Frech GmbH - Stockist for used machines
Machinelist:
Folding Machine
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-76548 · Folding Machine
EHT - MULTISWING 4-32 - - 1998 -
Technical details
** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge
Hydr. pressbrake
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-96942 · Hydr. pressbrake
EHT - VARIOPRESS 125-30 - - 1999/2017 Retrofit -
Technical details
• Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-96941 · Hydr. pressbrake
EHT - VARIOPRESS 125-3550 - - 1998 -
Technical details
• Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-96820 · Hydr. pressbrake
EHT - EHPS 15-3550+H500 - - 1989 -
Technical details
** from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-96909 · Hydr. pressbrake
EHT - EHPS 20-30 - - 1986 - DNC 60
Technical details
Furnishing: - electro-hydraulic CNC press brake * last press test - carried out in 2022 - CYBELEC CNC control - model DNC 60 HP (conversion 2012) - Swivel operation, mounting side at the front right - electric back gauge, with ball screws (X axis) - electric-pneumatic height adjustment from the back gauge (R axis) - manual die shifting, including die shoe - electro-hydraulic upper tool clamping - electro-pneumatic lower tool clamping - EHT - split upper tools - EHT - split sub tools - 1x freely movable 2-hand foot control - manual central lubrication - Protective grille on the side + back - Operating instructions control + circuit diagrams machine
Plate Shear - Hydraulic
- Frech GmbH
- Werderstr. 82
- 74889 Sinsheim
- Deutschland
-
0049-7261-1011
0049-7261-63966 -
info@frech-maschinen.de
www.frech-maschinen.de
#1073-94137 · Plate Shear - Hydraulic
EHT - MULTICUT 10-30 - - 2003 -
Technical details
** maintained condition (!!) ** was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) - 1x freely movable foot switch - original operating instructions **Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale
Perfil del comerciante: Frech GmbH
Contactar con el comerciante
Werderstr. 82
74889 - Sinsheim
Alemania
0049-7261-1011">0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de
Perfil del comerciante
Karl Frech, fundada en 1945 por Karl Frech y teniendo a la Sra. Nicole Frech como su gerente de generación de 3rd, puede recordar los años de tradición comercial de 60 en la ciudad de Sinsheim, cerca de Heidelberg, en la región alemana de Baden.
Sinsheim se encuentra en la autopista A6, a una distancia de una hora en automóvil desde los aeropuertos de Frankfurt / Main y Stuttgart. FRECH GmbH está especializada en el tratamiento de equipos usados (desbobinadores, rebobinadores, niveladores de rodillos, líneas de bobinas, líneas de perfilado, líneas de corte longitudinal, líneas de laminado en frío, laminadores en frío y amoladoras de rodillos).
Además, el equipo de FRECH actúa como agente en los siguientes campos de la maquinaria usada: bobinas, plegadoras, rectificadoras, prensas de frenos, prensas, bobinadoras de chatarra y cizallas. Contáctenos por favor !!! - Te ayudaremos también en otras áreas. En un área de aproximadamente 1000 metros cuadrados de salas y espacios de venta minorista, exhibimos una gama de maquinaria de segunda mano que varía constantemente y están en buenas condiciones de funcionamiento y, en su mayor parte, aptas para la demostración.
¿Por qué maquinaria de segunda mano?
La mayoría de las máquinas de segunda mano están disponibles de inmediato y están listas para funcionar. Frech es su primera dirección cuando desea reducir sus costos de capital y aumentar la eficiencia económica de su maquinaria.
Comprar y vender maquinaria de segunda mano es una cuestión de confianza. Frech es su mejor contacto.
Werderstr. 82
Contact Trader
Werderstr. 82
74889 - Sinsheim
Deutschland
0049-7261-1011
0049-7261-63966
info@frech-maschinen.de
www.frech-maschinen.de
Contact person: