,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Machines available immediately

          Machinelist: Machines available immediately


          Center Lathe

          used Machines available immediately Center Lathe ERNAULT-SOMUA HN 350


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23044 · Center Lathe

          ERNAULT-SOMUA - HN 350 - - -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 250 mm︱turning length 600 mm︱turning speeds 90 - 1600 U/min︱centre height 200 mm︱total power requirement 4,2 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,2 x 0,9 x 1,6 m︱
          Heidenhain digital readout.
            turning diameter over bed 380 mm
            turning diameter over slide rest 250 mm
            turning length 600 mm
            turning speeds 90 - 1600 U/min
            centre height 200 mm
            total power requirement 4,2 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2,2 x 0,9 x 1,6 m
            Description :
            Heidenhain digital readout.


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • 1.800 €
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Machines available immediately lathe-conventional-electronic KART E2N-750-R


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00349 · lathe-conventional-electronic

          KART - E2N-750-R - - 1969 - konventionell

          Technical details
          turning diameter 250 mm︱turning length 750 mm︱swing diameter over bed slide 250 mm︱total power requirement 2,3 kW︱weight of the machine ca. 0,7 t︱dimensions of the machine ca. 3,1x1,4x1,6 m︱
          We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide belt hose was guided. Then the parting width with the Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off. Center distance 750mm Center height 125mm for Ø up to 250mm Speed 36-2,100 rpm Spindle mount MK4 Spindle clearance 26mm 380V 50Hz
          5.4A Longitudinal feeds 0.03-2.18mm/rev Cross feeds 0.015-1.09mm/rev for thread pitches: metric 0.2-7.5mm Modulus 0.25-2.5 inch 4-60G/1" With 4-jaw chuck Ø 150mm. Other accessories according to pictures. Come to Giebelstadt near Würzburg to view the machine. The machine is packed on a wooden pallet and loaded onto a truck by us.
            turning diameter 250 mm
            turning length 750 mm
            swing diameter over bed slide 250 mm
            total power requirement 2,3 kW
            weight of the machine ca. 0,7 t
            dimensions of the machine ca. 3,1x1,4x1,6 m
            Description :
            We offer a conventional lathe of the type KART E3N-750-R. This machine built in 1969 was used for cutting wedge and
            timing belt. There is also a boom with an adjustable distance to the axle center and a holder for a roller on which the wide
            belt hose was guided. Then the parting width with the
            Linear scale from Heidenhein VRZ400 B with linear encoder LS 603 C was adjusted and the belt cut off.

            Center distance 750mm
            Center height 125mm
            for Ø up to 250mm
            Speed 36-2,100 rpm
            Spindle mount MK4
            Spindle clearance 26mm
            380V 50Hz
            5.4A
            Longitudinal feeds 0.03-2.18mm/rev
            Cross feeds 0.015-1.09mm/rev
            for thread pitches:
            metric 0.2-7.5mm
            Modulus 0.25-2.5
            inch 4-60G/1"

            With 4-jaw chuck Ø 150mm. Other accessories according to pictures.

            Come to Giebelstadt near Würzburg to view the machine.

            The machine is packed on a wooden pallet and loaded onto a truck by us.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 2.500 €
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used Machines available immediately Machining Center - Vertical EMAG HVC230E-X-10.5-0.6/3-1FD-HSK-A


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00360 · Machining Center - Vertical

