Red europea de distribuidores de maquinaria de almacenamiento.

Categoría
    Fabricante:
      máquinas:
        Comerciante:

          ATMH Werkzeugmaschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe LANGE 3000mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1078 · Center Lathe

          LANGE - 3000mm - - unbekannt -

          Technical details
          turning diameter over bed / mm︱turning diameter over slide rest / mm︱turning length 3000 mm︱
            turning diameter over bed / mm
            turning diameter over slide rest / mm
            turning length 3000 mm
          Datasheet
          Request / Contact
          used  Center Lathe VDF-BOEHRINGER DUE 630


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1022 · Center Lathe

          VDF-BOEHRINGER - DUE 630 - - 1990 -

          Technical details
          turning length 5000 mm︱swing diameter over bed slide 700 mm︱bed width 450mm mm︱total power requirement 22 kW︱weight of the machine ca. ca. 8-9 t︱required space / m︱
            turning length 5000 mm
            swing diameter over bed slide 700 mm
            bed width 450mm mm
            total power requirement 22 kW
            weight of the machine ca. ca. 8-9 t
            required space / m
          Datasheet
          Request / Contact
          used  Center Lathe TOS SUS63 x 8000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1009 · Center Lathe

          TOS - SUS63 x 8000 - - 1979 -

          Technical details
          turning diameter over bed 655 mm︱turning diameter over slide rest 390 mm︱turning length 8150 mm︱peak load 6 t︱total power requirement 18,5 kW︱
            turning diameter over bed 655 mm
            turning diameter over slide rest 390 mm
            turning length 8150 mm
            peak load 6 t
            total power requirement 18,5 kW
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe ATMH CST-46160


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1279 · CNC Lathe

          ATMH - CST-46160 - - 2018 - Siemens 828 D

          Technical details
          turning diameter 1270 mm︱turning length 4300 mm︱control Siemens 828 D ︱total power requirement 22/26 kW︱weight of the machine ca. 14,8 t︱dimensions of the machine ca. 8,9 x 3 x 2,75 m︱
          Turning diameter 1270 mm Turning length 4300 mm Control Siemens 828 D Turning diameter over slide rest 880 mm Spindle speeds 1 - 680 rpm Longitudinal feeds: 0.001-500 mm / rev Cross feeds: 0.001-500 mm / rev Spindle passage 153 mm Rapid traverse - longitudinal / flat 10/8 m / min Switching stages 4 Cross slide travel 680 mm Workpiece weight between centers max. 8000 kg Total power requirement 22/26 kW Machine weight approx. 14.8 t Space requirement approx. 8.9 x 3 x 2.75 m Flatbed machine! Machine housing (CE conform), 8 positions Sauter revolver, three-jaw chuck, chip conveyor and Bezel. Control: Siemens 828 D
            turning diameter 1270 mm
            turning length 4300 mm
            control Siemens 828 D
            total power requirement 22/26 kW
            weight of the machine ca. 14,8 t
            dimensions of the machine ca. 8,9 x 3 x 2,75 m
            Description :
            Turning diameter 1270 mm
            Turning length 4300 mm
            Control Siemens 828 D
            Turning diameter over slide rest 880 mm
            Spindle speeds 1 - 680 rpm
            Longitudinal feeds: 0.001-500 mm / rev
            Cross feeds: 0.001-500 mm / rev
            Spindle passage 153 mm
            Rapid traverse - longitudinal / flat 10/8 m / min
            Switching stages 4
            Cross slide travel 680 mm
            Workpiece weight between centers max. 8000 kg
            Total power requirement 22/26 kW
            Machine weight approx. 14.8 t
            Space requirement approx. 8.9 x 3 x 2.75 m

            Flatbed machine! Machine housing (CE
            conform), 8 positions Sauter revolver, three-jaw chuck, chip conveyor and
            Bezel. Control: Siemens 828 D


          Datasheet
          Request / Contact
          used  CNC Lathe HESSAPP VERTIKAL - DV90 / WZW


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1073 · CNC Lathe

          HESSAPP - VERTIKAL - DV90 / WZW - - 1993 - Siemens Sinumerik

          Technical details
          turning diameter / mm︱turning length / mm︱control Siemens Sinumerik ︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            turning diameter / mm
            turning length / mm
            control Siemens Sinumerik
            total power requirement / kW
            weight of the machine ca. / t
            required space / m
          Datasheet
          Request / Contact
          used  CNC Lathe VOEST-ALPINE WNE 490/570


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1702 · CNC Lathe

          VOEST-ALPINE - WNE 490/570 - - 1986 - /

          Technical details
          turning diameter 600 mm︱turning length 2000 mm︱control / ︱total power requirement 22 kW︱weight of the machine ca. / t︱required space / m︱
            turning diameter 600 mm
            turning length 2000 mm
            control /
            total power requirement 22 kW
            weight of the machine ca. / t
            required space / m
          Datasheet
          Request / Contact
          used  CNC Lathe VOEST-ALPINE WNC722/4500


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1703 · CNC Lathe

          VOEST-ALPINE - WNC722/4500 - - 1986 - Siemens Sinumerik 810

          Technical details
          turning length 4500 mm︱turning diameter over bed 750 mm︱turning diameter over slide 430 mm︱control Siemens Sinumerik 810 ︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            turning length 4500 mm
            turning diameter over bed 750 mm
            turning diameter over slide 430 mm
            control Siemens Sinumerik 810
            total power requirement / kW
            weight of the machine ca. / t
            required space / m
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MAZAK Variaxis 500X-5X


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1003 · CNC Turning- and Milling Center

          MAZAK - Variaxis 500X-5X - - 05-2005 - Mazatrol 640M-5X

          Technical details
          turning diameter / mm︱turning length / mm︱control Mazatrol 640M-5X ︱axis stroke (X,Y,Z) 510x510x460 mm︱Number of tools 40 St.︱Year 05-2005 ︱working length X 510 mm︱Speed 35-12000 U/min.︱working length Y 510 mm︱working depth Z 460 mm︱Number of axles 5 St.︱Overall size L= 2800 B= 2500 H= 2400 mm︱total power requirement 55 kW︱weight of the machine ca. 7500 t︱
            turning diameter / mm
            turning length / mm
            control Mazatrol 640M-5X
            axis stroke (X,Y,Z) 510x510x460 mm
            Number of tools 40 St.
            Year 05-2005
            working length X 510 mm
            Speed 35-12000 U/min.
            working length Y 510 mm
            working depth Z 460 mm
            Number of axles 5 St.
            Overall size L= 2800 B= 2500 H= 2400 mm
            total power requirement 55 kW
            weight of the machine ca. 7500 t
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe WALDRICH-SIEGEN WDS 3000x11000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-M1486 · Heavy Duty Lathe

          WALDRICH-SIEGEN - WDS 3000x11000 - - unbekannt -

          Technical details
          Intern No: M14101486 ︱turning diameter over slide rest 2600 mm︱turning length 11000 mm︱turning diameter over bed 3300 mm︱weight of the machine ca. 120 t︱
          Waldrich Siegen WDS 3000x11000 Max turning diameter: 3300 mm Max turning diameter over slide: 2600 mm Max turning length: 11000 mm Number of bed slide: 2 Outer diameter faceplate: 3000 mm Speed ??range: 0.67-55 rpm Workpiece weight between the tops: 45-50 t when using steady rest: 60-70 t Weight: 120 t Equipment: Grinding unit, dust extraction, 3 pieces steady rests On both sliders 4-axis digital display from Heidenhain. Price without tail stock Freight loading on truck A tailstock can be reproduced by us, price on request.
            Intern No: M14101486
            turning diameter over slide rest 2600 mm
            turning length 11000 mm
            turning diameter over bed 3300 mm
            weight of the machine ca. 120 t
            Description :
            Waldrich Siegen
            WDS 3000x11000


            Max turning diameter: 3300 mm
            Max turning diameter over slide: 2600 mm
            Max turning length: 11000 mm
            Number of bed slide: 2
            Outer diameter faceplate: 3000 mm
            Speed ??range: 0.67-55 rpm
            Workpiece weight between the tops: 45-50 t
            when using steady rest: 60-70 t

            Weight: 120 t

            Equipment:
            Grinding unit, dust extraction, 3 pieces steady rests
            On both sliders 4-axis digital display from Heidenhain.

            Price without tail stock

            Freight loading on truck

            A tailstock can be reproduced by us, price on request.
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled GORNATI CMG 750 NSXP


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-WA1486 · Lathe - cycle-controlled

          GORNATI - CMG 750 NSXP - - 1999 - Fagor 8055 T

          Technical details
          turning diameter 1500 mm︱turning length 1500 mm︱control Fagor 8055 T ︱turning diameter over bed slide 1250 mm︱total power requirement 45 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4 x 2,4 x 2x4 m︱
            turning diameter 1500 mm
            turning length 1500 mm
            control Fagor 8055 T
            turning diameter over bed slide 1250 mm
            total power requirement 45 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4 x 2,4 x 2x4 m
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic VDF-WOHLENBERG Schwerlast Drehbank 1200x3000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1019 · lathe-conventional-electronic

          VDF-WOHLENBERG - Schwerlast Drehbank 1200x3000 - - 2001 -

          Technical details
          turning diameter 1200 mm︱turning length 3000 mm︱swing diameter over bed slide / mm︱
            turning diameter 1200 mm
            turning length 3000 mm
            swing diameter over bed slide / mm
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic WEISSER-HEILBRONN Hektor


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1020 · lathe-conventional-electronic

          WEISSER-HEILBRONN - Hektor - - 1988 -

          Technical details
          turning diameter / mm︱turning length / mm︱swing diameter over bed slide / mm︱total power requirement / kW︱weight of the machine ca. / t︱required space / m︱
            turning diameter / mm
            turning length / mm
            swing diameter over bed slide / mm
            total power requirement / kW
            weight of the machine ca. / t
            required space / m
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic WAGNER DCS180X900


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-H1021 · lathe-conventional-electronic

          WAGNER - DCS180X900 - - 1987 -

          Technical details
          turning diameter / mm︱turning length / mm︱swing diameter over bed slide / mm︱
            turning diameter / mm
            turning length / mm
            swing diameter over bed slide / mm
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine HESSAPP VDM 75-11


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1718 · Vertical Turning Machine

          HESSAPP - VDM 75-11 - - 1999 - Siemens 840D

          Technical details
          turning diameter 700 mm︱Control Siemens 840D ︱swing dia. 800 mm︱weight of the machine ca. 16 t︱
          Technical specifications Workspace Turning diameter: 700mm Swing diameter: 800mm Workpiece including clamping device Maximum axis speeds X-axis / s: 32000 mm / min Z-axis / s: 32000 mm / min C-axis / s: 7200 ° / min maximum speed main spindle: 6500 1 / min maximum auxiliary spindle: 3000 1 / min Main drive type 1PH7 186 Three-phase motor with digital control (IP54), Power transmission to the main spindle via gear transmission with two stepless Speed ??ranges with the characteristics: Spindle head according to DIN 55026 (short taper): size A15 Main spindle bearing diameter: 240mm Drive power: 100% ED KW 3.5 - 60 - 60 60% ED KW 4.5 - 80 - 80 Speed ??range 1: 8 - 112 - 280 rpm Speed ??range 2: 31 - 450 - 1120 rpm Rapid traverse vertical: 14000 mm / min Rapid traverse horizontal: 14000 mm / min Z-axis 37 Nm feed motor, make: Siemens 1F T6 100% ED = 23,000N 60% ED = 29,000N 40% ED = 38,000N X-axis 27 Nm feed motor, make: Siemens 1F T6 100% ED = 17,000N 60% ED = 21,000N 40% ED = 27,000N Power requirement Connected load: 90 kW Weight: 16 tons
            turning diameter 700 mm
            Control Siemens 840D
            swing dia. 800 mm
            weight of the machine ca. 16 t
            Description :
            Technical specifications

            Workspace
            Turning diameter: 700mm
            Swing diameter: 800mm
            Workpiece including clamping device

            Maximum axis speeds
            X-axis / s: 32000 mm / min
            Z-axis / s: 32000 mm / min
            C-axis / s: 7200 ° / min

            maximum speed main spindle: 6500 1 / min
            maximum auxiliary spindle: 3000 1 / min
            Main drive type 1PH7 186
            Three-phase motor with digital control (IP54),
            Power transmission to the main spindle via gear transmission with two stepless
            Speed ??ranges with the characteristics:

            Spindle head according to DIN 55026 (short taper): size A15
            Main spindle bearing diameter: 240mm

            Drive power: 100% ED KW 3.5 - 60 - 60
            60% ED KW 4.5 - 80 - 80

            Speed ??range 1: 8 - 112 - 280 rpm
            Speed ??range 2: 31 - 450 - 1120 rpm

            Rapid traverse vertical: 14000 mm / min
            Rapid traverse horizontal: 14000 mm / min

            Z-axis 37 Nm feed motor, make: Siemens 1F T6
            100% ED = 23,000N
            60% ED = 29,000N
            40% ED = 38,000N

            X-axis 27 Nm feed motor, make: Siemens 1F T6
            100% ED = 17,000N
            60% ED = 21,000N
            40% ED = 27,000N

            Power requirement
            Connected load: 90 kW
            Weight: 16 tons
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column RAFAMET KCF 320 / 350


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS2025 · Vertical Turret Lathe - Double Column

          RAFAMET - KCF 320 / 350 - - 2000 - Typ 840 D sl

          Technical details
          faceplate diameter 3200 mm︱swing diameter 3500 mm︱turning height 2200 mm︱range L-W-H 7730 x 6240 x 6700 mm︱control Typ 840 D sl ︱voltage 3 x 400 V︱frequency 50 Hz︱turning speeds 0,8 - 40 U/min︱max. turning diameter 3500 mm︱total power requirement 51 kW︱weight of the machine ca. 86 t︱
            faceplate diameter 3200 mm
            swing diameter 3500 mm
            turning height 2200 mm
            range L-W-H 7730 x 6240 x 6700 mm
            control Typ 840 D sl
            voltage 3 x 400 V
            frequency 50 Hz
            turning speeds 0,8 - 40 U/min
            max. turning diameter 3500 mm
            total power requirement 51 kW
            weight of the machine ca. 86 t
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column WMW -


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1038 · Vertical Turret Lathe - Double Column

          WMW - - - - 1980 -

          Technical details
          faceplate diameter / mm︱swing diameter / mm︱turning height / mm︱
          Year of construction: 1980, complete construction (mechanical and electrical) 1998 Control: Siemens Sinumerik 840T X: Face plate Ø 2400mm / max. Ø 2920mm / remove cover Ø 3010mm Z: 900mm W-slide travel: 900mm Accuracy: +/- 0.1mm Drive power: 60kW Additional equipment: Max. Workpiece height: 1820mm Max. Workpiece weight: 20 t Tool change / locations: NO Particularities: For pre-turning work, no coolant devices Type: turning Machine condition: According to age, is operated in 1 shift
            faceplate diameter / mm
            swing diameter / mm
            turning height / mm
            Description :
            Year of construction: 1980, complete construction (mechanical and electrical)
            1998
            Control: Siemens Sinumerik 840T
            X: Face plate Ø 2400mm / max. Ø 2920mm / remove cover Ø 3010mm
            Z: 900mm
            W-slide travel: 900mm
            Accuracy: +/- 0.1mm
            Drive power: 60kW
            Additional equipment:
            Max. Workpiece height: 1820mm
            Max. Workpiece weight: 20 t
            Tool change / locations: NO
            Particularities:
            For pre-turning work, no coolant devices
            Type: turning
            Machine condition: According to age, is operated in 1 shift
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DÖRRIES SCHARMANN VCE 2000


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1036 · Vertical Turret Lathe - Single Column

          DÖRRIES SCHARMANN - VCE 2000 - - 1995 -

          Technical details
          faceplate diameter / mm︱swing diameter / mm︱turning height / mm︱
          Control: Siemens Sinumerik 880T X: Ø2100mm / face plate Ø1800mm Z: 900 mm W-slide travel: 1500mm Accuracy: +/- 0.02mm Drive power: 65kW Additional equipment: turning height under normal chisel holder 1440mm, min. Ø340mm Tool change / places: Yes / 20 pick-ups Special features: driven tools and angle head 90 ° ISO 50 Art: turning Machine condition: According to age, currently Out of order
            faceplate diameter / mm
            swing diameter / mm
            turning height / mm
            Description :
            Control: Siemens Sinumerik 880T
            X: Ø2100mm / face plate Ø1800mm
            Z: 900 mm
            W-slide travel: 1500mm
            Accuracy: +/- 0.02mm
            Drive power: 65kW
            Additional equipment: turning height under normal chisel holder 1440mm, min.
            Ø340mm
            Tool change / places: Yes / 20 pick-ups
            Special features: driven tools and angle head 90 ° ISO 50
            Art: turning
            Machine condition: According to age, currently Out of order
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine FLOTT 4 STW


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A36567 · Bench Drilling Machine

          FLOTT - 4 STW - - unbekannt -

          Technical details
          bore capacity in steel (diameter) / mm︱throat / mm︱bore stroke 70 mm︱total power requirement 0,9 kW︱
            bore capacity in steel (diameter. / mm
            throat / mm
            bore stroke 70 mm
            total power requirement 0,9 kW
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine STANKO 2K51-1


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1026 · Radial Drilling Machine

          STANKO - 2K51-1 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) / mm︱arm length / mm︱workpiece height max. / mm︱
          CLAMPING AREA Horizontal: 360x500mm Vertical: 400x500mm Groove width: 14H12mm Groove distance: 100mm Power: 1.5kW Spindle speed: 1600 min-1 Number of spindle power feeds: 3 Greatest feed force: 5000 Column diameter: 180mm Weight: 1250kg dimension Length: 1760mm Width: 915mm Height: 1970mm
            bore capacity in steel (diameter. / mm
            arm length / mm
            workpiece height max. / mm
            Description :
            CLAMPING AREA
            Horizontal: 360x500mm
            Vertical: 400x500mm
            Groove width: 14H12mm
            Groove distance: 100mm

            Power: 1.5kW
            Spindle speed: 1600 min-1
            Number of spindle power feeds: 3
            Greatest feed force: 5000
            Column diameter: 180mm

            Weight: 1250kg

            dimension
            Length: 1760mm
            Width: 915mm
            Height: 1970mm
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine REXON RDM 80 B


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-AS1512 · Upright Drilling Machine

          REXON - RDM 80 B - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 20 mm︱turning speeds Max. 2580 U/min︱tool adaptor MK2 ︱weight of the machine ca. 0,05 t︱
            bore capacity in steel (diameter. 20 mm
            turning speeds Max. 2580 U/min
            tool adaptor MK2
            weight of the machine ca. 0,05 t
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Universal

          used  Bed Type Milling Machine - Universal BUTLER ELGAMILL


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1858 · Bed Type Milling Machine - Universal

          BUTLER - ELGAMILL - - 1990 - /

          Technical details
          x-travel 8200 mm︱y-travel 1670 mm︱z-travel 1050 mm︱control / ︱total power requirement / kW︱weight of the machine ca. / t︱dimensions of the machine ca. / m︱
          • Year of construction: 1990 • Bed length: 10 m • Longitudinal run (X-axis): 8,200 mm • Vertical run (Y-axis): 1,170 or 1,670 mm • Headstock run (Z-axis): 1,050 mm • Table length: 10,000 mm increasing by 1,000 mm each time • Table width: 1,030 mm • Table height: 765 mm • Spindle motor: 22 or 30 kW • Spindle nose cone: ISO No. 50 • Spindle speeds: infinitely variable up to 3000 rpm • Control type: Heidenhain 355 with 4th axis - see photos - Attention, the mounted magnets and vices are not included in the scope of delivery.
            x-travel 8200 mm
            y-travel 1670 mm
            z-travel 1050 mm
            control /
            total power requirement / kW
            weight of the machine ca. / t
            dimensions of the machine ca. / m
            Description :
            • Year of construction: 1990
            • Bed length: 10 m
            • Longitudinal run (X-axis): 8,200 mm
            • Vertical run (Y-axis): 1,170 or 1,670 mm
            • Headstock run (Z-axis): 1,050 mm
            • Table length: 10,000 mm
            increasing by 1,000 mm each time
            • Table width: 1,030 mm
            • Table height: 765 mm
            • Spindle motor: 22 or 30 kW
            • Spindle nose cone: ISO No. 50
            • Spindle speeds: infinitely variable up to 3000 rpm
            • Control type: Heidenhain 355
            with 4th axis - see photos -
            Attention, the mounted magnets and vices are not included in the scope of
            delivery.
          Datasheet
          Request / Contact

          Bed Type Milling Machine - Vertical

          used  Bed Type Milling Machine - Vertical ZAYER 8000CM


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1817 · Bed Type Milling Machine - Vertical

          ZAYER - 8000CM - - unbekannt -

          Technical details
          x-travel 8000 mm︱y-travel 1000 mm︱z-travel 2000 mm︱spindle taper ISO 50
          X-axis: 8000 mm Y-axis: 1500 mm Z-axis: 2000 mm Spindle mount: ISO 50 For more data see pictures The machine is sold without a table. Optionally we offer a clamping table L: 10000 mm x W: 2000 mm.
            x-travel 8000 mm
            y-travel 1000 mm
            z-travel 2000 mm
            spindle taper ISO 50
            Description :
            X-axis: 8000 mm
            Y-axis: 1500 mm
            Z-axis: 2000 mm
            Spindle mount: ISO 50

            For more data see pictures

            The machine is sold without a table.
            Optionally we offer a clamping table L: 10000 mm x W: 2000 mm.
          Datasheet
          Request / Contact
          used  Bed Type Milling Machine - Vertical MECOF CS 103


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1814 · Bed Type Milling Machine - Vertical

          MECOF - CS 103 - - 1989 -

          Technical details
          x-travel 3250 mm︱y-travel 1675 mm︱z-travel 950 mm︱
          MECOF CS 103 Year of construction: 1989/2008 Technical specifications: Travels: X axis: 3250mm Y axis: 1675mm Z axis: 950mm Table: 5000x1100mm Spindle: 1800 rpm (SK50) Rapid traverse 6000mm / min Control: Heidenhain TNC426 (retrofit - 2008)
            x-travel 3250 mm
            y-travel 1675 mm
            z-travel 950 mm
            Description :
            MECOF CS 103
            Year of construction: 1989/2008
            Technical specifications:
            Travels:
            X axis: 3250mm
            Y axis: 1675mm
            Z axis: 950mm
            Table: 5000x1100mm
            Spindle: 1800 rpm (SK50)
            Rapid traverse 6000mm / min
            Control: Heidenhain TNC426 (retrofit -
            2008)
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal DECKEL-MAHO DMU 60 T


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-10163 · milling machining centers - universal

          DECKEL-MAHO - DMU 60 T - - 2000 -

          Technical details
          x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱turning speeds 12.000 U/min︱feed speeds 20-10.000 mm/min︱table surface area 1000x600 mm︱spindle taper SK40 ︱condition Gut Gebraucht ︱range L-W-H 500 x 200 x200 mm︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. m︱
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            turning speeds 12.000 U/min
            feed speeds 20-10.000 mm/min
            table surface area 1000x600 mm
            spindle taper SK40
            condition Gut Gebraucht
            range L-W-H 500 x 200 x200 mm
            weight of the machine ca. 6,5 t
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Atmh Werkzeugmaschinenhandel GmbH   58256 Ennepetal Scharpenbergerstr.96-98 Deutschland
          Atmh Werkzeugmaschinenhandel GmbH

          Scharpenbergerstr.96-98



          Contact Trader


            Atmh Werkzeugmaschinenhandel GmbH
           Scharpenbergerstr.96-98
            58256 Ennepetal
            Deutschland
            +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
            info@atmh.de
            www.atmh.de
            Contact person:

           




          Machine category


          · 3D Universal Messmaschine · Abgratpresse · Abkantpresse - hydraulisch · Abkantwerkzeuge · Absauganlage · Anreißplatte · Aufspannplatte · Aufspanntisch · Aufspannwinkel · Aufspannwürfel · Ausdrehkopf · Ausdrehsupport · Automatischer - Rundteiltisch · Bandschleifmaschine · Bandsäge · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbearbeitungszentrum · Bohrer · Bohrwerkstisch · Bügelmesschraube · Bügelsäge · Bügelsäge - Automatisch · Bördelmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Coil - Wende - Einrichtung · Doppelschleifbock · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydraulisch · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Drehmaschine-konventionell-elektronisch · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Elektronik / SPS-Steuerungen · Endenbearbeitungsmaschine · Entmagnetisierapparat · Exzenterpresse - Einständer · Exzenterpressen - Einständer · Filteranlage · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräs- und Drehwerkzeuge · Fräskopf senkrecht · Fräsmaschine - Universal · Futter · Führungsbahnenschleifmaschine · Handspindelpresse · Honmaschine - Außen - Horizontal · Härteprüfer · Innenmikrometer · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Keilnutenziehmaschine · Kettenzug - elektrisch · Kettenzug - von Hand · Kombinierte - Profilstahlschere · Kompressoren · Krananlage · Krananlagen · Krantraverse · Kreissäge - Automatisch · Kugellager · Kühlmittelpumpe · Lagerbehälter · Leit- und Zugspindeldrehmaschine · Lichtschranke · Luftgesenkhammer · Lynette · Längs- und Querteilanlage · Magnetförderband · Magnetspannplatte · Messerkopf · Messmaschine · Messplatte · Meßmittel · Motor · Planscheibe · Polierbock · Portalfräsmaschine · Profil- Ring- Biegemaschine · Querteilanlage · Radialbohrmaschine · Reitstock · Richtmaschine · Richtpresse - Doppelständer · Richtpresse - Einständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbock · Rundschleifmaschine · Rundtisch · Rundtisch - Schwenkbar · Schleifbock · Schnellhobler · Schnellwechsel Stahlhalter · Schrauben Kompressor · Schraubstock · Schweißkantenabschrägmaschine · Schweißmaschine - Rundnaht · Schweißmaschine Längsnaht u. Rundnaht · Schweißplatte · Schweißtisch · Schwenkbiegemaschine · Schwerdrehmaschine · Schwerlastregal · Senkerodiermaschine · Sonstige · Sonstige Fördertechnik · Sonstige Lagertechnik · Spanngerät · Spannmittel · Späneförderer · Stanzautomat-Doppelständer · Ständerbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tieflochbohrmaschine · Tischbohrmaschine · Transformator · Transportwagen · Vertikaldrehmaschine · Waage · Walzenstirnfräser · Wendeplattenfräser · Wendeschneidplatten · Werkzeug Voreinstellgerät · Werkzeughalter · Werkzeughalter (angetrieben) · Werkzeugwagen · Werkzeugwechselwagen · Winkelkopf · Winkeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zentrierspitze ·