,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Zuefle GmbH - Stockist for used machines

          Machinelist:


          Measuring system

          used  Measuring system AVL 4390 G004


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00314 · Measuring system

          AVL - 4390 G004 - - 2001 -

          Technical details
          voltage 230V 50/60Hz V︱total power requirement 1 kW︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 50x50x50 cm︱
          We dan deliver a opacimeter of brand AVL and type AVL 4390 G004 in very good condition. The tester is equipped with probe tube and wire and manual. With the tester can be measured in gases or fluids particles, especially for Diesel. With the tester is no controller and no software! We have 2 units in our storage. Come for inspection to Giebelstadt, about 80min. from Frankfurt airport.
            voltage 230V 50/60Hz V
            total power requirement 1 kW
            weight of the machine ca. 70 kg
            dimensions of the machine ca. 50x50x50 cm
            Description :
            We dan deliver a opacimeter of brand AVL and type AVL 4390 G004 in very good
            condition. The tester is equipped with probe tube and wire and manual.

            With the tester can be measured in gases or fluids particles, especially for
            Diesel.

            With the tester is no controller and no software!

            We have 2 units in our storage. Come for inspection to Giebelstadt, about
            80min. from Frankfurt airport.
          Datasheet
          Request / Contact

          Profile projector

          used  Profile projector HAUSER 215 K


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00278 · Profile projector

          HAUSER - 215 K - - 1980 -

          Technical details
          amplification -fold 20 x ︱workpiece height max. 200 mm︱glass plate - dimensions 60 x 50 cm︱radial slide travel 50 mm︱maximum axial offset 25 mm︱Vertikal stroke 80 mm︱total power requirement 1 kW︱weight of the machine ca. 200 kg︱dimensions of the machine ca. 60 x 100 x 220 cm︱
          We quote a optical profile projector of type HAUSER 215K, machine no. 1635-164 with 2-axe digital display. The tester is in good shape. This projector is equipped with cross table for radial travel of 25mm and axial travel of +/- 25mm. The height adjustment is 80mm. There are 2 linear encoder from MSA type RSI. Both are connected to digital display of type R.S.F. type Z-502. The projector is complete running and can be inspected under power in our storage. Come for inspection to Giebelstadt, about 80min from Frankfurt airport. Attachment: The tester has an enlargement lense of factor 20x and 10x integrated. The unit has a hood with curtain. Actually we have some different projectors in warehouse. So come and you can select the suitable unit for your need.
            amplification -fold 20 x
            workpiece height max. 200 mm
            glass plate - dimensions 60 x 50 cm
            radial slide travel 50 mm
            maximum axial offset 25 mm
            Vertikal stroke 80 mm
            total power requirement 1 kW
            weight of the machine ca. 200 kg
            dimensions of the machine ca. 60 x 100 x 220 cm
            Description :
            We quote a optical profile projector of type HAUSER 215K, machine no. 1635-164
            with 2-axe digital display. The tester is in good shape. This projector is
            equipped with cross table for radial travel of 25mm and axial travel of +/-
            25mm. The height adjustment is 80mm. There are 2 linear encoder from MSA type
            RSI. Both are connected to digital display of type R.S.F. type Z-502. The
            projector is complete running and can be inspected under power in our
            storage. Come for inspection to Giebelstadt, about 80min from Frankfurt airport.


            Attachment:
            The tester has an enlargement lense of factor 20x and 10x integrated.
            The unit has a hood with curtain.

            Actually we have some different projectors in warehouse. So come and you can
            select the suitable unit for your need.
          Datasheet
          Request / Contact

          Balancing Machine

          used  Balancing Machine TIRA K 3B


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00330 · Balancing Machine

          TIRA - K 3B - - 2005 -

          Technical details
          workpiece weight max. 3 kg ︱workpiece length 40 - 500 mm︱diameter 80 mm︱turning speeds max. 3000 U/min︱connected load frequency 230V 50Hz ︱total power requirement 0,5 kW︱weight of the machine ca. 220 kg︱dimensions of the machine ca. 1 x 1,5 x 2 m︱
          We offer a small, modern balancing machine for motor anchors of the type TIRA K 3B. This machine, built in 2005, is now in November 2022 complete overhauled from specialists and can be inspected under power. The machine is calibrated and with DIN ISO Master Rotor tested and we have acceptance protocol accorting DIN VDE 0113. It can be balanced with the system in 2 levels. The balancing software is TIRA X9000 WIN. There is an operating manual for this. The balancing machine offered with machine number R08/05 821165 has one Aluminum table with a length of 260mm and clamping fixtures for shorter shafts. The rotation is running with 2 drive belts. The height of the clamping center is 90mm above the table. The maximum rotor diameter is 80mm. The bearing point diameter is between 20-50mm. The entire table has a support length of 600mm. The system is equipped with a protective device according to DIN45690. The system has the CE mark. The device comes with 4 vibration feet and a power storage APC Back-UPS ES550. Supplied with the machine is a control PC, monitor, keyboard and pneumatic installation for labor protection. If necessary, experiences or training courses can be exchanged by our balancing technology specialist (calculated according to expenditure). Come to Zella-Mehlis for inspection and testing of the general overhauled machine.
            workpiece weight max. 3 kg
            workpiece length 40 - 500 mm
            diameter 80 mm
            turning speeds max. 3000 U/min
            connected load frequency 230V 50Hz
            total power requirement 0,5 kW
            weight of the machine ca. 220 kg
            dimensions of the machine ca. 1 x 1,5 x 2 m
            Description :
            We offer a small, modern balancing machine for motor anchors of the type TIRA K
            3B. This machine, built in 2005, is now in November 2022 complete overhauled
            from specialists and can be inspected under power. The machine is calibrated
            and with DIN ISO Master Rotor tested and we have acceptance protocol accorting
            DIN VDE 0113.

            It can be balanced with the system in 2 levels. The balancing software is
            TIRA X9000 WIN. There is an operating manual for this.

            The balancing machine offered with machine number R08/05 821165 has one
            Aluminum table with a length of 260mm and clamping fixtures for shorter shafts.
            The rotation is running with 2 drive belts.

            The height of the clamping center is 90mm above the table.
            The maximum rotor diameter is 80mm.
            The bearing point diameter is between 20-50mm.
            The entire table has a support length of 600mm.
            The system is equipped with a protective device according to DIN45690.
            The system has the CE mark.
            The device comes with 4 vibration feet and a power storage APC Back-UPS ES550.

            Supplied with the machine is a control PC, monitor, keyboard and
            pneumatic installation for labor protection.

            If necessary, experiences or training courses can be exchanged by our balancing
            technology specialist (calculated according to expenditure).

            Come to Zella-Mehlis for inspection and testing of the general overhauled
            machine.
          Datasheet
          Request / Contact
          used  Balancing Machine DITTEL F20439


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00445 · Balancing Machine

          DITTEL - F20439 - - - konventionell

          Technical details

          DITTEL balancing head type: F20439 You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Description :
            DITTEL
            balancing head
            type: F20439

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.500 €
          Datasheet
          Request / Contact

          Balancing Machine - Vertical

          used  Balancing Machine - Vertical SCHENCK 110 CBAD


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00348 · Balancing Machine - Vertical

          SCHENCK - 110 CBAD - - 1990 -

          Technical details
          balancing body min/max. 10 kg︱balancing body diameter w/o machining unit 1000 mm︱balancing body diameter with machining unit 600 ︱turning speeds 800 U/min︱connected load 380V 50Hz ︱total power requirement 1,5 kW︱weight of the machine ca. 410 kg︱dimensions of the machine ca. 0,8 x 1,5 x 1,7 m︱
          We offer a SCHENCK 110 CBAD vertical balancing system. This system is in good, working condition. It came from a German automotive supplier that has given up the location. With the system, workpieces with a unit weight of up to 10 kg can be processed in one measuring level unbalances are evaluated. Controlled will be the machine with Module CAB641. We gave the machine a new light gray color scheme on the outside. The Serial number is BAD 0810. Come to Giebelstadt (about 80min. from Frankfurt airport) for inspection of this machine.
            balancing body min/max. 10 kg
            balancing body diameter w/o mach. 1000 mm
            balancing body diameter with mac. 600
            turning speeds 800 U/min
            connected load 380V 50Hz
            total power requirement 1,5 kW
            weight of the machine ca. 410 kg
            dimensions of the machine ca. 0,8 x 1,5 x 1,7 m
            Description :
            We offer a SCHENCK 110 CBAD vertical balancing system. This system is in good, working condition. It came from
            a German automotive supplier that has given up the location.

            With the system, workpieces with a unit weight of up to 10 kg can be processed in one measuring level unbalances are evaluated. Controlled will be the machine with Module CAB641.

            We gave the machine a new light gray color scheme on the outside. The Serial number is BAD 0810.

            Come to Giebelstadt (about 80min. from Frankfurt airport) for inspection of this machine.
          9.350 €
          Datasheet
          Request / Contact

          Hardness Tester

          used  Hardness Tester LECO M-400-H


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00335 · Hardness Tester

          LECO - M-400-H - - 1996 - PC control

          Technical details
          throat 80 mm︱Control PC control ︱Vickers HV 0,1 / 0,3 / 1,0 mm︱total power requirement 0,1 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1,0 x 0,5 x 0,5 m︱
          We quote a VICKERS Hardness tester of type LECO M-400-H This tester is equipped with: - basic tester, adapted for HV 0,1, HV 0,3 HV 1 - with X-Y-precision table 03C0, controlled by PC - PC Shuttle X + with WINDOWS XP + Monitor + keyboard + mouce - with analysation software from PRECIDUR (13 languages can be selected) - with Kappa CF 8/1 camera - PRECIDUR Steppercontroler - lamp with Pro Micron LED Drive LX300 - icluding cables The hardness tester can be inspected under power in our company in Giebelstadt, about 80min from FRANKFURT AIRPORT. Come for inspection. Installation and training is possible by specialist. Travelling and costs must be separate calculated. Additional we can offer Hard-/Software modernization according at request.
            throat 80 mm
            Control PC control
            Vickers HV 0,1 / 0,3 / 1,0 mm
            total power requirement 0,1 kW
            weight of the machine ca. 100 kg
            dimensions of the machine ca. 1,0 x 0,5 x 0,5 m
            Description :
            We quote a VICKERS Hardness tester of type LECO M-400-H This tester is equipped
            with:
            - basic tester, adapted for HV 0,1, HV 0,3 HV 1
            - with X-Y-precision table 03C0, controlled by PC
            - PC Shuttle X + with WINDOWS XP + Monitor + keyboard + mouce
            - with analysation software from PRECIDUR (13 languages can be selected)
            - with Kappa CF 8/1 camera
            - PRECIDUR Steppercontroler
            - lamp with Pro Micron LED Drive LX300
            - icluding cables

            The hardness tester can be inspected under power in our company in Giebelstadt,
            about 80min from FRANKFURT AIRPORT. Come for inspection.


            Installation and training is possible by specialist. Travelling and costs must
            be separate calculated.

            Additional we can offer Hard-/Software modernization according at request.

          Datasheet
          Request / Contact

          horizontal conveyor

          used  horizontal conveyor BÖLLHOFF 03-077


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00422 · horizontal conveyor

          BÖLLHOFF - 03-077 - - - konventionell

          Technical details
          weight 47,8 kg︱component size 5x6 mm︱
          BÖLLHOFF return horizontal conveyor item No. 95246409574 component size 5x6mm type 03-077 or 001606850015 prepared for rivets for connecting elements unused weight 47.8kg Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 47,8 kg
            component size 5x6 mm
            Description :
            BÖLLHOFF
            return horizontal conveyor
            item No. 95246409574
            component size 5x6mm
            type 03-077 or 001606850015
            prepared for rivets
            for connecting elements
            unused
            weight 47.8kg

            Currently there are 3 pieces in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.000 €
          Datasheet
          Request / Contact

          Measuring Machine

          used  Measuring Machine FRENCO URM-R HGA


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00285 · Measuring Machine

          FRENCO - URM-R HGA - - 2007 - PC-Steuerung

          Technical details
          x-travel 750 mm︱y-travel 120 mm︱z-travel 0 mm︱Control PC-Steuerung ︱swing diameter 240 mm︱centre distance 750 mm︱total power requirement 2 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,5 x 1,0 x 2,0 m︱
          We quote an universal gear tester for shaft parts including spline testing of FRENCO. This tester from 2007 has the type URM-R HGA and is a horizontal tester with tailstock and automatic measuring cycle. There are 6 measuring heads adapted and can measure parameters like: - dimension over balls (min./max./average) - runout of gears according to centres - Excentricity - pitch deviations with correlation to excentricity The max. lenght of shaft is 750mm and max. diameter up to 240mm. There are used encoders of HEIDENHAIN and pneumatic by FESTO. Come and inspect this tester in excellent condition in our stock under power. We are about 80min. away from FRANKFURT AIRPORT.
            x-travel 750 mm
            y-travel 120 mm
            Control PC-Steuerung
            swing diameter 240 mm
            centre distance 750 mm
            total power requirement 2 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1,5 x 1,0 x 2,0 m
            Description :
            We quote an universal gear tester for shaft parts including spline testing of
            FRENCO. This tester from 2007 has the type URM-R HGA and is a horizontal tester
            with tailstock and automatic measuring cycle. There are 6 measuring heads
            adapted and can measure parameters like:

            - dimension over balls (min./max./average)
            - runout of gears according to centres
            - Excentricity
            - pitch deviations with correlation to excentricity

            The max. lenght of shaft is 750mm and max. diameter up to 240mm.
            There are used encoders of HEIDENHAIN and pneumatic by FESTO.

            Come and inspect this tester in excellent condition in our stock under power.
            We are about 80min. away from FRANKFURT AIRPORT.
          Datasheet
          Request / Contact

          Roughness Gauge Tester

          used  Roughness Gauge Tester MAHR CP Tastarm 175-M/7.25/6/2.25


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00426 · Roughness Gauge Tester

          MAHR - CP Tastarm 175-M/7.25/6/2.25 - - 2015/16 - konventionell

          Technical details
          year of construction 2015/16 -︱weight 540 g︱height of the tip 2,25 mm︱
          MAHR CP probe arm 175-M/7.25/6/2.25 with double tip height of the tip 2.25mm in storage box with acceptance report manufactured in 2015 and 2016 unused weight 540g You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            year of construction 2015/16 -
            weight 540 g
            height of the tip 2,25 mm
            Description :
            MAHR
            CP probe arm
            175-M/7.25/6/2.25
            with double tip
            height of the tip 2.25mm
            in storage box
            with acceptance report
            manufactured in 2015 and 2016
            unused
            weight 540g

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          800 €
          Datasheet
          Request / Contact

          spiral conveyor

          used  spiral conveyor FELDPAUSCH FS-61


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00420 · spiral conveyor

          FELDPAUSCH - FS-61 - - 2012 - konventionell

          Technical details
          year of construction 2012 -︱weight 398 kg︱voltage 230 V︱total current consumption 0,48 A︱capacity max. 100 VA︱frequency 50 Hz︱
          FELDPAUSCH automatic feeder linear conveyor FS-61 with automatic organizer 0A60 for e.g. flange weld nuts with gripper system on aluminum frame type FS-61 with 0A60-R with 3x PHOENIX CONTACT Interbus motor switches IBS RL 24 DI 16/8-LK-2MBD year of construction 2012 used weight 398kg top condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            year of construction 2012 -
            weight 398 kg
            voltage 230 V
            total current consumption 0,48 A
            capacity max. 100 VA
            frequency 50 Hz
            Description :
            FELDPAUSCH
            automatic feeder
            linear conveyor FS-61
            with automatic organizer 0A60
            for e.g. flange weld nuts
            with gripper system
            on aluminum frame
            type FS-61
            with 0A60-R
            with 3x PHOENIX CONTACT
            Interbus motor switches
            IBS RL 24 DI 16/8-LK-2MBD
            year of construction 2012
            used
            weight 398kg
            top condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.100 €
          Datasheet
          Request / Contact

          Clamping Chuck

          used  Clamping Chuck SMW / EMAG KRS-NZ-250-3-A6


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00421 · Clamping Chuck

          SMW / EMAG - KRS-NZ-250-3-A6 - - - konventionell

          Technical details
          weight 80 kg︱clamping pressure max. 73 kN︱speed 3500 U/min︱
          SMW / EMAG shaft power chuck Fmax = 73kN n = 3500rpm KRS-NZ-250-3-A6 ID 60839 unused in original packaging weight 80kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 80 kg
            clamping pressure max. 73 kN
            speed 3500 U/min
            Description :
            SMW / EMAG
            shaft power chuck
            Fmax = 73kN
            n = 3500rpm
            KRS-NZ-250-3-A6
            ID 60839
            unused
            in original packaging
            weight 80kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.100 €
          Datasheet
          Request / Contact

          Coolant Unit

          used  Coolant Unit STEMKE SK 7000


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00260 · Coolant Unit

          STEMKE - SK 7000 - - 2011 -

          Technical details
          cooling capacity 8900 W︱power capacity 1 kW︱method of construction Kältemittel R404A ︱connected load frequency 400 VAC 50Hz ︱filling amount 10 kg︱total power requirement 10 kW︱weight of the machine ca. 290 kg︱dimensions of the machine ca. 1000 x 1200 x 1400 mm︱
          We offer a temperature control solution for injection- and die-casting tools. This tool cooler is from German manufacturer STEMKE type SK 7000. It allows plastic molds of larger dimensions with up to 8900 W cooling capacity can be greatly cooled down and thus will reduce the cycle times will strongly. The offered facility in light blue color is from the year 2011 and in good condition. The control of the system is carried out via a touchscreen on separate stand. Before reusing this equipment, the seals of system must be changed by refrigeration technician. To the device can additional hose connections be included. A complete documentation and operating instructions etc. are available. As a refrigerant is used R404A. Come to a visit to Giebelstadt, about 80 min. from FRANKFURT airport.
            cooling capacity 8900 W
            power capacity 1 kW
            method of construction Kältemittel R404A
            connected load frequency 400 VAC 50Hz
            filling amount 10 kg
            total power requirement 10 kW
            weight of the machine ca. 290 kg
            dimensions of the machine ca. 1000 x 1200 x 1400 mm
            Description :
            We offer a temperature control solution for injection- and die-casting tools.
            This tool cooler is from German manufacturer STEMKE type SK 7000. It allows
            plastic molds of larger dimensions with up to 8900 W cooling capacity can be
            greatly cooled down and thus will reduce the cycle times will strongly. The
            offered facility in light blue color is from the year 2011 and in good
            condition. The control of the system is carried out via a touchscreen on
            separate stand. Before reusing this equipment, the seals of system must be
            changed by refrigeration technician. To the device can additional hose
            connections be included. A complete documentation and operating instructions
            etc. are available. As a refrigerant is used R404A.
            Come to a visit to Giebelstadt, about 80 min. from FRANKFURT airport.
          Datasheet
          Request / Contact

          Guarded

          used  Guarded HITZESCHUTZTUCH Glasfaser


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00394 · Guarded

          HITZESCHUTZTUCH - Glasfaser - - - konventionell

          Technical details
          length ca. 50 m︱weight of the machine ca. 1250 g/m²︱required space 900x1,25x50000 mm︱
          HEAT PROTECTION CLOTH 1 roll glass fiber fiber 900mm x 1.25mm x approx.50m silicate 1250g/m² Currently there are 3 pieces in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            length ca. 50 m
            weight of the machine ca. 1250 g/m²
            required space 900x1,25x50000 mm
            Description :
            HEAT PROTECTION CLOTH
            1 roll
            glass fiber
            fiber
            900mm x 1.25mm x approx.50m
            silicate
            1250g/m²

