Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

x-travel , mm︱

---

Ironing measuring screw, measurement range: 225-250 mm Machine dealer with own stock of 1600 m².

x-travel 1500 mm︱y-travel 1000 mm︱z-travel 900 mm︱weight 1,2 kg︱dimensions 260 x 168 x 80 mm︱electric 230 volt ︱Machine manual ︱

---

Used 3-axis digital display from Mitutoyo with three scales. The digital one Measuring device was dismantled because the machine - a table boring machine - was disposed of. Display area. 0.005, 0.001mm. Hole circle display, distance processing, Conversion to lathe operation possible, programmable parameters.

size of profile - max. 150 mm︱Number of drilling agregates 1 Stk.︱bore diameter 35 mm︱quill stroke 140 mm︱spindle taper MK 4 ︱column diameter 120 mm︱throat 300 mm︱distance spindlenose - table min./max. 50 / 600 mm︱spindle turning speed range 14 / 45 - 1650 U/min︱impact length 3000 mm︱base plate 420 x 420 mm︱Max. speed ot the feeder 200 mm/sec.︱positioning accuracy auf 3 m +/- 0,2 mm︱air consumption 6 bar︱boring motor 1,5 kW︱Carrying capacity feeder 45 kg︱Control ︱weight of the machine ca. 500 kg︱dimensions of the machine ca. ca. 2,5 x 0,7 x 2 m︱Electric 400 Volt ︱

---

Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe and profile material. The machine drills automatically holes in the programmed intervals only in a fixed line. The material is clamped with a quick - tensioner (aluminium) on the feed unit. The pneum. vice fixes the workpiece during the drilling phase. The automatic drilling machine drills the hole with autom. feed, the vise solves pneumatically and the it moves to the next memory stored position, the vise clamps and the next cycle begins. The vise can also work outside the center position. Die control with alphanumeric grafic display stores 99 programs with 99 different hole intervals , 99 times repeatable. Max. feed 200 mm / sec. - Individually programmable. Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically used. The feeder is available in various lengths up to 6 m. The speed of the feed material , the drilling feed , the depth and the speed of the drill spindle can be adjusted as needed. Due to the user ceasing production, the machine became available just 1.5 years after the new purchase. We then bought the machine and put in our hall as an exhibition piece. Since then the machine has run for perhaps an hour for demonstration purposes. So overall it has barely been used. Machine dealer with own stock of 1600 m².

diameter 42 - 80 mm︱length 350 - 520 mm︱tool adaptor MK4, MK5, MK6 ︱

---

13 twist drills, also available individually: 5 pieces MK5, diameter 52/54/54/56 / 57.5 each EUR 55,-- 3 pieces MK 5 diameter 59.5 / 60/66 mm each EUR 65,-- 3 pieces MK 5 diameter 71/71/74 mm each EUR 80,-- 1 piece MK4, diameter 50 mm EUR 50,-- 1 piece MK6, diameter 80 mm EUR 150,-- plus VAT Machine dealer with own stock of 1600 m².

bore capacity in steel (diameter) 40 mm︱throat 315 mm︱bore stroke 200 mm︱taper MK 4 ︱speeds 12: 56-1120 U/min︱bore capacity in cast iron 50 mm︱table-size 700 x 450 mm︱Distance spindle/table max. 710 mm︱total power requirement 4/3,43 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. 1,14 x 0,7 x 2,58 m︱Electric 380 Volt ︱Thread cutting device ︱Croll-moving table ︱Vice BB 175 mm︱

---

Heavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm. Machine from Plank corresponds to the WMW Heckert/Saalfeld SABO Standard 40 from East German production. Machine dealer with own stock of 1600 m²

bore capacity in steel (diameter) 30 mm︱throat 210 mm︱bore stroke 110 mm︱spindle taper MT 3 ︱speeds 10 von 140-1800 U/min︱table-size 320 x 400 mm︱column diameter 100 mm︱drill diameter max. 31 mm︱Distance spindle/table max. 710 mm︱total power requirement 1 kW︱weight of the machine ca. 210 kg︱dimensions of the machine ca. 0,4 x 0,7 x 1,73 m︱Electric 380 Volt ︱

---

Column drilling machine with manual feed, speed regulation via Step discs and 2-stage motor as well as spindle right - left rotation. Machine dealer with own stock of 1600 m²

working width 250 mm︱working length 250 mm︱work height max. 280 mm︱laser capacity in Watt 400 Rofin ︱travel -z axis 10 - 1000 mm/s︱positioning accuracy +/- 0,1 mm︱repeating accuracy +/- 3,5 my︱capacity 6,8 kVA︱Required air-pressure 6-10 bar︱Type of gas Schutzgas Stickstoff 5 bar︱dimensions of the machine ca. 5,9 x 4,2 x 3 m︱range L-W-H 2,44 x 1,63 x 2,36 m︱weight 2 300 kg︱Electric 400 Volt ︱Software Concept Laser ︱Video(s) available on our website. 3 x ︱

---

Concept Laser M2 Cusing system for processing reactive and non-reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

filling capacity 300 kg︱max. workpiece height 500 x 200 x 20 mm︱workpiece weight 200 kg︱max. workpiece weight 15 kg / Stck.︱revolutions per minute 22 U/min︱filling amount 40-50 %︱Colour blau 5015 RAL︱0 625 x 270 mm︱total power requirement 1,5 kW︱weight of the machine ca. 650 kg︱range L-W-H 1 x 1,7 x 1,29 mm︱Electric 400 Volt ︱Video available on our website. ︱

---

New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

filling capacity 300 kg︱max. workpiece height 500 x 200 x 20 mm︱workpiece weight total 200 kg︱max. workpiece weight 15 kg / Stck.︱revolutions per minute 22 U/min︱filling amount 40-50 %︱Colour blau 5015 RAL︱0 624 x 270 mm︱total power requirement 1,5 kW︱weight of the machine ca. 650 kg︱Electric 400 Volt ︱Video available on our website. ︱

---

New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

filling capacity 750 kg︱max. workpiece height 900 x 300 mm︱workpiece weight total 550 kg︱max. workpiece weight 30 kg / Stck.︱revolutions per minute 22 U/min︱filling amount 50-60 %︱Colour blau 5015 RAL︱0 1175 x 440 mm︱total power requirement 3 kW︱weight of the machine ca. 1995 kg︱dimensions of the machine ca. 2,9 x 1,33 x 1,75 m︱Electric 400 Volt ︱Video available on our website. ︱

---

New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workpieces + 300 kg deburring medium = hard manganese balls pic 6 or cast iron pentagons pic 7. These are over Sideros available. Stepless speed adjustment via frequency converter approx. 13-22 rpm (2850,-- €) Soundproof housing (65/70 Db) photo 7 and Sideros ECO B2 dust extraction against Available at extra cost. For complicated workpieces, the manufacturer recommends 100 kg sample parts of the material to be deburred to the factory for testing before ordering. VIDEO on our website. Machine dealer with own stock of 1600 m².

brinell hardness 250 kg︱rockwell hardness 150 kg︱throat 125 mm︱workpiece height max. 200 mm︱weight of the machine ca. 70 kg︱dimensions of the machine ca. 400 x 200 x 700 mm︱

---

Test load: 62,5 / 100 / 150 / 187,5 / 250 kg Machine dealer with own stock of 1600 m².

filling capacity 750 kg︱max. workpiece height 900 x 300 mm︱workpiece weight total 550 kg︱max. workpiece weight 30 kg/Stck.︱revolutions per minute 22 U/min︱filling amount 50-60 %︱Colour blau 5015 RAL︱0 1175 x 440 mm︱total power requirement 3 kW︱weight of the machine ca. 1995 kg︱dimensions of the machine ca. 2,9 x 1,33 x 1,75 m︱Electric 400 Volt ︱Video available on our website. ︱

---

New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workpieces + 300 kg deburring medium = hard manganese balls Pic 6 or cast iron pentagons Pic 7. These are over Sideros available. Stepless speed adjustment via frequency converter approx. 13-22 rpm (2850,-- €) Soundproof housing (65/70 Db) photo 7 and Sideros ECO B2 dust extraction against Available at extra cost. For complicated workpieces, the manufacturer recommends 100 kg sample parts of the material to be deburred to the factory for testing before ordering. VIDEO on our website. Machine dealer with own stock of 1600 m².

diameter 85 mm︱tool adaptor SK 50 ︱bore of diameter max. 130 mm︱adjustment of the slide 40 mm︱tool tapers in the slides 20 mm︱weight ca. 3 kg︱Wooden box with accessories ︱

---

Machine dealer with own stock of 1600 m².

diameter 260 mm︱tool adaptor 40 ︱ ︱tool adaptor SK 40/M 16 ︱face and hollowing out area max. 260 mm Durchm.︱adjustment of the slide max. 48 mm︱feed 0,05 mm/U.︱tool tapers in the slides 18 mm︱max. turning speed 1000 p. Min.︱weight 2,5 kg︱

---

diameter 315 mm︱bore 89 mm︱dimensions of the machine ca. m︱

---

Wedge bar chuck with short taper DIN 55027 / Gr. 8, for 4 studs, 1 set Baking, studs not available. Machine dealer with own stock of 1600 m².

diameter 400 mm︱bore 110 mm︱tool adaptor Camlock D 1-8 ︱weight 114 kg︱

---

Machine dealer with own stock of 1600 m².

diameter 315 mm︱bore 95 mm︱tool adaptor Din 55027 Gr. 8 ︱revolutions per minute max. 1500 U/min︱

---

Machine dealer with own stock of 1600 m².

table length 800 mm︱table width 320 mm︱table load kg︱groove width 20 mm︱weight kg︱dimensions of the machine ca. 800 x 320 x 250 mm︱

---

Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

table length 1010 mm︱table width 750 mm︱table height 500 mm︱weight of the machine ca. 500 kg︱

---

Machine dealer with own stock of 1600 m².

faceplate diameter 400 mm︱bore 100 mm︱short taper Gr. 6 ︱

---

Short taper mount / Gr. 6, 4 stud bolts, jaws individually via threaded spindle adjustable. Machine dealer with own stock of 1600 m².

faceplate diameter 450 mm︱bore 120 mm︱faceplate - height 120/165 mm︱short taper Din 55022 7 Gr. 11 ︱

---

Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m².

diameter 315 - 700 mm︱bore 60 - 155 mm︱

---

Various used face plates: Face plate 7 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 9 = 550 mm, short taper Din 55027 Gr. 8 = € 510.00 Face plate 11 = 400 mm, short taper Din 55027 Gr. 6 = € 360.00 Face plate 13 = 400 mm, short taper Din 55027 Gr. 6 = € 320.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m².

diameter 400 - 550 mm︱bore 90 - 95 mm︱

---

Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m².

faceplate diameter 1200 mm︱tool adaptor DIN 55027/11 ︱bore 140 mm︱width 110 mm︱weight ca. 800 kg︱

---

Clamping disc with 6 studs. Machine dealer with own stock of 1600 m².