,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe ARIX TNC - 430


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7008 · CNC Lathe

          ARIX - TNC - 430 - - 2013 - CNC

          Technical details
          turning diameter 430 mm︱turning length 1000 mm︱control CNC ︱turning diameter over bed slide 277 mm︱spindle passage 30 mm︱number of spindle speeds 30 - 2800 U/min︱x-axis 240 mm︱z-axis 700 mm︱total power requirement 10 kW︱weight of the machine ca. 3000 kg︱dimensions of the machine ca. 2500 x 1900 x 1900 mm︱
          Furnishing: - 3-jaw chuck Ø200 mm - 4 compartment steel holder - Coolant device - Machine light
            turning diameter 430 mm
            turning length 1000 mm
            control CNC
            turning diameter over bed slide 277 mm
            spindle passage 30 mm
            number of spindle speeds 30 - 2800 U/min
            x-axis 240 mm
            z-axis 700 mm
            total power requirement 10 kW
            weight of the machine ca. 3000 kg
            dimensions of the machine ca. 2500 x 1900 x 1900 mm
            Description :
            Furnishing:
            - 3-jaw chuck Ø200 mm
            - 4 compartment steel holder
            - Coolant device
            - Machine light
          Datasheet
          Request / Contact
          used  CNC Lathe YUNNAN CY-K660T


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6506 · CNC Lathe

          YUNNAN - CY-K660T - - 2013 -

          Technical details
          turning diameter 660 mm︱turning length 1500 mm︱control FAGOR ︱centre height 330 mm︱spindle passage 82 mm︱number of spindle speeds 30-2000 U/min︱bed width 390 mm︱rapid speed X/Z 4 - 8 m/min︱tailstock quill diameter 75 mm︱Main spindle capacity 15 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,8 x 1,8 x 2,15 m︱control
          - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks
            turning diameter 660 mm
            turning length 1500 mm
            control FAGOR
            centre height 330 mm
            spindle passage 82 mm
            number of spindle speeds 30-2000 U/min
            bed width 390 mm
            rapid speed X/Z 4 - 8 m/min
            tailstock quill diameter 75 mm
            Main spindle capacity 15 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,8 x 1,8 x 2,15 m
            Description :

            - FANUC Series 18i TB Control, Manual Guide i Function
            - Central control panel for machine and CNC control on the pedal arm 45 °
            swiveling
            - 12-fold tool turret
            - Fanuc drive with 30 kW (50% ED)
            - Chip conveyor
            - Bezel
            - 3 jaw chucks
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic Pinacho S90-180


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200045 · lathe-conventional-electronic

          Pinacho - S90-180 - - unbekannt -

          Technical details
          turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 200 mm︱turning speeds 30 - 2000 U/min︱spindle bore 42 mm︱quill stroke 150 mm︱tailstock quill taper MT 3 ︱total power requirement 2,5 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 2200 x 850 x 140 mm︱
          - 4-jaw chuck Ø160 mm RÖHM - MULTIFIX quick-change holder with 1x insert - movable tailstock - Lathe chuck protection - Chip back wall - Operation manual
            turning diameter 360 mm
            turning length 1000 mm
            swing diameter over bed slide 200 mm
            turning speeds 30 - 2000 U/min
            spindle bore 42 mm
            quill stroke 150 mm
            tailstock quill taper MT 3
            total power requirement 2,5 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 2200 x 850 x 140 mm
            Description :
            - 4-jaw chuck Ø160 mm RÖHM
            - MULTIFIX quick-change holder with 1x insert
            - movable tailstock
            - Lathe chuck protection
            - Chip back wall
            - Operation manual

          Datasheet
          Request / Contact
          used  lathe-conventional-electronic WEILER Praktikant


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6622 · lathe-conventional-electronic

          WEILER - Praktikant - - unbekannt -

          Technical details
          turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore 35 mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱
            turning diameter over bed 300 mm
            turning diameter over slide rest 150 mm
            turning length 800 mm
            spindle bore 35 mm
            turning speed range 42 - 2000 U/min
            feeds 0,011 - 0,91 mm/U
            tailstock quill taper MT 3
            total power requirement 2,2 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,7 x 0,8 x 2,0 m
            Description :

