Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Bästlein Gebrauchtmaschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Bench Lathe

          used  Bench Lathe BERNARDO Hobby 500


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3010621 · Bench Lathe

          BERNARDO - Hobby 500 - - 2015 -

          Technical details
          turning length 500 mm︱centre height 120 mm︱turning diameter over bed 240 mm︱spindle bore 20 mm︱turning speed range 140-1.710 U/min︱total power requirement 0,8 kW︱weight of the machine ca. 130 kg︱dimensions of the machine ca. 1150x480x1200 mm︱
            turning length 500 mm
            centre height 120 mm
            turning diameter over bed 240 mm
            spindle bore 20 mm
            turning speed range 140-1.710 U/min
            total power requirement 0,8 kW
            weight of the machine ca. 130 kg
            dimensions of the machine ca. 1150x480x1200 mm
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe WEILER Condor B 81


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3010613 · Center Lathe

          WEILER - Condor B 81 - - 1989 -

          Technical details
          turning length 750 mm︱centre height 165 mm︱spindle passage 40 mm︱turning speed range 22 - 2.800 UpM︱ 3,2 kW︱weight 1040 kg︱ 1850 x 880 x 1290 mm︱
            turning length 750 mm
            centre height 165 mm
            spindle passage 40 mm
            turning speed range 22 - 2.800 UpM
            3,2 kW
            weight 1040 kg
            1850 x 880 x 1290 mm
          Datasheet
          Request / Contact
          used  Center Lathe VDF-BOEHRINGER


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3010623 · Center Lathe

          VDF-BOEHRINGER - - - -

          Technical details
          turning length 2.000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning length 2.000 mm
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe MONFORTS KNC 5 1500


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3020216 · CNC Lathe

          MONFORTS - KNC 5 1500 - - 2002 -

          Technical details
          centre height 250 mm︱centre distance 1580 mm︱ 290 mm︱turning dia. over bed 500 mm︱spindle taper DIN 55027 ︱spindle motor 15 kW︱Number of axles 3 St.︱spindle passage 70 mm︱diameter of quill 80 mm︱cross movement. (x-axis) 265 mm︱quill stroke 160 mm︱3-jaw-chuck diameter 250 mm︱weight of the machine ca. 3000 kg︱ 3330 x 1550 x 1790 mm︱
            centre height 250 mm
            centre distance 1580 mm
            290 mm
            turning dia. over bed 500 mm
            spindle taper DIN 55027
            spindle motor 15 kW
            Number of axles 3 St.
            spindle passage 70 mm
            diameter of quill 80 mm
            cross movement. (x-axis) 265 mm
            quill stroke 160 mm
            3-jaw-chuck diameter 250 mm
            weight of the machine ca. 3000 kg
            3330 x 1550 x 1790 mm
          Datasheet
          Request / Contact
          used  CNC Lathe BIGLIA B 201 F RBT 3


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3020225 · CNC Lathe

          BIGLIA - B 201 F RBT 3 - - 1998 - Fanuc Serie 18-T

          Technical details
          280 mm︱ 320 mm︱turning length 200 mm︱turning speeds 40 - 3350 U/min︱ 360 mm︱spindle bore 80 mm︱x-axis 180 mm︱z-axis 200 mm︱ 100 mm︱clamping chuck diameter 200 - 250 mm︱control Fanuc Serie 18-T ︱machine weight ab. 5.720 kg︱Overall size 3834 x 2100 x 1800 mm︱
            280 mm
            320 mm
            turning length 200 mm
            turning speeds 40 - 3350 U/min
            360 mm
            spindle bore 80 mm
            x-axis 180 mm
            z-axis 200 mm
            100 mm
            clamping chuck diameter 200 - 250 mm
            control Fanuc Serie 18-T
            machine weight ab. 5.720 kg
            Overall size 3834 x 2100 x 1800 mm
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine ALZMETALL ALZTRONIC i14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010514 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 83 kg︱
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 83 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC i16


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010515 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i16 - - Neu -

          Technical details
          16 mm︱ M 12MK 2100-2.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,7 kW︱weight 83 kg︱
            16 mm
            M 12
            MK 2
            100-2.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,7 kW
            weight 83 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC 16


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010418 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC 16 - - NEU -

          Technical details
          16 mm︱ M 12MK 2100-2.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,54 kW︱
          - AC motor 230 Volt, 50 Hz or 60 Hz - Digital RPM Read-out (LED) - Infinitely variable speed drive - Reverse switch for tapping - Spindle protection electrically secured - ON/OFF switches - EMERGENCY-OFF switch - Plug, fully assembled, cable length 3 m
            16 mm
            M 12
            MK 2
            100-2.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,54 kW
            Description :
            - AC motor 230 Volt, 50 Hz or 60 Hz
            - Digital RPM Read-out (LED)
            - Infinitely variable speed drive
            - Reverse switch for tapping
            - Spindle protection electrically secured
            - ON/OFF switches
            - EMERGENCY-OFF switch
            - Plug, fully assembled, cable length 3 m

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ZIMMER BMT 23 VI


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010520 · Bench Drilling Machine

          ZIMMER - BMT 23 VI - - Neu -

          Technical details
          23 ︱thread capacity M10 ︱bore stroke 90 mm︱Short spindle MK2 ︱throat 180 mm︱Machine table - usable table surface 285x285 mm︱table load 45 kg︱spindle turning speed range 150-1.250/350-3.000 UpM︱total power requirement 0,75 kW︱Overall size 735x470x1080 mm︱weight of the machine ca. 106 kg︱
            23
            thread capacity M10
            bore stroke 90 mm
            Short spindle MK2
            throat 180 mm
            Machine table - usable table sur. 285x285 mm
            table load 45 kg
            spindle turning speed range 150-1.250/350-3.000 UpM
            total power requirement 0,75 kW
            Overall size 735x470x1080 mm
            weight of the machine ca. 106 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL AX 2-T iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010504 · Bench Drilling Machine

          ALZMETALL - AX 2-T iTRONIC - - Neu -

          Technical details
          23 mm︱threading in St 60 M14 ︱threading in GG 20 M16MK 2 ︱spindle stroke 100 mm︱ 125-2400 U/min.︱throat 250 mm︱column diameter 90 mm︱ 370x300 mm︱ 2x14x160 mm︱distance spindle /table min./max. 125/455 mm︱ Handkurbel320x250 mm︱ 2x14x160 mm︱ 625/625 mm︱feed von Hand ︱height of the machine 1095 mm︱weight of the machine ca. 160 kg︱
            23 mm
            threading in St 60 M14
            threading in GG 20 M16
            MK 2
            spindle stroke 100 mm
            125-2400 U/min.
            throat 250 mm
            column diameter 90 mm
            370x300 mm
            2x14x160 mm
            distance spindle /table min./max. 125/455 mm
            Handkurbel
            320x250 mm
            2x14x160 mm
            625/625 mm
            feed von Hand
            height of the machine 1095 mm
            weight of the machine ca. 160 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC 16


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010388 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC 16 - - NEU -

          Technical details
          16 mm︱ M 12MK 2100-2.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,54 kW︱
          Standard equipment: - AC motor 230 volts, 50 Hz - Speed display digital (LED) - Speed adjustment stepless - Reversing switch for clockwise and anti-clockwise rotation - Spindle protection with electrical protection - On / Off button - Mushroom pushbutton (latching) for EMERGENCY STOP - Connection plug fully assembled, cable length 3 m Pos.37.1 Digital drilling depth display 0-point determination (start of drilling) 4-digit LED display, character height: 13 mm
            16 mm
            M 12
            MK 2
            100-2.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,54 kW
            Description :
            Standard equipment:
            - AC motor 230 volts, 50 Hz
            - Speed display digital (LED)
            - Speed adjustment stepless
            - Reversing switch for clockwise and anti-clockwise rotation
            - Spindle protection with electrical protection
            - On / Off button
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Connection plug fully assembled, cable length 3 m