            Currently there are 3 pieces in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.300 €
          Datasheet
          Request / Contact

          High-frequency-spindle

          used  High-frequency-spindle JUKOMET 60606003


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-10060 · High-frequency-spindle

          JUKOMET - 60606003 - - 2005 -

          Technical details
          turning speeds 11650 U/min︱overhauled
          High frequency workpiece spindle unit Junkomet 4-pin Type: mW10.6/12-4-28/58r0 speed up to 11,650 rev/min Spindle no. 060606003 Used, very good condition
            turning speeds 11650 U/min
            Description :
            High frequency workpiece spindle unit Junkomet 4-pin Type: mW10.6/12-4-28/58r0 speed up to 11,650 rev/min Spindle no. 060606003 Used, very good condition
          Datasheet
          Request / Contact

          Hydraulic Pumps Unit

          used  Hydraulic Pumps Unit VAG RIKO DN600 PN10


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00306 · Hydraulic Pumps Unit

          VAG - RIKO DN600 PN10 - - 2011 -

          Technical details
          feed pressure 10 bar︱liter capacity DN600 ︱power capacity 4000 Nm︱total power requirement 5 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,5 y 1,5 x 1,5 m︱
          We quote an unused and original packed Ring Piston Valve Plunger of brand VAG and type RIKO DN600 PN10 including AUMA drive motor. There are the following technial datas: Plunger Valve RIKO DN600 PN10 with AUMA gearbox of type GS100.3-F16-N Vers. LL i=208:1 Tein=57Nm Taus =4000Nm Fett F15 Temp -40…+80°C WA-Nr. 91160941/010.1 max. 50°C AKZ: VF 15 S 0001 AS5 weight ca. 1000kg YOP 2011 unused, in best condition Come for inspection to our storage nearby Würzburg/Germany, about 80min. from FFrankfurt airport.
            feed pressure 10 bar
            liter capacity DN600
            power capacity 4000 Nm
            total power requirement 5 kW
            weight of the machine ca. 1 t
            dimensions of the machine ca. 1,5 y 1,5 x 1,5 m
            Description :
            We quote an unused and original packed Ring Piston Valve Plunger of brand VAG
            and type
            RIKO DN600 PN10 including AUMA drive motor.

            There are the following technial datas:

            Plunger Valve
            RIKO DN600 PN10
            with AUMA gearbox of type
            GS100.3-F16-N Vers. LL
            i=208:1
            Tein=57Nm
            Taus =4000Nm
            Fett F15
            Temp -40…+80°C
            WA-Nr. 91160941/010.1
            max. 50°C
            AKZ: VF 15 S 0001
            AS5
            weight ca. 1000kg
            YOP 2011
            unused, in best condition

            Come for inspection to our storage nearby Würzburg/Germany, about 80min. from
            FFrankfurt airport.
          29.999 €
          Datasheet
          Request / Contact

          Lynette

          used  Lynette SMW AUTOBLOK


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00418 · Lynette

          SMW AUTOBLOK - - - - konventionell

          Technical details
          weight 195 kg︱clamping range 8-90 mm︱roller width 25 mm︱rollers diameter 47 mm︱clamping distance 550 mm︱
          SMW AUTOBLOK self-centering bezel clamping range approx. 8 - 90mm roller width 25mm rollers Ø 47mm serial number 381 with large mounting flange clamping distance approx. 550mm featuring holding device used weight 195kg without hydraulic hoses no nameplate visible possibly under the mounting flange You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 195 kg
            clamping range 8-90 mm
            roller width 25 mm
            rollers diameter 47 mm
            clamping distance 550 mm
            Description :
            SMW AUTOBLOK
            self-centering bezel
            clamping range approx. 8 - 90mm
            roller width 25mm
            rollers Ø 47mm
            serial number 381
            with large mounting flange
            clamping distance approx. 550mm
            featuring holding device
            used
            weight 195kg
            without hydraulic hoses
            no nameplate visible
            possibly under the mounting flange

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          2.500 €
          Datasheet
          Request / Contact

          Motor

          used  Motor BOSCH Servomotor SD B5.


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-10055 · Motor

          BOSCH - Servomotor SD B5. - - 2001 -

          Technical details
          power capacity 5,25 kW︱volt 220 V︱ampere 17,2 A︱total power requirement kW︱weight of the machine ca. 60 kg︱dimensions of the machine ca. 1 x 0,3 x 0,3 m︱
          BOSCH Brushless Servo Motor permanent-magnet LORENZ shaping machine used for D-and C-axis Manufacturer: BOSCH Industrial Equipment Erbach Made in Germany Stockno 104-913769 Type SD-01000 B5.250.020 MO 25NM IO 17.2 A J25, 4 10 kgm ² ³ n max 2000min-1 L 15 mH IP 54 Rmin 20k ? PN 5.25 kW R 0.752 ? RK 3.65 ? VDE 0530 I.CL.F 100K UT mV/min1 2.7 Condition: used not tested
            power capacity 5,25 kW
            volt 220 V
            ampere 17,2 A
            weight of the machine ca. 60 kg
            dimensions of the machine ca. 1 x 0,3 x 0,3 m
            Description :
            BOSCH Brushless Servo Motor permanent-magnet LORENZ shaping machine used for D-and C-axis Manufacturer: BOSCH Industrial Equipment Erbach Made in Germany Stockno 104-913769 Type SD-01000 B5.250.020 MO 25NM IO 17.2 A J25, 4 10 kgm ² ³ n max 2000min-1 L 15 mH IP 54 Rmin 20k ? PN 5.25 kW R 0.752 ? RK 3.65 ? VDE 0530 I.CL.F 100K UT mV/min1 2.7 Condition: used not tested
          Datasheet
          Request / Contact
          used  Motor SIEMENS Synchron-Servomotor 1FT7046-5A


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00388 · Motor

          SIEMENS - Synchron-Servomotor 1FT7046-5A - - - konventionell

          Technical details
          turning speed range 4500-9000 U/min︱BRAKE voltage 24 VDC︱weight of the machine ca. 12 kg︱
          SIEMENS SIMOTICS synchronous servo motor 1FT7046-5AH71-1FH1 nmax= 9000rpm nN= 4,500rpm M0=7Nm MN = 2.4Nm UiN= 257VWith encoder AM22DQ A45 IP65 BRAKE 24VDC 14.1W outer flange ring diameter 80mm Shaft diameter 19mm x 40mm length unused Weight 12kg You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            turning speed range 4500-9000 U/min
            BRAKE voltage 24 VDC
            weight of the machine ca. 12 kg
            Description :
            SIEMENS
            SIMOTICS
            synchronous servo motor
            1FT7046-5AH71-1FH1
            nmax= 9000rpm
            nN= 4,500rpm
            M0=7Nm
            MN = 2.4Nm
            UiN= 257VWith encoder AM22DQ A45
            IP65
            BRAKE 24VDC 14.1W
            outer flange ring diameter 80mm
            Shaft diameter 19mm x 40mm length
            unused
            Weight 12kg

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          3.700 €
          Datasheet
          Request / Contact

          Pumping Set

          used  Pumping Set SETTIMA GR90S-SMT16B-1500L


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00353 · Pumping Set

          SETTIMA - GR90S-SMT16B-1500L - - 2018 - konventionell

          Technical details
          Output capacity 85440 kg/h︱Output capacity 1424 l/min︱total power requirement 30 kW︱weight of the machine ca. 454 kg︱required space 200 x 90 x 85 cm︱
          SETTIMA / REXROTH / SIEMENS 30kW screw pump GR90S-SMT16B-1500L nominal output 1200l/min discharge at 2,750rpm approx. 1424l/min at 1450rpm approx. 750l/min Mineral oil pump ran for 600 hours for test purposes Year of construction 2018 immaculate condition with stainless steel tub fixated with vibration damper applied on a mineral oil Shell Tellus 46 with SIEMENS motor 1CV1205B 1LE15922AB521JB4 380V 50Hz 60A 30kW 1500rpm 220V 50Hz 105A 30kW 1500rpm 440V 60Hz 58A 34.5kW 1800rpm 380V 88Hz 97A 48kW 26510rpm Nmax. = 4200rpm IP55 REXROTH type ABPSA-GR90S-SMT16B-1500L 200L 004D458A Intake Ø 120mm Discharge Ø 70mm Dimensions 200x90x85cm Used Weight 454kg Original price in 2018 approx. €45,000 Currently there are still three pumping sets available. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Output capacity 85440 kg/h
            Output capacity 1424 l/min
            total power requirement 30 kW
            weight of the machine ca. 454 kg
            required space 200 x 90 x 85 cm
            Description :
            SETTIMA / REXROTH / SIEMENS
            30kW screw pump
            GR90S-SMT16B-1500L
            nominal output 1200l/min
            discharge at 2,750rpm approx. 1424l/min
            at 1450rpm approx. 750l/min
            Mineral oil pump
            ran for 600 hours for test purposes
            Year of construction 2018
            immaculate condition
            with stainless steel tub
            fixated with vibration damper
            applied on a mineral oil Shell Tellus 46
            with SIEMENS motor
            1CV1205B
            1LE15922AB521JB4
            380V 50Hz 60A 30kW 1500rpm
            220V 50Hz 105A 30kW 1500rpm
            440V 60Hz 58A 34.5kW 1800rpm
            380V 88Hz 97A 48kW 26510rpm
            Nmax. = 4200rpm
            IP55
            REXROTH type
            ABPSA-GR90S-SMT16B-1500L
            200L
            004D458A
            Intake Ø 120mm
            Discharge Ø 70mm
            Dimensions 200x90x85cm
            Used
            Weight 454kg
            Original price in 2018 approx. €45,000

            Currently there are still three pumping sets available.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          8.888 €
          Datasheet
          Request / Contact
          used  Pumping Set HAMMELMANN 55kW 09.14072.2089


