MEB Maschinenhandel GmbH - Stockist for used machines

screw ø: 120 mm︱screw length: 12D ︱screw speedl: 1,75 - 35 U/min︱drive power: 72,5 kW︱

---

Condition: used, will be overhauled on order incl. warranty, incl. CE-marking Specification: Extruder - second-hand with feed roller - screw diameter: 120 mm - screw length: L = 12D - screw speed: 1,75 - 35 rpm - nominal motor power: 72,5 kW - Nominal gearbox torque: 18,000 Nm - Belt drive, number of belts: 5 - Number of heating-cooling zones: 4 - Heating capacity per zone: 6 kW - Voltage: 3x 400V, 50Hz, N

screw ø: 150 mm︱screw length: 16D ︱screw speedl: 2,5 - 40 U/min︱drive power: kW︱

---

screw ø: 90 mm︱screw length: 20D ︱screw speedl: 0 - 60 U/min︱

---

Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capacity per zone: 9 kW - Feed roller temperable version - AC drive motor approx.: 54kW, n/max = 1,150 rpm Unit with 12 months warranty and CE marking

Press force max.: 3000 kN︱heating plates: 600 x 630 mm︱electrically heated: °C︱heating power: kW︱piston stroke: 420 mm︱no. of stages: 1 ︱

---

Condition: Used, overhauled Specification: Press 600 x 630 mm, used - closing force: 300 t - closing: from bottom to top - heating plates: 2 electric plates - dimensions of heating platens: 600 x 630 mm - distance between heating platens: 420 mm - AC machine power oil pump: 5,5 kW - New control cabinet with Siemens 7" touch panel - PLC-control make Siemens S7-1200 - Frequency converter make Schneider - hinged protection in the front area, - dimensions approx.: 1,800 x 1,500 mm - System height approx.: 3,000 mm - Working height without foundation hole approx.: 1,650 mm - Weight approx.: 3,500 kg - Machine power incl. - electrical equipment approx.: 19 kW Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year

Press force max.: -- kN︱heating plates: 600x600,500x500 mm︱electrically heated: -- °C︱piston stroke: -- mm︱no. of stages: 1-3 ︱

---

Condition: Used, Specification: 5x vulcanising press, second-hand consisting of: 2x make Simpelkamp, 2x make Reinartz, two-daylight presses 1x make Reinartz 1x crane system 1x pedestals Simpelkamp presses: - Clamping force: 250 t - number of floors: 1 - Closing: from bottom to top - Heating plates: 2 electric plates - Dimensions of heating platens: 600 x 600 mm - Distance between heating platens: 530 mm - Hydraulics: 200 bar - AC machine power oil pump: 7,5 kW - Dimensions approx.: 1,300 x 1,000 mm - Unit height approx.: 2,800 - 3,000 mm Two similar plants are available Reinartz presses: - Clamping force: 140 t - Number of floors: 3 - Closing: from bottom to top - Heating platens: 3 electric platens - Dimensions of heating platens: 500 x 500 mm - Distance between heating platens: 600 mm - Hydraulics: 200 bar - AC machine power oil pump: 4 kW - Dimensions approx.: 1,300 x 1,000 mm - Unit height approx.: 2,800 - 3,000 mm Two similar plants are available Reinartz presses: - Clamping force: 250 t - Number of floors: 1 - Closing: from bottom to top - Heating platens: 2 electric platens - Dimensions of heating platens: 500 x 500 mm - Distance between heating platens: 600 mm - AC machine power oil pump: 7.5 kW - Dimensions approx.: 1,300 x 1,000 mm - System height approx.: 2,800 - 3,000 mm

Press force max.: 1.000 kN︱heating plates: 500 x 500 mm︱electrically heated: °C︱heating power: kW︱piston stroke: ca. 500 mm︱no. of stages: ︱

---

Press force max.: 4.000 kN︱heating plates: 800 x 800 mm︱electrically heated: °C︱heating power: 7,5 kW︱piston stroke: bis ca. 450 mm︱

---

Condition: used, overhauled Specification: Vulcanising press 800x800 mm, Panel structure, used - Closing force approx.: 400 t - Closure: from bottom to top - heating plates: 2 new electric plates with 2x new heating elements - Dimensions heating plates approx.: 800 x 800 mm - distance between the shoulders approx.: 920 mm - Clearance between the heating plates approx.: 380-400 mm (must be determined during the overhaul), depending on the depending on the tool holder (slots or bore) up to approx. 450 mm - new electric valves - AC machine power pump motor: 7.5 kW - New control cabinet with Siemens 7" touch panel - PLC system Siemens S7-1200 - Frequency converter system, make Schneider - New cabling - Light curtains at the front - CE marking - Operating and maintenance manual in German language - Painting according to customer specifications. Reconditioned according to CE standard safety regulations. Warranty: 1 year Two identical systems are available.

Press force max.: 1.000 kN︱heating plates: 480 x 520 mm︱electrically heated: °C︱piston stroke: ca. 500 mm︱no. of stages: 1 ︱

---

Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7" touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year

cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱

---

cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱

---

condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language

cross-section width: 700 mm︱cross-section heigth: 500 mm︱feed: -- mm︱

---

Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking; Option: - Output roller conveyor new

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱

---

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱

---

cross-section width: 40 (45) mm︱cross-section heigth: 25 mm︱feed: 1 - 999.999,9 mm︱speed of feed: 1 - 60 m/min︱cuts max.: 100 Schnitte/m︱

---

Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 1750 mm - Operating instructions available!

cross-section width: 5 Schläuche 3-5 mm︱cross-section heigth: 3 - 20 mm︱feed: 1,5 - 50 mm︱

---

Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: 5 bar - Operating voltage: 3x 400V, 50Hz, N, PE - Paint finish: RAL 6011 reseda green - Weight approx.: 160 kg

cross-section width: Schläuche max. 11 mm︱cross-section heigth: 11 mm︱feed: 0,5 - 100.000 mm︱

---

Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No documentation, but electrical diagrams are available!

speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 120 mm︱cross-section heigth: 15 mm︱

---

Condition: used, factory NEW, only approx. 20 hours in operation Specification: Cutting Master 15/130 electro-pneumatic cutting machine - basic machine with cutting unit - cutting unit: punch cut - material W/H: approx. 120 x 15 mm - transport by two drive belts - with a maximum speed of 40 m/min - Contact pressure of the drive belts pneumatically adjustable - Length measurement electronically from 1 - 99,999.9 mm Digital display - Cut pneumatically with adjustable pressure up to 6 bar - Number of pieces selectable from 1 to 99.999 Display digital - Different modes for printer connection and expanding stations, control via external inputs/outputs or RS 232 Connections for material feed and depositing devices - Machine switch-off when the number of pieces is reached or end of cut material - Sensors and pneumatics plugged in - Supply connections: - mains connection 230 V/50 Hz - compressed air 6 bar - Plexiglas cover in the material outlet - Feeding bead 130 mm wide - Contact length approx. 115 mms Including the following options: - Material feed direction: right to left - Adjustable stop, adjustable via spindle with position indicator as limit for the upper belt - Take-off belt, belt length approx. 300 mm, separate drive, 24V DC, 0-45 m/min - Mounting frame made of AL-Ptofiles for mounting the cutting machine machine, take-off belt and protective cover. Other options at extra charge: - Sag control with start/stop operation - Material feed (caterpilla) EP 15/40 R/L

cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱

---

cross-section width: 100 mm︱cross-section heigth: 40 mm︱feed: 2 - 999.999,9 mm︱

---

Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to *800 N - Drive: *2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg

machine measurements 3.230 x 1.200 x 1.780 mm︱machine weight - kg︱power capacity ca. 4,4 kW︱

---

Condition: used, Specification: Stollen trigger for triggering Tubes, hoses and profiles Chain haul-off with profile studs and haul-off chain. - Contact length approx.: 2,000 mm - Width of the cleats approx.: 150 mm - motor adjustable: 2.300 -230 rpm - Engine (Piller) Power approx.: 6 PS - Gearbox: CAVEX Flender Input 2,200 rpm, output 11 rpm - Drive to gear via V-belt - Drive gear to caterpillar: via double chain and spur gears - Lifting of the caterpillar belts via pneumatic cylinders - Compressed air: 6-7 bar - Machine dimensions L/W/H approx.: 3,230 x 1,200 x 1,780 mm

machine measurements 2500 x 2000 x 3800 mm︱machine weight 1500 kg︱power capacity 10 kW︱

---

machine measurements 2.430 x 1.110 x 2.360 mm︱machine weight -- kg︱power capacity 2,2 kW︱

---

Condition: used Specification: 3-chamber baler, type: 8020 E.F.G. The baler is suitable for simultaneous pressing of paper, cardboard, foils & cans at the same time. The machine works automatically after starting. The plunger is moved manually over the chambers. The third chamber is currently in storage, but can be added without be added without any effort. - Press force: 20 t - Cycle time: 25 - 30 sec - Engine power: 2.2 kW - Total length with 2 chambers: 2,430 mm - Total length with 3 chambers: 3,650 mm - Total width: 1,110 mm - Total height: 2,360 mm - Voltage: 400 V, 50 Hz Bale dimensions L/W/H approx.: 1,100 x 800 x 800 mm Bale weight approx.: 200 - 220 kg The bales are tied with tied with 4 straps. Documentation in German, consisting of: - detailed spare parts list - maintenance instructions - circuit diagram: Electrical and hydraulic diagram Stage with ladder and handrail