            Pos.37.1
            Digital drilling depth display
            0-point determination (start of drilling)
            4-digit LED display, character height: 13 mm
          Datasheet
          Request / Contact
          used  Bench Drilling Machine ZIMMER BMT 20


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010519 · Bench Drilling Machine

          ZIMMER - BMT 20 - - Neu -

          Technical details
          20 ︱bore stroke 80 mm︱Short spindle MK2 ︱throat 180 mm︱Machine table - usable table surface 285x285 mm︱table load 45 kg︱spindle turning speed range 210-2.500 UpM︱total power requirement 0,38 kW︱Overall size 620x470x1050 mm︱weight of the machine ca. 80 kg︱
            20
            bore stroke 80 mm
            Short spindle MK2
            throat 180 mm
            Machine table - usable table sur. 285x285 mm
            table load 45 kg
            spindle turning speed range 210-2.500 UpM
            total power requirement 0,38 kW
            Overall size 620x470x1050 mm
            weight of the machine ca. 80 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL Alzstar 18-T/S


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010258 · Bench Drilling Machine

          ALZMETALL - Alzstar 18-T/S - - Neu -

          Technical details
          18 mm︱ M 12M 14MK 2225-4.300 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱total power requirement 0,37/0,55 kW︱Machine height 840 mm︱weight 110 kg︱
          Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection
            18 mm
            M 12
            M 14
            MK 2
            225-4.300 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            total power requirement 0,37/0,55 kW
            Machine height 840 mm
            weight 110 kg
            Description :
            Standard equipment:
            - Main switch with motor protection switch lockable
            - Reversing switch for clockwise and anti-clockwise rotation
            - Speed adjustment stepless
            - Protection IP 54
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Spindle protection with electrical protection
          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC 14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2030050 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC 14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,54 kW︱
          Standard equipment: - AC motor 230 volts, 50 Hz - Speed display digital (LED) - Speed adjustment stepless - Reversing switch for clockwise and anti-clockwise rotation - Spindle protection with electrical protection - On / Off button - Mushroom pushbutton (latching) for EMERGENCY STOP - Connection plug fully assembled, cable length 3 m
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,54 kW
            Description :
            Standard equipment:
            - AC motor 230 volts, 50 Hz
            - Speed display digital (LED)
            - Speed adjustment stepless
            - Reversing switch for clockwise and anti-clockwise rotation
            - Spindle protection with electrical protection
            - On / Off button
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Connection plug fully assembled, cable length 3 m
          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC i12


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010536 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC i12 - - Neu -

          Technical details
          12 mm︱ M 10B 16250 - 5000 U/min.︱spindle stroke 40 mm︱throat 200 mm︱column diameter 50 mm︱ 2 x 12 x 80 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 110 / 250 mm︱feed von HandHandrad ︱Machine height 670 mm︱total power requirement 0,7 kW︱weight 64 kg︱
            12 mm
            M 10
            B 16
            250 - 5000 U/min.
            spindle stroke 40 mm
            throat 200 mm
            column diameter 50 mm
            2 x 12 x 80 mm
            300x240 mm
            2 x 12 x 80 mm
            110 / 250 mm
            feed von Hand
            Handrad
            Machine height 670 mm
            total power requirement 0,7 kW
            weight 64 kg
            Description :

          Datasheet
          Request / Contact
          used  Bench Drilling Machine ALZMETALL ALZTRONIC 14


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010527 · Bench Drilling Machine

          ALZMETALL - ALZTRONIC 14 - - Neu -

          Technical details
          14 mm︱ M 10MK 2230-4.000 U/min.︱spindle stroke 80 mm︱throat 190 mm︱column diameter 65 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 75/357 mm︱ 300x240 mm︱ 2 x 12 x 80 mm︱ 437/437 mm︱feed von HandHandkurbel ︱Machine height 825 mm︱total power requirement 0,54 kW︱
          Standard equipment: - AC motor 230 volts, 50 Hz - Speed display digital (LED) - Speed adjustment stepless - Reversing switch for clockwise and anti-clockwise rotation - Spindle protection with electrical protection - On / Off button - Mushroom pushbutton (latching) for EMERGENCY STOP - Connection plug fully assembled, cable length 3 m
            14 mm
            M 10
            MK 2
            230-4.000 U/min.
            spindle stroke 80 mm
            throat 190 mm
            column diameter 65 mm
            300x240 mm
            2 x 12 x 80 mm
            75/357 mm
            300x240 mm
            2 x 12 x 80 mm
            437/437 mm
            feed von Hand
            Handkurbel
            Machine height 825 mm
            total power requirement 0,54 kW
            Description :
            Standard equipment:
            - AC motor 230 volts, 50 Hz
            - Speed display digital (LED)
            - Speed adjustment stepless
            - Reversing switch for clockwise and anti-clockwise rotation
            - Spindle protection with electrical protection
            - On / Off button
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Connection plug fully assembled, cable length 3 m
          Datasheet
          Request / Contact

          Drilling and Milling M/C

          used  Drilling and Milling M/C BERNARDO FM 45 eco


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010547 · Drilling and Milling M/C

          BERNARDO - FM 45 eco - - 2015 -

          Technical details
          x-travel 490 mm︱y-travel 205 mm︱bore capacity in steel 32 mm︱bore capacity in cast iron 40 mm︱Spindle Speed 95 - 1970 U/min.︱spindle taper MK 4 ︱quill stroke 120 mm︱throat 260 mm︱milling head -swivable +/- 90 °︱T-slots 14 mm︱table-size 730 x 210 mm︱distance spindle /table 55 - 495 mm︱weight of the machine ca. 260 kg︱dimensions 1080 x 800 x 1380 mm︱
            x-travel 490 mm
            y-travel 205 mm
            bore capacity in steel 32 mm
            bore capacity in cast iron 40 mm
            Spindle Speed 95 - 1970 U/min.
            spindle taper MK 4
            quill stroke 120 mm
            throat 260 mm
            milling head -swivable +/- 90 °
            T-slots 14 mm
            table-size 730 x 210 mm
            distance spindle /table 55 - 495 mm
            weight of the machine ca. 260 kg
            dimensions 1080 x 800 x 1380 mm
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal CHIRON FZ 15 W High Speed


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-1030242 · Machining Center - Universal

          CHIRON - FZ 15 W High Speed - - 2003 - Fanuc Series 18i M

          Technical details
          x-travel 550 mm︱y-travel 400 mm︱z-travel 425 mm︱table surface area 660 x 400 mm︱tool taper SK40 ︱control Fanuc Series 18i M ︱weight 7850 kg︱dimensions 3000 x 2000 x 2500 mm︱
            x-travel 550 mm
            y-travel 400 mm
            z-travel 425 mm
            table surface area 660 x 400 mm
            tool taper SK40
            control Fanuc Series 18i M
            weight 7850 kg
            dimensions 3000 x 2000 x 2500 mm
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical HURCO VMX 42 SR


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-1030235 · Machining Center - Vertical

          HURCO - VMX 42 SR - - 2007 - Ultimax

          Technical details
          x-travel 1060 mm︱y-travel 610 mm︱z-travel 610 mm︱b-axis +/- 92 °︱ 360 °︱rotary table dia. 600 mm︱control Ultimax27799 h︱Spindle Speed 12000 U/min.︱rapid traverse 35000 mm/min︱total power requirement 23,8 kW︱
            x-travel 1060 mm
            y-travel 610 mm
            z-travel 610 mm
            b-axis +/- 92 °
            360 °
            rotary table dia. 600 mm
            control Ultimax
            27799 h
            Spindle Speed 12000 U/min.
            rapid traverse 35000 mm/min
            total power requirement 23,8 kW
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine ALZMETALL AX 3 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010501 · Pillar Drilling Machine

          ALZMETALL - AX 3 iTRONIC-V - - Neu -

          Technical details
          40 mm︱ M 24M 30MK 3 ︱spindle turning speed - stepless 160-2250 U/min︱spindle stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱ 514x360 mm︱distance spindle /table min./max. 117/701 mm︱ 2 x 14 x 224 mm︱feed 0,1 + 0,2 mm/U︱drive motor 1,45/1,9 kW︱Machine height 1840 mm︱weight 270 kg︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6 threads / min (thread cutting performance dependent on the spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Feed overload protection with AX 3 iTRONIC-V - Machine oil first filling: oil bottle, loose delivery; only for AX 3 iTRONIC-V Item 12 LED machine lamp, with radially adjustable light beam, protection class IP 65, additional switching functions in the display, connection voltage 24 V Item 25 Coolant system B, consisting of: separate container (33 l), pump with motor protection switch, complete fitting, non-return valve, switching functions for coolant supply Item 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data via the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as Setpoint Item 37.6 Maximum drilling depth display as a measuring function for the current drilling depth Item 50.6 Drilling depth fine adjustment and fixed stop setting value 0.1 mm
            40 mm
            M 24
            M 30
            MK 3
            spindle turning speed - stepless 160-2250 U/min
            spindle stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            514x360 mm
            distance spindle /table min./max. 117/701 mm
            2 x 14 x 224 mm
            feed 0,1 + 0,2 mm/U
            drive motor 1,45/1,9 kW
            Machine height 1840 mm
            weight 270 kg
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6 threads / min (thread cutting performance dependent on the spindle speed), thread depth adjustable via depth stop
            and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Feed overload protection with AX 3 iTRONIC-V
            - Machine oil first filling: oil bottle, loose delivery; only for AX 3 iTRONIC-V

            Item 12
            LED machine lamp, with radially adjustable light beam, protection class IP 65,
            additional switching functions in the display, connection voltage 24 V

            Item 25
            Coolant system B, consisting of: separate container (33 l), pump with motor protection switch, complete fitting, non-return valve, switching functions for coolant supply

            Item 37.5
            Technology computer in the display. The technology computer guides you through the machining task.
            Determination of the cutting data via the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as
            Setpoint

            Item 37.6
            Maximum drilling depth display as a measuring function for the current drilling depth

            Item 50.6
            Drilling depth fine adjustment and fixed stop setting value 0.1 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 26 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010523 · Pillar Drilling Machine

          ALZMETALL - AB 26 iTRONIC - - Neu -

          Technical details
          26 mm︱ 30 mm︱ 30 mm︱threading in St 60 M 20 ︱threading in GG 20 M 24MK 3120-2.200 U/min.︱throat 293 mm︱ 514x360 mm︱ 2 x 14 x 224 mm︱ 90/675 mm︱column diameter 115 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,0/1,6 kW︱Machine height 1865 mm︱weight 380 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            26 mm
            30 mm
            30 mm
            threading in St 60 M 20
            threading in GG 20 M 24
            MK 3
            120-2.200 U/min.
            throat 293 mm
            514x360 mm
            2 x 14 x 224 mm
            90/675 mm
            column diameter 115 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,0/1,6 kW
            Machine height 1865 mm
            weight 380 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL Alzstar 40 iTRONIC-V


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010502 · Pillar Drilling Machine