          Datasheet
          Request / Contact
          used  lathe-conventional-electronic MVE BAUART VDF V 5 - 2000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-6040 · lathe-conventional-electronic

          MVE BAUART VDF - V 5 - 2000 - - unbekannt -

          Technical details
          turning diameter over bed 580 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle passage 81 mm︱turning speeds 18 ︱turning speed range 19 - 950 U/min︱total power requirement 11 kW︱weight of the machine ca. ca. 4,8 t︱dimensions of the machine ca. 4,5 x 1,8 x 1,6 m︱
          Electric 380Volt 3-jaw chuck Forkardt F 315 Quick change steel holder with various inserts machine light Machine feet (6 pieces) Revolving tip Coolant system
            turning diameter over bed 580 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle passage 81 mm
            turning speeds 18
            turning speed range 19 - 950 U/min
            total power requirement 11 kW
            weight of the machine ca. ca. 4,8 t
            dimensions of the machine ca. 4,5 x 1,8 x 1,6 m
            Description :
            Electric 380Volt
            3-jaw chuck Forkardt F 315
            Quick change steel holder with various inserts
            machine light
            Machine feet (6 pieces)
            Revolving tip
            Coolant system
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BULMAK / ZMM CU400/1500


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200002 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1500 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1500 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2430 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1500 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2430 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BULMAK / ZMM CU325/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200003 · lathe-conventional-electronic

          BULMAK / ZMM - CU325/1000 - - NEU -

          Technical details
          turning diameter 325 mm︱turning length 1000 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 440 mm︱reus 12 (85-2000) U/min︱tail stock MK 3 ︱quill stroke 100 mm︱diameter of quill 40 mm︱spindle taper DIN 55027 Nr. 5 ︱spindle bore 32 mm︱feed längs 0,006 - 1,77 m/min︱feed quer 0,003 - 0,885 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 770 kg︱dimensions of the machine ca. 2150 x 950 x 1350 mm︱
          Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall
            turning diameter 325 mm
            turning length 1000 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 440 mm
            reus 12 (85-2000) U/min
            tail stock MK 3
            quill stroke 100 mm
            diameter of quill 40 mm
            spindle taper DIN 55027 Nr. 5
            spindle bore 32 mm
            feed längs 0,006 - 1,77 m/min
            feed quer 0,003 - 0,885 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 770 kg
            dimensions of the machine ca. 2150 x 950 x 1350 mm
            Description :
            Furnishing:
            - Cooling device
            - Machine light
            - chip rear wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Foot pedal with braking function CE
            - Interchangeable gears

            *incl. Optional equipment
            - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type A, incl. 4 tool holders
            - 2-axis digital display DRO Newall
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic OPTIMUM OPTIturn TH4215D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200001 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH4215D - - NEU -

          Technical details
          turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱
          Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH5-B set
            turning diameter 420 mm
            turning length 1500 mm
            swing diameter over bed slide 250 mm
            Swingdiameter in the bed bridge 590 mm
            centre height 210 mm
            Turning length in the bed bridge 260 mm
            reus 16 (45-1800) U/min
            tail stock MK 4
            quill stroke 120 mm
            diameter of quill 50 mm
            spindle taper DIN ISO 702-2 Nr. 6
            spindle bore 52 mm
            spindle cone MK 6
            feed längs 17 / 0,05 - 1,7 m/min
            feed plan 17 / 0,025 - 0,85 m/min
            total power requirement 4,6 kW
            weight of the machine ca. 1340 kg
            dimensions of the machine ca. 2440 x 915 x 1375 mm
            Description :
            Fully equipped master and feed spindle lathes. TH 4215 with
            digital position indicator DPA 21 / 3462070

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 6
            - Precisely crafted slide
            - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Adjustment range top slide ± 90°
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Main spindle running in oil bath
            - Smooth-running gear wheels, hardened and ground with 2 adjustable
            Precision tapered roller bearings
            - Hand wheels decoupled and tested according to EN 23125
            - Two-channel right-left switch tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - All metric pitches in the range 0.2 to 14mm/rev and all
            Inch threads in the range of 72 - 2 threads per inch without changing the
            Change gears adjustable by shift lever in the control panel
            - Clockwise/counterclockwise rotation can be switched on the bed slide via the
            switching spindle
            - Central lubrication in bed slide
            - Meehanite cast base and machine bed in one piece
            - Lead screw cover
            - Emergency stop device with foot control
            - Safety handwheels with snap-out function in the X and Z axes
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, induction hardened and precision ground
            cast iron
            - Coolant device with separate coolant tank with level indicator and
            oil separator; easy and complete emptying and cleaning according to DIN
            - LED machine lamp in the chip guard

            Models TH 4210D and TH 4215D with digital readout DPA21
            - User-friendly membrane keyboard, splash-proof, closed
            andglare-free
            - Glass scales

            scope of delivery
            - Fixed bezel passage Ø 15 - 145 mm
            - Revolving bezel passage Ø 10 - 75 mm
            - LED machine light
            - Reducing sleeve MT 6 / MT 4
            - Fixed center MK 4
            - Change gear set
            - Position stop with fine adjustment
            - Initial filling of the machine with quality oil
            - Operating tool

            ** Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø
            250 mm
            ** Quick change holder SWH5-B set
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7375 · lathe-conventional-electronic

          OPTIMUM - OPTIturn TH 3309D - - NEU -

          Technical details
          turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱
          Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
            turning diameter 330 mm
            turning length 830 mm
            swing diameter over bed slide 196 mm
            Swingdiameter in the bed bridge 170
            centre height 165 mm
            centre distance 830 mm
            Turning length in the bed bridge 430
            reus 16 (70-2000) U/min
            tail stock MK 3
            quill stroke 110 mm
            diameter of quill 32 mm
            spindle taper DIN ISO 702-2 Nr. 4
            spindle bore 38 mm
            spindle cone MK 5
            feed längs 32 / 0,052 1,392 m/min
            feed plan 3,2 / 0,014 0,38 m/min
            weight of the machine ca. 0,52 t
            dimensions of the machine ca. 1,7 x 0,75 x 1,6 m
            Description :
            Fully equipped leading and tension spindle lathes. TH 3309D with
            digital position indicator DPA 21/3402040

            - Hardened and ground Z-axis guideway
            - Spindle mount Camlock DIN ISO 702-2 No. 4
            - Precisely crafted slide
            - Handwheels with adjustable fine scale 0.04 / 0.02 mm
            - Quadruple steel holder
            - All guides can be adjusted using V-ledges
            - Main spindle running in an oil bath
            - Gear wheels run smoothly, hardened and ground
            - Upper slide adjustment range ± 90 °
            - Guaranteed concentricity of the spindle nose better than 0.015 mm
            - Handwheels decoupled and tested according to EN 23125
            - Safety handwheels with push-out function in the X and Z axes
            - Two-channel right-left switch tested according to EN 23125
            - DC 24 volt electrical system with two-channel safety circuit according to EN
            23125
            - Lathe chuck protection tested according to EN 23125
            - Switch with life cycle calculation, tested according to EN ISO 13849
            - Lockable main switch
            - Clockwise / counterclockwise rotation on the bed slide switchable
            - Lead screw cover
            - Tailstock for taper turning adjustable ± 10 mm
            - Tailstock quill and handwheel with adjustable fine scale 0.02 mm
            - Quick, easy and tool-free adjustment using a clamping lever
            - Heavily ribbed prism bed, inductively hardened and precision ground
            - Machine base with tool compartment on the right-hand side (left-hand side
            with 3
            Bezels (no compartments)
            - Pull-out chip tray with guide rails
            - Emergency stop device with foot actuation
            - LED machine lamp integrated in the chip guard

            Digital position indicator DPA 21
            - User-friendly membrane keyboard, splash-proof, closed
            and glare-free
            - glass rulers

            scope of delivery
            - Fixed steady rest passage Ø 6 - Ø 50 mm
            - Moving steady rest passage Ø 8 - Ø 30 mm
            - LED machine light
            - Reduction sleeve MK 5 / MK 3
            - Two fixed centering points MK 3
            - Quadruple steel holder 16 mm
            - Change gears set
            - machine base
            - Initial machine filling with quality oil
            - operating tool

            ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
            Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BULMAK / ZMM C10TM/3000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200004 · lathe-conventional-electronic

          BULMAK / ZMM - C10TM/3000 - - NEU -

          Technical details
          turning diameter 760 mm︱turning length 3000 mm︱swing diameter over bed slide 520 mm︱centre height 380 mm︱reus 17 (7,5 - 1015) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 132 mm︱feed längs 0,039 - 18 mm/min︱feed quer 0,02 - 9 mm/min︱total power requirement 15 kW︱weight of the machine ca. 4700 kg︱dimensions of the machine ca. 4900 x 1650 x 1650 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 760 mm
            turning length 3000 mm
            swing diameter over bed slide 520 mm
            centre height 380 mm
            reus 17 (7,5 - 1015) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 132 mm
            feed längs 0,039 - 18 mm/min
            feed quer 0,02 - 9 mm/min
            total power requirement 15 kW
            weight of the machine ca. 4700 kg
            dimensions of the machine ca. 4900 x 1650 x 1650 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BULMAK / ZMM CU400/1000


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200005 · lathe-conventional-electronic

          BULMAK / ZMM - CU400/1000 - - NEU -

          Technical details
          turning diameter 440 mm︱turning length 1000 mm︱swing diameter over bed slide 210 mm︱Swingdiameter in the bed bridge 620 mm︱centre height 210 mm︱reus 21 (20 - 2000) U/min︱tail stock MK5 ︱quill stroke 180 mm︱diameter of quill 70 mm︱spindle taper DIN 55027 Nr. 8 ︱spindle bore 62 mm︱feed längs 0,04 - 12 m/min︱feed quer 0,02 - 6 m/min︱total power requirement 7,5 kW︱weight of the machine ca. 2250 kg︱dimensions of the machine ca. 2450 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 440 mm
            turning length 1000 mm
            swing diameter over bed slide 210 mm
            Swingdiameter in the bed bridge 620 mm
            centre height 210 mm
            reus 21 (20 - 2000) U/min
            tail stock MK5
            quill stroke 180 mm
            diameter of quill 70 mm
            spindle taper DIN 55027 Nr. 8
            spindle bore 62 mm
            feed längs 0,04 - 12 m/min
            feed quer 0,02 - 6 m/min
            total power requirement 7,5 kW
            weight of the machine ca. 2250 kg
            dimensions of the machine ca. 2450 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic BULMAK / ZMM C10T


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2200006 · lathe-conventional-electronic

          BULMAK / ZMM - C10T - - NEU -

          Technical details
          turning diameter 660 mm︱turning length 1500 mm︱swing diameter over bed slide 420 mm︱Swingdiameter in the bed bridge 850 mm︱centre height 330 mm︱reus 15 (9 - 1320) U/min︱tail stock MK6 ︱quill stroke 225 mm︱diameter of quill 105 mm︱spindle bore 103 mm︱feed längs 0,039 - 18 m/min︱feed quer 0,02 - 9 m/min︱total power requirement 11 kW︱weight of the machine ca. 4170 kg︱dimensions of the machine ca. 2850 x 980 x 1330 mm︱
          - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE
            turning diameter 660 mm
            turning length 1500 mm
            swing diameter over bed slide 420 mm
            Swingdiameter in the bed bridge 850 mm
            centre height 330 mm
            reus 15 (9 - 1320) U/min
            tail stock MK6
            quill stroke 225 mm
            diameter of quill 105 mm
            spindle bore 103 mm
            feed längs 0,039 - 18 m/min
            feed quer 0,02 - 9 m/min
            total power requirement 11 kW
            weight of the machine ca. 4170 kg
            dimensions of the machine ca. 2850 x 980 x 1330 mm
            Description :
            - Coolant device
            - Machine light
            - Chip back wall
            - Spindle protection
            - Lathe chuck protection
            - Tool holder protection
            - Interchangeable gears

            *Special equipment
            - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON
            - MULTIFIX quick-change holder type B, including 4 tool holders
            - 3-axis digital display DRO Newall
            - Foot pedal with brake function CE
          Datasheet
          Request / Contact
          used  lathe-conventional-electronic OERLIKON-BOEHRINGER DUE 500


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3200048 · lathe-conventional-electronic

          OERLIKON-BOEHRINGER - DUE 500 - - 1985 -

          Technical details
          turning diameter 500 mm︱turning length 1250 mm︱swing diameter over bed slide 285 mm︱turning speeds 11,2 - 2240 U/min︱spindle bore 62 mm︱quill stroke 190 mm︱tailstock quill taper MT 5 ︱total power requirement 13,0 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 3350 x 1500 x 1300 mm︱
          - MULTIFIX steel holder - RÖHM 4-jaw chuck Ø250 mm - Lathe chuck protection - Chip protection rear wall
            turning diameter 500 mm
            turning length 1250 mm
            swing diameter over bed slide 285 mm
            turning speeds 11,2 - 2240 U/min
            spindle bore 62 mm
            quill stroke 190 mm
            tailstock quill taper MT 5
            total power requirement 13,0 kW
            weight of the machine ca. 3200 kg
            dimensions of the machine ca. 3350 x 1500 x 1300 mm
            Description :
            - MULTIFIX steel holder
            - RÖHM 4-jaw chuck Ø250 mm
            - Lathe chuck protection
            - Chip protection rear wall
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine BERNARDO BM25T 400V


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100019 · Bench Drilling Machine

          BERNARDO - BM25T 400V - - 2021 -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 180 mm︱bore stroke 80 mm︱ MK 2305 x 305 mm︱spindle turning speed range (16) 180-2770 U/min︱total power requirement 0,75 / 1,1 kW︱weight of the machine ca. 57 kg︱dimensions of the machine ca. 400 x 630 x 990 mm︱
            bore capacity in steel (diameter. 25 mm
            throat 180 mm
            bore stroke 80 mm
            MK 2
            305 x 305 mm
            spindle turning speed range (16) 180-2770 U/min
            total power requirement 0,75 / 1,1 kW
            weight of the machine ca. 57 kg
            dimensions of the machine ca. 400 x 630 x 990 mm
            Description :

          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine HMB PBM 1000/60


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-5955 · Jig Boring Machine

          HMB - PBM 1000/60 - - 1996 -

          Technical details
          spindle diameter 60 mm︱x-travel max. 1000 - min. 100 mm︱y-travel max. 1000 - min. 100 mm︱bore capacity in steel max. 40 mm︱thread capacity max. M24 ︱Thickness max. 60 - min. 5 mm︱spindle turning speed - stepless einstellbar 1 - 1.000 U/min︱feed stepless einstellbar, Eilgang 1 - mm/min︱feed stepless einstellbar, Arbeitsgang mm/min︱feed power 16 KN︱tool taper SK 40 ︱spindle stroke 600 mm︱positioning speed in allen Achsen 1 - 10.00 mm/min︱positioning accuracy auf 300 mm = +/- 0,01 mm︱table load max. 500 kg︱work height max. 1000 mm︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,5 x 3,3 x 3,1 m︱Control Bosch
          CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA
            spindle diameter 60 mm
            x-travel max. 1000 - min. 100 mm
            y-travel max. 1000 - min. 100 mm
            bore capacity in steel max. 40 mm
            thread capacity max. M24
            Thickness max. 60 - min. 5 mm
            spindle turning speed - stepless einstellbar 1 - 1.000 U/min
            feed stepless einstellbar, Eilgang 1 - mm/min
            feed stepless einstellbar, Arbeitsgang mm/min
            feed power 16 KN
            tool taper SK 40
            spindle stroke 600 mm
            positioning speed in allen Achsen 1 - 10.00 mm/min
            positioning accuracy auf 300 mm = +/- 0,01 mm
            table load max. 500 kg
            work height max. 1000 mm
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 3,5 x 3,3 x 3,1 m
            Control Bosch
            Description :
            CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and
            Base plates in steel construction with tool changer (12x)

            Number of drilling spindles: 1 pc.
            Operating Voltage: 220/380V
            Frequency: 50 Hz
            Total connection value: 22 kVA
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine FLOTT SB 14


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3100001 · Pillar Drilling Machine

          FLOTT - SB 14 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 14 mm︱throat 200 mm︱bore stroke 60 mm︱morse taper 1 MK︱table: 280 x 260 mm︱turning speeds 430 - 4500 U/min︱column diameter 70 mm︱weight 100 kg︱
            bore capacity in steel (diameter. 14 mm
            throat 200 mm
            bore stroke 60 mm
            morse taper 1 MK
            table: 280 x 260 mm
            turning speeds 430 - 4500 U/min
            column diameter 70 mm
            weight 100 kg
            Description :

          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL ALZSTAR 30 iTRONIC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7189 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 30 iTRONIC - - NEU -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 293 mm︱bore stroke 140 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 225 - 4300 U/min︱total power requirement 1,0 / 1,6 kW︱weight of the machine ca. 260 kg︱dimensions of the machine ca. H: 1790 mm︱
            bore capacity in steel (diameter. 30 mm
            throat 293 mm
            bore stroke 140 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 225 - 4300 U/min
            total power requirement 1,0 / 1,6 kW
            weight of the machine ca. 260 kg
            dimensions of the machine ca. H: 1790 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine IBERDRILL AZ 34 PSR + Fuessschalter


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100025 · Pillar Drilling Machine

          IBERDRILL - AZ 34 PSR + Fuessschalter - - NEU -

          Technical details
          bore capacity in steel (diameter) 34 mm︱throat 300 mm︱bore stroke 150 mm︱bore capacity in cast iron (diameter) 40 mm︱thread capacity M 27 ︱spindle taper MT 4 ︱spindle speeds: Stufenlos 100 - 2000 U/min︱column diameter 125 mm︱automatic feeds 3 / 0,1 - 0,2 - 1,3 ︱table: 400 x 420 mm︱Drive Keilriemen ︱total power requirement 3 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 2,3 x 0,6x 1,1 m︱
          Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking
            bore capacity in steel (diameter. 34 mm
            throat 300 mm
            bore stroke 150 mm
            bore capacity in cast iron (diam. 40 mm
            thread capacity M 27
            spindle taper MT 4
            spindle speeds: Stufenlos 100 - 2000 U/min
            column diameter 125 mm
            automatic feeds 3 / 0,1 - 0,2 - 1,3
            table: 400 x 420 mm
            Drive Keilriemen
            total power requirement 3 kW
            weight of the machine ca. 360 kg
            dimensions of the machine ca. 2,3 x 0,6x 1,1 m
            Description :
            Column drilling machines - V-belt drive with foot switch

            - Drilling machine of circular column feed automaticmechanical
            - Drive by electronic wide V-belt
            - Spindle taper: CM 4
            - Stepless speed adjustment with frequency converter
            - Potentiometer for speed adjustment
            - digital speed display
            - Automatic feed reversal when threading
            - Scale with adjustable drilling depth - automatic tool ejector
            - Push button for EMERGENCY STOP switch for right/left rotation
            - Electronic control integrated in the drill head - integrated coolant device
            - Machine light - height-adjustable chip protection disc with micro switch
            - fixed table
            - CE marking
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine SBN SB 45 B


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8165123 · Pillar Drilling Machine

          SBN - SB 45 B - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 255 mm︱bore stroke 120 mm︱speeds 24 ︱turning speed range 75 - 2700 U/min︱Motor output 1100 / 1500 W︱weight of the machine ca. 138 kg︱
            bore capacity in steel (diameter. 40 mm
            throat 255 mm
            bore stroke 120 mm
            speeds 24
            turning speed range 75 - 2700 U/min
            Motor output 1100 / 1500 W
            weight of the machine ca. 138 kg
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine SBN SB 35 B


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-8165281 · Pillar Drilling Machine

          SBN - SB 35 B - - NEU -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 220 mm︱bore stroke 80 mm︱speeds 24 ︱turning speed range 60 - 2580 U/min︱Motor output 750 / 1100 W︱weight of the machine ca. 90 kg︱
            bore capacity in steel (diameter. 30 mm
            throat 220 mm
            bore stroke 80 mm
            speeds 24
            turning speed range 60 - 2580 U/min
            Motor output 750 / 1100 W
            weight of the machine ca. 90 kg
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL AX 4 iTRONIC


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100017 · Pillar Drilling Machine

          ALZMETALL - AX 4 iTRONIC - - NEU -

          Technical details
          bore capacity in steel (diameter) 55,0 mm︱throat 300 mm︱bore stroke 140 mm︱morse taper 4 MK︱table: 615 x 430 mm︱turning speeds 70 - 1.200 U/min︱engine output 1,8 / 2,9 kW︱column diameter 145 mm︱thread M30 ST60︱thread M36 GG20︱feed 0,10 + 0,30 mm/U︱weight 380 kg︱Machine height 1850 mm︱
          ** NEW ALZMETALL MODEL RANGE ** 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base
            bore capacity in steel (diameter. 55,0 mm
            throat 300 mm
            bore stroke 140 mm
            morse taper 4 MK
            table: 615 x 430 mm
            turning speeds 70 - 1.200 U/min
            engine output 1,8 / 2,9 kW
            column diameter 145 mm
            thread M30 ST60
            thread M36 GG20
            feed 0,10 + 0,30 mm/U
            weight 380 kg
            Machine height 1850 mm
            Description :
            ** NEW ALZMETALL MODEL RANGE **

            7 "TFT - LCD display with touch function:
            * Spindle speed setpoint
            * Actual speed display
            * Integrated drilling depth display
            * with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Machine status displays and warnings in the display
            * Service information
            * Selectable user language: DE / EN / FR / ES / IT / NL / RU.

            Furnishing:
            - Thread cutting device
            * for thread cutting with a stop
            * max. 6 threads / min (thread cutting performance depends on the spindle speed)
            * Thread depth adjustable via depth stop
            * in the TFT - LCD display (3 tools).
            - automatic spindle feed with feed overload protection
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - counterclockwise rotation -
            stop
            - Mushroom pushbutton (latching) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts
            - Protection class IP 54
            - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black
            - Machine oil first filling: oil bottle, loose delivery

            including special accessories:
            - 12. LED machine light
            - 24. Coolant system A * in the machine base
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine ALZMETALL ALZSTAR 40 iTRONIC - V


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7192 · Pillar Drilling Machine

          ALZMETALL - ALZSTAR 40 iTRONIC - V - - NEU -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,45 / 1,90 kW︱weight of the machine ca. 285 kg︱dimensions of the machine ca. H: 1840 mm︱
          - 7"TFT LCD display with touch function: * Manual input of spindle speed setpoint * Speed display actual value * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Service information * Selectable user language: DE/EN/FR/ES/IT/NL/RU - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (locking) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts, protection class IP54 - Feed overload protection - Machine oil first fill; Oil bottle, loose delivery - Paint finish: DD structure paint signal white RAL 9003, Pantone 7545c, black
            bore capacity in steel (diameter. 40 mm
            throat 293 mm
            bore stroke 120 mm
            spindle taper MT 3
            column diameter 115 mm
            table surface area 514 x 360 mm
            spindle turning speed - stepless 160 - 2250 U/min
            total power requirement 1,45 / 1,90 kW
            weight of the machine ca. 285 kg
            dimensions of the machine ca. H: 1840 mm
            Description :
            - 7"TFT LCD display with touch function:
            * Manual input of spindle speed setpoint
            * Speed display actual value
            * Integrated drilling depth display with touch zero point transfer
            * Virtual drilling depth scale in the display
            * Service information
            * Selectable user language: DE/EN/FR/ES/IT/NL/RU
            - Infinitely variable speed setting by means of an adjusting lever
            - Spindle protection with electrical fuse
            - Three separate buttons for clockwise rotation - counterclockwise rotation -
            stop
            - Mushroom pushbutton (locking) for EMERGENCY STOP
            - Main switch, lockable
            - Right and left rotation by contactor control
            - Control voltage 24 volts, protection class IP54
            - Feed overload protection
            - Machine oil first fill; Oil bottle, loose delivery
            - Paint finish: DD structure paint signal white RAL 9003, Pantone 7545c, black
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine OPTIdrill DP 33V Aktions-Set


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7365 · Pillar Drilling Machine

          OPTIdrill - DP 33V Aktions-Set - - NEU -

          Technical details
          bore capacity in steel (diameter) 30 mm︱throat 270 mm︱bore stroke 125 mm︱ 4 ︱Motor output 9 ︱speeds 70 - 2800 U/min︱
          Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice
            bore capacity in steel (diameter. 30 mm
            throat 270 mm
            bore stroke 125 mm
            4
            Motor output 9
            speeds 70 - 2800 U/min
            Description :
            Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET
            With an electronically controllable drive in a modern design

            * Industrial engine
            * Quiet running spindle thanks to new spindle design
            * Machine operation with safety electronics in 24 V direct current
            * Guaranteed concentricity = 0.02 mm in the measured drilling spindle
            * Clockwise/counterclockwise rotation
            * Precision spindle bore
            * Control panel with user-friendly, dirt and water resistant
            * Membrane keyboard
            * RPM display
            * Separate emergency stop button
            * Tapping function
            * Precisely crafted, stable drill table with diagonal T-slots
            with all-round cooling water channel, can be tilted sideways by ±45° and
            rotated by 360°
            * Drilling depth stop
            * LED machine light integrated in the drill head
            * V-belt cover with safety switch
            * Thick-walled steel column for high power absorption and stability
            * Solid, large base plate with T-slots
            * Execution of the entire machine

            Scope of delivery:
            - Keyless drill chuck 0 - 16 mm
            - T-Nuts
            -expectors
            - Operating tool
            - BMP 160 machine vice
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine HM MACHINERY SBM 32 F AUT


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2100020 · Pillar Drilling Machine

          HM MACHINERY - SBM 32 F AUT - - NEU -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 300 mm︱bore stroke 160 mm︱morse taper 4 MK︱table: 460 x 460 mm︱turning speeds 75 - 3200 U/min︱engine output 1,5 kW︱column diameter 125 mm︱thread M16 ST60︱feed 0,10/0,18/0,26 mm/U︱dimensions 800 x 500 x 2200 mm︱weight 350 kg︱
          - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.
            bore capacity in steel (diameter. 32 mm
            throat 300 mm
            bore stroke 160 mm
            morse taper 4 MK
            table: 460 x 460 mm
            turning speeds 75 - 3200 U/min
            engine output 1,5 kW
            column diameter 125 mm
            thread M16 ST60
            feed 0,10/0,18/0,26 mm/U
            dimensions 800 x 500 x 2200 mm
            weight 350 kg
            Description :
            - automatic drill feeds (magnetic clutch)
            - Height adjustable and angle adjustable table
            - Movable work table
            - Integrated cooling system
            - Powerful engine
            - 3 hand levers for drilling feed
            - Safety shield with limit switch
            - Separate emergency stop
            - Built-in working lights
            - Incl. drill chuck 16mm - B16
            - Built-in automatic thread cutting.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik  49779 - Niederlangen Fresenburger Weg 4 Deutschland


          Contact Trader


            Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik
           Fresenburger Weg 4
            49779 - Niederlangen
            Deutschland
            +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
            maschinen@heinz-sanders.de
            www.heinz-sanders.de
            Contact person:
          Frau Christine Fokken +49 (0) 5939 9406 40

           




          Machine category


          · Abkantpresse - hydraulisch · Absaugung · Airless- und Farbspritzgerät · Arbeitsbühne · Ausklinkmaschine · Bandschleifmaschine · Bandsäge · Bandsäge - Vertikal · Bearbeitungszentrum · Behälterdrehvorrichtung · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Biegemaschine horizontal · Blechbiegemaschine - 3 Walzen · Blechrichtmaschinen · Bohrerschleifmaschine · Brennschneidemaschine · Bügelsäge · CNC Drehmaschine · Container · Doppelgehrungssäge · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drehmaschine-konventionell-elektronisch · Einständerpresse - Hydraulisch · Entgratmaschine · Fräsmaschine - Universal · Funiermaschine · Gabelhubwagen Hand · Gabelstapler · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Handwerkzeuge · Hubwagen - Elektro · Kaltkreissäge · Kehrmaschine · Kettenzug - elektrisch · Kompressoren · Koordinatenbohrmaschine · Laserschneidmaschine · Lochstanze · Messplatte · Nutenfräsmaschine - Vertikal · Nutenziehmaschine · Papierpresse · Positionierer · Profilstahlschere - Kombiniert · Punktschweißmaschine · Radialbohrmaschine · Reinigungsanlage · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Sandstrahlanlage · Scherenhubtisch · Schraubenkompressor · Schweißdrehtisch · Schweißdrehtisch - rund · Schweißroboter · Schweißtisch · Schwenkbiegemaschine · Schwerlastanhänger · Schwerlastregal · Sicken- und Bördelmaschine · Sonstige Lagertechnik · Spannfutter · Spritzgerät · Stromaggregat · Säge- und Bohranlage · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Transportwagen · Unterstellbock · Vakuum-Lifter · Wasserstrahlschneidanlage · Werkbank · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschrank ·