,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Laser Cutting Machine

          used  Laser Cutting Machine TRUMPF TruLaser L 5030 + TruFlow 5000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12298 · Laser Cutting Machine

          TRUMPF - TruLaser L 5030 + TruFlow 5000 - - 2006 - Trumpf-Sinumerik 840D

          Technical details
          table length 3000 mm︱table width 1500 mm︱burner heads 15000 W︱workpiece weight 900 kg︱max. feed 200 / simultan x+y 300 m/min︱accuracy +/- 0,10 mm︱ 25 mm︱sheet thickness for stainless steel 20 mm︱Sheet thickness aluminum 12 mm︱control Trumpf-Sinumerik 840D ︱Power connection 105 kVA︱Required air-pressure 7-10 bar︱rated capacity 33-72 kVA︱machine weight ab. 12000 kg︱dimensions of the machine ca. 11,2 x 4,6 x 2,4 m︱transport dimension 2,98 x 2,4 B X H m︱Electric 400 Volt ︱Light barrier behind ︱Light barrier in front
          Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF, Mod.TruLaser 5030 Classic with TruFlow 5000 with pallet changer. Design: The workpiece is stationary, the cutting head moves. X-axis as a gantry drive using servo motors and Y + Z axes with linear direct drives. Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON: 28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB, USB interface, hard disk space 500MB. Standard equipment: • Laser TLF 5000 • HI-LAS high pressure cutting • Cutting head quick change device • autom. Sheet metal outer edge detection • APC height control and process control • PCS Process Control System • Position laser diode • progr. Cutting gas selection / pressure setting • progr. Performance cycles • Microweld • PMS plasma sensors • SprintLas in all sheet thicknesses • ContourLas • AutoLas Plus • Laser power control • Spray device • Laser logbook function • autom. Pallet changer • autom. Nozzle cleaning • Work area lighting • Small parts/waste conveyor • Multi-chamber suction • Compact dust extractor • TFT color screen • Automatic switch-off • Safety devices • ToPs 100 lite • RJ 45 network connection • Network connection • 3.5" floppy drive Machine was regularly serviced by Trumpf. NEW Power Tube Basic (Send tube) installed in 04/2023 for € 7000 with 12 month warranty! The license of the TruTops Classic software for programming the machine on the PC can be purchased at an additional cost. Machine dealer with own stock of 1600 m².
            table length 3000 mm
            table width 1500 mm
            burner heads 1
            5000 W
            workpiece weight 900 kg
            max. feed 200 / simultan x+y 300 m/min
            accuracy +/- 0,10 mm
            25 mm
            sheet thickness for stainless st. 20 mm
            Sheet thickness aluminum 12 mm
            control Trumpf-Sinumerik 840D
            Power connection 105 kVA
            Required air-pressure 7-10 bar
            rated capacity 33-72 kVA
            machine weight ab. 12000 kg
            dimensions of the machine ca. 11,2 x 4,6 x 2,4 m
            transport dimension 2,98 x 2,4 B X H m
            Description :
            Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF,
            Mod.TruLaser 5030 Classic with TruFlow 5000 with pallet changer. Design: The
            workpiece is stationary, the cutting head moves. X-axis as a gantry drive using
            servo motors and Y + Z axes with linear direct drives.
            Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON:
            28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB,
            USB interface, hard disk space 500MB.
            Standard equipment:
            • Laser TLF 5000
            • HI-LAS high pressure cutting
            • Cutting head quick change device
            • autom. Sheet metal outer edge detection
            • APC height control and process control
            • PCS Process Control System
            • Position laser diode
            • progr. Cutting gas selection / pressure setting
            • progr. Performance cycles
            • Microweld
            • PMS plasma sensors
            • SprintLas in all sheet thicknesses
            • ContourLas
            • AutoLas Plus
            • Laser power control
            • Spray device
            • Laser logbook function
            • autom. Pallet changer
            • autom. Nozzle cleaning
            • Work area lighting
            • Small parts/waste conveyor
            • Multi-chamber suction
            • Compact dust extractor
            • TFT color screen
            • Automatic switch-off
            • Safety devices
            • ToPs 100 lite
            • RJ 45 network connection
            • Network connection
            • 3.5" floppy drive
            Machine was regularly serviced by Trumpf. NEW Power Tube Basic
            (Send tube) installed in 04/2023 for € 7000 with 12 month warranty!
            The license of the TruTops Classic software for programming the machine on the
            PC can be purchased at an additional cost.
            Machine dealer with own stock of 1600 m².

          Datasheet
          Request / Contact

          Mandrel tube bending machine

          used  Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12117 · Mandrel tube bending machine

          TRANSFLUID - DB 628 ST / SPS - - 1996 - IPU 20

          Technical details
          tube diameter 6 - 28 mm︱wall strength 2 mm︱bending radius min. 2 x D ︱Control IPU 20 ︱bending radius max. 5,0 x D mm︱bending angle max. 190 °︱arbor length 3000 mm︱operating pressure 180 bar︱hydraulic motor 4 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 3,8 x 1,1 x 1,3 m︱Electric 400 Volt ︱Bending segments 15-20-26-28 mm︱Bending mandrels 4 ︱Operation panel 0,5 x 0,6 x 1,03 m︱Double Foot pedal ︱Machine manual ︱Condition: ready for operation ︱Video available on our website.
          Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then. Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².
            tube diameter 6 - 28 mm
            wall strength 2 mm
            bending radius min. 2 x D
            Control IPU 20
            bending radius max. 5,0 x D mm
            bending angle max. 190 °
            arbor length 3000 mm
            operating pressure 180 bar
            hydraulic motor 4 kW
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
            Bending segments 15-20-26-28 mm
            Bending mandrels 4
            Operation panel 0,5 x 0,6 x 1,03 m
            Description :
            Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
            20 angles and display in the control panel for bending angle specification,
            angle detection and angle measurement via absolute value encoder, autom. tool
            plate reset, Turning device with digital display, hydr. quick chuck, aut.
            Mandrel lubrication, adjustable length stops.
            Operating modes: MANUAL and semi-automatic.
            Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
            clamp forward / backward, mandrel forward / backward, bending forward /
            backward /, locking forward / backward, mandrel lubrication, turning device
            forward / backward, plate reset, length stop forward, emergency stop.
            The machine comes from a prototype construction and was only used a little
            until 2000. After that, the machines of this department were sold. However, the
            purchaser did not use the pipe bending machine and therefore it has only stood
            in the warehouse and has not worked since then.
            Please notice that the price of a new machine today is over € 60.000,--.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Notching Machine

          used  Notching Machine SIMASV AF 204/P (Lochstanz-)


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12340 · Notching Machine

          SIMASV - AF 204/P (Lochstanz-) - - 1996 -

          Technical details
          plate thickness 4 mm︱blade length 205 mm︱table-size 700 x 825 mm︱cutting capacity stainless steel 3 mm︱throat 300 mm︱strokes 50 p. min.︱oil tank 35 l︱total power requirement 3 kW︱weight of the machine ca. 720 kg︱dimensions of the machine ca. 0,7 x 0,83 x 1,1 m︱Electric 380 Volt ︱Hole punching device ︱Foot switch ︱Support arms ︱Squaring arm withh mm-scale ︱Puch tools ( diverse ) ︱CE signed ︱Video(s) available on our website. ︱Condition: ready for operation
          Fixed angle hydraulic nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and burr-free cuts are achieved with optimal protection the knife. When using the punching head, the cutting head is raised, the punching head mounted and it can be punched with a projection of up to 300 mm and a maximum of 30 x 3 mm. The machine is practically maintenance-free and the cutting area is with shatterproof, transparent plastic. The cutting performance relates has a strength of 420 N/mm². The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
            plate thickness 4 mm
            blade length 205 mm
            table-size 700 x 825 mm
            cutting capacity stainless steel 3 mm
            throat 300 mm
            strokes 50 p. min.
            oil tank 35 l
            total power requirement 3 kW
            weight of the machine ca. 720 kg
            dimensions of the machine ca. 0,7 x 0,83 x 1,1 m
            Description :
            Fixed angle hydraulic nothing machine, more automatic cutting gap regulation
            and HOLE PUNCHING HEAD.
            The cutting head is guided stably in guide columns over the entire stroke
            length, so that an exact cut is always made. The cutting angle is negative, i.e.
            the knives cut from front to back. This means the sheet metal cannot bend
            move forward. The automatic cutting gap adjustment (patented) works
            over the lower blades (therefore no tipping of the cutting head and abrasion of
            the knife tips) and burr-free cuts are achieved with optimal protection
            the knife. When using the punching head, the cutting head is raised, the
            punching head mounted and it can be punched with a projection of up to 300 mm
            and a maximum of 30 x 3 mm.
            The machine is practically maintenance-free and the cutting area is with
            shatterproof, transparent plastic. The cutting performance relates
            has a strength of 420 N/mm².
            The machine was used in a well-kept small business for the production of
            stainless steel special parts are used for kitchens, laboratories and clinics
            and were only used by owner served.
            The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Notching Machine INDUMASCH VA-4


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12310 · Notching Machine

          INDUMASCH - VA-4 - - 1993 -

          Technical details
          plate thickness 4 mm︱blade length 200 mm︱table surface area 1000 x 780 mm︱angle adjustable from - to 30 - 140 Grad︱work height max. 910 mm︱thickness at "Niro-steel" 3 mm︱total power requirement 4 kW︱weight of the machine ca. 970 kg︱dimensions of the machine ca. 1 x 1,66 x 1,47 m︱Electric 380 Volt ︱Foot switch ︱Squaring arm 2 Stck.︱Machinelight
          Hydraulic notching machine with adjustable angle from 30° to 140°, aut. cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustment Digital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the "length reduction" option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the machine in the video. The knife holder at the top has various chips from notching, but this has no effect on the attachment of the knives. The cutting performance refers to sheets with a strength of 400 N/mm². New set of blades at the top is installed and a set of blades at the bottom is available as a replacement! Machinedealer with own stock of 1600 m².
            plate thickness 4 mm
            blade length 200 mm
            table surface area 1000 x 780 mm
            angle adjustable from - to 30 - 140 Grad
            work height max. 910 mm
            thickness at "Niro-steel" 3 mm
            total power requirement 4 kW
            weight of the machine ca. 970 kg
            dimensions of the machine ca. 1 x 1,66 x 1,47 m
            Squaring arm 2 Stck.
            Description :
            Hydraulic notching machine with adjustable angle from 30° to 140°, aut.
            cutting gap adjustment, hydr. clamping of the knives. As a rare special
            accessory, the machine has a lifting height and cutting length adjustment
            Digital display. The height adjustment works, but in the cutting length range
            it always cuts the full length of 200 mm. Since the "length reduction" option
            is almost never ordered when purchasing these machines, except for a specific
            special application, we did not have the electronic device repaired. You can
            see the function of the machine in the video. The knife holder at the top has
            various chips from notching, but this has no effect on the attachment of the
            knives.
            The cutting performance refers to sheets with a strength of 400 N/mm². New set
            of blades at the top is installed and a set of blades at the bottom is
            available as a replacement!
            Machinedealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used  Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8264-10/35


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08086 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8264-10/35 - - Fabrikneu / new -

          Technical details
          sheet width 1020 mm︱plate thickness 3,5 mm︱roll diameter 90 mm︱total power requirement 0,75 kW︱weight of the machine ca. 310 kg︱Electric 380 Volt ︱Foot switch
          Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 3,5 mm
            roll diameter 90 mm
            total power requirement 0,75 kW
            weight of the machine ca. 310 kg
            Description :
            Symmetry roll arrangement.
            This machine is in the following sizes obtainable:
            worhing length from 1020 until 2520 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 8 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8266-12/50


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08089 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8266-12/50 - - Fabrikneu / new -

          Technical details
          sheet width 1290 mm︱plate thickness 5 mm︱pre-bending ja ︱roll diameter 120 mm︱roll speed 1 - 6 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 825 kg︱
          Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².
            sheet width 1290 mm
            plate thickness 5 mm
            pre-bending ja
            roll diameter 120 mm
            roll speed 1 - 6 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 825 kg
            Description :
            Asymmetry roll arrangement, pre-bending ist possible.
            This new machine is in the following sizes obtainable:
            working length from 1040 until 2540 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm.
            We are distributor only for Germany.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8266-12/60


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08093 · Plate Bending Machine - 3 Rolls

          NOSSTEC ( LUNA ) - 8266-12/60 - - Fabrikneu / new -

          Technical details
          sheet width 1290 mm︱plate thickness 6 mm︱pre-bending ja ︱roll diameter 140 mm︱roll speed 1 - 6 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 1120 kg︱
          Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².
            sheet width 1290 mm
            plate thickness 6 mm
            pre-bending ja
            roll diameter 140 mm
            roll speed 1 - 6 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 1120 kg
            Description :
            Asymmetry roll arrangement, pre-bending ist possible.
            This new machine is in the following sizes obtainable:
            working length from 1040 until 2540 mm,
            max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm.
            We are distributor only for Germany.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FACCIN ASI/M 2,15 x 30 - Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12339 · Plate Bending Machine - 3 Rolls

          FACCIN - ASI/M 2,15 x 30 - Digi - - 1996 -

          Technical details
          sheet width 2100 mm︱plate thickness 3,5 mm︱pre-bending 2,5 mm︱roll diameter 130 mm︱roll speed 4 m/min︱total power requirement 3,8 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 2,9 x 0,62 x 1,1 m︱Electric 380 Volt ︱Induction hardened rollers fuer VA ︱Profile bending device ︱Digital readout ︱Emergency wire switch ︱Foot switch 4 Funktionen ︱CE signed ︱Condition: ready for operation ︱Video(s) available on our website.
          Motorized three-roll bending machine with an asymmetrical roll arrangement. - Special version with 2100 mm roller length - Both central rollers driven - per bend - Top roller can be swung out - Inductively hardened rollers for VA processing, roller surfaces top! - Side rollers on roller bearings - extended rollers for profile bending rings - Digital display for the rear roller infeed - Safety control with immediate stop of all machine movements. Faccin is a renowned manufacturer of quality machines. The machine was used in a well-kept small business for the production of stainless steel special parts are used for kitchens, laboratories and clinics and were only used by Owner served. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m
            sheet width 2100 mm
            plate thickness 3,5 mm
            pre-bending 2,5 mm
            roll diameter 130 mm
            roll speed 4 m/min
            total power requirement 3,8 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 2,9 x 0,62 x 1,1 m
            Induction hardened rollers fuer VA
            Foot switch 4 Funktionen
            Description :
            Motorized three-roll bending machine with an asymmetrical roll arrangement.
            - Special version with 2100 mm roller length
            - Both central rollers driven
            - per bend
            - Top roller can be swung out
            - Inductively hardened rollers for VA processing, roller surfaces top!
            - Side rollers on roller bearings
            - extended rollers for profile bending rings
            - Digital display for the rear roller infeed
            - Safety control with immediate stop of all machine movements.
            Faccin is a renowned manufacturer of quality machines.
            The machine was used in a well-kept small business for the production of
            stainless steel special parts are used for kitchens, laboratories and clinics
            and were only used by Owner served.
            The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls FASTI 102/RM Gr. 1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12341 · Plate Bending Machine - 3 Rolls

          FASTI - 102/RM Gr. 1 - - -

          Technical details
          sheet width 1020 mm︱plate thickness 1,25 mm︱pre-bending 1 mm︱roll diameter 55 mm︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 1,5 x 0,5 m︱
          Manual plate bending machine with asymmetrical roller arrangement, rollers made of material 70 kg/mm² strength, adjustment of the lower rollers with eccentric infeed, rear roller with handwheel infinitely adjustable via worm gear, rear roller inclination for conical rounds, folding groove at the top and wire insert grooves at the bottom. Machine dealer with own stock of 1600 m².
            sheet width 1020 mm
            plate thickness 1,25 mm
            pre-bending 1 mm
            roll diameter 55 mm
            weight of the machine ca. 180 kg
            dimensions of the machine ca. 1,5 x 0,5 m
            Description :
            Manual plate bending machine with asymmetrical roller arrangement, rollers made
            of material 70 kg/mm² strength, adjustment of the lower rollers with eccentric
            infeed, rear roller with handwheel infinitely adjustable via worm gear, rear
            roller inclination for conical rounds, folding groove at the top and wire
            insert grooves at the bottom.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls unbekannt/unknown RM 110


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12322 · Plate Bending Machine - 3 Rolls

          unbekannt/unknown - RM 110 - - -

          Technical details
          sheet width 1620 mm︱plate thickness 3 (4) mm︱pre-bending nein/no ︱roll diam. toproll 110 mm︱roll diam. bottom roll 100 mm︱plate thickness großer DM = 4 mm︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 2,2 x 0,7 x 1,2 m︱
          Manual 3-roller round bending machine in a symmetrical roller arrangement, with 2 adjustment spindles on the right and left for the top roller, hand crank for right and left movement of the rollers, foldable roller bearing for removing the tubes. The sheet thickness refers to 380 N/mm² strength. The bending performance could also go up to 4 mm because the top roller has a diameter of 110 mm. Machine dealer with own stock of 1600 m²
            sheet width 1620 mm
            plate thickness 3 (4) mm
            pre-bending nein/no
            roll diam. toproll 110 mm
            roll diam. bottom roll 100 mm
            plate thickness großer DM = 4 mm
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 2,2 x 0,7 x 1,2 m
            Description :
            Manual 3-roller round bending machine in a symmetrical roller arrangement, with
            2 adjustment spindles on the right and left for the top roller, hand crank for
            right and left movement of the rollers, foldable roller bearing for removing
            the tubes.
            The sheet thickness refers to 380 N/mm² strength. The bending performance could
            also go up to 4 mm because the top roller has a diameter of 110 mm.
            Machine dealer with own stock of 1600 m²
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls RAS 41.20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12336 · Plate Bending Machine - 3 Rolls

          RAS - 41.20 - - -

          Technical details
          sheet width 1250 mm︱plate thickness 1 mm︱pre-bending - ︱shaft diameter 56 mm︱weight of the machine ca. 170 kg︱dimensions of the machine ca. 1,5 x 0,55 x 1 m︱
          Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m².
            sheet width 1250 mm
            plate thickness 1 mm
            pre-bending -
            shaft diameter 56 mm
            weight of the machine ca. 170 kg
            dimensions of the machine ca. 1,5 x 0,55 x 1 m
            Description :
            Manual 3-roller round bending machine with asymmetrical roller arrangement
            operated with hand crank via wheel transmission, upper roller can be swung out,
            lower rollers with annular groove, rear shaft adjustable for conical bending,
            front shaft adjusted via eccentric lever, rear roller adjusted via adjusting
            lever, rollers crowned.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Bending Machine - 3 Rolls RAS 40.91 fuer Falzrohre


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12329 · Plate Bending Machine - 3 Rolls

          RAS - 40.91 fuer Falzrohre - - -

          Technical details
          sheet width 1500 mm︱plate thickness 1,25 mm︱pre-bending - ︱total power requirement 0,75 kW︱weight of the machine ca. 460 kg︱dimensions of the machine ca. 2 x 0,6 x 1 m︱Electric 380 Volt ︱Foot switch
          Special round bending machine for air duct construction for rounding profiled sheets with folds such as corner folds, snap folds and standing folds (max height 13 mm). It is possible to round the inner and outer casings of the duct bends and air baffles that are folded on both sides. The previously required filling sheets for the different types of folds are no longer necessary. It's all three reels driven by a geared motor with re- and li-running using a foot switch. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 1500 mm
            plate thickness 1,25 mm
            pre-bending -
            total power requirement 0,75 kW
            weight of the machine ca. 460 kg
            dimensions of the machine ca. 2 x 0,6 x 1 m
            Description :
            Special round bending machine for air duct construction for rounding profiled
            sheets with folds such as corner folds, snap folds and standing folds (max
            height 13 mm). It is possible to round the inner and outer casings of the duct
            bends and air baffles that are folded on both sides. The previously required
            filling sheets for
            the different types of folds are no longer necessary. It's all three reels
            driven by a geared motor with re- and li-running using a foot switch.
            The bending performance refers to 400 N/mm² strength.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic OMAG ES 36


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12338 · Plate Shear - Hydraulic

          OMAG - ES 36 - - 1996 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3200 mm︱cutting angle adjustment 30´- 2"30´ °︱strokes 25-8 p. min.︱back stop way ca. 600 mm︱throat - mm︱total power requirement 5,5 kW︱weight of the machine ca. 3,3 t︱dimensions of the machine ca. 3,5 x 1,6 x 1,45 m︱Electric 380 Volt ︱Back gauge electric with counter in front 2 Geschwindigkeiten ︱Foot switch ︱Protective railing + photoelectric barrier ︱Pair of blades for change ︱Shadow line lighting ︱cutting angle adjustment ︱Squaring arm withh mm-scale 1300 mm︱Support arms 3 x 1300 mm︱Condition: ready for operation
          Hydraulic plate shears with cutting angle adjustment and back gauge with 2 speeds. Higher quality knives for stainless steel processing. The cutting performance refers to 380 N/mm² strength. The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. The machine is sold because the owners have reached retirement age. Machine dealer with own stock of 1600 m².
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3200 mm
            cutting angle adjustment 30´- 2"30´ °
            strokes 25-8 p. min.
            back stop way ca. 600 mm
            throat - mm
            total power requirement 5,5 kW
            weight of the machine ca. 3,3 t
            dimensions of the machine ca. 3,5 x 1,6 x 1,45 m
            Back gauge electric with counter. 2 Geschwindigkeiten
            Squaring arm withh mm-scale 1300 mm
            Support arms 3 x 1300 mm
            Description :
            Hydraulic plate shears with cutting angle adjustment and back gauge with 2
            speeds. Higher quality knives for stainless steel processing.
            The cutting performance refers to 380 N/mm² strength.
            The machine was used in a well-kept small business to produce special stainless
            steel parts for kitchens, laboratories and clinics and was only operated by the
            owner. The machine is sold because the owners have reached retirement age.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic ECLAIR / PASKOWSKY-Schweiz ASS. 5 mm


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12315 · Plate Shear - Hydraulic

          ECLAIR / PASKOWSKY-Schweiz - ASS. 5 mm - - 1976 -

          Technical details
          sheet width 3050 mm︱plate thickness 5 mm︱distance between columns - mm︱table height 750 mm︱strokes per minute until 25 - 80 ︱cutting angle 1° 10´ ︱Number of downholders 16 ︱total power requirement 11 kW︱weight of the machine ca. 4,9 t︱dimensions of the machine ca. 3,4 x 2,6 x 1,4 m︱Electric 380 Volt ︱Back gauge motorized 750 mm︱Squaring arm withh mm-scale 1200 mm︱Support arms 2 x / 1200 mm︱Shadow line lighting ︱Cutting lenght bound ︱Foot switch ︱Condition: ready for operation ︱Video(s) available on our website.
          Hydraulic guillotine shear in a solid all-welded construction with cutting output of 3050 x 5 mm and motorized backgauge adjustable from the front and readable via counter. The cutting performance refers to sheets with a strength of max. 45 kg/mm². Machine dealer with own stock of 1600 m².
            sheet width 3050 mm
            plate thickness 5 mm
            distance between columns - mm
            table height 750 mm
            strokes per minute until 25 - 80
            cutting angle 1° 10´
            Number of downholders 16
            total power requirement 11 kW
            weight of the machine ca. 4,9 t
            dimensions of the machine ca. 3,4 x 2,6 x 1,4 m
            Back gauge motorized 750 mm
            Squaring arm withh mm-scale 1200 mm
            Support arms 2 x / 1200 mm
            Description :
            Hydraulic guillotine shear in a solid all-welded construction with cutting
            output of 3050 x 5 mm and motorized backgauge adjustable from the front and
            readable via counter. The cutting performance refers to sheets with a strength
            of max. 45 kg/mm².
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Plate Shear - Mechanical

          used  Plate Shear - Mechanical KAPEMA SMP 20-20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08037 · Plate Shear - Mechanical

          KAPEMA - SMP 20-20 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 2 mm
            strokes per minute until 38
            cutting angle 1,75 °
            table height over floor 870 mm
            total power requirement 3 kW
            weight of the machine ca. 1520 kg
            range L-W-H 2,2 x 0,6 x 1,2 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Shear - Mechanical KAPEMA SMP 12-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08408 · Plate Shear - Mechanical

          KAPEMA - SMP 12-30 - - Fabrikneu / new -

          Technical details
          sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms
          The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².
            sheet width 1275 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 3 kW
            weight of the machine ca. 875 kg
            range L-W-H 1,7 x 1,68 x 1,1 m
            Description :
            The guillotine shears type SMP is a well-dimensioned machine with
            all-welded gate guides. The drive takes place with a standard geared brake
            motor via a chain connection to the main axis. The knives are of the highest
            quality. The optimal cutting angle ensures together with the rubber-coated
            sheet metal holder, perfect cuts.
            Bearings and guides are maintenance-free and lubrication-free.
            Standard equipment: • Back gauge 635 with mm scale. •
            Cutting line lighting. • Section counter. • Table extensions 600 mm. •
            Right-angled stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            rear photocell.
            Pre-freight to our stock + packaging 270, -.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Shear - Mechanical KAPEMA SMP 20-30


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08417 · Plate Shear - Mechanical

          KAPEMA - SMP 20-30 - - Fabrikneu / new -

          Technical details
          sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt
          The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².
            sheet width 2050 mm
            plate thickness 3 mm
            strokes per minute until 35
            cutting angle 2,0 °
            table height over floor 870 mm
            thickness at "Niro-steel" 2 mm
            total power requirement 4 kW
            weight of the machine ca. 1550 kg
            range L-W-H 2,5 x 1,57 x 1,21 m
            Description :
            The new motor guillotine type SMP is a well dimensioned machine with
            all-welded link guides. The drive takes place with a
            Standard geared brake motor via a chain connection to the main axle. the
            Knives are of the highest quality. The optimal cutting angle secures the
            Together with the rubber-covered blank holder perfect cuts.
            Bearings and guides are maintenance and lubrication-free.
            Standard equipment: • Back gauge 665 with mm scale. •
            cutting edge lighting. • Section counter. • Table extensions 600 mm. •
            Right angle stop, left. • Movable 24 V foot switch with emergency stop.
            • Motor protection switch and emergency stop. • 2 cutting edges per knife. •
            Rear protective grille, warranty = 12 months for single-shift operation.
            Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Plate Shear - Mechanical RAS 82.25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12333 · Plate Shear - Mechanical

          RAS - 82.25 - - -

          Technical details
          sheet width 2540 mm︱plate thickness 2 mm︱strokes per minute until 63 ︱throat 100 mm︱cutting angle 1,13 °︱table height 750 mm︱table width 320 mm︱table height over floor 750 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 3,1 x 2 x 1,3 m︱Electric 380 Volt ︱Rear register front operated 15 - 550 ︱Foot switch ︱Squaring arm ︱Support arms 3 x ︱Rear sheet tray
          Motorized guillotine shears in the swing cutting system with adjustable from the front manual backgauge with analogue display and reading optics. Power transmission via gearbox, eccentric shaft and connecting rod on the cutter bar. Less noise level because the gear is only switched on during the cutting process is. Hold-down beam with continuous pressure element made of elastomers material that ensures secure clamping of the sheet metal. The cutting performance refers to 400 N/mm² strength. The machine was used in air duct construction and only cut sheets of 1 mm. Machine dealer with own stock of 1600 m².
            sheet width 2540 mm
            plate thickness 2 mm
            strokes per minute until 63
            throat 100 mm
            cutting angle 1,13 °
            table height 750 mm
            table width 320 mm
            table height over floor 750 mm
            total power requirement 3 kW
            weight of the machine ca. 1600 kg
            dimensions of the machine ca. 3,1 x 2 x 1,3 m
            Rear register front operated 15 - 550
            Support arms 3 x
            Description :
            Motorized guillotine shears in the swing cutting system with adjustable from
            the front manual backgauge with analogue display and reading optics. Power
            transmission via gearbox, eccentric shaft and connecting rod on the cutter bar.
            Less noise level because the gear is only switched on during the cutting process
            is. Hold-down beam with continuous pressure element made of elastomers
            material that ensures secure clamping of the sheet metal.
            The cutting performance refers to 400 N/mm² strength.
            The machine was used in air duct construction and only cut sheets of 1 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Roll forming Lines

          used  Roll forming Lines Vermtl. Kabbert 2500 / Z-Profilier


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12325 · Roll forming Lines

          Vermtl. Kabbert - 2500 / Z-Profilier - - -

          Technical details
          sheet width 2500 mm︱plate thickness 1 mm︱stations 15 ︱profile width 160 mm︱total power requirement 0,75 kW︱dimensions of the machine ca. 2,66 x 1,35 x 1,15 m︱Electric 380 Volt ︱Support arms beidseitig 530/800 mm︱Video available on our website. ︱Machine still in the delivery factory
          Machine for Z-shaped profiling of sheets for ventilation duct construction. The bending performance refers to sheets with a strength of 400 N/mm². Footswitch not activated. The bending performance refers to 380 N/mm² strength. Machine dealer with own stock of 1600 m².
            sheet width 2500 mm
            plate thickness 1 mm
            stations 15
            profile width 160 mm
            total power requirement 0,75 kW
            dimensions of the machine ca. 2,66 x 1,35 x 1,15 m
            Support arms beidseitig 530/800 mm
            Description :
            Machine for Z-shaped profiling of sheets for ventilation duct construction. The
            bending performance refers to sheets with a strength of 400 N/mm². Footswitch
            not activated. The bending performance refers to 380 N/mm² strength.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Section Bender

          used  Section Bender HAEUSLER HPR 12 mech. asym. - V+H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11966 · Section Bender

          HAEUSLER - HPR 12 mech. asym. - V+H - - 1976 -

          Technical details
          I-beam section - flat steel 220 bei Dm 1200 mm︱I-beam section - upend - mm︱angular steel - leg outwards 110x110x14 bei Dm 1000 mm︱angular steel - leg inwards 80x80x10 bei Dm 1000 mm︱flat steel flat 100 x 20 bei Dm 1000 mm︱T-steel / side out 120x120x13 bei Dm 1200 mm︱U-iron on the x-axis 22 bei Dm 1200 mm︱pipes 102 x 6 bei Dm 900 mm︱round material 75 bei Dm 700 mm︱square material 60 x 60 bei Dm 600 mm︱bending speed 3,5 m/min︱No. - Rolls 3 ︱Drive 7,5 kW︱shaft diameter 125/135 mm︱weight 6,4 t︱dimensions of the machine ca. 2,1 x 2,4 x 1,5 m︱Electric 380 Volt ︱Set of standard rolls I + H ︱Motorized adjustable rollers ︱Control panel
          Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers, pneum. regulation of the clutch pressure of the setting rollers, usable horizontal and vertical, optical read out. Machine dealer with own stock of 1600 m².
            I-beam section - flat steel 220 bei Dm 1200 mm
            I-beam section - upend - mm
            angular steel - leg outwards 110x110x14 bei Dm 1000 mm
            angular steel - leg inwards 80x80x10 bei Dm 1000 mm
            flat steel flat 100 x 20 bei Dm 1000 mm
            T-steel / side out 120x120x13 bei Dm 1200 mm
            U-iron on the x-axis 22 bei Dm 1200 mm
            pipes 102 x 6 bei Dm 900 mm
            round material 75 bei Dm 700 mm
            square material 60 x 60 bei Dm 600 mm
            bending speed 3,5 m/min
            No. - Rolls 3
            Drive 7,5 kW
            shaft diameter 125/135 mm
            weight 6,4 t
            dimensions of the machine ca. 2,1 x 2,4 x 1,5 m
            Set of standard rolls I + H
            Description :
            Heavy ASYMETRIC ring bending machine with mot. adjustment of both
            infeed rollers and mot. adjustment of the two lateral guide rollers, pneum.
            regulation of the clutch pressure of the setting rollers, usable horizontal and
            vertical, optical read out.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Universal lockforming machine

          used  Universal lockforming machine LOCKFORMER 16


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12344 · Universal lockforming machine

          LOCKFORMER - 16 - - -

          Technical details
          sheet thickness - max. 1,5 mm︱Roller stands 7 ︱Profile height max. - mm︱speed 15 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 260 kg︱dimensions of the machine ca. 1,5 x 0,6 x 1,15 m︱Electric 380 Volt
          Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owner's illness and retirement. Machine dealer with own stock of 1600 m².
            sheet thickness - max. 1,5 mm
            Roller stands 7
            Profile height max. - mm
            speed 15 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 260 kg
            dimensions of the machine ca. 1,5 x 0,6 x 1,15 m
            Description :
            Forming head made of two divided all-steel side links between which the shafts
            run in needle bearings on both sides. The head is mounted on an all-steel
            housing in which the drive motor is housed. Machine rollable. The set of
            rollers is probably standing seam, but on the other hand we cannot describe the
            profile rollers. The buyer must obtain the appropriate roller set.
            Selling due to owner's illness and retirement.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Universal lockforming machine LOCKFORMER 16


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12352 · Universal lockforming machine

          LOCKFORMER - 16 - - -

          Technical details
          sheet thickness - max. 1,5 mm︱Roller stands 7 ︱Profile height max. - mm︱speed 15 m/min︱total power requirement 2,2 kW︱weight of the machine ca. 260 kg︱dimensions of the machine ca. 1,5 x 0,6 x 1,15 m︱Electric 380 Volt
          Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owner's illness and retirement. Machine dealer with own stock of 1600 m².
            sheet thickness - max. 1,5 mm
            Roller stands 7
            Profile height max. - mm
            speed 15 m/min
            total power requirement 2,2 kW
            weight of the machine ca. 260 kg
            dimensions of the machine ca. 1,5 x 0,6 x 1,15 m
            Description :
            Forming head made of two divided all-steel side links between which the shafts
            run in needle bearings on both sides. The head is mounted on an all-steel
            housing in which the drive motor is housed. Machine rollable. The set of
            rollers is probably standing seam, but on the other hand we cannot describe the
            profile rollers. The buyer must obtain the appropriate roller set.
            Selling due to owner's illness and retirement.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Flame-Cutting Machine

          used  Flame-Cutting Machine ESAB eVent 2000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12335 · Flame-Cutting Machine

          ESAB - eVent 2000 - - 2007 - Vision 51

          Technical details
          table width 1500 mm︱table length 3000 mm︱burner heads 1 ︱working width 1500 x 3000 mm︱control Vision 51 ︱material thickness 8 mm︱feed 20 m/min︱table height 800 mm︱capacity 2 kVA︱gangway length 4000 mm︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,45 x 7,2 m︱electric 230 + 400 V ︱Condition: Not more under power ︱Video available on our website ︱CE signed
          CNC flatbed gantry flame cutting machine with path control. Machine was in Air technology is only used for max. 1.5 mm sheets. Plasma power source Hypertherm Powermax 1000. Assembly, assembly and programming instructions available. Selling due to owner's illness and retirement. Machine dealer with own stock of 1600 m².
            table width 1500 mm
            table length 3000 mm
            burner heads 1
            working width 1500 x 3000 mm
            control Vision 51
            material thickness 8 mm
            feed 20 m/min
            table height 800 mm
            capacity 2 kVA
            gangway length 4000 mm
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 2,45 x 7,2 m
            Description :
            CNC flatbed gantry flame cutting machine with path control. Machine was in
            Air technology is only used for max. 1.5 mm sheets.
            Plasma power source Hypertherm Powermax 1000. Assembly, assembly and
            programming instructions available.
            Selling due to owner's illness and retirement.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Rotary Table

          used  Rotary Table SIDEROS Rotolift RL 1250 OL


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08209 · Rotary Table

          SIDEROS - Rotolift RL 1250 OL - - Fabrikneu / new -

          Technical details
          weight max. in kg 1250 kg︱Working height minimal 540 mm︱Working height maximum 1120 mm︱table diameter 800 mm︱swivelling range --> 95 Grad︱max. torque 490 Nm︱table rotation speed 2 U/min︱Working height from to 540 - 1120 vertikal mm︱Working height from to 700 - 1280 horiz. mm︱total power requirement 2,53 kW︱weight of the machine ca. 757 kg︱dimensions of the machine ca. 1,76 x 1,63 m︱Video available on our website. ︱Video available on our website.
          Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².
            weight max. in kg 1250 kg
            Working height minimal 540 mm
            Working height maximum 1120 mm
            table diameter 800 mm
            swivelling range --> 95 Grad
            max. torque 490 Nm
            table rotation speed 2 U/min
            Working height from t. 540 - 1120 vertikal mm
            Working height from t. 700 - 1280 horiz. mm
            total power requirement 2,53 kW
            weight of the machine ca. 757 kg
            dimensions of the machine ca. 1,76 x 1,63 m
            Description :
            Hydraulic positioner for permanent turning right + left, tilting,
            Raise and lower.
            Various sizes from 1250 - 18000 kg load capacity in the production program.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspannplatte · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräszentrum · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidemaschine · Bördelmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Falzformer · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Furnierpresse · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mechanikerdrehbank · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Portal - Bearbeitungszentrum · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Punktschweißmaschine · Querteilanlage mit Schwenkschere · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleif - Bürstanlage · Schleifmaschinenzubehör · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tellerschleifmaschine · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·