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00453 · Pumping Set

          HAMMELMANN - 55kW 09.14072.2089 - - 2015 -

          Technical details
          feed pressure bar︱liter capacity l︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          HAMMELMANN - 55kW high pressure pump - max. pressure 590bar - Flow rate 50l/min - Piston Ø 30mm - Speed 1500rpm - Permissible temperature max. 60°C - Machine no. B5.01072.2260 - Order no. 09.14072.2089 - Year of construction 2015 - used in good condition - Weight 227kg We currently have 2 of this type in stock. Come for a viewing.
            Description :
            HAMMELMANN

            - 55kW high pressure pump
            - max. pressure 590bar
            - Flow rate 50l/min
            - Piston Ø 30mm
            - Speed 1500rpm
            - Permissible temperature max. 60°C
            - Machine no. B5.01072.2260
            - Order no. 09.14072.2089
            - Year of construction 2015
            - used in good condition
            - Weight 227kg

            We currently have 2 of this type in stock.

            Come for a viewing.
          5.600 €
          Datasheet
          Request / Contact
          used  Pumping Set HERMETIC CNF 80-315


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00376 · Pumping Set

          HERMETIC - CNF 80-315 - - 1992 - konventionell

          Technical details
          dimensions of the machine ca. 110x45x80 cmxcmxcm︱air volumen 70 m³/h︱voltage 380 V︱Year of construction 1992 -︱rpm 2950 U/min︱weight of the machine ca. 550 kg︱
          HERMETIC PUMPS / LOHER Canned motor pump Stator with 70m³/h for fluid handled DEIONAT (desalinated water) Type CNF 80-315 Impeller diameter 275mm Engine type CKPX 85Y-2 380V 50Hz 172A 380V Nominal pressure 12bar IP64/67 2950rpm Design overpressure -1/12bar Final pump overpressure 9.8 bar Design temperature 200C liquid temp. max. 100°C Pump material 1.4552/1.4408 Dimensions LxWxH approx. 110x45x80cm Flange diameter left 460mm DN200 with 8 screw holes Flange diameter right 400mm DN200 with 16 screw holes IP64/67unused Weight approx. 550kg Year of construction 1992 unused You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            dimensions of the machine ca. 110x45x80 cmxcmxcm
            air volumen 70 m³/h
            voltage 380 V
            Year of construction 1992 -
            rpm 2950 U/min
            weight of the machine ca. 550 kg
            Description :
            HERMETIC PUMPS / LOHER
            Canned motor pump
            Stator with 70m³/h
            for fluid handled DEIONAT (desalinated water)
            Type CNF 80-315
            Impeller diameter 275mm
            Engine type CKPX 85Y-2
            380V
            50Hz 172A 380V
            Nominal pressure 12bar
            IP64/67
            2950rpm
            Design overpressure -1/12bar
            Final pump overpressure 9.8 bar
            Design temperature 200C
            liquid temp. max. 100°C
            Pump material 1.4552/1.4408
            Dimensions LxWxH approx. 110x45x80cm
            Flange diameter left 460mm DN200
            with 8 screw holes
            Flange diameter right 400mm DN200
            with 16 screw holes
            IP64/67unused
            Weight approx. 550kg
            Year of construction 1992
            unused

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          5.400 €
          Datasheet
          Request / Contact
          used  Pumping Set ZIEHL-ABEGG HYZT.160.29-2


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00427 · Pumping Set

          ZIEHL-ABEGG - HYZT.160.29-2 - - - konventionell

          Technical details
          weight 92 kg︱voltage 380 V︱voltage 50 Hz︱speed 2800 U/min︱current intensivity (n) 95 A︱current intensivity (A) 105 A︱MN 137 Nm︱MA 81 Nm︱length in total 50 cm︱screw-on area 37x33 cm︱hole spacing 32x25 cm︱shaft diameter 32 mm︱flange diameter 30 cm︱hub diameter 30 mm︱total power requirement 40 kW︱
          ZIEHL-ABEGG 40kW motor for screw pump HYZT.160.29-2 380V 50Hz design type IMB15 n=2800rpm In=95A IA=105A MN=137Nm MA=81Nm IP00 total length 50cm screw-on area 37x33cm hole spacing 32x25cm shaft Ø 32mm x 80mm length flange Ø 30cm with 26cm hole spacing hub Ø 30mm weight 92kg unused You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 92 kg
            voltage 380 V
            voltage 50 Hz
            speed 2800 U/min
            current intensivity (n) 95 A
            current intensivity (A) 105 A
            MN 137 Nm
            MA 81 Nm
            length in total 50 cm
            screw-on area 37x33 cm
            hole spacing 32x25 cm
            shaft diameter 32 mm
            flange diameter 30 cm
            hub diameter 30 mm
            total power requirement 40 kW
            Description :
            ZIEHL-ABEGG
            40kW motor for screw pump
            HYZT.160.29-2
            380V 50Hz
            design type IMB15
            n=2800rpm
            In=95A
            IA=105A
            MN=137Nm
            MA=81Nm
            IP00
            total length 50cm
            screw-on area 37x33cm
            hole spacing 32x25cm
            shaft Ø 32mm x 80mm length
            flange Ø 30cm with 26cm hole spacing
            hub Ø 30mm
            weight 92kg
            unused

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.600 €
          Datasheet
          Request / Contact

          Rotary Table

          used  Rotary Table MADER RSE-K-6-4-R-P


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00444 · Rotary Table

          MADER - RSE-K-6-4-R-P - - 2008 - konventionell

          Technical details
          table diameter 180 mm︱height 65 mm︱flange surface 180x180 mm︱drill hole spacing 154 mm︱drive compressed air 5-8 bar︱weight 8,5 kg︱year of construction 2008 - ︱
          MADER rotary indexing unit size 6 Item No. 246840 Serial no. 8V 216186 RSE-K-6-4-R-P table Ø 180mm height 65mm flange surface 180x180mm drill hole spacing 154mm connection R 1/8" control electro-pneumatic drive compressed air 5-8bar weight 8.5kg unused in original packaging You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            table diameter 180 mm
            height 65 mm
            flange surface 180x180 mm
            drill hole spacing 154 mm
            drive compressed air 5-8 bar
            weight 8,5 kg
            year of construction 2008 -
            Description :
            MADER
            rotary indexing unit
            size 6
            Item No. 246840
            Serial no. 8V 216186
            RSE-K-6-4-R-P
            table Ø 180mm
            height 65mm
            flange surface 180x180mm
            drill hole spacing 154mm
            connection R 1/8"
            control electro-pneumatic
            drive compressed air 5-8bar
            weight 8.5kg
            unused
            in original packaging

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          1.600 €
          Datasheet
          Request / Contact
          used  Rotary Table FIBRO NC 2.01.0160.0.1.04.02


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00383 · Rotary Table

          FIBRO - NC 2.01.0160.0.1.04.02 - - 2001 - konventionell

          Technical details
          weight of the machine ca. 250 kg︱Clamping surface 86x22 cm︱height of the machine 27 cm︱Year of construction 2001 -︱
          FIBRO NC rotary table 3-fold NC 2.01.0160.0.1.04.02 with 3x NC 2.01.0160.0.1.00.00 Weight 250kg Clamping surface 86x22cm Height 27cm drive shaft diameter 25mm dividing heads flange diameter 140mm spindle shafts diameter 24mm Year of construction 2001 used very good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight of the machine ca. 250 kg
            Clamping surface 86x22 cm
            height of the machine 27 cm
            Year of construction 2001 -
            Description :
            FIBRO
            NC rotary table 3-fold
            NC 2.01.0160.0.1.04.02
            with 3x NC 2.01.0160.0.1.00.00
            Weight 250kg
            Clamping surface 86x22cm
            Height 27cm
            drive shaft diameter 25mm
            dividing heads flange diameter 140mm
            spindle shafts diameter 24mm
            Year of construction 2001
            used
            very good condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
          4.200 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Zuefle GmbH   97232 - Giebelstadt Levi-Strauss-Str. 121 Deutschland
          Zuefle GmbH

          Levi-Strauss-Str. 121



          Contact Trader


            Zuefle GmbH
           Levi-Strauss-Str. 121
            97232 - Giebelstadt
            Deutschland
            +49 (0)9334-978608-0
            +49 (0)9334-978608-2
            info@zuefle.com
            www.zuefle.com
            Contact person:

           




          Machine category


          Ampullen Inspektionsmaschine · Anlage · Auswuchtmaschine · Auswuchtmaschine - Vertikal · Bearbeitungszentrum - Vertikal · Bolzenschweißgerät · Container · Drehmaschine-konventionell-elektronisch · Einhand-Magazinschrauber · Elektronik / SPS-Steuerungen · Ersatzteile · Filteranlage · Form-Messmaschine · Frequenzumformer · Förderband · Geräuschprüfmaschine · Hallenheizung · Hauswasserwerk · Hochfrequenzspindel · Hydraulikaggregat · Härteprüfer · Kegelradfräsmaschine-Bogenverzahnung · Kegelradfräsmaschine-Geradverzahnung · Kettenzug - von Hand · Kompressor und Druckluftaufbereitung · Kopierdrehmaschine · Kraftwerk · Kraftwerk - Dampf · Kraftwerk - Wasser · Krananlagen · Kühlanlagen Lebensmitteltechnik · Kühlmittelanlage · Labormischer · Linearförderer · Loch- und Prägepresse · Lynette · Messmaschine · Messsystem · Motor · Nahrungsmittelmaschinen - Diverse · Nietmaschine · Pneumatikartikel · Profilprojektor · Pumpenaggregat · Punktschweißmaschine · Rauhheitsprüfgerät · Reinigungsanlage · Roboter - Handling · Roboter - Schweißen · Rundtisch · Rührwerkskugelmühle · Schmutzwasser Baupumpe · Schutzschirm · Spannfutter · Ventilator · Waage · Warmluftofen · Wasseraufbereitung · Wendelförderer · Werkbänke · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnradlaufprüfmaschine · Zahnradstossmaschine ·