          ALZMETALL - Alzstar 40 iTRONIC-V - - Neu -

          Technical details
          Drilling capacity in St 60 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30 ︱Short spindle MK 3 ︱bore stroke 120 mm︱throat 293 mm︱column diameter 115 mm︱Machine table - usable table surface 514x360 mm︱T-Slots Amount - Width - Distance 2 x 14 x 224 mm︱Distance spindle - machine table min./max. 117/701 mm︱feed 0,10 + 0,20 mm/U︱spindle turning speed range 160-2.250 UpM︱total power requirement 1,45/1,9 kW︱height of the machine 1840 mm︱weight of the machine ca. 285 kg︱
          Standard equipment: 7 "TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
            Drilling capacity in St 60 40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            Short spindle MK 3
            bore stroke 120 mm
            throat 293 mm
            column diameter 115 mm
            Machine table - usable table sur. 514x360 mm
            T-Slots Amount - Width - Distanc. 2 x 14 x 224 mm
            Distance spindle - machine table. 117/701 mm
            feed 0,10 + 0,20 mm/U
            spindle turning speed range 160-2.250 UpM
            total power requirement 1,45/1,9 kW
            height of the machine 1840 mm
            weight of the machine ca. 285 kg
            Description :
            Standard equipment:
            7 "TFT - LCD display with touch function: manual input of spindle speed
            Setpoint, speed display actual value, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the machining task. Determination of the cutting data using the following parameters: manufacturing process, tool diameter, cutting speed, material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 34 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010503 · Pillar Drilling Machine

          ALZMETALL - AB 34 iTRONIC - - Neu -

          Technical details
          34 mm︱ 40 mm︱ 40 mm︱threading in St 60 M 24 ︱threading in GG 20 M 30MK 4100-1.800 U/min.︱throat 300 mm︱ 615x430 mm︱ 2 x 14 x 224 mm︱ 138/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱total power requirement 1,4/2,2 kW︱Machine height 1865 mm︱weight 470 kg︱
          Standard equipment: 7 "" TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical protection - Three separate buttons for clockwise - counterclockwise - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch - Machine oil first filling: oil bottle, loose delivery Pos. 20.5 Foot switch, in addition to the thread cutting device for switching the Spindle direction of rotation in the process Pos. 37.5 Technology computer in the display. The technology computer guides you through the Machining task. Determination of the cutting data using the following parameters: Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
            34 mm
            40 mm
            40 mm
            threading in St 60 M 24
            threading in GG 20 M 30
            MK 4
            100-1.800 U/min.
            throat 300 mm
            615x430 mm
            2 x 14 x 224 mm
            138/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            total power requirement 1,4/2,2 kW
            Machine height 1865 mm
            weight 470 kg
            Description :
            Standard equipment:
            7 "" TFT LCD display with touch function: manual input of spindle speed
            Setpoint, actual speed display, integrated drilling depth display with touch
            Zero point transfer, virtual drilling depth scale in the display, machine
            Status displays and warnings in the display, service information, selectable
            User language: DE / EN / FR / ES / IT / NL / RU

            - Thread cutting device, for thread cutting with stop, max. 6th
            Thread / min (thread cutting performance dependent on spindle speed), thread depth
            adjustable via depth stop and in the TFT - LCD display (4 tools)
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical protection
            - Three separate buttons for clockwise - counterclockwise - stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD structured paint signal white RAL 9003, PANTONE 7545c, black
            - Electromagnetic feed clutch with overload protection and electrical comfort cross-handle switch
            - Machine oil first filling: oil bottle, loose delivery

            Pos. 20.5
            Foot switch, in addition to the thread cutting device for switching the
            Spindle direction of rotation in the process

            Pos. 37.5
            Technology computer in the display. The technology computer guides you through the
            Machining task. Determination of the cutting data using the following parameters:
            Manufacturing process, tool diameter, cutting speed, Material table, transfer function of the spindle speed as setpoint
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AB 40 iTRONIC


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-2010510 · Pillar Drilling Machine

          ALZMETALL - AB 40 iTRONIC - - Neu -

          Technical details
          40 mm︱bore capacity in cast iron 46 mm︱ 50 mm︱ M 30M36MK 4 ︱throat 300 mm︱ 100-1600 U/min.︱ 615x430 mm︱ 2x14x224 mm︱Distance spindle/table max. 147/688 mm︱column diameter 145 mm︱spindle stroke 160 mm︱feeds 0,1-0,2-0,3-0,4 mm/U︱height of the machine 1885 mm︱drive motor 1,8/2,9 kW︱weight of the machine ca. 450 kg︱
            40 mm
            bore capacity in cast iron 46 mm
            50 mm
            M 30
            M36
            MK 4
            throat 300 mm
            100-1600 U/min.
            615x430 mm
            2x14x224 mm
            Distance spindle/table max. 147/688 mm
            column diameter 145 mm
            spindle stroke 160 mm
            feeds 0,1-0,2-0,3-0,4 mm/U
            height of the machine 1885 mm
            drive motor 1,8/2,9 kW
            weight of the machine ca. 450 kg
            Description :

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Perfil del comerciante: Bästlein
          Maquina comercial usada GmbH

          Contactar con el comerciante



            Bästlein
          Maquina comercial usada GmbH

           Augsburger Str. 56
            89312 Günzburg
            Alemania
            + 49 (0) 8221 93037-0 "> + 49 (0) 8221 93037-0
            + 49 (0) 8221 93037-29
            info@baestlein.com
            www.baestlein.com

          Perfil del comerciante

          compañía

          Somos una empresa comercial de maquinaria nueva y usada. En nuestra área de inventario de 3500 m², ofrecemos constantemente una amplia gama de maquinaria usada completamente revisada y probada.

          En 2002 adquirimos Braendle Tool Machines Company, que ha sido sinónimo de confiabilidad y calidad durante más de 35 años en la venta de maquinaria nueva y usada.

          Continuaremos esta tradición y la complementaremos con nuestra filosofía personal: 
          Conocimiento competente, asesoramiento y servicio amable y profesional.

          ¿Estás buscando un tipo específico o marca? Le enviaremos una oferta personalizada, solo envíenos su  solicitar.

          Maquinaria usada

          Baestlein ofrece una amplia gama de maquinaria usada por fabricantes conocidos en muy buenas condiciones.

          Todas las máquinas son inspeccionadas y probadas por nuestro equipo de ingenieros para asegurar que las máquinas estén en buenas condiciones de funcionamiento.

          Para obtener una visión general de nuestro inventario actual, simplemente seleccione Maquinaria usada a la izquierda.

          Maquinaria nueva

          Por supuesto también ofrecemos un inventario de maquinaria nueva. Por favor, siéntase libre de  en contacto Nosotros con cualquier pregunta.

          También ejecutamos:

          - Desmontaje completo
          - embarque
          - envio
          - Autorizaciones completas de la empresa.

          Bästlein

          Maquina comercial usada GmbH

          Augsburger Str. 56
          89312 Günzburg
          Alemania
          Teléfono+49 8221 93037-0
          Fax+49 8221 93037-29
          Mailinfo@baestlein.com




          Bästlein Gebrauchtmaschinenhandel GmbH  89312 Günzburg Augsburger Str. 56 Deutschland
          Bästlein Gebrauchtmaschinenhandel GmbH

          Augsburger Str. 56



          Contact Trader


            Bästlein Gebrauchtmaschinenhandel GmbH
           Augsburger Str. 56
            89312 Günzburg
            Deutschland
            +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
            info@baestlein.com
            www.baestlein.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Aufspannplatte · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Automatisch · Bandsäge - Vertikal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · CNC Drehmaschine · CNC-Blechbiegezentrum · Drahtbiegemaschine · Flachschleifmaschine · Fräsmaschine - Universal · Gabelhubwagen - von Hand · Gewindeschneidmaschine · Hochregallager · Hydraulische Presse · Induktionsanlage · Kaltkreissäge · Kappsäge · Kolbenkompressor · Koordinatenmessmaschine · Kreissäge - Automatisch · Langbandschleifmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Lochstanze · Messplatte · Pneumatische Presse · Profilbearbeitungszentrum · Profilstahlschere · Radialbohrmaschine · Revolverbohrmaschine · Revolverstanze · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Schraubenkompressor · Schweißdrehtisch · Schwenkbiegemaschine · Sickenmaschine · Spindelpresse · Stanz- und Nibbelmaschine · Säulenbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tischbohrmaschine · Tischdrehbank · Werkstattpresse - hydraulisch · Werkzeugschleifmaschine ·