          EMAG - HVC230E-X-10.5-0.6/3-1FD-HSK-A - - - konventionell

          Technical details
          turning speed range 3000 U/min︱voltage 188-400 V︱current intensivity 56-41 A︱total power requirement 105-22 kW︱weight of the machine ca. 196 kg︱
          STEP TEC / EMAG High-performance spindle for EMAG Type HVC230E-X-10.5-0.6/3-1FD-HSK-A63 Ident.No. 6033.004.A.10 c Serial No: 6033.0047 3000rpm 105-22kW 56-41A 188-400V 45/100/200Hz Motor spindle with HSK-A63 uptake unused or revised by the manufacturer Weight 196kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            turning speed range 3000 U/min
            voltage 188-400 V
            current intensivity 56-41 A
            total power requirement 105-22 kW
            weight of the machine ca. 196 kg
            Description :
            STEP TEC / EMAG
            High-performance spindle
            for EMAG
            Type HVC230E-X-10.5-0.6/3-1FD-HSK-A63
            Ident.No. 6033.004.A.10 c
            Serial No: 6033.0047
            3000rpm
            105-22kW
            56-41A
            188-400V
            45/100/200Hz
            Motor spindle
            with HSK-A63 uptake
            unused or revised by the manufacturer
            Weight 196kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 7.100 €
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Machines available immediately Pillar Drilling Machine AUDAX 50 A


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11686 · Pillar Drilling Machine

          AUDAX - 50 A - - 1970 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 300 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱spindle turning speed range 55 - 600 U/min︱table diameter 500 mm︱column diameter 180 mm︱feeds 0,07/0,11/0,16/0,22 mm/U︱total power requirement 1,47 / 1,84 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,3 x 0,65 x 2,17 m︱Electric 380 Volt ︱Condition: ready for operation
          Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 50 mm
            throat 300 mm
            bore stroke 200 mm
            spindle taper MK 4
            spindle turning speed range 55 - 600 U/min
            table diameter 500 mm
            column diameter 180 mm
            feeds 0,07/0,11/0,16/0,22 mm/U
            total power requirement 1,47 / 1,84 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1,3 x 0,65 x 2,17 m
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 1.950 €
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used Machines available immediately Radial Drilling Machine BOHRPOWER BOHRPOWER BPC 32/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1214 · Radial Drilling Machine

          BOHRPOWER - BOHRPOWER BPC 32/1000 - - 2017 -

          Technical details
          gebraucht20173901China8490 €︱ 6800 €︱ 132 mm︱ MK 4300 - 1.000 mm︱ 32 - 2.500 (16) U/min︱ 1760 mm︱ 800 mm︱ 2080 mm︱ 1600 kg︱ 530 - 1.000 mm︱ 2.2 kW︱ 240 mm︱ 250 mm︱ 0,75 kW︱
          box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH
            gebraucht
            2017
            3901
            China
            8490 €
            6800 €
            1
            32 mm
            MK 4
            300 - 1.000 mm
            32 - 2.500 (16) U/min
            1760 mm
            800 mm
            2080 mm
            1600 kg
            530 - 1.000 mm
            2.2 kW
            240 mm
            250 mm
            0,75 kW
            Description :
            box table 600 x 455 x 455 mm
            coolant equipment
            machine lamp
            mechanical clamping for height adjustment and spindle stock
            electr. clamping for arm rotation
            machine and equipment according to the CE-regulations
            operating manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • 6.800 €
          Datasheet
          Request / Contact

          Double Spindle Milling Machine

          used Machines available immediately Double Spindle Milling Machine HK CON L2 SDZ 8


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-K001 · Double Spindle Milling Machine

          HK CON - L2 SDZ 8 - - 2014 - Siemens

          Technical details
          control Siemens ︱total power requirement 110 kW︱weight of the machine ca. 14 t︱x-travel 1800 mm︱y-travel mm︱z-travel 190 mm︱diameter - cutter standard max. 29,51 mm︱length max. 600 mm︱turning length 125 mm︱spindle taper HS 32 ︱spindle turning speed - stepless max. 7000 U/min︱dimensions of the machine ca. 9,0 x 7,0 x 3,5 m︱z-travel mm︱
            control Siemens
            total power requirement 110 kW
            weight of the machine ca. 14 t
            x-travel 1800 mm
            z-travel 190 mm
            diameter - cutter standard max. 29,51 mm
            length max. 600 mm
            turning length 125 mm
            spindle taper HS 32
            spindle turning speed - stepless max. 7000 U/min
            dimensions of the machine ca. 9,0 x 7,0 x 3,5 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • 65.000 €
          Datasheet
          Request / Contact

          Universal Milling Machine

          used Machines available immediately Universal Milling Machine INTOS FNGP 40


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23070 · Universal Milling Machine

          INTOS - FNGP 40 - - - HEIDENHAIN

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 400 mm︱Control HEIDENHAIN ︱spindle turning speed - stepless 63 - 3150 U/min︱quill stroke 100 mm︱tool taper SK 40 ︱table surface area 630 x 400 mm︱total power requirement 8,5 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 2,5 x 1,8 x 2,0 m︱
          Electric handwheel
            x-travel 600 mm
            y-travel 400 mm
            z-travel 400 mm
            Control HEIDENHAIN
            spindle turning speed - stepless 63 - 3150 U/min
            quill stroke 100 mm
            tool taper SK 40
            table surface area 630 x 400 mm
            total power requirement 8,5 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 2,5 x 1,8 x 2,0 m
            Description :
            Electric handwheel


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • 4.700 €
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used Machines available immediately Bevel Gear Generator - Spiral WMW-MODUL MK 12


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00446 · Bevel Gear Generator - Spiral

          WMW-MODUL - MK 12 - - - konventionell

          Technical details
          weight 29,4 kg︱
          WMW MODULE Arcoid cutter head MK 12" 2§m - 304.8 for bevel gears with tapered tooth height analog Gleason for bevel gear milling machine MODUL ZFTKK 500 28 knife inserts 05M VESTA WORKS 552 A-311 AJ/ck 30499005 used weight 29.4kg We have 4 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 29,4 kg
            Description :
            WMW MODULE
            Arcoid cutter head
            MK 12"
            2§m - 304.8
            for bevel gears with tapered tooth height
            analog Gleason
            for bevel gear milling machine MODUL ZFTKK 500
            28 knife inserts 05M
            VESTA WORKS 552 A-311
            AJ/ck
            30499005
            used
            weight 29.4kg

            We have 4 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact

          Bevel Gear Generator - Straight

          used Machines available immediately Bevel Gear Generator - Straight KLINGELNBERG


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00397 · Bevel Gear Generator - Straight

          KLINGELNBERG - - - - konventionell

          Technical details

          KLINGELNBERG Palloid gear hobs We have around 450 milling cutters in stock in the module range from 1-7. Manufacturer KLINGELNBERG Please contact us! You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Description :
            KLINGELNBERG
            Palloid gear hobs
            We have around 450 milling cutters in stock in the module range from 1-7.

            Manufacturer KLINGELNBERG

            Please contact us!

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 3.100 €
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used Machines available immediately Gear Hobbing Machine - Horizontal MIKRON M122.01


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00321 · Gear Hobbing Machine - Horizontal

          MIKRON - M122.01 - - 1980 -

          Technical details
          max. wheel diameter 40 mm︱gear width 35 mm︱max. module 1 ︱min. module 0 ︱voltage 380V 50Hz ︱total power requirement 0,61 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 70x67x134 cm︱
          We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in very good condition. This machine can hob spur and helical gears as well as worms up to module 1,00. The max. diameter is 40mm and width up to 35mm. With the machine is cooling pump with bassin and a set of changing wheels according to list and fixed in machine. Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT AIRORT.
            max. wheel diameter 40 mm
            gear width 35 mm
            max. module 1
            voltage 380V 50Hz
            total power requirement 0,61 kW
            weight of the machine ca. 320 kg
            dimensions of the machine ca. 70x67x134 cm
            Description :
            We quote a horizontal and universal gear hobber of SWISS type MIKRON M122.01 in
            very good condition. This machine can hob spur and helical gears as well as
            worms up to module 1,00. The max. diameter is 40mm and width up to 35mm.

            With the machine is cooling pump with bassin and a set of changing wheels
            according to list and fixed in machine.

            Come for inspection to our storage in Giebelstadt, about 80min. from FRANKFURT
            AIRORT.



        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.500 €
          Datasheet
          Request / Contact

          Gear Noise under Load Testing Machine

          used Machines available immediately Gear Noise under Load Testing Machine HURTH ZP 300


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00268 · Gear Noise under Load Testing Machine

          HURTH - ZP 300 - - 2000 -

          Technical details
          max. wheel diameter 300 mm︱centre distance 500 mm︱max. module 6 mm︱min. module 0,1 mm︱total power requirement 35 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,5 x 1,0 x 1,7 m︱
          The gear noise tester HURTH ZP 300 is used for noise tests of external gears with chance of error detection. Our machine is disassembled in our stock. The machine is in good working condition and can be overtaken now. Come and inspect the tester in Giebelstadt, nearby 80 min to Frankfurt airport. Description: This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and modernized by company FORTUNA (grinding machine specialist) with: - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S (17kW, 4000rpmn, 36Nm) - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm - 2 new couplings between servo and spindle of type KTR - HEIDENHAIN linear encoder for measuring of axial shift - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift - 4 new BRUCKNER centers With this machine there is no controlling unit. So the machine is predestinated for customer, who wants to install new controller! Of this type we have 2 similar machines in stock.
            max. wheel diameter 300 mm
            centre distance 500 mm
            max. module 6 mm
            min. module 0,1 mm
            total power requirement 35 kW
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,5 x 1,0 x 1,7 m
            Description :
            The gear noise tester HURTH ZP 300 is used for noise tests of external gears
            with chance of error detection. Our machine is disassembled in our stock. The
            machine is in good working condition and can be overtaken now. Come and inspect
            the tester in Giebelstadt, nearby 80 min to Frankfurt airport.

            Description:
            This tester HURTH ZP 300 was in ´2000 complete mechanical overhauled and
            modernized by company FORTUNA (grinding machine specialist) with:
            - 2 new servo motors directly adapted to spindles, type BAUMÜLLER DS 100-S
            (17kW,
            4000rpmn, 36Nm)
            - 2 new spindles of typeFORTUNA FIVY 90RL 190 HSK-40.301 for max. 6000rpm
            - 2 new couplings between servo and spindle of type KTR
            - HEIDENHAIN linear encoder for measuring of axial shift
            - HEIDENHAIN linear encoder LS 476 ML120mm for measuring of radial shift
            - 4 new BRUCKNER centers

            With this machine there is no controlling unit. So the machine is predestinated
            for customer, who wants to install new controller!

            Of this type we have 2 similar machines in stock.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 6.200 €
          Datasheet
          Request / Contact

          Gear Testing Machine

          used Machines available immediately Gear Testing Machine HÖFLER H1301/1400


          • ADEM MASCHINEN GMBH
          • Karl-Benz-Straße 1
          • 40764 Langenfeld (Rheinland)
          • Deutschland

          • +49 (0) 2173- 287 77 07
            +49 (0) 2173- 287 77 05
          • adem-maschinen@t-online.de
            www.adem-maschinen.com
          #2000-324 · Gear Testing Machine

          HÖFLER - H1301/1400 - - 1992 -

          Technical details
          max. wheel diameter 1400 mm︱gear width 400 mm︱max. module 25 ︱min. module 1 ︱total power requirement - kW︱weight of the machine ca. 7,0 t︱dimensions of the machine ca. 3,0 x 1,2 x 3,2 m︱
            max. wheel diameter 1400 mm
            gear width 400 mm
            max. module 25
            min. module 1
            total power requirement - kW
            weight of the machine ca. 7,0 t
            dimensions of the machine ca. 3,0 x 1,2 x 3,2 m


        • ADEM MASCHINEN GMBH
        • Karl-Benz-Straße 1
        • 40764 Langenfeld (Rheinland)
        • Deutschland

        • 14.500 €
          Datasheet
          Request / Contact

          Double spindle mounted in journals

          used Machines available immediately Double spindle mounted in journals SCHLEIFPOWER SCHLEIFPOWER KPM 50


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1316 · Double spindle mounted in journals

          SCHLEIFPOWER - SCHLEIFPOWER KPM 50 - - 2015 -

          Technical details
          gebraucht20155454prompt, Zwischenverkauf vChina2200 €︱ 1580 €︱ 12.000 x 50 mm︱ 250 x 50 mm︱ 400 - 2800 1/min︱ 35 mm︱ 2.2 kW︱ 1160 mm︱ 700 mm︱ 1850 mm︱ 150 kg︱
          belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH
            gebraucht
            2015
            5454
            prompt, Zwischenverkauf v
            China
            2200 €
            1580 €
            1
            2.000 x 50 mm
            250 x 50 mm
            400 - 2800 1/min
            35 mm
            2.2 kW
            1160 mm
            700 mm
            1850 mm
            150 kg
            Description :
            belt grinding- and polishing machine in one device

            continuous variable revs by frequency converter
            2 clamping mandrels
            quick action clamping chuck
            incl. underframe
            users manual in ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • 1.580 €
          Datasheet
          Request / Contact
          used Machines available immediately Double spindle mounted in journals GREIF DV 3 -1-1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12241 · Double spindle mounted in journals

          GREIF - DV 3 -1-1 - - -

          Technical details
          wheel diameter 300 mm︱speeds 1500 U/min︱Drive 1,5 kW︱grinding wheel size 300 x 40 x 30 mm︱weight of the machine ca. 250 kg︱range L-W-H 0,7 x 0,5 x 1,1 m︱Electric 380 Volt ︱Base ︱Suck away unit T-P ADT 12
          Robust bench grinder diameter 300 mm with hand rest and integrated vacumer. Machine dealer with own stock of 1600 m².
            wheel diameter 300 mm
            speeds 1500 U/min
            Drive 1,5 kW
            grinding wheel size 300 x 40 x 30 mm
            weight of the machine ca. 250 kg
            range L-W-H 0,7 x 0,5 x 1,1 m
            Suck away unit T-P ADT 12
            Description :
            Robust bench grinder diameter 300 mm with hand rest and integrated
            vacumer.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 830 €
          Datasheet
          Request / Contact

          Surface Grinding Machine

          used Machines available immediately Surface Grinding Machine SCHLEIFPOWER SCHLEIFPOWER FSM 2550 AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1286 · Surface Grinding Machine

          SCHLEIFPOWER - SCHLEIFPOWER FSM 2550 AHD - - 2015 -

          Technical details
          gebraucht20155413prompt, Zwischenverkauf vChina14400 €︱ 11520 €︱ 1450 mm︱ 600 x 254 mm︱ 600 mm︱ 508 x 254 mm︱ 180 kg︱ 2850 1/min︱ 2.2 kW︱ 2200 mm︱ 1800 mm︱ 1850 mm︱ 1800 kg︱ 200 x 20 x 312 mm︱
          2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH
            gebraucht
            2015
            5413
            prompt, Zwischenverkauf v
            China
            14400 €
            11520 €
            1
            450 mm
            600 x 254 mm
            600 mm
            508 x 254 mm
            180 kg
            2850 1/min
            2.2 kW
            2200 mm
            1800 mm
            1850 mm
            1800 kg
            200 x 20 x 312 mm
            Description :
            2-axes digital read-out
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed
            automatic vertical feed
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • 11.520 €
          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used Machines available immediately Surface Grinding Machine - Horizontal HAHN & KOLB Orion 635 NCK


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E23033 · Surface Grinding Machine - Horizontal

          HAHN & KOLB - Orion 635 NCK - - 1983 -

          Technical details
          grinding length 650 mm︱grinding width 375 mm︱workpiece height 375 mm︱magnetic clamping plate, electical 600 x 300 mm︱table surface area 900 x 300 mm︱dimensions of grinding wheel 300 x 76,2 x 50 mm︱total power requirement 4,8 kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 2,8 x 1,9 x 2,4 m︱
            grinding length 650 mm
            grinding width 375 mm
            workpiece height 375 mm
            magnetic clamping plate, electic. 600 x 300 mm
            table surface area 900 x 300 mm
            dimensions of grinding wheel 300 x 76,2 x 50 mm
            total power requirement 4,8 kW
            weight of the machine ca. 2,9 t
            dimensions of the machine ca. 2,8 x 1,9 x 2,4 m
            Description :



        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • 3.400 €
          Datasheet
          Request / Contact

          Drill Grinding Machine

          used Machines available immediately Drill Grinding Machine AVYAC C 222


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12191 · Drill Grinding Machine

          AVYAC - C 222 - - 1985 -

          Technical details
          drill diameter 2 - 26 mm︱turning speeds 2800 U/min︱total power requirement 0,75 kW︱weight of the machine ca. 190 kg︱range L-W-H ca. 1200 x 800 x 1400 mm︱Electric 380 Volt ︱Cooling equipment ︱Grinding wheel ︱Chuck 6 -Backen
          Machine dealer with own stock of 1600 m².
            drill diameter 2 - 26 mm
            turning speeds 2800 U/min
            total power requirement 0,75 kW
            weight of the machine ca. 190 kg
            range L-W-H ca. 1200 x 800 x 1400 mm
            Chuck 6 -Backen
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 1.250 €
          Datasheet
          Request / Contact

          Milling Graver Grinding Machine

          used Machines available immediately Milling Graver Grinding Machine Kaempf STM 2 aehnlich Deckel S1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11621 · Milling Graver Grinding Machine

          Kaempf - STM 2 aehnlich Deckel S1 - - -

          Technical details
          dia. of draw-in collets 4 - 24 mm︱max. radius to grind 12 mm︱grinding range 4 - 24 mm︱grinding wheel-diameter 100 mm︱total power requirement 0,4 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1 x 0,6 x 0,4 m︱Electric 380 Volt ︱Base with drawer ︱Diverse collets ︱Draw-off device
          Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².
            dia. of draw-in collets 4 - 24 mm
            max. radius to grind 12 mm
            grinding range 4 - 24 mm
            grinding wheel-diameter 100 mm
            total power requirement 0,4 kW
            weight of the machine ca. 100 kg
            dimensions of the machine ca. 1 x 0,6 x 0,4 m
            Description :
            Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm,
            puller for grinding wheel.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 850 €
          Datasheet
          Request / Contact

          Band Saw - Automatic

          used Machines available immediately Band Saw - Automatic FORTE Fortemat BA 251


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2169 · Band Saw - Automatic

          FORTE - Fortemat BA 251 - - -

          Technical details
          cutting diameter 250 mm︱saw band length 3660x25x0,85 mm︱cutting width 250 mm︱cutting speed 20 - 70 m/min︱cutting lenght max. 400 / 800 mm︱cutting pressure 2 - 35 kg︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 2,0 x 1,4 x 1,6 m︱
            cutting diameter 250 mm
            saw band length 3660x25x0,85 mm
            cutting width 250 mm
            cutting speed 20 - 70 m/min
            cutting lenght max. 400 / 800 mm
            cutting pressure 2 - 35 kg
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            dimensions of the machine ca. 2,0 x 1,4 x 1,6 m


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • 1.450 €
          Datasheet
          Request / Contact

          Thread Boring Machine - Vertical

          used Machines available immediately Thread Boring Machine - Vertical Hueller Ultromat UG 8 / Reihe 4


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09124 · Thread Boring Machine - Vertical

          Hueller - Ultromat UG 8 / Reihe 4 - - -

          Technical details
          thread capacity 8 mm︱throat 200 mm︱thread pitch mm︱thread dia. 8 mm︱threading length 50 mm︱motor speed 1400-2000-2800 U/min︱min. dia. M 2 ︱total power requirement 0,45 kW︱weight of the machine ca. 50 t︱dimensions of the machine ca. m︱range L-W-H 400 x 230 x 960 mm︱
          We sell this machine with a small SPECIAL price but NOT TESTED. Machine dealer with own stock of 1600 m².
            thread capacity 8 mm
            throat 200 mm
            thread dia. 8 mm
            threading length 50 mm
            motor speed 1400-2000-2800 U/min
            min. dia. M 2
            total power requirement 0,45 kW
            weight of the machine ca. 50 t
            range L-W-H 400 x 230 x 960 mm
            Description :
            We sell this machine with a small SPECIAL price but NOT TESTED.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 420 €
          Datasheet
          Request / Contact

          Hand-Operated Fly Press

          used Machines available immediately Hand-Operated Fly Press Fabr. UNBEKANNT BP 6


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11213 · Hand-Operated Fly Press

          Fabr. UNBEKANNT - BP 6 - - unbekannt -

          Technical details
          pressure 6 t︱dayligth 180 mm︱spindle diameter 32 mm︱throat 115 mm︱ram stroke 90 mm︱table surface area 300x270 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 800 x 1350 mm︱
          Machine dealer with own stock of 1600 m².
            pressure 6 t
            dayligth 180 mm
            spindle diameter 32 mm
            throat 115 mm
            ram stroke 90 mm
            table surface area 300x270 mm
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 800 x 1350 mm
            Description :
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • 370 €
          Datasheet
          Request / Contact

          Punching and Die Stamping Press

          used Machines available immediately Punching and Die Stamping Press TÜNKERS PFS 900-150 75° T12-3


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00358 · Punching and Die Stamping Press

          TÜNKERS - PFS 900-150 75° T12-3 - - 2020 - konventionell

          Technical details
          press capacity 100 kN︱Angle 75 °︱weight of the machine ca. 55 kg︱required space 671x100x165 mm︱
          TÜNKERS embosser PFS 900-150 75° T12-3 Year of construction 3/2020 Pneumatic toggle unit unused Weight 55kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            press capacity 100 kN
            Angle 75 °
            weight of the machine ca. 55 kg
            required space 671x100x165 mm
            Description :
            TÜNKERS
            embosser
            PFS 900-150
            75°
            T12-3
            Year of construction 3/2020
            Pneumatic toggle unit
            unused
            Weight 55kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.400 €
          Datasheet
          Request / Contact
          used Machines available immediately Punching and Die Stamping Press BOSCH PS 20


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00387 · Punching and Die Stamping Press

          BOSCH - PS 20 - - 2003 - konventionell

          Technical details
          nominal pressure 20 kN︱Year of construction 2003 -︱weight of the machine ca. 15,3 kg︱
          BOSCH 20kN press spindle PS20 Order no. 060860004 Nominal force 20kN with 4 connection cables 1x 3607030223290 1x 3604491057287 1x 3608870348291 1x 3604491035290y< with junction box 3607021015 with transducer 3608870347 with acceptance inspection sheet with instructions without drive motor! Weight 15.3kg used Year of construction 2003 mint condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            nominal pressure 20 kN
            Year of construction 2003 -
            weight of the machine ca. 15,3 kg
            Description :
            BOSCH
            20kN press spindle
            PS20
            Order no. 060860004
            Nominal force 20kN
            with 4 connection cables
            1x 3607030223290
            1x 3604491057287
            1x 3608870348291
            1x 3604491035290y<
            with junction box 3607021015
            with transducer 3608870347
            with acceptance inspection sheet
            with instructions
            without drive motor!
            Weight 15.3kg
            used
            Year of construction 2003
            mint condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 3.700 €
          Datasheet
          Request / Contact
          used Machines available immediately Punching and Die Stamping Press TOX PRESSOTECHNIK  412799 TZ 05.363171.A.004


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00395 · Punching and Die Stamping Press

          TOX PRESSOTECHNIK - 412799 TZ 05.363171.A.004 - - - konventionell

          Technical details
          weight of the machine ca. 150 kg︱
          TOX PRESSOTECHNIK Clinching tongs 55kN complete 412799 TZ 05.363171.A.004 with clinching tongs 363171 with power module 289774 with EPMR: 055.034.100.00 289774.181 with test report unused top condition Weight 150kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight of the machine ca. 150 kg
            Description :
            TOX PRESSOTECHNIK
            Clinching tongs 55kN complete 412799
            TZ 05.363171.A.004
            with clinching tongs 363171
            with power module 289774
            with EPMR: 055.034.100.00
            289774.181
            with test report
            unused
            top condition
            Weight 150kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 3.300 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          TOP Manufacturer: