,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Drilling line

          used  Drilling line APOLLO Bimak 35 speedy 3000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11919 · Drilling line

          APOLLO - Bimak 35 speedy 3000 - - 2014 -

          Technical details
          size of profile - max. 150 mm︱Number of drilling agregates 1 Stk.︱bore diameter 35 mm︱quill stroke 140 mm︱spindle taper MK 4 ︱column diameter 120 mm︱throat 300 mm︱distance spindlenose - table min./max. 50 / 600 mm︱spindle turning speed range 14 / 45 - 1650 U/min︱impact length 3000 mm︱base plate 420 x 420 mm︱Max. speed ot the feeder 200 mm/sec.︱positioning accuracy auf 3 m +/- 0,2 mm︱air consumption 6 bar︱boring motor 1,5 kW︱Carrying capacity feeder 45 kg︱Control ︱weight of the machine ca. 500 kg︱dimensions of the machine ca. ca. 2,5 x 0,7 x 2 m︱Electric 400 Volt
          Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe and profile material. The machine drills automatically holes in the programmed intervals only in a fixed line. The material is clamped with a quick - tensioner (aluminium) on the feed unit. The pneum. vice fixes the workpiece during the drilling phase. The automatic drilling machine drills the hole with autom. feed, the vise solves pneumatically and the it moves to the next memory stored position, the vise clamps and the next cycle begins. The vise can also work outside the center position. Die control with alphanumeric grafic display stores 99 programs with 99 different hole intervals , 99 times repeatable. Max. feed 200 mm / sec. - Individually programmable. Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically used. The feeder is available in various lengths up to 6 m. The speed of the feed material , the drilling feed , the depth and the speed of the drill spindle can be adjusted as needed. Due to the user ceasing production, the machine became available just 1.5 years after the new purchase. We then bought the machine and put in our hall as an exhibition piece. Since then the machine has run for perhaps an hour for demonstration purposes. So overall it has barely been used. Machine dealer with own stock of 1600 m².
            size of profile - max. 150 mm
            Number of drilling agregates 1 Stk.
            bore diameter 35 mm
            quill stroke 140 mm
            spindle taper MK 4
            column diameter 120 mm
            throat 300 mm
            distance spindlenose - table min. 50 / 600 mm
            spindle turning speed range 14 / 45 - 1650 U/min
            impact length 3000 mm
            base plate 420 x 420 mm
            Max. speed ot the feeder 200 mm/sec.
            positioning accuracy auf 3 m +/- 0,2 mm
            air consumption 6 bar
            boring motor 1,5 kW
            Carrying capacity feeder 45 kg
            weight of the machine ca. 500 kg
            dimensions of the machine ca. ca. 2,5 x 0,7 x 2 m
            Description :
            Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel
            feeds in conjunction with the automatic speedy feed system suitable for pipe and
            profile material.
            The machine drills automatically holes in the programmed intervals only in a
            fixed line. The material is clamped with a quick - tensioner (aluminium) on
            the feed unit. The pneum. vice fixes the workpiece during the drilling phase.
            The automatic drilling machine drills the hole with autom. feed, the vise solves
            pneumatically and the it moves to the next memory stored position, the
            vise clamps and the next cycle begins. The vise can also work outside the
            center position. Die control with alphanumeric grafic display
            stores 99 programs with 99 different hole intervals , 99 times repeatable.
            Max. feed 200 mm / sec. - Individually programmable.
            Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically
            used. The feeder is available in various lengths up to 6 m. The speed of the
            feed material , the drilling feed , the depth and the speed of the drill
            spindle can be adjusted as needed.
            Due to the user ceasing production, the machine became available just 1.5 years
            after the new purchase. We then bought the machine and put in our hall as an
            exhibition piece. Since then the machine has run for perhaps an hour for
            demonstration purposes. So overall it has barely been used.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Perfil del comerciante: Plum & Partner Werkzeugmaschinen GmbH

          Contactar con el comerciante



            Plum & Partner Werkzeugmaschinen GmbH
           Carretera angular 32
            32257 - Bunde
            Alemania
            + 49 05223 574444 "> + 49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Perfil del comerciante




          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspannplatte · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräszentrum · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidemaschine · Bördelmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Falzformer · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Furnierpresse · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mechanikerdrehbank · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Portal - Bearbeitungszentrum · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Punktschweißmaschine · Querteilanlage mit Schwenkschere · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleif - Bürstanlage · Schleifmaschinenzubehör · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tellerschleifmaschine · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·