / 280 Nm
            spindle head 170H5
            67 mm
            spindle diameter in front bearin. 130 mm
            tool numbers 12
            power capacity - milling spindle 10 kW
            36 Nm
            6000 min/-1
            tailstock travel 500 mm
            Description :
            - CNC control Siemens 840D with CELOS and ShopTurn
            - C & Y axis (+/- 60 mm)
            - 12-fold turret with driven tools (VDI 40)
            - Chuck 320mm
            - chip conveyor


            10,500h running hours and 2650h spindle hours
            New spindle in 2022- since about 100h spindle hours
          Datasheet
          Request / Contact
          used CNC Lathe MAZAK Multiplex 6300-II Y

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19864 · CNC Lathe

          MAZAK - Multiplex 6300-II Y - - 2014 - Mazatrol Matrix II

          Technical details
          Turning diameter 330/430 mm︱Turning length 225 mm︱Distance between spindle heads 1450 mm︱Control Mazatrol Matrix II ︱Spindle bore diameter 77 mm︱Movement X-axis 310 mm︱Movement Y-axis +/- 77 mm︱Movement Z-axis 605 mm︱Spindle Speed 35 - 4000 1/min︱Spindle nose JIS A2-8 ︱Spindle motor 22/19.5 kW︱C-Axis indexing 0,001 °︱Number of turrets 2 ︱Number of tools on turret 12 / 12 ︱Number of driven tools 12 / 12 ︱Spindle speed driven tools 21 - 4000 1/min︱work piece power 7,5 kW︱total power requirement 87 kVa︱Required floor space mm︱Length 7,7 mm︱
          equipped with: - CNC control Mazatrol Matrix II - gantry loader GL 200 F - Y-axis - air blowing device - chip conveyor - Cylinder and polar interpolation (EIA) - Power chuck Kitagawa B 210 - 6 turning holders, 6 boring bar holders, 2 axial milling&drilling heads, 2 radial milling & boring heads machine has 29000h operating hours, Power On 43750h
            Turning diameter 330/430 mm
            Turning length 225 mm
            Distance between spindle heads 1450 mm
            Control Mazatrol Matrix II
            Spindle bore diameter 77 mm
            Movement X-axis 310 mm
            Movement Y-axis +/- 77 mm
            Movement Z-axis 605 mm
            Spindle Speed 35 - 4000 1/min
            Spindle nose JIS A2-8
            Spindle motor 22/19.5 kW
            C-Axis indexing 0,001 °
            Number of turrets 2
            Number of tools on turret 12 / 12
            Number of driven tools 12 / 12
            Spindle speed driven tools 21 - 4000 1/min
            work piece power 7,5 kW
            total power requirement 87 kVa
            Length 7,7 mm
            Description :
            equipped with:
            - CNC control Mazatrol Matrix II
            - gantry loader GL 200 F
            - Y-axis
            - air blowing device
            - chip conveyor
            - Cylinder and polar interpolation (EIA)
            - Power chuck Kitagawa B 210
            - 6 turning holders, 6 boring bar holders, 2 axial milling&drilling heads, 2
            radial milling & boring heads

            machine has 29000h operating hours, Power On 43750h
          Datasheet
          Request / Contact
          used CNC Lathe DMG GILDEMEISTER CTX ALPHA 500

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19803 · CNC Lathe

          DMG GILDEMEISTER - CTX ALPHA 500 - - 2011 - SIEMENS 840 D

          Technical details
          swing diameter 500 mm︱swing diameter above cross guideway 200 mm︱turning length 500 mm︱control SIEMENS 840 D ︱x-axis 190 mm︱z-axis 525 mm︱Main spindle: ︱power capacity - main spindel 14/13 kW︱turning speeds 20 - 6000 U/min︱Torque 192/172 Nm︱spindle head 140H5 ︱Bar feed 52 mm︱spindle diameter in front bearing 100 mm︱turret: ︱tool numbers 12 ︱Shank diameter 30 mm︱power capacity - milling spindle 5.4 kW︱Torque 18 Nm︱tool spindle speed range 5000 min/-1︱Clamping diameter milling tools 25 mm︱
          4 axes CNC lathe - CNC control Siemens 840D solutionline with CELOS and ShopTurn 3G - main & counter spindle - C- & Y-axis (+/- 40 mm) - 12-axis turret with driven tools (VDI 30) - Hainbuch chuck - chip conveyor with 6 motorized tools and a lot of tooling 37800h running hours and 19800 spindle hours
            swing diameter 500 mm
            swing diameter above cross guide. 200 mm
            turning length 500 mm
            control SIEMENS 840 D
            x-axis 190 mm
            z-axis 525 mm
            power capacity - main spindel 14/13 kW
            turning speeds 20 - 6000 U/min
            Torque 192/172 Nm
            spindle head 140H5
            Bar feed 52 mm
            spindle diameter in front bearin. 100 mm
            tool numbers 12
            Shank diameter 30 mm
            power capacity - milling spindle 5.4 kW
            Torque 18 Nm
            tool spindle speed range 5000 min/-1
            Clamping diameter milling tools 25 mm
            Description :
            4 axes CNC lathe
            - CNC control Siemens 840D solutionline with CELOS and ShopTurn 3G
            - main & counter spindle
            - C- & Y-axis (+/- 40 mm)
            - 12-axis turret with driven tools (VDI 30)
            - Hainbuch chuck
            - chip conveyor

            with 6 motorized tools and a lot of tooling
            37800h running hours and 19800 spindle hours
          Datasheet
          Request / Contact
          used CNC Lathe MAZAK Quick Turn 250L

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19744 · CNC Lathe

          MAZAK - Quick Turn 250L - - 11/2021 - Mazatrol Smooth C

          Technical details
          Turning diameter 380 mm︱Swing over bed . mm︱Turning length 500 mm︱Spindle bore diameter 80 mm︱Movement X-axis 225 mm︱Movement Z-axis 560 mm︱Spindle Speed 4000 1/min︱Spindle motor 18,5 kW︱Number of tools on turret 12 ︱Tool Taper angetrieben ︱work piece power 5,5 kW︱milling head speed 5000 U/min︱Control Mazatrol Smooth C ︱tailstock quill taper MT MK 5 ︱total power requirement 40,6 kVA︱Weight 4,9 t︱
          In Production since 3/2022 equipped with: - CNC control Mazak Smooth C - Tool turret 12-fold (driven tools) - counterholder - Chip Conveyor Machine Power-on: 1600h - Worked: ca 600h
            Turning diameter 380 mm
            Swing over bed . mm
            Turning length 500 mm
            Spindle bore diameter 80 mm
            Movement X-axis 225 mm
            Movement Z-axis 560 mm
            Spindle Speed 4000 1/min
            Spindle motor 18,5 kW
            Number of tools on turret 12
            Tool Taper angetrieben
            work piece power 5,5 kW
            milling head speed 5000 U/min
            Control Mazatrol Smooth C
            tailstock quill taper MT MK 5
            total power requirement 40,6 kVA
            Weight 4,9 t
            Description :
            In Production since 3/2022
            equipped with:
            - CNC control Mazak Smooth C
            - Tool turret 12-fold (driven tools)
            - counterholder
            - Chip Conveyor
            Machine Power-on: 1600h - Worked: ca 600h

          Datasheet
          Request / Contact
          used CNC Lathe DOOSAN PUMA GT 2100

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19982 · CNC Lathe

          DOOSAN - PUMA GT 2100 - - 10/2013 - Fanuc I-Series

          Technical details
          turning diameter 390 mm︱turning length 562 mm︱control Fanuc I-Series ︱turning diameter over bed 600 mm︱turning diameter over bed slide 390 mm︱x-travel 230 mm︱ 580 mm︱rapid travel x/y/z 24/-/30 m/min︱main spindle speeds: 4500 ︱spindle motor 18,5 / 15 kW︱max. torque on the spindle 313 Nm︱spindle bore 76 mm︱tailstock adjustment 580 mm︱tailstock quill diameter 80 mm︱tailstock quill stroke 80 mm︱total power requirement 29 kVA︱weight of the machine ca. 3,7 t︱dimensions of the machine ca. 2,95 x 1,65 x 1,7 m︱
          equipped with: - CNC control Fanuc i-Series - 3-jaw chuck dia 254mm - tool turret 12-fold - tailstock - coolant system
            turning diameter 390 mm
            turning length 562 mm
            control Fanuc I-Series
            turning diameter over bed 600 mm
            turning diameter over bed slide 390 mm
            x-travel 230 mm
            580 mm
            rapid travel x/y/z 24/-/30 m/min
            main spindle speeds: 4500
            spindle motor 18,5 / 15 kW
            max. torque on the spindle 313 Nm
            spindle bore 76 mm
            tailstock adjustment 580 mm
            tailstock quill diameter 80 mm
            tailstock quill stroke 80 mm
            total power requirement 29 kVA
            weight of the machine ca. 3,7 t
            dimensions of the machine ca. 2,95 x 1,65 x 1,7 m
            Description :
            equipped with:
            - CNC control Fanuc i-Series
            - 3-jaw chuck dia 254mm
            - tool turret 12-fold
            - tailstock
            - coolant system

          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used CNC Lathe - Inclined Bed Type DOOSAN Puma TT 2500SY

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20142 · CNC Lathe - Inclined Bed Type

          DOOSAN - Puma TT 2500SY - - 2013 - FAnuc 31i-A

          Technical details
          turning diameter 390 mm︱turning length 350 mm︱control FAnuc 31i-A ︱ 255 / 390 mm︱ 86 mm︱spindle nose A2-8 ︱chucking diameter 255 mm︱bar capacity 76 mm︱vertical Stroke 4000 1/min︱ 26/22 kW︱ 255 / 190 mm︱Press Height 120 (+/- 60) mm︱Movement X2 / Z2 - Axis 800 / 900 mm︱2nd Spindle: 810 mm︱Feeds (X,z,u,w-axis) 0,001 °︱ 2 ︱transverse stroke 12 / 12 x︱ 12 / 12 x︱Sub Spindle 5000 1/min︱ 7,5 kW︱
          equipped with: - CNC control Fanuc 31i-A - Main & counter spindle - Two-spindle turret with 12 tool stations each (driven) - Chip conveyor - High-pressure pump 40 bar, paper filter and cooling lubricant unit - Tool button - Automatic door - Steady rest on tool holder (half steady rest)
            turning diameter 390 mm
            turning length 350 mm
            control FAnuc 31i-A
            255 / 390 mm
            86 mm
            spindle nose A2-8
            chucking diameter 255 mm
            bar capacity 76 mm
            vertical Stroke 4000 1/min
            26/22 kW
            255 / 190 mm
            Press Height 120 (+/- 60) mm
            Movement X2 / Z2 - Axis 800 / 900 mm
            2nd Spindle: 810 mm
            Feeds (X,z,u,w-axis) 0,001 °
            2
            transverse stroke 12 / 12 x
            12 / 12 x
            Sub Spindle 5000 1/min
            7,5 kW
            Description :
            equipped with:
            - CNC control Fanuc 31i-A
            - Main & counter spindle
            - Two-spindle turret with 12 tool stations each (driven)
            - Chip conveyor
            - High-pressure pump 40 bar, paper filter and cooling lubricant unit
            - Tool button
            - Automatic door
            - Steady rest on tool holder (half steady rest)
          Datasheet
          Request / Contact
          used CNC Lathe - Inclined Bed Type SPINNER PD 400 C/S CNC

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19147 · CNC Lathe - Inclined Bed Type

          SPINNER - PD 400 C/S CNC - - 2004/2022 - Fanuc 18 iTB

          Technical details
          turning diameter 120 mm︱turning length 380 mm︱control Fanuc 18 iTB ︱max. swing diameter 300 mm︱ ︱ 8000 min/-1︱ 7,5 kW︱ 26 Nm︱spindle nose 100 mm︱spindle passage 32 mm︱A-Axis ︱ 8000 min/-1︱ 5,5 kW︱ 23 Nm︱spindle nose 100 mm︱spindle passage 32 mm︱ ︱ 12 pos.︱tool taper VDI 16 ︱Sub Spindle ︱
          2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC Keyboard CNC - Ultra precision turning centre (X-, Z-, E-, C-Axe) - CNC control Fanuc 18iTB - Main and counter spindle - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Various tool holders Control On: 24000h
            turning diameter 120 mm
            turning length 380 mm
            control Fanuc 18 iTB
            max. swing diameter 300 mm
            8000 min/-1
            7,5 kW
            26 Nm
            spindle nose 100 mm
            spindle passage 32 mm
            8000 min/-1
            5,5 kW
            23 Nm
            spindle nose 100 mm
            spindle passage 32 mm
            12 pos.
            tool taper VDI 16
            Description :
            2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC
            Keyboard

            CNC - Ultra precision turning centre (X-, Z-, E-, C-Axe)
            - CNC control Fanuc 18iTB
            - Main and counter spindle
            - SAUTER tool turret 16-fold (0.5.480.510) VDI 16
            - Linear tool slide
            - automatic doors
            - Chip tray
            - Coolant system with fine filter (high Pressure Pump)
            - 3 jaw chucks
            - Various clamping devices/pressure collets
            - Various tool holders

            Control On: 24000h
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used CNC Turning- and Milling Center SMEC SL 2500 BLM

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19997 · CNC Turning- and Milling Center

          SMEC - SL 2500 BLM - - 5/2021 - Fanuc Oi-TF plus

          Technical details
          Swing over bed/front cover 650 mm︱Momentum over lateral guidance 480 ︱turning length 1020 mm︱turning diameter 405 mm︱bar material dia. 76 mm︱control Fanuc Oi-TF plus ︱x-axis 245 mm︱z-axis 1040 mm︱main spindle: ︱max. turning speeds 3500 min/-1︱drive capacity - main spindle 18,5 / 15 kW︱rapid traverse: ︱rapid traverse ( x / y / z ) 24/-/30 m/min︱tail stock ︱tailstock quill diameter 100 mm︱tailstock quill stroke 110 mm︱tailstock adjustment 970 mm︱total power requirement 31 kVA︱dimensions of the machine ca. 4,88 × 1,61 x 1,93 m︱total wight 6,4 t︱
          equipped with: - CNC control Fanuc Oi-TF plus - driven tools 5000 rpm - tool turret 12-fold (BMT65) - bar feeder, Spacesaver SS 2200 - tailstock - chip conveyor Running hours: 813h
            Swing over bed/front cover 650 mm
            Momentum over lateral guidance 480
            turning length 1020 mm
            turning diameter 405 mm
            bar material dia. 76 mm
            control Fanuc Oi-TF plus
            x-axis 245 mm
            z-axis 1040 mm
            max. turning speeds 3500 min/-1
            drive capacity - main spindle 18,5 / 15 kW
            rapid traverse ( x / y / z ) 24/-/30 m/min
            tailstock quill diameter 100 mm
            tailstock quill stroke 110 mm
            tailstock adjustment 970 mm
            total power requirement 31 kVA
            dimensions of the machine ca. 4,88 × 1,61 x 1,93 m
            total wight 6,4 t
            Description :
            equipped with:
            - CNC control Fanuc Oi-TF plus
            - driven tools 5000 rpm
            - tool turret 12-fold (BMT65)
            - bar feeder, Spacesaver SS 2200
            - tailstock
            - chip conveyor

            Running hours: 813h
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center DOOSAN Lynx 220 LSYC

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19769 · CNC Turning- and Milling Center

          DOOSAN - Lynx 220 LSYC - - 2018 - FANUC 0iTF

          Technical details
          turning diameter 300 mm︱turning length 500 mm︱control FANUC 0iTF ︱greates pass round over bed 600 mm︱Swing dia. over traverse guideway 400 mm︱Main spindle: ︱turning speed range - main spindle 4500 min/-1︱power capacity - main spindel 15 / 11 kW︱bar material dia. 65 mm︱C-Axis 0,001 °︱chucking diameter 210 mm︱turret: ︱number of toolpositions 12 pos.︱driven statition 12 pos.︱Spindle speed - driven tools 5000 min -1︱power capacity - driven tools 3,7 kW︱change time 0,15 sec︱axis stroke: ︱x-axis 205 mm︱z-axis 560 mm︱
          CNC turning/milling centre - CNC control Fanuc 0iTF workshop-oriented programming aid Manual Guide i - C- & Y-axis - Main & counter spindle - 12-position tool turret with driven tools - Bar Feeder SS 2500 - Autom. Tool Setter - Chip Conveyor Operating hours: 3381h
            turning diameter 300 mm
            turning length 500 mm
            control FANUC 0iTF
            greates pass round over bed 600 mm
            Swing dia. over traverse guidewa. 400 mm
            turning speed range - main spind. 4500 min/-1
            power capacity - main spindel 15 / 11 kW
            bar material dia. 65 mm
            C-Axis 0,001 °
            chucking diameter 210 mm
            number of toolpositions 12 pos.
            driven statition 12 pos.
            Spindle speed - driven tools 5000 min -1
            power capacity - driven tools 3,7 kW
            change time 0,15 sec
            x-axis 205 mm
            z-axis 560 mm
            Description :
            CNC turning/milling centre

            - CNC control Fanuc 0iTF workshop-oriented programming aid Manual Guide i
            - C- & Y-axis
            - Main & counter spindle
            - 12-position tool turret with driven tools
            - Bar Feeder SS 2500
            - Autom. Tool Setter
            - Chip Conveyor

            Operating hours: 3381h

          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center DMG MORI NTX 2000 / 1500 SZ

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20081 · CNC Turning- and Milling Center

          DMG MORI - NTX 2000 / 1500 SZ - - 2016 - Fanuc 31I B5

          Technical details
          turning diameter 660 mm︱turning length 1538 mm︱control Fanuc 31I B5 ︱Rapid traverse feeds turret 1 (milling head) x/y/z 40 / 40 / 50 m/min︱RPM milling spindle 12000 1/min︱power capacity - milling spindle 30 / 11 kW︱Spindle 1 RPM 5000 1/min︱Spindle 1 Power 22 / 18,5 kW︱C-axis spindle 1 0,001 °︱Spindle 2 RPM 5000 1/min︱Sub spindle 22 / 18,5 kW︱C-axis spindle 2 0,001 °︱x-axis 495 mm︱y-axis +/- 125 mm︱z-axis 1560 mm︱b-axis +/- 120 °︱x-axis 2: 160 mm︱z-axis 2: 1402 mm︱total power requirement 80,7 kVA︱weight of the machine ca. 15,3 t︱
          6-axis machine (c1, c2, x/x2, y, z/z2, b) equipment: - Control Fanuc 31i B5 mit Celos ErgoLine Touch - Main and counter spindle, each with C-axis and Kitagawa Hollow Chuck Unit - Cross slide on top with milling spindle (HSK A 63) - B-axis - Y-axis +/- 125 mm - 76-cavity tool magazine (HSK 63) - chip conveyor - Coolant unit with paper belt filter 70bar - 10-position WZ turret - Mist Collector - Oil Skimmer - Tool Breakage Detection - Workpiece unloader / workpiece conveyor - Bar Feeder
            turning diameter 660 mm
            turning length 1538 mm
            control Fanuc 31I B5
            Rapid traverse feeds turret 1 (m. 40 / 40 / 50 m/min
            RPM milling spindle 12000 1/min
            power capacity - milling spindle 30 / 11 kW
            Spindle 1 RPM 5000 1/min
            Spindle 1 Power 22 / 18,5 kW
            C-axis spindle 1 0,001 °
            Spindle 2 RPM 5000 1/min
            Sub spindle 22 / 18,5 kW
            C-axis spindle 2 0,001 °
            x-axis 495 mm
            y-axis +/- 125 mm
            z-axis 1560 mm
            b-axis +/- 120 °
            x-axis 2: 160 mm
            z-axis 2: 1402 mm
            total power requirement 80,7 kVA
            weight of the machine ca. 15,3 t
            Description :
            6-axis machine (c1, c2, x/x2, y, z/z2, b)
            equipment:
            - Control Fanuc 31i B5 mit Celos ErgoLine Touch
            - Main and counter spindle, each with C-axis and Kitagawa Hollow Chuck Unit
            - Cross slide on top with milling spindle (HSK A 63)
            - B-axis
            - Y-axis +/- 125 mm
            - 76-cavity tool magazine (HSK 63)
            - chip conveyor
            - Coolant unit with paper belt filter 70bar
            - 10-position WZ turret
            - Mist Collector
            - Oil Skimmer
            - Tool Breakage Detection
            - Workpiece unloader / workpiece conveyor
            - Bar Feeder
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20063 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2014 - Siemens 840D

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5000 min/-1︱power capacity - main spindel 25 /34 kW︱C-Axis 0,0001 °︱spindle diameter 67 mm︱milling spindle ︱milling spindle motor 23 / 13 kW︱milling head speed 18000 U/min︱b-axis +/- 120 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 100 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱feed power 5,6 / 5,6 / 7,4 kN︱
          CNC - Turning and milling center - 5 axes - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter - chip conveyor - Tool changer 24-fold (HSK A63) - Direct measuring system - IKZ 25bar - Tailstock
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5000 min/-1
            power capacity - main spindel 25 /34 kW
            C-Axis 0,0001 °
            spindle diameter 67 mm
            milling spindle motor 23 / 13 kW
            milling head speed 18000 U/min
            b-axis +/- 120 °
            x-axis 490 mm
            y-axis +/- 100 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            feed power 5,6 / 5,6 / 7,4 kN
            Description :
            CNC - Turning and milling center - 5 axes
            - CNC control Siemens 840D Ergo Line with ShopTurn
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device/paper belt filter
            - chip conveyor
            - Tool changer 24-fold (HSK A63)
            - Direct measuring system
            - IKZ 25bar
            - Tailstock
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center OKUMA SpaceTurn LB 3000 EX2 MY

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19723 · CNC Turning- and Milling Center

          OKUMA - SpaceTurn LB 3000 EX2 MY - - 2014 - OSP P300L

          Technical details
          turning diameter 340 mm︱turning length 500 mm︱control OSP P300L ︱turning diameter over bed 580 mm︱turning dia. over face-slide 470 mm︱Workingspindle: ︱power capacity - main spindel 22/15 kW︱turning speed range - main spindle 45 - 5000 U/min︱spindle diameter 120 mm︱spindle bore 80 mm︱max. bar capacity 72 mm︱spindle head JIS A2-6 ︱spindle cone 82 x 2° ︱Torque 350 Nm︱travel -z axis 510 mm︱feed per revolution 0,001 - 1.000 mm︱rapid traverse 30 m/min︱x - axis ︱travel -x axis 260 mm︱feed per revolution 0,001 - 1.000 mm︱
          CNC - Turning and milling centre equipped with: - CNC control OSP P300L - NC tailstock - 12-fold turret with driven tool station (BMT 60) 6000rpm - C, Y-axis - chip conveyor - 3-jaw chuck 250mm - Tool probe
            turning diameter 340 mm
            turning length 500 mm
            control OSP P300L
            turning diameter over bed 580 mm
            turning dia. over face-slide 470 mm
            power capacity - main spindel 22/15 kW
            turning speed range - main spind. 45 - 5000 U/min
            spindle diameter 120 mm
            spindle bore 80 mm
            max. bar capacity 72 mm
            spindle head JIS A2-6
            spindle cone 82 x 2°
            Torque 350 Nm
            travel -z axis 510 mm
            feed per revolution 0,001 - 1.000 mm
            rapid traverse 30 m/min
            travel -x axis 260 mm
            feed per revolution 0,001 - 1.000 mm
            Description :
            CNC - Turning and milling centre
            equipped with:
            - CNC control OSP P300L
            - NC tailstock
            - 12-fold turret with driven tool station (BMT 60) 6000rpm
            - C, Y-axis
            - chip conveyor
            - 3-jaw chuck 250mm
            - Tool probe

          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center DOOSAN-DAEWOO Puma MX 2500 LST

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20092 · CNC Turning- and Milling Center

          DOOSAN-DAEWOO - Puma MX 2500 LST - - 2008 - FANUC 18i TB

          Technical details
          turning diameter 750 mm︱turning length 1520 mm︱control FANUC 18i TB ︱turning diameter over slide 600 mm︱chucking diameter 250 mm︱spindle nose A2 #8 ︱spindle passage 76 mm︱spindle turning speed - stepless 3500 U/min︱spindle drive 26/22 kW︱milling spindle ︱milling spindle drive 15/11 kW︱milling head speed 10.000 U/min︱x-axis 555 mm︱z-axis 1595 / 1640 mm︱y-axis +/- 80 mm︱b-axis 240 °︱speeds of tool 4000 U/min︱work piece power 5,5 kW︱total power requirement 93,93 kVA︱weight of the machine ca. 15,5 t︱
          - CNC control FANUC Series 18i TB - Milling Head (Capto C6) - lower Tool Revolver 12-fold, driven tools 5,5kW - internal spindle coolant 20 bar - ATC for 80 tools - main and sub spindle with C-Axis each - Chip Conveyor - Coolant with paperband filter - many Tools ca 11900h running hours
            turning diameter 750 mm
            turning length 1520 mm
            control FANUC 18i TB
            turning diameter over slide 600 mm
            chucking diameter 250 mm
            spindle nose A2 #8
            spindle passage 76 mm
            spindle turning speed - stepless 3500 U/min
            spindle drive 26/22 kW
            milling spindle drive 15/11 kW
            milling head speed 10.000 U/min
            x-axis 555 mm
            z-axis 1595 / 1640 mm
            y-axis +/- 80 mm
            b-axis 240 °
            speeds of tool 4000 U/min
            work piece power 5,5 kW
            total power requirement 93,93 kVA
            weight of the machine ca. 15,5 t
            Description :
            - CNC control FANUC Series 18i TB
            - Milling Head (Capto C6)
            - lower Tool Revolver 12-fold, driven tools 5,5kW
            - internal spindle coolant 20 bar
            - ATC for 80 tools
            - main and sub spindle with C-Axis each
            - Chip Conveyor
            - Coolant with paperband filter
            - many Tools

            ca 11900h running hours

          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center GILDEMEISTER CTX 410 V 6

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19983 · CNC Turning- and Milling Center

          GILDEMEISTER - CTX 410 V 6 - - 2007 - Siemens 840D pl

          Technical details
          turning diameter 320 mm︱turning length 635 mm︱control Siemens 840D pl ︱spindle bore 87 mm︱swing diameter 505 mm︱swing diameter over face slide 375 mm︱Main Spindle: ︱spindle turning speed - stepless 5000 U/min︱main drive motor 28/21 kW︱spindle bearing diameter 130 mm︱2nd Spindle: ︱Subspindle - speed 6000 U/min︱Subspindle Power 12,6 / 16,2 kW︱spindle bearing diameter 90 mm︱total power requirement 44 kVA︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. 4,4 x 1,8 x 1,8 m︱
          - CNC control Siemens 840D powerLine * Counter spindle * C-axis for main and counter spindle * Y axis 80mm * 12-fold revolver with driven. Watermark on all positions (Vdi 30) * Chip conveyor * Coolant system 55000h switch-on and 24800h spindle hours
            turning diameter 320 mm
            turning length 635 mm
            control Siemens 840D pl
            spindle bore 87 mm
            swing diameter 505 mm
            swing diameter over face slide 375 mm
            spindle turning speed - stepless 5000 U/min
            main drive motor 28/21 kW
            spindle bearing diameter 130 mm
            Subspindle - speed 6000 U/min
            Subspindle Power 12,6 / 16,2 kW
            spindle bearing diameter 90 mm
            total power requirement 44 kVA
            weight of the machine ca. 5,5 t
            dimensions of the machine ca. 4,4 x 1,8 x 1,8 m
            Description :
            - CNC control Siemens 840D powerLine
            * Counter spindle
            * C-axis for main and counter spindle
            * Y axis 80mm
            * 12-fold revolver with driven. Watermark on all positions (Vdi 30)
            * Chip conveyor
            * Coolant system
            55000h switch-on and 24800h spindle hours
          Datasheet
          Request / Contact
          used CNC Turning- and Milling Center MAZAK Multiplex 630

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19615 · CNC Turning- and Milling Center

          MAZAK - Multiplex 630 - - 12/1994 - Mazatrol T-Plus

          Technical details
          turning diameter 560 mm︱turning length 650 mm︱control Mazatrol T-Plus ︱chucking diameter 250 mm︱spindle passage 77 mm︱spindle motor 22 kW︱spindle turning speed range 35 - 3000 U/min︱x-axis 310 mm︱z-axis 605 mm︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. m︱
          - CNC-Control Mazatrol T.Plus - Tool-Revolverstation 2 x 12 - Loadingportal Mazak Flex GL 400N - 2x 3-jaw Chuck Kitagawa B2-10 - Chip Conveyor
            turning diameter 560 mm
            turning length 650 mm
            control Mazatrol T-Plus
            chucking diameter 250 mm
            spindle passage 77 mm
            spindle motor 22 kW
            spindle turning speed range 35 - 3000 U/min
            x-axis 310 mm
            z-axis 605 mm
            weight of the machine ca. 11 t
            Description :
            - CNC-Control Mazatrol T.Plus
            - Tool-Revolverstation 2 x 12
            - Loadingportal Mazak Flex GL 400N
            - 2x 3-jaw Chuck Kitagawa B2-10
            - Chip Conveyor
          Datasheet
          Request / Contact

          Facing Lathe

          used Facing Lathe ZERBST DP 1000

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19195 · Facing Lathe

          ZERBST - DP 1000 - - ca. 1975 -

          Technical details
          faceplate diameter 1000 mm︱turning diameter over slide rest 0 mm︱turning length 0 mm︱turning diameter over bed slide 630 ︱turning dia. in gap 1000 mm︱swing diameter 1250 mm︱spindle turning speed range 5,6 - 250 / 8 - 355 U/min︱main drive 17 kW︱electrics - voltage/frequency 380 / 50 V/Hz︱workpiece weight max. 800 kg︱total power requirement 18,5 kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 4 x 2,5 x 1,5 m︱
          Facing lathe with fixed cross bed Accessories + equipment: - 2 supports/slides with steel holder - hydraulic unit + electric cabinet - Faceplate
            faceplate diameter 1000 mm
            turning diameter over bed slide 630
            turning dia. in gap 1000 mm
            swing diameter 1250 mm
            spindle turning speed range 5,6 - 250 / 8 - 355 U/min
            main drive 17 kW
            electrics - voltage/frequency 380 / 50 V/Hz
            workpiece weight max. 800 kg
            total power requirement 18,5 kW
            weight of the machine ca. 6 t
            dimensions of the machine ca. 4 x 2,5 x 1,5 m
            Description :
            Facing lathe with fixed cross bed
            Accessories + equipment:
            - 2 supports/slides with steel holder
            - hydraulic unit + electric cabinet
            - Faceplate
          Datasheet
          Request / Contact
          used Facing Lathe POREBA TZG 250 A

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19718 · Facing Lathe

          POREBA - TZG 250 A - - 1992 -

          Technical details
          faceplate diameter 2000 mm︱turning diameter over plate 2500 mm︱workpiece width - max. 300 mm︱turning diameter in the pit 3200 mm︱turning speed range - faceplate 0,5 - 100 U/min︱feed range 800 mm/min︱steel cross cut max. 70 x 70 mm²︱spindle bore 105 mm︱spindle diameter in front bearing 320 mm︱headstock travel cross 1000 mm︱max. workpiece weight between centers 25000 kg︱max. workpiece weight -without tailstock 6000 kg︱cross slide - travel 450 mm︱upper slide-adjustment 700 mm︱total power requirement 35 kW︱weight of the machine ca. 20 t︱
          - Digital Read Out - Chip Conveyor - Hydr. Copy Attachment
            faceplate diameter 2000 mm
            turning diameter over plate 2500 mm
            workpiece width - max. 300 mm
            turning diameter in the pit 3200 mm
            turning speed range - faceplate 0,5 - 100 U/min
            feed range 800 mm/min
            steel cross cut max. 70 x 70 mm²
            spindle bore 105 mm
            spindle diameter in front bearin. 320 mm
            headstock travel cross 1000 mm
            max. workpiece weight between ce. 25000 kg
            max. workpiece weight -without t. 6000 kg
            cross slide - travel 450 mm
            upper slide-adjustment 700 mm
            total power requirement 35 kW
            weight of the machine ca. 20 t
            Description :

            - Digital Read Out
            - Chip Conveyor
            - Hydr. Copy Attachment
          Datasheet
          Request / Contact

          Hardturning & Grinding Center

          used Hardturning & Grinding Center BUDERUS CNC 235 DH-I-T-SL

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18522 · Hardturning & Grinding Center

          BUDERUS - CNC 235 DH-I-T-SL - - 2012 - Siemens Sinumerik 840D

          Technical details
          workpiece length 150 mm︱slide travel X-axis 1060 mm︱z-travel 280 mm︱swing diameter 320 mm︱control Siemens Sinumerik 840D ︱rapid speed 0 - 30 m/min︱work piece spindle speed 0 - 6000 U/min︱flange: ︱workpiece spindle - bore 45 mm︱diameter 220 mm︱c-axis zur Positionierung ︱total power requirement 65 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. - m︱
          The CNC 235 vertical hard machining center with vertical workpiece spindle allows the use as single-purpose machine for - Internal grinding - External grinding - Hard Turning Furthermore, these processes can be combined with each other and be supplemented by other technologies. equipped with: - CNC Control Siemens 840D - 2 Toolrevolver (li/re) Size 16 - 2 spindle units (X1, C1, Z1 / X2, C2, Z2) - Marposs Workpiece- & Tool Control E9066N - Dittel AE 6000 - GMN High Frequency Spindle HVX 12 2 identic units available
            workpiece length 150 mm
            slide travel X-axis 1060 mm
            z-travel 280 mm
            swing diameter 320 mm
            control Siemens Sinumerik 840D
            rapid speed 0 - 30 m/min
            work piece spindle speed 0 - 6000 U/min
            workpiece spindle - bore 45 mm
            diameter 220 mm
            c-axis zur Positionierung
            total power requirement 65 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. - m
            Description :
            The CNC 235 vertical hard machining center with vertical
            workpiece spindle allows the use as single-purpose machine for
            - Internal grinding
            - External grinding
            - Hard Turning
            Furthermore, these processes can be combined with each other and
            be supplemented by other technologies.

            equipped with:
            - CNC Control Siemens 840D
            - 2 Toolrevolver (li/re) Size 16
            - 2 spindle units (X1, C1, Z1 / X2, C2, Z2)
            - Marposs Workpiece- & Tool Control E9066N
            - Dittel AE 6000
            - GMN High Frequency Spindle HVX 12

            2 identic units available
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used Heavy Duty Lathe FRORIEP SS 60 x 13000

          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-15807 · Heavy Duty Lathe

          FRORIEP - SS 60 x 13000 - - ca. 1975 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2200 mm︱turning length 13000 / 6500 mm︱centre distance 13000 mm︱faceplate yes mm︱workpiece weight 100 t︱steady 8 ︱Rest 2 ︱spindle bore 95 mm︱internal taper diameter 120 mm︱tailstock quill taper metric 120mm 60° ︱tailstock quill diameter 280 mm︱quill travel 450 mm︱total power requirement - kW︱
          Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed using using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm - 8 Steadies
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2200 mm
            turning length 13000 / 6500 mm
            centre distance 13000 mm
            faceplate yes mm
            workpiece weight 100 t
            steady 8
            Rest 2
            spindle bore 95 mm
            internal taper diameter 120 mm
            tailstock quill taper metric 120mm 60°
            tailstock quill diameter 280 mm
            quill travel 450 mm
            total power requirement - kW
            Description :
            Heavy Duty Lathe with 4-guides bed and is equipped with 2 cross-slides:
            - one is mounted on a chassis bed installed next to the main chassis of the
            lathe
            - one is mounted on an upper chassis bed on top of the main chassis of the lathe
            - the upper chassis bed is also movable on top of the main chassis of the lathe

            Max length of workpiece on main chassis: 13 meter
            Max length of workpiece on top of upper chassis bed: 6,5 meter
            Max swing in gap using main cross-slide: 4000 mm
            Max swing over bed using using secondary cross-slide: 2700 mm
            Max swing over cross-slide: 2220 mm
            - 8 Steadies
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •

            Perfil del comerciante: Kemmerich Werkzeugmaschinen
          Ltd.

          Contactar con el comerciante



            Máquinas de fabricación Kemmerich
          Ltd.

           En el Rottfeld 1a
            40789 - Monheim am Rhein
            Alemania
            + 49 2173 207474 "> + 49 2173 207474
            +49 2173 207473
            info@kemmerich.biz
            www.kemmerich.biz

          Perfil del comerciante

          La empresa Kemmerich Werkzeugmaschinen GmbH

          Desde 1983, la empresa Kemmerich Machine Tools GmbH se encuentra en el cambiante mercado de las máquinas herramienta y está activa como una empresa comercial internacional de ingeniería con el equipo utilizado para el procesamiento de corte y no corte en la industria metalúrgica. Kemmerich trabaja en máquinas de corte de engranajes y máquinas de trabajo pesado, como tornos, fresadoras y rectificadoras y taladros, especializados.

          Las máquinas se utilizan, entre otras, en la industria automotriz (fabricantes y proveedores de equipos), en engranajes y cajas de engranajes, en la producción de rodamientos de bolas o de rodillos, en la maquinaria general utilizada.

          Residente, la empresa se encuentra ahora en Monheim am Rhein, en el corazón de Renania y muy cerca de las ciudades feriales de Colonia y Dusseldorf y sus aeropuertos. Allí, en un espacio de exposición grande y climatizado de 2200 m2, una variedad de herramientas de mecanizado de metales y de procesamiento de metales convencionales y controladas por CNC / PLC siempre están listas para su inspección y demostración. Con una capacidad de grúa de 32, toneladas de todo tipo de máquinas pueden ser gehändelt y movidas.

          En nuestro propio taller, la funcionalidad de las máquinas se verifica y corrige, si es necesario, de cualquier defecto encontrado. Además, las máquinas son modernizadas y modificadas a los requerimientos del cliente. El espectro de potencia de la empresa también incluye el monitoreo de desmontaje o desmontaje, carga, embalaje, agricultura, transporte marítimo y aduanas, instalación y puesta en servicio del cliente a través de la mediación de especialistas, demostrando las máquinas en potencia (si es posible), realizando la máquina. Revisiones y establecimiento de contactos.

          Las máquinas-herramienta derivadas de muchos fabricantes conocidos de Alemania y Europa, como: Boehringer, Deckel-Maho-Gildemeister (DMG), Dörries, Elb, Schiess-Froriep, GleasonGrob, Heckert, Höfler, Hurth, Junker, KlingelnbergLiebherr, Lorenz, Mazak, Mori Seiki, Modul, Maag, Niles, Oerlikon, Pfauter, Reishauer, Schaudt, Studer, Soraluce, TOS, Stanko, Union, Weiler, Waldrich-Coburg, Waldrich-Siegen y Wotan.

          Además de sus propios componentes de la máquina, tanto del stock como de la ubicación de la fábrica bajo tensión y electricidad, Kemmerich puede ofrecer hasta 12,000 máquinas usadas de todo tipo a corto plazo gracias a las relaciones internacionales con clientes y distribuidores, y al acceso a las bases de datos de los líderes alemanes y europeos. distribuidor de maquinaria. La empresa también es miembro de la Asociación de Mayoristas de Máquinas y Herramientas (FDM)

          y la „Asociación Europea de Comerciantes de Máquina-Herramienta (EAMTM)

          .

          La afirmación es clara: seriedad, experiencia y años de experiencia en el sentido. 
          y para el beneficio de los clientes, porque en Kemmerich "usted vive máquinas".

          Sr. Volker KemmerichSr. Andreas Kemmerich
          Teléfono: 02173 / 207472Teléfono: 02173 / 207474
          Fax: 02173 / 207473Fax: 02173 / 207473
          Correo Electrónico:  sales@kemmerich.bizCorreo Electrónico:  info@kemmerich.biz



          Kemmerich Werkzeugmaschinen GmbH 40789 - Monheim am Rhein Im Rottfeld 1a Deutschland
          Kemmerich Werkzeugmaschinen GmbH

          Im Rottfeld 1a



          Contact Trader


            Kemmerich Werkzeugmaschinen GmbH
           Im Rottfeld 1a
            40789 - Monheim am Rhein
            Deutschland
            +49 2173 207474
            +49 2173 207473
            info@kemmerich.biz
            www.kemmerich.biz
            Contact person:
          Herrn Andreas Kemmerich +49 2173 207474
            Seit 1983 ist die Firma Kemmerich Werkzeugmaschinen GmbH auf dem sich ständig ändernden Werkzeugmaschinen-Markt aktiv und handelt als international tätiges Maschinen-Handelsunternehmen mit gebrauchten Maschinen für die spanabhebende und spanlose Verarbeitung der metallverarbeitenden Industrie
          Kemmerich ist dabei auf Zahnradbearbeitungsmaschinen und Maschinen der Schwerzerspanung, wie zum Beispiel Dreh-, Fräs- und Schleifmaschinen sowie Bohrwerke, spezialisiert. Die Maschinen kommen unter anderem in der Automobilindustrie (Ausrüster und Zulieferer), im Zahnrad- und Getriebebau, der Produktion von Kugel- oder Wälzlagern, dem allgemeinen Maschinenbau zum Einsatz.

          Ansässig ist das Unternehmen inzwischen in Monheim am Rhein, im Herzen des Rheinlandes und in unmittelbarer Nähe zu den Messestädten Köln und Düsseldorf und deren Flughäfen. Dort stehen auf einer 2.200 qm großen, beheizbaren Ausstellungsfläche eine Vielzahl von konventionellen wie auch CNC/SPS-gesteuerten Metall be- und verarbeitenden Werkzeugmaschinen stets zur Besichtigung und Vorführung bereit.

          Mit einer Krankapazität von 32 Tonnen können jegliche Art von Maschinen gehändelt und bewegt werden. In der eigenen Werkstatt werden die Funktionsfähigkeit der Maschinen überprüft und gegebenenfalls festgestellte Mängel beseitigt. Zudem werden Maschinen auf Kundenwunsch modernisiert und modifiziert. Das Leistungsspektrum des Unternehmens umfasst zudem die Demontage oder Demontageüberwachung, Verladung, Verpackung sowie Land-, Seetransport und Zollabwicklungen, Montage und Inbetriebnahme beim Kunden durch Vermittlung von Spezialisten, Präsentation der Maschinen unter Strom (soweit möglich), Durchführung von Maschinenbewertungen und die Vermittlung von Kontakten.

          Anstatt in neue, teure Werkzeugmaschinen zu investieren und um lange Lieferzeiten zu umgehen, lohnt es sich oftmals, eine gut gepflegte Gebrauchtmaschine zu kaufen.

          Trader Profile



          Machine category


          · 4-Walzen - Blechbiegemaschine · Abrichtschleifmaschine · Abwickelhaspel-Richtmaschine · Auswuchtmaschine · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechkaltrichtmaschine · Brückenlaufkran - Zweiträger · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelscheibenschleifmaschine · Doppelständerexzenterpresse · Doppelständerziehpresse - Hydraulisch · Doppelständerziehpresse - Mechanisch · Drehmaschine - zyklengesteuert · Elektronik / SPS-Steuerungen · Ersatzteile · Exzenterpresse - Doppelständer · Fahrständerfräsmaschine · Feinstanzpresse · Filteranlage · Flachschleifmaschine · Flachschleifmaschine - Vertikal · Fräsmaschine - Universal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gabelstapler - Gas · Gesenkschmiedepresse · Gewinde-Schnecken-Schleifmaschine · Gewinderollmaschine · Gewindeschälmaschine · Hartdreh- & Schleifzentrum · Hohlspindeldrehmaschine · Honmaschine - handbetätigt · Honmaschine - Innen - Horizontal · Hydraulische - Zweisäulenpresse · Hydraulische Presse · Innenschleifeinrichtung · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kegelradfräsmaschine-Bogenverzahnung · Kegelradfräsmaschine-Geradverzahnung · Kurbelwellenschleifmaschine · Langdrehautomat · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Mechanische - Doppelständerziehpresse · Mehrspindelstangenautomat · Messerschleifmaschine · Motor · Nutenfräsmaschine - Horizontal · Nutenziehmaschine · Pfeilradhobelmaschine · Plan- und Spitzendrehbank · Plandrehmaschine · Planscheibe · Planschleifmaschine · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Querteilanlage · Radialbohrmaschine · Radialbohrmaschine - transportabel · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundtisch-Bohrungs-Schleifmaschine · Räummaschine - Innen - Vertikal · Schweißanlage · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Spitzenlose - Rundschleifmaschine · Späneförderer · Stangenlademagazin · Stanz- und Nibbelmaschine · Stanzautomat-Doppelständer · Stoßmaschine - Vertikal · Stähleschleifmaschine · Tafelschere - hydraulisch · Tieflochbohrmaschine · Tischbohrwerk · Traghülsenplattenbohrwerk · Transferpresse · Vertikal - Honmaschine - Innen · Vertikal - Rundtischflachschleifmaschine · Vertikaldrehmaschine · Verzahnungsmeßmaschine · Vorschubrichtmaschine · Walzendrehmaschine · Walzenschleifmaschine · Wasserstrahlschneidanlage · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Wälzfräser - Hinterschleifmaschine · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradhonmaschine · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenfräsautomat ·
          Compendio
          Software
          Contenido de maquinas usadas
          Privacidad
          Síguenos
          © 2000-2023, Logotech oHG · Software- y servicios de Internet - Todos los derechos reservados