,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine HERA SM 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76564 · Folding Machine

          HERA - SM 4 - - 2000 -

          Technical details
          sheet width 2500 mm︱plate thickness 6,00 mm︱distance between columns mm︱upper beam stroke 600 mm︱adjustment lower beam max. 100 mm︱bending beam adjustment max. 100 mm︱connected load OW 5,5 / BW 7,5 kW︱voltage 50 Hz, 400 V︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. m︱
          • Bending angle adjustment via potentiometer • Sharpening rail 45° • Bending rail • Operation manual Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m
            sheet width 2500 mm
            plate thickness 6,00 mm
            upper beam stroke 600 mm
            adjustment lower beam max. 100 mm
            bending beam adjustment max. 100 mm
            connected load OW 5,5 / BW 7,5 kW
            voltage 50 Hz, 400 V
            weight of the machine ca. 7,00 t
            Description :
            • Bending angle adjustment via potentiometer
            • Sharpening rail 45°
            • Bending rail
            • Operation manual

            Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM IV


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-105341 · Folding Machine

          HERA - UM IV - - 1993 -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱weight of the machine ca. 9 t︱total power requirement kW︱dimensions of the machine ca. m︱distance between columns mm︱
          depth arrester some tools Technische Daten / technical details: Arbeitslänge / working lenght 3000 mm Arbeitsleistung / bending capacity 6 mm Hinteranschlag / arrester behind 1500 mm Öffnung Oberwange / opening upper flank 450 mm max. Biegewinkel / max. folding angle 125 ° Gewicht ca. / weight ca. 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            sheet width 3000 mm
            plate thickness 6 mm
            weight of the machine ca. 9 t
            Description :
            depth arrester
            some tools

            Technische Daten / technical details:
            Arbeitslänge / working lenght 3000 mm
            Arbeitsleistung / bending capacity 6 mm
            Hinteranschlag / arrester behind 1500 mm
            Öffnung Oberwange / opening upper flank 450 mm
            max. Biegewinkel / max. folding angle 125 °
            Gewicht ca. / weight ca. 9000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.





        • Gustav Schönberger GmbH
        • Hünderstr. 14
        • 74080 Heilbronn
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM IV


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76557 · Folding Machine

          HERA - UM IV - - 1990 -

          Technical details
          sheet width 3000 mm︱plate thickness 6,00 mm︱distance between columns mm︱opening of the upper cheek 450 mm︱opening of the down cheek 125 mm︱Opening of the bending cheek 125 mm︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. m︱
          - Renewed control cabinet with Siemens control - controlled back gauge 1000 mm - Crowning adjustment - Support table with wheels - various bending rails including sharp rail - segmented goat's foot - Operation manual
            sheet width 3000 mm
            plate thickness 6,00 mm
            opening of the upper cheek 450 mm
            opening of the down cheek 125 mm
            Opening of the bending cheek 125 mm
            weight of the machine ca. 7,00 t
            Description :
            - Renewed control cabinet with Siemens control
            - controlled back gauge 1000 mm
            - Crowning adjustment
            - Support table with wheels
            - various bending rails including sharp rail
            - segmented goat's foot
            - Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM III / 1000 x 8 mm


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355188 · Folding Machine

          HERA - UM III / 1000 x 8 mm - - - ELGO TYP 86

          Technical details
          sheet width 1050 mm︱plate thickness 8,0 mm︱distance between columns 1250 mm︱angle adjustable from - to 0 - 180 Grad︱upper clamping bar adjustment 350 mm︱traversing speed OW 4,4 mm/sek︱Control ELGO TYP 86 ︱back stop - adjustable max. 1000 mm︱engine output 5,5 kW︱weight of the machine ca. 3200 kg︱range L-W-H 1900 x 2600 x 1600 mm︱
          ** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355188
            sheet width 1050 mm
            plate thickness 8,0 mm
            distance between columns 1250 mm
            angle adjustable from - to 0 - 180 Grad
            upper clamping bar adjustment 350 mm
            traversing speed OW 4,4 mm/sek
            Control ELGO TYP 86
            back stop - adjustable max. 1000 mm
            engine output 5,5 kW
            weight of the machine ca. 3200 kg
            range L-W-H 1900 x 2600 x 1600 mm
            Description :
            ** maintained condition
            ** with a lot of bending tools (!!)
            ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc.

            Furnishing:
            - heavy duty heavy duty folding machine, easy to operate
            - Angle adjustment via electric potentiometer
            - ELGO NC control unit TYPE 86 for electric backgauge
            - NC electric backgauge, with rear sheet metal support surface
            - electric/motorized bending beam
            - Electric/motorized upper beam .. max. 350 mm
            - manual lower beam adjustment .. max. 125 mm
            - manual bending beam adjustment .. max. 125 mm
            - Upper beam with 2x guide spindles
            - 1x free moving foot control
            - 1x mobile tool cabinet for bending tools

            Manufacturer description:
            - electronic lifting height and bending angle adjustment
            - Deactivation of the upper beam lifting height and the clamping pressure via
            timing relay and voltage meter
            - Pushbuttons for controlling the upper and bending beam with manual switching,
            included Upper beam can also be operated via foot switch
            - Adjustability of all cheeks
            - Silent twin motors oil bath worm gear
            - Two-way drive of upper and bending beam via 2 continuous shafts
            - Drive of the upper beam via threaded spindles
            - Drive of the bending beam via internal toothed segments

            * Machine link :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355188


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA UM III / 1000 x 8 mm


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76531 · Folding Machine

          HERA - UM III / 1000 x 8 mm - - - ELGO TYP 86

          Technical details
          sheet width 1050 mm︱plate thickness 8,00 mm︱distance between columns 1250 mm︱angle adjustable from - to 0 - 180 Grad︱upper clamping bar adjustment 350 mm︱traversing speed OW 4,4 mm/sek︱Control ELGO TYP 86 ︱back stop - adjustable max. 1000 mm︱engine output 5,5 kW︱weight of the machine ca. 3200 kg︱range L-W-H 1900 x 2600 x 1600 mm︱
          ** maintained condition ** with a lot of bending tools (!!) ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x guide spindles - 1x free moving foot control - 1x mobile tool cabinet for bending tools Manufacturer description: - electronic lifting height and bending angle adjustment - Deactivation of the upper beam lifting height and the clamping pressure via timing relay and voltage meter - Pushbuttons for controlling the upper and bending beam with manual switching, included Upper beam can also be operated via foot switch - Adjustability of all cheeks - Silent twin motors oil bath worm gear - Two-way drive of upper and bending beam via 2 continuous shafts - Drive of the upper beam via threaded spindles - Drive of the bending beam via internal toothed segments
            sheet width 1050 mm
            plate thickness 8,00 mm
            distance between columns 1250 mm
            angle adjustable from - to 0 - 180 Grad
            upper clamping bar adjustment 350 mm
            traversing speed OW 4,4 mm/sek
            Control ELGO TYP 86
            back stop - adjustable max. 1000 mm
            engine output 5,5 kW
            weight of the machine ca. 3200 kg
            range L-W-H 1900 x 2600 x 1600 mm
            Description :
            ** maintained condition
            ** with a lot of bending tools (!!)
            ** Pointed rails, radius rails, bending rails, divided goat's foot rails etc.

            Furnishing:
            - heavy duty heavy duty folding machine, easy to operate
            - Angle adjustment via electric potentiometer
            - ELGO NC control unit TYPE 86 for electric backgauge
            - NC electric backgauge, with rear sheet metal support surface
            - electric/motorized bending beam
            - Electric/motorized upper beam .. max. 350 mm
            - manual lower beam adjustment .. max. 125 mm
            - manual bending beam adjustment .. max. 125 mm
            - Upper beam with 2x guide spindles
            - 1x free moving foot control
            - 1x mobile tool cabinet for bending tools

            Manufacturer description:
            - electronic lifting height and bending angle adjustment
            - Deactivation of the upper beam lifting height and the clamping pressure via
            timing relay and voltage meter
            - Pushbuttons for controlling the upper and bending beam with manual switching,
            included Upper beam can also be operated via foot switch
            - Adjustability of all cheeks
            - Silent twin motors oil bath worm gear
            - Two-way drive of upper and bending beam via 2 continuous shafts
            - Drive of the upper beam via threaded spindles
            - Drive of the bending beam via internal toothed segments




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake HERA COP


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4020689 · Hydr. pressbrake

          HERA - COP - - 1992/2018 -

          Technical details
          pressure 300 t︱chamfer lenght 4100 mm︱distance between columns 3550 mm︱weight of the machine ca. 24.000 kg︱
          New controller: DNC 884sPS Domestic equipments: - CNC controlled X & R axis - CNC controlled crowning - hydraulic stamp clamping - Fiessler safety light barrier
            pressure 300 t
            chamfer lenght 4100 mm
            distance between columns 3550 mm
            weight of the machine ca. 24.000 kg
            Description :
            New controller: DNC 884sPS
            Domestic equipments:
            - CNC controlled X & R axis
            - CNC controlled crowning
            - hydraulic stamp clamping
            - Fiessler safety light barrier


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HERA TS 3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94078 · Plate Shear - Hydraulic

          HERA - TS 3 - - 1998 -

          Technical details
          sheet width 3100 mm︱plate thickness 3,00 mm︱distance between columns mm︱cutting angle 1-3 °︱no.of strokes 18 /min.︱total power requirement kW︱weight of the machine ca. 3,60 t︱dimensions of the machine ca. 3,70 x 2,00 x 1,55 m︱
          Furnishing • Controlled backgauge 1000mm • SIMATIC OP7 controller • Finger protection • Angle stop 1000mm • Support arm • Manual cutting gap adjustment
            sheet width 3100 mm
            plate thickness 3,00 mm
            cutting angle 1-3 °
            no.of strokes 18 /min.
            weight of the machine ca. 3,60 t
            dimensions of the machine ca. 3,70 x 2,00 x 1,55 m
            Description :
            Furnishing
            • Controlled backgauge 1000mm
            • SIMATIC OP7 controller
            • Finger protection
            • Angle stop 1000mm
            • Support arm
            • Manual cutting gap adjustment


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HERA HSS V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011164 · Plate Shear - Hydraulic

          HERA - HSS V - - 1991 -

          Technical details
          sheet width 3100 mm︱plate thickness 16 mm︱no. of strokes 12 Hub/min︱dimensions 4100x2100x2260 mm︱total power requirement 30 kW︱
            sheet width 3100 mm
            plate thickness 16 mm
            no. of strokes 12 Hub/min
            dimensions 4100x2100x2260 mm
            total power requirement 30 kW


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HERA HSS III


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15630 · Plate Shear - Hydraulic

          HERA - HSS III - - 1988 -

          Technical details
          sheet width 1500 mm︱plate thickness 3 mm︱weight of the machine ca. 4 t︱dimensions of the machine ca. BxTxH 2000x1500x1800 mm︱
            sheet width 1500 mm
            plate thickness 3 mm
            weight of the machine ca. 4 t
            dimensions of the machine ca. BxTxH 2000x1500x1800 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HERA HSS8


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-1040 · Plate Shear - Hydraulic

          HERA - HSS8 - - 1981 -

          Technical details
          sheet width 2500 mm︱plate thickness 5 mm︱distance between columns 2600 mm︱total power requirement 5 kW︱
            sheet width 2500 mm
            plate thickness 5 mm
            distance between columns 2600 mm
            total power requirement 5 kW


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •