pressure 050 t︱punching cross-cut in cmm 31 in 12 mm︱stroke max. 32,0 mm︱column arm 510 mm︱work height max. 1070 mm︱stroke - stepless adjustable 10 - 32 mm︱no. of strokes max. 45 Hub/min︱oil volume 45,0 l︱total power requirement 4,0 kW︱weight of the machine ca. 1120 kg.︱range L-W-H 1118 x 650 x 1680 mm︱

---

** good condition (!!) ** from a maintenance workshop Furnishing: - hydraulic punch, with large overhang - Sheet metal wipers with wiper plates - stepless stroke adjustment - Various application tools - Die base - free-moving footswitch - Operation manual

sheet width 0600 mm︱coil outside dia. 1500 mm︱weight max. in kg 4000 kg︱width of sheet max. ca. 3,60 mm︱sheet thickness - min. 0,80 mm︱diam. of the rolls ca. 80 mm︱nomb. of straightening rolls 7 ︱feed rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 475-535 mm︱expansion hydraulisch ︱pinch roll hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at the outlet - Ultrasonic transmitter for loop control - Swivel control panel - Control Siemens S7

sheet width 0250 mm︱coil outside dia. 1800 mm︱weight max. in kg 2 x 3000 kg︱ 1,5 - 6,0 mm︱ 470 - 530 mm︱ 21 ︱ 30 mm︱ 4 ︱ 18,0 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic

sheet width 0500 mm︱coil outside dia. 1400 mm︱weight max. in kg 4000 kg︱plate thickness 0,80 - 3,60 mm︱diam. of the rolls ca. 80 mm︱feed rolls 2 ︱nomb. of straightening rolls 7 ︱exit pinch rolls 2 ︱speed 5-30 m/min︱range of expansion ca. 445 - 530 mm︱expansion manuell ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket

sheet width 0260 mm︱coil outside dia. 1200 mm︱weight max. in kg 2 x 1000 kg︱sheet thickness - max. 2,00 mm︱nomb. of straightening rolls 19 ︱diam. of the rolls ca. 18 mm︱speed 0-60 m/min︱run-in height 1200-1400 mm︱sheet thickness - min. 0,30 mm︱working direction left - right ja/yes ︱range of expansion ca. 360 - 430 + 460 - 530 mm︱total power requirement 13 kW︱weight of the machine ca. 2,50 t︱dimensions of the machine ca. 5,50 x 1,80 x 2,10 m︱

---

- Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 Steuerung Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide 1.50 x 0.50 x 1.40 m - Control cabinet 0.90 x 0.60 x 2.10 m The system is energized and can be tested with material.

sheet width 0120 mm︱coil outside dia. 1200 mm︱weight max. in kg 300 kg︱sheet thickness - max. 1,00 mm︱diam. of the rolls ca. 10 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 350 - 530 mm︱total power requirement 5,50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank

sheet width 0120 mm︱coil outside dia. 800 mm︱weight max. in kg 150 kg︱plate thickness 1,50 mm︱diam. of the rolls ca. 12 mm︱nomb. of straightening rolls 16 ︱ diameter of the mandrel 180 - 550 mm︱total power requirement 5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet

sheet width 0500 mm︱plate thickness 4,00 mm︱no. of strokes Hub/min︱sheet thickness - min. 0,50 mm︱coil weight 8,00 t︱coil inside-diam. ca. 5087610 mm︱coil outside - diam. ca. 700-2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

material cold rolled steel strip, dry, oiled, galvanized hot-rolled steel strip, scaled, dry, stained, oiled Tensile strength max. 700 N / mm² Material width max. 500 mm Material thickness at least 0.50 mm max. 3.00 mm at 700 N / mm² max. 4.00 mm at 400 N / mm² Coil weight max. 8.0 to. Coil inside - Ø 508/610 mm Coil outside - Ø 700 - 2,000 mm Board length min. 500 mm, max. 6,000 mm Length tolerances ± 0.20 mm to 2,000 mm ± 0.25 mm to 2,500 mm ± 0.30 mm to 3,500 mm ± 0.40 mm to 5,000 mm ± 0.50 mm to 6,000 mm Stack weight max. 3,000 kg Stacking height max. 500 mm with pallet Speed max. 50 m / min. (Straightening machine) Working direction left? to the right Belt passage height approx. 1,300 mm

sheet width 1500 mm︱plate thickness 2,50 mm︱no. of strokes Hub/min︱sheet width - min. 200 mm︱sheet thickness - min. 0,40 mm︱coil weight 12,00 t︱coil inside-diam. ca. 508-610 mm︱plate length 350 - 7000 mm︱speed 30/40 m/min︱working direction left - right ja / yes ︱diam. of the rolls ca. 38 mm︱nomb. of straightening rolls 19 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Material :pickled and oiled, cold rolled, galvanized,electrolytically plated, coil-coated The Line consists of: - Coil Car : Underfloor - Decoiler Expanding: hydraulically - Leveller FIMI power Daylight Width No. - Levelling Rolls 19 Levelling Rolls - Ø 38 mm Roll Support sevenfold - Mounted Roller Cage (Looping Equipment - Infeed) - Looping Equipment Runout - Driver - Shear Manufacturer ATECNIN Year of Construction 2003 Material Thickness 0,40 - 3,00 mm - Conveyor - Stacking Unit Panel Length min. 350 mm / max. 7.000 mm Stacking Height 400 mm Package Weight 5,0 to. Electric Hydraulic

sheet width 2000 mm︱plate thickness 6,00 mm︱no. of strokes Hub/min︱coil weight 30 t︱speed 40 m/min︱working direction right - left ja / yes ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

System consisting of: - Coil loading chair Load capacity 30.0 tons. - Double cone decoiler Load capacity 30.0 tons. - Coil opener table - Edge guide - Pinch roller and straightener - Insertion group in side trimmer unit - Trimmer unit - Transfer table to the scrap winder - Scrap winder - straightener Number – straightening rollers 15 Straightening rollers – Ø 75 mm - Flying scissors Make CBC - Pinch roller - Stack – Attachment Parcel weight max. 5,000 kg Stack height including packaging max. 400 mm - chain conveyor - Unloading crane Load capacity 2 x 8.0 tons. - Hydraulics - Electronics SIMATIC S 5 electrical switchboards

sheet width 1500 mm︱plate thickness 3,00 mm︱no. of strokes Hub/min︱coil weight 16 t︱work speed 20 m/min︱nomb. of straightening rolls 19 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

System consisting of: -Coil loading chair (mobile) above the floor Scissor lift version (serves 2 systems) - decoiler with pressure arm Make NN Load capacity 16.0 tons. Reel head length 1,600 mm Reel head - Ø 508 / 610 mm Spreading / pressure arm hydraulic drive power kW Operating element / control cabinet attached - Steel construction with dancer optical system - Sheet metal leveler Make WMW Erfurt Model 3.6x1600-10-20 with attached infeed table and transfer roller (infeed side) and with attached roller basket (outlet side) Number - straightening rollers 19 (10 x above / 9 x below) Number of supports 12 (6 x above / 6 x below) Target speed max. 20 m/min. Drive power (main drive) kW Motorized height adjustment (2 x) Tilt adjustment (2 x lever) Infeed – hydraulic support rollers - Sling pit equipment (entry roller basket and outlet roller frame) - Transfer frame with DUO roller unit / / tape guide / measuring wheel / - Cut-to-length shears Make NN Execution start / stop drive power kW - Stack setup Make NN Chain conveyor for pallet storage (motor driven) - Electrics - Hydraulics - Pneumatics - Documentation (partly)

sheet width 1100 mm︱plate thickness 3,00 mm︱no. of strokes Hub/min︱coil weight 15 t︱speed 55 m/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

System consisting of: coil lift truck decoiler - load capacity 15.0 t infeed table pressure roller 4 HI leveling machine - 19 leveling rollers, leveling roller diameter 42 mm loop pit guillotine shears inspection table stacker - 3,000 mm unloading roller conveyor Electrics Pneumatics Hydraulics

sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil inside-diam. ca. 1600 mm︱0 1 - 10 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one !

sheet width 0150 mm︱coil weight 2 x 0,50 t︱coil internal dia. 250 - 650 mm︱coil outside - diam. ca. 1600 mm︱0 1-10 U/min︱engine output 2 x 0,75 kW, insgesamt 2 kW︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time!!

sheet width - max. 1600/1780 mm︱coil weight 5,00 t︱coil internal dia. 508 mm︱height of the drum over the floor ca. 1150 mm︱total power requirement kW︱weight of the machine ca. 5,50 t︱dimensions of the machine ca. m︱

---

Equipment: - Substructure frame - hydraulic - Hydraulic spread - Pressure arm hydraulic - Pressing roller driven - Brake / disc brake - hydraulic Hydraulics not available Dimensions (L x W x H): reel: approx. 3,740 x 1,470 x 1,520 mm Substructure frame: approx. 1,760 x 960 x 600 mm

sheet width - max. 0340 mm︱coil weight 1,00 t︱coil internal dia. 265 - 565 mm︱total power requirement kW︱weight of the machine ca. 0,25 t︱dimensions of the machine ca. 1,40 x 1,20 x 1,80 m︱

---

construction: support segment – system no. - support segments 3 length – suppert segments 400 mm working direction left-right / right-left counter ring – Ø 1.600 mm shaft – Ø 70 mm height floor - middle of shaft 840 mm accessories: construction - pedestal construction - rectangular tube positioned under decoiler construction, to proceed the relocation by forklift or similar expanding process manually by bevel gear wheel brake system disc brake brake caliper pneumatically, manufacturer TWIFLEX counter ring 2 pc. option: decoiler equipped with shifting frame (by linear guiding)

sheet width - max. 0500 mm︱coil weight 2,00 t︱coil internal dia. 350 - 550 mm︱coil outside - diam. ca. 1400 mm︱expansion hydraulisch ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Hydraulic spreading - 6 pieces of clip-on arms for lateral band limitation - Frequency-controlled drive - Loop control via ultrasonic transmitter - Free-standing control cabinet - Pneumatic pressure roller from above, can be moved laterally - Engine brake - Swivel hand control panel - Reel can be moved hydraulically - Loading chair can be swiveled 90°

sheet width - max. 0100 mm︱coil weight 0,150 t︱coil internal dia. 320 - 520 mm︱coil outside - diam. ca. 1200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame

sheet width - max. 0600 mm︱coil weight 3,00 t︱coil internal dia. 465 - 530 mm︱total power requirement kW︱weight of the machine ca. 2,45 t︱dimensions of the machine ca. 2,72 x 1,70 x 2,40 m︱

---

material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available

sheet width - max. 0500 mm︱coil weight 3,00 t︱coil internal dia. 370 - 510 mm︱total power requirement kW︱weight of the machine ca. 0,54 t︱dimensions of the machine ca. 1,25 x 1,08 x 1,67 m︱

---

material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9

sheet width - max. 0500/650 mm︱coil weight 2,50 t︱coil internal dia. 430 - 520 mm︱coil outside - diam. ca. 1800 mm︱speed ca. 16 m/min.︱expansion mechanisch ︱total power requirement 1,50 kW︱weight of the machine ca. 1,00 t︱dimensions of the machine ca. 1,70 x 1,30 x 1,60 m︱

---

- Jaw length 650 mm - Band scanning via proximity switch in start/stop - 4 waistband arms - Belt loop control via dancer roller prepared decoiler is under power

sheet width - max. 0250 mm︱coil weight 0,200 t︱coil internal dia. 240 - 560 mm︱coil outside dia. 1300 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame

sheet width - max. 1600 mm︱coil weight 5,00 t︱coil internal dia. 508-610 mm︱coil outside - diam. ca. 1400 mm︱working direction left - right ja/yes ︱range of expansion ca. 460 - 530 mm︱total power requirement kW︱weight of the machine ca. 8,10 t︱dimensions of the machine ca. 8,00 x 2,50 x 2,20 m︱

---

Equipment: - Driven paper winder (floor mounting) Core width max. 1,600 mm Inside of Case - Through. 76mm - Substructure frame with integrated toothed rack (reel shift) - Coil loading chair – integrated in the coiler substructure above the floor - decoiler Drive (auxiliary drive) power 1.1 kW Spread hydraulically Pressure arm hydraulic Driven pressure roller (motorized via chain) Drive power 0.75 kW Motorized reel shift (via rack) Disc brake - pneumatic Valve stand attached to reel construction Coil stop disc 1,400 mm diam. - Hydraulics - Electrics not available

sheet width - max. 0250 mm︱coil weight 0,200 t︱coil internal dia. 240 - 560 mm︱coil outside - diam. ca. 1000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

- Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame