Bästlein Gebrauchtmaschinenhandel GmbH - Stockist for used machines
Machinelist:
Band Saw
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010260 · Band Saw
MEP - Shark 282 SXI EVO - - Neu -
Technical details
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010311 · Band Saw
MEP - Shark 332-1 SXI EVO - - Neu -
Technical details
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010628 · Band Saw
MEP - SHARK 332-1 CCS - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-10048 · Band Saw
MEP - Shark 281 CCS - - Neu -
Technical details
Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010270 · Band Saw
MEP - Shark 281 SXI EVO - - Neu -
Technical details
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010773 · Band Saw
MEP - Shark 512 SXI EVO - - Neu -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-10049 · Band Saw
MEP - Shark 282 CCS - - Neu -
Technical details
- with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010818 · Band Saw
MEP - SHARK 382-1 SXI EVO - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010971 · Band Saw
MEP - SHARK 332 NC evo - - 2007 -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010963 · Band Saw
MEP - SHARK 332 NC evo - - 2006 -
Technical details
Band Saw - Automatic
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010819 · Band Saw - Automatic
MEP - SHARK 331-1 NC SPIDER 5.0 - - Neu -
Technical details
Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010716 · Band Saw - Automatic
MEP - SHARK 332-1 NC 5.0 - - Neu -
Technical details
Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010920 · Band Saw - Automatic
MEP - SHARK 320 CNC FE - - 2001 -
Technical details
Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.
Circular Sawing Machine - Automatic
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020437 · Circular Sawing Machine - Automatic
MEP - VELOCEX 80 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020436 · Circular Sawing Machine - Automatic
MEP - VELOCEX 65 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020441 · Circular Sawing Machine - Automatic
MEP - VELOCEX 175 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020440 · Circular Sawing Machine - Automatic
MEP - VELOCEX 150 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020438 · Circular Sawing Machine - Automatic
MEP - VELOCEX 100 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020439 · Circular Sawing Machine - Automatic
MEP - VELOCEX 125 - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020444 · Circular Sawing Machine - Automatic
MEP - CONDOR 90 CNC LR - - 2003 -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020435 · Circular Sawing Machine - Automatic
MEP - TIGER 350 CNC FE - - 1999 -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020443 · Circular Sawing Machine - Automatic
MEP - Cobra 350 AX - - 1998 -
Technical details
Cold Circular Saw
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020231 · Cold Circular Saw
MEP - TIGER 352 - - Neu -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5020391 · Cold Circular Saw
MEP - TIGER 352 NC 5.0 - - Neu -
Technical details
- 1
- 2
Perfil del comerciante: Bästlein
Maquina comercial usada GmbH
Contactar con el comerciante
Maquina comercial usada GmbH
Augsburger Str. 56
89312 - Gunzburgo
Alemania
+ 49 (0) 8221 93037-0 "> + 49 (0) 8221 93037-0
+ 49 (0) 8221 93037-29
info@baestlein.com
www.baestlein.com
Perfil del comerciante
compañía
Somos una empresa comercial de maquinaria nueva y usada. En nuestra área de inventario de 3500 m², ofrecemos constantemente una amplia gama de maquinaria usada completamente revisada y probada.
En 2002 adquirimos Braendle Tool Machines Company, que ha sido sinónimo de confiabilidad y calidad durante más de 35 años en la venta de maquinaria nueva y usada.
Continuaremos esta tradición y la complementaremos con nuestra filosofía personal:
Conocimiento competente, asesoramiento y servicio amable y profesional.
¿Estás buscando un tipo específico o marca? Le enviaremos una oferta personalizada, solo envíenos su solicita.
Maquinaria usada
Baestlein ofrece una amplia gama de maquinaria usada por fabricantes conocidos en muy buenas condiciones.
Todas las máquinas son inspeccionadas y probadas por nuestro equipo de ingenieros para asegurar que las máquinas estén en buenas condiciones de funcionamiento.
Para obtener una visión general de nuestro inventario actual, simplemente seleccione Maquinaria usada a la izquierda.
Maquinaria nueva
Por supuesto también ofrecemos un inventario de maquinaria nueva. Por favor, siéntase libre de contacte Nosotros con cualquier pregunta.
También ejecutamos:
- Desmontaje completo - embarque - envio - Autorizaciones completas de la empresa. | ||
BästleinMaquina comercial usada GmbH | |
Augsburger Str. 56 | |
89312 Günzburg | |
Alemania | |
Teléfono | +49 (8221) 93037-0 |
Fax | +49 (8221) 93037-29 |
Correo | info@baestlein.com |
Augsburger Str. 56
Contact Trader
Augsburger Str. 56
89312 - Günzburg
Deutschland
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29
info@baestlein.com
www.baestlein.com
Contact person: