Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Amann Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe BOEHRINGER DUE 630 x 1000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17591 · Center Lathe

          BOEHRINGER - DUE 630 x 1000 - - 1988 -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 385 mm︱turning length 1250 mm︱speeds 9 - 1800 U/min︱spindle passage 82 mm︱tailstock quill taper MT 6 ︱total power requirement 22 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,6 x 1,9 x 2,2 m︱
          The cross slide has been completely redesigned. Scraping of all sliding surfaces plus doubling of the wedge. Rapid traverse longitudinal / plan Digital display Heidenhain ND780 Three-jaw chuck Forkardt 315 mm Multifix size CD some steel holder cassettes Fixed 3 - point steady rest Ø315 mm Machine light Coolant pump Stainless steel floor pan
            turning diameter over bed 630 mm
            turning diameter over slide rest 385 mm
            turning length 1250 mm
            speeds 9 - 1800 U/min
            spindle passage 82 mm
            tailstock quill taper MT 6
            total power requirement 22 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,6 x 1,9 x 2,2 m
            Description :
            The cross slide has been completely redesigned.
            Scraping of all sliding surfaces plus doubling of the wedge.
            Rapid traverse longitudinal / plan
            Digital display Heidenhain ND780
            Three-jaw chuck Forkardt 315 mm
            Multifix size CD
            some steel holder cassettes
            Fixed 3 - point steady rest Ø315 mm
            Machine light
            Coolant pump
            Stainless steel floor pan
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17367 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2008 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱workpiece length - max. 400 mm︱travel -x axis 280 mm︱feed in x - axis 0,1 - 30 m/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1150 mm︱feed range Z-direction 0,1 - 60000 mm/min︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5000 U/min︱tool turret 12 times C4 Capto︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            workpiece length - max. 400 mm
            travel -x axis 280 mm
            feed in x - axis 0,1 - 30 m/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1150 mm
            feed range Z-direction 0,1 - 60000 mm/min
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5000 U/min
            tool turret 12 times C4 Capto
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17366 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2008 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱workpiece length - max. 400 mm︱travel -x axis 280 mm︱feed in x - axis 0,1 - 30 m/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1150 mm︱feed range Z-direction 0,1 - 60000 mm/min︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5000 U/min︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            workpiece length - max. 400 mm
            travel -x axis 280 mm
            feed in x - axis 0,1 - 30 m/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1150 mm
            feed range Z-direction 0,1 - 60000 mm/min
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5000 U/min
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17365 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2005 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱travel -x axis 280 mm︱feed x-axis 0,1 - 30.000 mm/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1.150 mm︱Feed z- axis 0,1 - 60.000 mm / min.︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5.000 U/min︱tool turret - number of stations 12 ︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            travel -x axis 280 mm
            feed x-axis 0,1 - 30.000 mm/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1.150 mm
            Feed z- axis 0,1 - 60.000 mm / min.
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5.000 U/min
            tool turret - number of stations 12
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TNK 36


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17583 · CNC Lathe

          TRAUB - TNK 36 - - 2004 - TX8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control TX8i ︱bar capacity 36 mm︱main spindle speeds: 1 - 6300 ︱power capacity at 60% / 100 % load 10,7 / 6,7 KW︱torque 32 / 21 Nm︱spindle head DIN 55026 - Size 4 ︱Opposed spindle turning speed 1 - 6300 1/min.︱power capacity at 60% / 100 % load 10,7 / 6,7 KW︱torque 32 / 21 Nm︱tool turret with 12 work positions ︱x-axis 50 mm︱z-axis 100 mm︱shaft cross cut 12x12 / 16x16 ︱feed x/z-axis 1 - 15000 mm/min︱Tool drive speed max. 1 - 6000 1/min︱work piece power 2,0 / 5,5 kW︱worktool support Frontapparat ︱no. of working stations 5 Stück︱
          Main and opposed spindle directly driven by spindle motors. Rotating drives in the turret and rear unit. Parts loading / unloading via handling system MHS1500 with pallet assembly X1, Z1: tool turret X3, Z3: front apparatus X4, Y4: rear apparatus Z4: opposed spindle S1: main spindle S4: opposed spindle S5: rotating tools turret S8: rotating tools rear apparatus X2, Z2, Y2, V2: loading portal Machine can be inspected under power.
            turning diameter 36 mm
            turning length 100 mm
            control TX8i
            bar capacity 36 mm
            main spindle speeds: 1 - 6300
            power capacity at 60% / 100 % lo. 10,7 / 6,7 KW
            torque 32 / 21 Nm
            spindle head DIN 55026 - Size 4
            Opposed spindle turning speed 1 - 6300 1/min.
            power capacity at 60% / 100 % lo. 10,7 / 6,7 KW
            torque 32 / 21 Nm
            x-axis 50 mm
            z-axis 100 mm
            shaft cross cut 12x12 / 16x16
            feed x/z-axis 1 - 15000 mm/min
            Tool drive speed max. 1 - 6000 1/min
            work piece power 2,0 / 5,5 kW
            worktool support Frontapparat
            no. of working stations 5 Stück
            Description :
            Main and opposed spindle directly driven by spindle motors.
            Rotating drives in the turret and rear unit.
            Parts loading / unloading via handling system MHS1500 with pallet assembly
            X1, Z1: tool turret
            X3, Z3: front apparatus
            X4, Y4: rear apparatus
            Z4: opposed spindle
            S1: main spindle
            S4: opposed spindle
            S5: rotating tools turret
            S8: rotating tools rear apparatus
            X2, Z2, Y2, V2: loading portal
            Machine can be inspected under power.
          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17387 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2002 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱travel -x axis 280 mm︱feed x-axis 0,1 - 30.000 mm/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1.150 mm︱Feed z- axis 0,1 - 60.000 mm / min.︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5.000 U/min︱tool turret - number of stations 12 ︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          was added to a centerlized cooling unit
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            travel -x axis 280 mm
            feed x-axis 0,1 - 30.000 mm/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1.150 mm
            Feed z- axis 0,1 - 60.000 mm / min.
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5.000 U/min
            tool turret - number of stations 12
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            was added to a centerlized cooling unit
          Datasheet
          Request / Contact
          used  CNC Lathe MAZAK SQR200M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17193 · CNC Lathe

          MAZAK - SQR200M - - 1998 - MAZATROL 640TE

          Technical details
          turning diameter 276 mm︱turning length 610 mm︱control MAZATROL 640TE ︱swing diameter 585 mm︱spindle turning speed - stepless 10 - 5.000 U/min︱spindle drive 22 / 15 kW︱max. torque on the spindle max. 350 Nm︱spindle bore 61 mm︱max. bar diameter 51 mm︱turret 1 (x-stations) 16 ︱x-travel 190 mm︱z-travel 645 mm︱feed X/Z-axis 1 - 30.000 mm/min︱work piece power 3,70 kW︱toolpiece turning speed range 10 - 4.500 U/min︱tool-size (OD turning) 25 mm︱Bit diameter max. 13 mm︱thread boring diameter M8 mm︱end mill cutter Ø16 mm︱turret 2 (x-stations) 12
          CNC Lathe with MAZATROL 640TE control; coolant unit; tail-stock; 2 Turrets - Turret 1 with 16 station and powered tools, Turret 2 with 12 stations.
            turning diameter 276 mm
            turning length 610 mm
            control MAZATROL 640TE
            swing diameter 585 mm
            spindle turning speed - stepless 10 - 5.000 U/min
            spindle drive 22 / 15 kW
            max. torque on the spindle max. 350 Nm
            spindle bore 61 mm
            max. bar diameter 51 mm
            turret 1 (x-stations) 16
            x-travel 190 mm
            z-travel 645 mm
            feed X/Z-axis 1 - 30.000 mm/min
            work piece power 3,70 kW
            toolpiece turning speed range 10 - 4.500 U/min
            tool-size (OD turning) 25 mm
            Bit diameter max. 13 mm
            thread boring diameter M8 mm
            end mill cutter Ø16 mm
            turret 2 (x-stations) 12
            Description :
            CNC Lathe with MAZATROL 640TE control; coolant unit; tail-stock;
            2 Turrets - Turret 1 with 16 station and powered tools,
            Turret 2 with 12 stations.
          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 300 MY


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71320 · CNC Lathe

          HURON - JYOTI - AX 300 MY - - - Siemens 828 D SL

          Technical details
          650 mm︱ 420 mm︱ 600 mm︱ 250 / 625 mm︱ +/- 50 mm︱ 24 mm︱ 30 mm︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 4.000 U/min︱spindle nose A²8 ︱tool turret - number of stations 12 ︱tool taper BMT 65 ︱toolpiece turning speed range 4.000 U/min︱Dimensions (HxWxD) 4.770 x 2.050 x 2.205 mm︱weight of the machine ca. 6,5 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            650 mm
            420 mm
            600 mm
            250 / 625 mm
            +/- 50 mm
            24 mm
            30 mm
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 4.000 U/min
            spindle nose A²8
            tool turret - number of stations 12
            tool taper BMT 65
            toolpiece turning speed range 4.000 U/min
            Dimensions (HxWxD) 4.770 x 2.050 x 2.205 mm
            weight of the machine ca. 6,5 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 300


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71300 · CNC Lathe

          HURON - JYOTI - AX 300 - - - Siemens 828 D SL

          Technical details
          675 mm︱ 420 mm︱ 600 mm︱tavel x / z - turret 1 250 / 625 mm︱ +/- 50 mm︱Rapid traverse 24 m/min︱rapid traverse Z-axis 30 m/min︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 4.000 U/min︱spindle nose A²8 ︱tool turret - number of stations 12 ︱Dimensions (HxWxD) 4.950 x 2.000 x 2.210 mm︱weight of the machine ca. 6,5 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            675 mm
            420 mm
            600 mm
            tavel x / z - turret 1 250 / 625 mm
            +/- 50 mm
            Rapid traverse 24 m/min
            rapid traverse Z-axis 30 m/min
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 4.000 U/min
            spindle nose A²8
            tool turret - number of stations 12
            Dimensions (HxWxD) 4.950 x 2.000 x 2.210 mm
            weight of the machine ca. 6,5 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 300 M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71310 · CNC Lathe

          HURON - JYOTI - AX 300 M - - - Siemens 828 D SL

          Technical details
          X mm︱ 480 mm︱ 600 mm︱ 250 / 625 mm︱Rapid traverse 24 m/min︱rapid traverse Z-axis 30 m/min︱ +/- 50 mm︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 4.000 U/min︱spindle nose A²8 ︱tool turret - number of stations 12 ︱tool taper BMT 65 ︱toolpiece turning speed range 4.500 U/min︱Dimensions (HxWxD) 4.770 x 2.050 x 2.205 mm︱weight of the machine ca. 6,5 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            X mm
            480 mm
            600 mm
            250 / 625 mm
            Rapid traverse 24 m/min
            rapid traverse Z-axis 30 m/min
            +/- 50 mm
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 4.000 U/min
            spindle nose A²8
            tool turret - number of stations 12
            tool taper BMT 65
            toolpiece turning speed range 4.500 U/min
            Dimensions (HxWxD) 4.770 x 2.050 x 2.205 mm
            weight of the machine ca. 6,5 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 300 MSY


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71330 · CNC Lathe

          HURON - JYOTI - AX 300 MSY - - - Siemens 828 D SL

          Technical details
          650 mm︱ 420 mm︱ 600 mm︱ 250 / 625 mm︱ +/- 50 mm︱ 24 mm︱ 30 mm︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 4.000 U/min︱spindle nose A²6 ︱tool turret - number of stations 12 ︱tool taper BMT 65 ︱toolpiece turning speed range 4.000 U/min︱Opposed spindle turning speed 5.000 U/min︱Dimensions (HxWxD) 5.050 x 2.050 x 2.205 mm︱weight of the machine ca. 6,7 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            650 mm
            420 mm
            600 mm
            250 / 625 mm
            +/- 50 mm
            24 mm
            30 mm
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 4.000 U/min
            spindle nose A²6
            tool turret - number of stations 12
            tool taper BMT 65
            toolpiece turning speed range 4.000 U/min
            Opposed spindle turning speed 5.000 U/min
            Dimensions (HxWxD) 5.050 x 2.050 x 2.205 mm
            weight of the machine ca. 6,7 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI DX 200


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71200 · CNC Lathe

          HURON - JYOTI - DX 200 - - - Siemens 828 D Basic T

          Technical details
          turning diameter over bed 500 mm︱tavel x / z - turret 1 200 / 500 mm︱rapid traverse x + z axis 24 m/min︱turning length 500 mm︱control Siemens 828 D Basic T ︱bar material dia. max. 52 mm︱turning speeds 50 - 4.000 U/min︱spindle bore 70 mm︱spindle nose A²6 ︱tool turret - number of stations 8 ︱Dimensions (HxWxD) 2.690 x 1.635 x 1.580 mm︱weight of the machine ca. 3,9 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            turning diameter over bed 500 mm
            tavel x / z - turret 1 200 / 500 mm
            rapid traverse x + z axis 24 m/min
            turning length 500 mm
            control Siemens 828 D Basic T
            bar material dia. max. 52 mm
            turning speeds 50 - 4.000 U/min
            spindle bore 70 mm
            spindle nose A²6
            tool turret - number of stations 8
            Dimensions (HxWxD) 2.690 x 1.635 x 1.580 mm
            weight of the machine ca. 3,9 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 200 MSY


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71430 · CNC Lathe

          HURON - JYOTI - AX 200 MSY - - - Siemens 828 D SL

          Technical details
          550 mm︱ 330 mm︱ 625 mm︱ 200 / 625 mm︱ +/- 40 mm︱ 24 mm︱ 35 mm︱control Siemens 828 D SL ︱bar material dia. max. 52 mm︱turning speeds 5.000 U/min︱spindle nose A²6 ︱tool turret - number of stations 12 ︱tool taper BMT 45 ︱toolpiece turning speed range 4.500 U/min︱Opposed spindle turning speed 5.000 U/min︱Dimensions (HxWxD) 3.220 x 1.735 x 1.960 mm︱weight of the machine ca. 5,0 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            550 mm
            330 mm
            625 mm
            200 / 625 mm
            +/- 40 mm
            24 mm
            35 mm
            control Siemens 828 D SL
            bar material dia. max. 52 mm
            turning speeds 5.000 U/min
            spindle nose A²6
            tool turret - number of stations 12
            tool taper BMT 45
            toolpiece turning speed range 4.500 U/min
            Opposed spindle turning speed 5.000 U/min
            Dimensions (HxWxD) 3.220 x 1.735 x 1.960 mm
            weight of the machine ca. 5,0 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 200


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71400 · CNC Lathe

          HURON - JYOTI - AX 200 - - - Siemens 828 D SL

          Technical details
          X mm︱ 370 mm︱ 325 oder 625 mm︱tavel x / z - turret 1 200 / 325 oder 625 mm︱ +/- 50 mm︱Rapid traverse 24 m/min︱rapid traverse Z-axis 35 m/min︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 5000 U/min︱spindle nose A²6 ︱tool turret - number of stations 12 ︱Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm︱weight of the machine ca. 4,5 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            X mm
            370 mm
            325 oder 625 mm
            tavel x / z - turret 1 200 / 325 oder 625 mm
            +/- 50 mm
            Rapid traverse 24 m/min
            rapid traverse Z-axis 35 m/min
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 5000 U/min
            spindle nose A²6
            tool turret - number of stations 12
            Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm
            weight of the machine ca. 4,5 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 200 MY


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71420 · CNC Lathe

          HURON - JYOTI - AX 200 MY - - - Siemens 828 D SL

          Technical details
          550 mm︱ 330 mm︱ 325 oder 625 mm︱ 200 / 325 oder 625 mm︱ +/- 40 mm︱ 24 mm︱ 35 mm︱control Siemens 828 D SL ︱bar material dia. max. 52 mm︱turning speeds 5.000 U/min︱spindle nose A²6 ︱tool turret - number of stations 12 ︱tool taper BMT 45 ︱toolpiece turning speed range 4.500 U/min︱Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm︱weight of the machine ca. 4,8 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            550 mm
            330 mm
            325 oder 625 mm
            200 / 325 oder 625 mm
            +/- 40 mm
            24 mm
            35 mm
            control Siemens 828 D SL
            bar material dia. max. 52 mm
            turning speeds 5.000 U/min
            spindle nose A²6
            tool turret - number of stations 12
            tool taper BMT 45
            toolpiece turning speed range 4.500 U/min
            Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm
            weight of the machine ca. 4,8 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact
          used  CNC Lathe HURON - JYOTI AX 200 M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-71410 · CNC Lathe

          HURON - JYOTI - AX 200 M - - - Siemens 828 D SL

          Technical details
          X mm︱ 370 mm︱ 325 oder 625 mm︱ 200 / 325 oder 625 mm︱Rapid traverse 24 m/min︱rapid traverse Z-axis 35 m/min︱ +/- 50 mm︱control Siemens 828 D SL ︱bar material dia. max. 65 mm︱turning speeds 5.000 U/min︱spindle nose A²6 ︱tool turret - number of stations 12 ︱tool taper BMT 45 ︱toolpiece turning speed range 4.500 U/min︱Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm︱weight of the machine ca. 4,6 t︱
          Main spindle: Conversion to air pressure to prevent that coolant come in spindle bearings (rust protection)
            X mm
            370 mm
            325 oder 625 mm
            200 / 325 oder 625 mm
            Rapid traverse 24 m/min
            rapid traverse Z-axis 35 m/min
            +/- 50 mm
            control Siemens 828 D SL
            bar material dia. max. 65 mm
            turning speeds 5.000 U/min
            spindle nose A²6
            tool turret - number of stations 12
            tool taper BMT 45
            toolpiece turning speed range 4.500 U/min
            Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm
            weight of the machine ca. 4,6 t
            Description :
            Main spindle: Conversion to air pressure to prevent that coolant come in
            spindle bearings (rust protection)

          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center GILDEMEISTER GMX 200 linear


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17616 · CNC Turning- and Milling Center

          GILDEMEISTER - GMX 200 linear - - 2005 - SIN 840 D

          Technical details
          turning diameter 560 mm︱turning length 1070 mm︱control SIN 840 D ︱tool taper Capto C6 ︱ tool magacine with 80 Plätzen︱Main spindle ISM90 ︱spindle passage 92 mm︱turning speeds 4.000 U/min︱power capacity at 60% / 100 % load 45 / 36 KW︱torque 600 / 750 Nm︱clamping chuck diameter 200 - 315 mm︱counter-spindle IMS65 ︱spindle passage 65 mm︱turning speeds 5000 U/min︱power capacity at 60% / 100 % load 37 / 25 KW︱torque 270 / 370 Nm︱clamping chuck diameter 200 - 315 mm︱spindle distance 1300 mm︱slide I: -- ︱x-axis 485 mm︱
          Machine with SIEMENS SINUMERIK 840D powerline control, main- and counter-spindle, coolant unit 20 bar 40 l/min, chip conveyor, dust exhauster IFS type IFM. Main-spindle: hollow clamping device Ø92mm, C-axis, 3-jaw hydraulic chuck Ø315mm Counter-spindle: partial hollow clamping device, C-axis, drawtube inside Ø 66mm x 675mm deep, 3-jaw hydraulic chuck Ø250mm, Tailstock function with mechatronic control, contact force max. 8KN can be selected by program Machine can be inspected under power.
            turning diameter 560 mm
            turning length 1070 mm
            control SIN 840 D
            tool taper Capto C6
            tool magacine with 80 Plätzen
            Main spindle ISM90
            spindle passage 92 mm
            turning speeds 4.000 U/min
            power capacity at 60% / 100 % lo. 45 / 36 KW
            torque 600 / 750 Nm
            clamping chuck diameter 200 - 315 mm
            counter-spindle IMS65
            spindle passage 65 mm
            turning speeds 5000 U/min
            power capacity at 60% / 100 % lo. 37 / 25 KW
            torque 270 / 370 Nm
            clamping chuck diameter 200 - 315 mm
            spindle distance 1300 mm
            slide I: --
            x-axis 485 mm
            Description :
            Machine with SIEMENS SINUMERIK 840D powerline control,
            main- and counter-spindle, coolant unit 20 bar 40 l/min,
            chip conveyor, dust exhauster IFS type IFM.
            Main-spindle: hollow clamping device Ø92mm, C-axis,
            3-jaw hydraulic chuck Ø315mm
            Counter-spindle: partial hollow clamping device, C-axis,
            drawtube inside Ø 66mm x 675mm deep,
            3-jaw hydraulic chuck Ø250mm,
            Tailstock function with mechatronic control,
            contact force max. 8KN can be selected by program
            Machine can be inspected under power.
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center WFL-MILLTURN M60x2000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17662 · CNC Turning- and Milling Center

          WFL-MILLTURN - M60x2000 - - 2000 - SIN 840 D

          Technical details
          turning diameter 670 mm︱turning length 2000 mm︱control SIN 840 D ︱z-axis 2150 mm︱Feed z- axis 1 - 20.000 mm / min︱rapid traverse Z-axis 20,00 m/min︱x-axis 700 mm︱feed x-axis 1 - 15.000 mm/min︱rapid traverse X-axis 15,00 m/min︱Main spindle S1 ︱Turning Speed - Range 1 8 - 825 U/min.︱Turning Speed - Range 2 33 - 3300 U/min.︱power capacity at 100 % load 40,00 kW︱spindle head DIN 55026 - Size A11 ︱spindle diameter in front bearing 160 mm︱spindle bore 115 mm︱C-axis 360 x 0,001 °︱milling spindle S2 ︱tool taper HSK A100 ︱turning speed range - stepless 10 - 4000 U/min︱
          With control SIEMENS SIN840D, 3-jaw hydraulic chuck SMW (Ø260mm), chip conveyor, coolant unit, steady SMW SLU-4. Tool measurement with Renishaw LP2H Workpiece measurement with Marposs E86 Various Tool Holders
            turning diameter 670 mm
            turning length 2000 mm
            control SIN 840 D
            z-axis 2150 mm
            Feed z- axis 1 - 20.000 mm / min
            rapid traverse Z-axis 20,00 m/min
            x-axis 700 mm
            feed x-axis 1 - 15.000 mm/min
            rapid traverse X-axis 15,00 m/min
            Main spindle S1
            Turning Speed - Range 1 8 - 825 U/min.
            Turning Speed - Range 2 33 - 3300 U/min.
            power capacity at 100 % load 40,00 kW
            spindle head DIN 55026 - Size A11
            spindle diameter in front bearin. 160 mm
            spindle bore 115 mm
            C-axis 360 x 0,001 °
            milling spindle S2
            tool taper HSK A100
            turning speed range - stepless 10 - 4000 U/min
            Description :
            With control SIEMENS SIN840D, 3-jaw hydraulic chuck SMW (Ø260mm),
            chip conveyor, coolant unit, steady SMW SLU-4.
            Tool measurement with Renishaw LP2H
            Workpiece measurement with Marposs E86
            Various Tool Holders
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled LÖW-SMAC K800-3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17609 · Lathe - cycle-controlled

          LÖW-SMAC - K800-3 - - 2004 - SIN802C

          Technical details
          turning diameter 800 mm︱turning length 3000 mm︱control SIN802C ︱swing over bed 810 mm︱swing diameter over slide rest 520 mm︱center height over square guideway 400 mm︱radial face slide travel 460 mm︱bed width 480 mm︱spindle head DIN 55027 - Size 11 ︱spindle diameter in front bearing 170 mm︱spindle bore 107 mm︱spindle turning speed - stepless 1 - 1800 U/min︱transmission ratio 2 ︱turning speed range 1. transmission ratio 1 - 325 U/min︱turning speed range 2. transmission ratio 5 - 1800 U/min︱drive capacity - spindle motor 17 / 25 kW︱longitudinal feed 0,01 - 3,00 mm/U︱face feed range 0,01 - 3,00 mm/U︱rapid travel - longitudinal/face 10 / 7 m/min︱power feed longitudinal 16500 N︱
          With cycle control SIEMENS Sinumerik 802C with cycles - limits - taper turning - radius turning - drilling - central - tapping - central - single and multiple grooving cycle / parting-off - thread cutting inside and outside - chip removal cycles A / B / C inside and outside Steel holder Multifix D, 3-jaw chuck Ø315mm and Ø250mm, steady, steel holders.
            turning diameter 800 mm
            turning length 3000 mm
            control SIN802C
            swing over bed 810 mm
            swing diameter over slide rest 520 mm
            center height over square guidew. 400 mm
            radial face slide travel 460 mm
            bed width 480 mm
            spindle head DIN 55027 - Size 11
            spindle diameter in front bearin. 170 mm
            spindle bore 107 mm
            spindle turning speed - stepless 1 - 1800 U/min
            transmission ratio 2
            turning speed range 1. transmiss. 1 - 325 U/min
            turning speed range 2. transmiss. 5 - 1800 U/min
            drive capacity - spindle motor 17 / 25 kW
            longitudinal feed 0,01 - 3,00 mm/U
            face feed range 0,01 - 3,00 mm/U
            rapid travel - longitudinal/face 10 / 7 m/min
            power feed longitudinal 16500 N
            Description :
            With cycle control SIEMENS Sinumerik 802C with cycles
            - limits
            - taper turning
            - radius turning
            - drilling - central
            - tapping - central
            - single and multiple grooving cycle / parting-off
            - thread cutting inside and outside
            - chip removal cycles A / B / C inside and outside
            Steel holder Multifix D, 3-jaw chuck Ø315mm and Ø250mm, steady,
            steel holders.
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled BOEHRINGER DNA 820/2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17592 · Lathe - cycle-controlled

          BOEHRINGER - DNA 820/2 - - 1980 - SIN 840 D

          Technical details
          turning diameter 1000 mm︱turning length 800 mm︱control SIN 840 D ︱turning diameter over slide rest 760 mm︱transmission ratio 4 ︱speeds 4 - 800 U/min︱spindle head DIN 55027 - Size 15 ︱total power requirement 37 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,0 x 3,0 x 2,65 m︱
          Clamping disc Ø 800 mm Electric Sauter 4-fold revolver 4 steel holders Chip conveyor Oil skimmer Coolant pump Fixators
            turning diameter 1000 mm
            turning length 800 mm
            control SIN 840 D
            turning diameter over slide rest 760 mm
            transmission ratio 4
            speeds 4 - 800 U/min
            spindle head DIN 55027 - Size 15
            total power requirement 37 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,0 x 3,0 x 2,65 m
            Description :
            Clamping disc Ø 800 mm
            Electric Sauter 4-fold revolver
            4 steel holders
            Chip conveyor
            Oil skimmer
            Coolant pump
            Fixators
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine WEISSER Univertor A-90L


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-16745 · Vertical Turning Machine

          WEISSER - Univertor A-90L - - 2001 - SINUMERIK 840D

          Technical details
          turning diameter 200 mm︱turning length 120 mm︱turning height 120 mm︱control SINUMERIK 840D ︱x-axis 400 mm︱z-axis 280 mm︱rapid power traverse in X-and Z direction 60 / 30 m/min︱feeding force 10 / 8 kN︱turning speeds 3000 U/min︱front bearing 90 mm︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 4,1 x 2,2 x 2,5 m︱
          SMW AUTOBLOC 3 chaw cuck Ø 210 mm
            turning diameter 200 mm
            turning length 120 mm
            turning height 120 mm
            control SINUMERIK 840D
            x-axis 400 mm
            z-axis 280 mm
            rapid power traverse in X-and Z . 60 / 30 m/min
            feeding force 10 / 8 kN
            turning speeds 3000 U/min
            front bearing 90 mm
            weight of the machine ca. 11 t
            dimensions of the machine ca. 4,1 x 2,2 x 2,5 m
            Description :
            SMW AUTOBLOC 3 chaw cuck Ø 210 mm
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DÖRRIES VCE1600


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17630 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE1600 - - 2000 - SIN840D

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1600 mm︱turning height 1500 mm︱Control SIN840D ︱workpiece weight 8000 kg︱ram stroke 1100 mm︱ram head dimension 250 x 250 mm︱cross rail adjustment 700 mm︱z-axis 1000 mm︱x-axis +/- 950 mm︱faceplate turning speed range -stepless- 1 - 400 U/min︱toolpiece turning speed range 1 - 3000 U/min︱tool taper ISO50 / Capto C6 ︱total power requirement 100,00 kW︱weight of the machine ca. 50,00 t︱dimensions of the machine ca. 6,40 x 4,90 x H5,00 m︱
          Machine with CNC SIEMENS 840 D - hydrostatic in X and Z-axes - autom. toolchanger for 40 tools - autom. head changer - angular milling head, grinding spindle, boring bar adpater and base holder for turning tools (Capto) - C-axis driven tools 1-3000 rpm 30 kW - adjustable crossrail positioning - coolant attachment with through spindle coolant - dust exhauster, chip conveyor and complete machine splash housing with outom. door and walkable working area - several toolholders system Capto
            faceplate diameter 1400 mm
            swing diameter 1600 mm
            turning height 1500 mm
            Control SIN840D
            workpiece weight 8000 kg
            ram stroke 1100 mm
            ram head dimension 250 x 250 mm
            cross rail adjustment 700 mm
            z-axis 1000 mm
            x-axis +/- 950 mm
            faceplate turning speed range -s. 1 - 400 U/min
            toolpiece turning speed range 1 - 3000 U/min
            tool taper ISO50 / Capto C6
            total power requirement 100,00 kW
            weight of the machine ca. 50,00 t
            dimensions of the machine ca. 6,40 x 4,90 x H5,00 m
            Description :
            Machine with CNC SIEMENS 840 D
            - hydrostatic in X and Z-axes
            - autom. toolchanger for 40 tools
            - autom. head changer
            - angular milling head, grinding spindle,
            boring bar adpater and base holder for turning tools (Capto)
            - C-axis driven tools 1-3000 rpm 30 kW
            - adjustable crossrail positioning
            - coolant attachment with through spindle coolant
            - dust exhauster, chip conveyor and complete machine splash housing
            with outom. door and walkable working area
            - several toolholders system Capto
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal DECKEL-MAHO DMC 80H linear


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17659 · Machining Center - Horizontal

          DECKEL-MAHO - DMC 80H linear - - 2005 - SIN840D

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 1050 mm︱Control SIN840D ︱spindle turning speed - stepless 1 - 18.000 U/min︱feeding force at 40 % ED 35,00 KW︱power capacity at 100 % load 25,00 kW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 100.000 mm/min︱rapid traverse X/Y/Z 100 m/min︱B - axis 360 x 0,001 °︱Table speed max. 90 U/min︱size of pallet 630 x 630 mm︱numbers of pallets 2 ︱workpiece weight 800 kg︱dimension of workpiece Ø900 x H1.000 mm︱tool magazin: 180 ︱tool diameter 80 mm︱wotkpiece diameter with 2 vacant positions 160 mm︱
          With control SIEMENS SINUMERIK 840D-powerline, motor spindle 18,000 rpm, NC rotary table with DirectDrive technology incl. hydr. clamping, chip conveyor, BALLUFF tool identification, oil and emulsion dust exhauster, coolant unit with coolant-through-ssindle (80 bar // 19 l / min), electron. handwheel, torque support, set-up station can be rotated automatically 4x90 ° - 2-hand operation, hydraulic clamping for workpiece on machining-table and set-up station.
            x-travel 800 mm
            y-travel 800 mm
            z-travel 1050 mm
            Control SIN840D
            spindle turning speed - stepless 1 - 18.000 U/min
            feeding force at 40 % ED 35,00 KW
            power capacity at 100 % load 25,00 kW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 100.000 mm/min
            rapid traverse X/Y/Z 100 m/min
            B - axis 360 x 0,001 °
            Table speed max. 90 U/min
            size of pallet 630 x 630 mm
            numbers of pallets 2
            workpiece weight 800 kg
            dimension of workpiece Ø900 x H1.000 mm
            tool magazin: 180
            tool diameter 80 mm
            wotkpiece diameter with 2 vacant. 160 mm
            Description :
            With control SIEMENS SINUMERIK 840D-powerline, motor spindle 18,000 rpm,
            NC rotary table with DirectDrive technology incl. hydr. clamping, chip conveyor,
            BALLUFF tool identification, oil and emulsion dust exhauster,
            coolant unit with coolant-through-ssindle (80 bar // 19 l / min),
            electron. handwheel, torque support,
            set-up station can be rotated automatically 4x90 ° - 2-hand operation,
            hydraulic clamping for workpiece on machining-table and set-up station.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER MCH-280


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17685 · Machining Center - Horizontal

          HELLER - MCH-280 - - 2003 - SIN840D

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control SIN840D ︱spindle turning speed - gearbox stage 1 45 - 1.700 1/min.︱spindle turning speed - gearbox stage 2 1.701 - 6.000 1/min.︱power capacity at 40 % load 43,00 KW︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X / Y - axes 15.000 N︱feed capacity Z - axes 17.500 N︱B - axis 360 x 1 °︱size of pallet 2x 630 x 630 mm︱workpiece weight 800 kg︱toolpiece magazine: chain magazine 50 Stück︱tool taper HSK 100 ︱tool diameter 112 mm︱wotkpiece diameter with 2 vacant positions 228 mm︱tool length - max. 450 mm︱total power requirement 62,00 kW︱
          Horizontal machining center with control SIEMENS SINUMERIK 840D, set-up station man. rotatable, hydr. workpiece clamping, broken tool control, The machine was connected to the central coolant supply, but is equipped with a high pressure pump (50 bar), coolant through the spindle, chip conveyor.
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 800 mm
            Control SIN840D
            spindle turning speed - gearbox . 45 - 1.700 1/min.
            spindle turning speed - gearbox . 1.701 - 6.000 1/min.
            power capacity at 40 % load 43,00 KW
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X / Y - axes 15.000 N
            feed capacity Z - axes 17.500 N
            B - axis 360 x 1 °
            size of pallet 2x 630 x 630 mm
            workpiece weight 800 kg
            toolpiece magazine: chain magazi. 50 Stück
            tool taper HSK 100
            tool diameter 112 mm
            wotkpiece diameter with 2 vacant. 228 mm
            tool length - max. 450 mm
            total power requirement 62,00 kW
            Description :
            Horizontal machining center with control SIEMENS SINUMERIK 840D,
            set-up station man. rotatable, hydr. workpiece clamping, broken tool control,
            The machine was connected to the central coolant supply, but is equipped
            with a high pressure pump (50 bar), coolant through the spindle,
            chip conveyor.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Perfil del comerciante: Amann Werkzeugmaschinen GmbH

          Contactar con el comerciante



            Amann GmbH Máquinas Herramienta
           Landshut carretera 1
            85716 Unterschleissheim
            Alemania
            (0049) 89 317754 0 "> (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de

          Perfil del comerciante

          Amann se fundó en 1969 y, a lo largo de los años, se ha desarrollado desde una pequeña empresa hasta convertirse en uno de los distribuidores de máquinas-herramienta más conocidos y confiables de Alemania.

          En 1988, construimos nuestras salas de producción y oficinas actuales en el norte de Munich. Hoy en día, en un área de exhibición de más de 5,000 m2, más de 500 premium de segunda mano y nuevas maquinas automáticas están disponibles para nuestros valiosos clientes en todo momento. Una expansión en tamaño y rango que nos ha permitido no solo servir al campo tradicional europeo, sino también al ambicioso y aún próximo mercado asiático. Nuestros clientes locales, regionales e internacionales valoran mucho nuestras máximas de altos estándares de calidad, fiabilidad alemana, servicios de alta calidad y precios justos por más de 40 años.

          Los contactos extensos con la industria a gran escala nos permiten encontrar casi cualquier herramienta de máquina para usted. Nuestro servicio especial: El servicio de búsqueda de Amann: con él, incluso las consultas de búsqueda altamente especializadas están en buenas manos con nosotros. Todo esto nos convierte en un socio eficiente, que opera a nivel internacional y satisface todas sus necesidades y deseos en el trabajo del metal.

          ¡Descubre las ventajas de trabajar con Amann!

          Amann es una de las principales direcciones para la mayor eficiencia económica. Especialmente para la industria automotriz (OEM y proveedores), aeroespacial, tecnología médica, fabricación de transmisiones, producción de bolas / rodamientos, ingeniería mecánica y tecnología de medición / control. Nuestra línea completa de productos abarca desde máquinas-herramienta convencionales hasta máquinas controladas por CNC. Tenemos en stock todas las máquinas (usadas y nuevas) que son esenciales para su producción: desde tornos, fresadoras, rectificadoras, máquinas cortadoras de engranajes, prensas, centros de mecanizado, máquinas de perforación y líneas completas de producción de cigüeñales hasta máquinas de procesamiento de chapa, como cizallas para placas. Frenos de prensa, máquinas dobladoras de rodillos, máquinas láser, punzonadoras, máquinas de pulido, y muchos más.

          Además, somos expertos en la distribución de líneas de fabricación complejas y en instalaciones operativas completas. Nuestras máquinas herramienta de segunda mano llevan los nombres de fabricantes de renombre como: Aba, Amada, Boeringer, DMG, Doerries, Durma, EHT, Elb, Gleason, Hurth, Ingersoll, Jung, Klingenberg, Liebherr, Lorenz, LVD, Matec, Mazak, Mori Seiki, Müller-Weingarten, Nosstek, Oerlikon, Pfauter, Reisshauer, Schaudt, Schieser, Schuler, Studer, Soraluce, Timesaver, TOS, Trumpf, Schuler, Union, Weiler, Weinbrenner, WFL y Wotan ..

          Oficina y almacén 
          Landshuter Str. 1 - 85716 Unterschleissheim / Muenchen 
          Alemania
          Teléfono
          +49 89 317754-0
          Fax 
          +49 89 317754-99
          Correo electrónico 
          Todas las consultas y ofertas para: info@amann-wzm.de
          Sr. Bobe
          Gerente general 
          Señora amann
          Firmante autorizado
          Sr. Haertl
          Gerente de Ventas Europa / Africa 
          Sr. Berchner
          Gerente de Ventas Medio Oriente / Asia 
          Sr. Nagel
          Gerente de Ventas Medio Oriente / Asia 
          Señora krappel
          Asistente de ventas 
          Señora juelicher
          Asistente de ventas 




          Amann Werkzeugmaschinen GmbH   85716 Unterschleißheim Landshuter Straße 1 Deutschland
          Amann Werkzeugmaschinen GmbH

          Landshuter Straße 1



          Contact Trader


            Amann Werkzeugmaschinen GmbH
           Landshuter Straße 1
            85716 Unterschleißheim
            Deutschland
            (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de
            Contact person:
          Herrn Alois Kindermann 08931775420

            Auf 5000 m² Ausstellungsfläche stehen ständig mehr als 500 moderne gebrauchte Werkzeugmaschinen für unsere Kunden zu Verfügung.




          Machine category


          1-Ständer - Ziehpresse - Hydraulisch · Abgratpresse · Abrichtgerät · Absaugung · Aufspannplatte · Bandsäge - Automatisch · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Biegemaschine horizontal · Bürstenentgrater · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydr.-Dualform · Doppelständerziehpresse - Hydraulisch · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Ersatzteile · Exzenterpresse - Einständer · Fahrständerfräsmaschine · Fräsmaschine - Universal · Gewinderollmaschine · Gleitschleifanlage · Hydraulische Presse · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Einständer · Kegelradschleifmaschine · Kettenzug - elektrisch · Kompressor · Konsolfräsmaschine · Koordinatenmeßmaschine · Kreissägenautomat · Kurbelwellen-Hublagerschleifmaschine · Ladeportal · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelbohrmaschine · Messerköpfe · Messmaschine · Nockenwellenschleifmaschine · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Profilbearbeitungszentrum · Profilschleifmaschine · Reitstock · Richtpresse - Einständer · Rundschleifmaschine - Außen · Schmiedehammer · Schnellradialbohrmaschine · Schraubenkompressor · Spiralkegelradschneidmaschine · Spitzendrehbank · Späneförderer · Stanzautomat-Doppelständer · Superfinishmaschine · Turbinenschaufelfräsmaschine · Tuschierpresse · Vertikaldrehmaschine · Waschanlage - Kammer · Werkstattpresse - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Werkzeugschrank · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradentgratmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zubehör · Zweiflanken-Wälzprüfmaschine · Ölnebel-Abscheider · Ölzentrifuge ·