,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Amann Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Automatic Punching Press

          used  Automatic Punching Press BOSCHERT KST 25-500


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92333 · Automatic Punching Press

          BOSCHERT - KST 25-500 - - 1992 -

          Technical details
          pressure 25 t︱no. of strokes 40-160 Hub/min︱sheet width mm︱punch diameter 105 mm︱plate thickness 10 mm︱Stroke length 0-25 mm︱total power requirement 4 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 2,5x1,5x1,5 m︱
          Tool holders for die and punch, control panel with foot switch, support table.
            pressure 25 t
            no. of strokes 40-160 Hub/min
            punch diameter 105 mm
            plate thickness 10 mm
            Stroke length 0-25 mm
            total power requirement 4 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 2,5x1,5x1,5 m
            Description :
            Tool holders for die and punch,
            control panel with foot switch,
            support table.
          Datasheet
          Request / Contact

          Folding Machine

          used  Folding Machine SCHRÖDER MAK V 2000/2,0


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92331 · Folding Machine

          SCHRÖDER - MAK V 2000/2,0 - - 2015 - nano Touch

          Technical details
          sheet width 2000 mm︱plate thickness 2 mm︱distance between columns 2080 mm︱Control nano Touch ︱total power requirement 4 kVA︱weight of the machine ca. 1,7 t︱dimensions of the machine ca. 3,1 x 1,5 x 1,7 m︱
          Inclined upper beam 45° with 2-part quick tool clamp Pre-switch off upper beam 15 mm Manual bending beam adjustment 25mm 2-way foot switch manual back gauge 750mm / 7 spring-loaded gauge fingers sharp nose blade 20°/ one-piece 2020mm long lower tool slim 10mm / one-piece 2020mm long lower tool thick 25mm / one-piece 2020mm long Goat's foot blade height 80mm / 2060mm total. length / segmented: Corner piece left 75 - corner piece right 75 30-50-55-60-65-70-75-100-200-200-500-500mm shims Crane suspension hooks are in the control cabinet
            sheet width 2000 mm
            plate thickness 2 mm
            distance between columns 2080 mm
            Control nano Touch
            total power requirement 4 kVA
            weight of the machine ca. 1,7 t
            dimensions of the machine ca. 3,1 x 1,5 x 1,7 m
            Description :
            Inclined upper beam 45° with 2-part quick tool clamp
            Pre-switch off upper beam 15 mm
            Manual bending beam adjustment 25mm
            2-way foot switch
            manual back gauge 750mm / 7 spring-loaded gauge fingers
            sharp nose blade 20°/ one-piece 2020mm long
            lower tool slim 10mm / one-piece 2020mm long
            lower tool thick 25mm / one-piece 2020mm long
            Goat's foot blade height 80mm / 2060mm total. length / segmented:
            Corner piece left 75 - corner piece right 75
            30-50-55-60-65-70-75-100-200-200-500-500mm
            shims
            Crane suspension hooks are in the control cabinet
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used  Hydr. pressbrake DENER DD-M 10030


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92108 · Hydr. pressbrake

          DENER - DD-M 10030 - - 2019 - Delem DA 66T

          Technical details
          pressure 100 t︱chamfer lenght 3050 mm︱distance between columns 3250 mm︱Control Delem DA 66T ︱stroke y-axis 300 mm︱dayligth 590 mm︱ajustment speed 75 mm/sec︱Bending Speed 20 mm/sec.︱backward speed 75 mm/s︱total power requirement 11 kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 4,3x2,0x2,9 m︱
          *** Demonstration machine *** Y1 / Y2 servo electronic Hydraulic stamp clamping (WILA Premium) Hydraulic die clamping (WILA Premium) including motorized crowning Back gauge system "DENER" X-; R-; Z1-; Z2- axis FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending Rolleri quick-change tools segmented: Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length
            pressure 100 t
            chamfer lenght 3050 mm
            distance between columns 3250 mm
            Control Delem DA 66T
            stroke y-axis 300 mm
            dayligth 590 mm
            ajustment speed 75 mm/sec
            Bending Speed 20 mm/sec.
            backward speed 75 mm/s
            total power requirement 11 kW
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 4,3x2,0x2,9 m
            Description :
            *** Demonstration machine ***
            Y1 / Y2 servo electronic
            Hydraulic stamp clamping (WILA Premium)
            Hydraulic die clamping (WILA Premium) including motorized crowning
            Back gauge system "DENER"
            X-; R-; Z1-; Z2- axis
            FIESSLER AKAS LC II M Typ 4 (manual adjustment)with box bending
            Rolleri quick-change tools segmented:
            Punch TPR200.28.R1, die TMR100.12.30 total 3.050 mm length
          Datasheet
          Request / Contact
          used  Hydr. pressbrake DURMA HAP 30120


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92335 · Hydr. pressbrake

          DURMA - HAP 30120 - - 1999 - ELGO P8822

          Technical details
          pressure 120 t︱chamfer lenght 3050 mm︱distance between columns 2540 mm︱y-Axis min./max. 0 - 120 mm︱x-travel 15 - 620 mm︱throat 350 mm︱quantity of oil 150 l︱stroke 160 mm︱no. of strokes 9 Hub/min︱table height 870 mm︱table width 225 mm︱dayligth 350 mm︱Control ELGO P8822 ︱total power requirement 11 kW︱weight of the machine ca. 7,8 t︱dimensions of the machine ca. 4,0 x2,0 x 2,6 m︱
          Overtravel measurement Y-;X-axis motorized (Push button and NC controlled) split bending punch 90°/125mm high Multi-V die 100x100mm / ~ V10,V10,V12,V16,V22,V50,V60 2 height-adjustable stop fingers Two-hand/foot operation Work area safety doors (electrically protected)
            pressure 120 t
            chamfer lenght 3050 mm
            distance between columns 2540 mm
            y-Axis min./max. 0 - 120 mm
            x-travel 15 - 620 mm
            throat 350 mm
            quantity of oil 150 l
            stroke 160 mm
            no. of strokes 9 Hub/min
            table height 870 mm
            table width 225 mm
            dayligth 350 mm
            Control ELGO P8822
            total power requirement 11 kW
            weight of the machine ca. 7,8 t
            dimensions of the machine ca. 4,0 x2,0 x 2,6 m
            Description :
            Overtravel measurement
            Y-;X-axis motorized (Push button and NC controlled)
            split bending punch 90°/125mm high
            Multi-V die 100x100mm / ~ V10,V10,V12,V16,V22,V50,V60
            2 height-adjustable stop fingers
            Two-hand/foot operation
            Work area safety doors (electrically protected)
          Datasheet
          Request / Contact
          used  Hydr. pressbrake MENGELE HB 130-3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92285 · Hydr. pressbrake

          MENGELE - HB 130-3 - - 1999 - Cybelec DNC 80

          Technical details
          pressure 130 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱dayligth 510 mm︱Control Cybelec DNC 80 ︱throat 320 mm︱stroke 250 mm︱work height max. 900 mm︱weight of the machine ca. 12000 kg︱dimensions of the machine ca. 4,05x2,1x2,85 m︱
          Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic WILA stamp clamping hydraulic AMADA die clamping 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices
            pressure 130 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            dayligth 510 mm
            Control Cybelec DNC 80
            throat 320 mm
            stroke 250 mm
            work height max. 900 mm
            weight of the machine ca. 12000 kg
            dimensions of the machine ca. 4,05x2,1x2,85 m
            Description :
            Control Cybelec DNC 80
            Y1;Y2;X;R axis
            Die shift with hand wheel
            4 stop fingers
            hydraulic WILA stamp clamping
            hydraulic AMADA die clamping
            2 pcs. support arms
            saftey 2-hand / foot operation
            Various stamps and matrices
          Datasheet
          Request / Contact

          Laser Cutting Machine

          used  Laser Cutting Machine DURMA FL-3015-L-6kW


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92160 · Laser Cutting Machine

          DURMA - FL-3015-L-6kW - - 2019 -

          Technical details
          table length 3050 mm︱table width 1530 mm︱burner heads 0 ︱thickness at "Niro-steel" 24 mm︱plate thickness alu 14 mm︱working area 3050 x 1530 mm︱stroke z-axis 130 mm︱speed y-axis 170 mm/min︱speed z-axis 50 mm/min︱positioning accuracy 0,05 mm︱repeating accuracy 0,02 mm︱total power requirement 75 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. m︱
          demonstration machine FANUC 6000 W fiber laser source, automat. beam centering, DENER Smart Nest, Air Dryer, DENER Filter, Camera & Surveillance, air-conditioned control cabinet, Precitec Procutter cutting head, shuttle table, automatic nozzle cleaning, central lubrication, scrap pan for small parts etc. dirt, METALIX Pronest automatic nesting, multi-chamber suction system, warning lamp
            table length 3050 mm
            table width 1530 mm
            thickness at "Niro-steel" 24 mm
            plate thickness alu 14 mm
            working area 3050 x 1530 mm
            stroke z-axis 130 mm
            speed y-axis 170 mm/min
            speed z-axis 50 mm/min
            positioning accuracy 0,05 mm
            repeating accuracy 0,02 mm
            total power requirement 75 kW
            weight of the machine ca. 16 t
            Description :
            demonstration machine
            FANUC 6000 W fiber laser source, automat. beam centering,
            DENER Smart Nest, Air Dryer, DENER Filter, Camera & Surveillance,
            air-conditioned control cabinet, Precitec Procutter cutting head, shuttle table,
            automatic nozzle cleaning, central lubrication, scrap pan for small parts etc.
            dirt, METALIX Pronest automatic nesting, multi-chamber suction system,
            warning lamp
          Datasheet
          Request / Contact
          used  Laser Cutting Machine AMADA LCG3015


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92350 · Laser Cutting Machine

          AMADA - LCG3015 - - 2014 - AMNC-F

          Technical details
          laser capacity in Watt 3500 ︱travel -x axis 3070 mm︱travel -y axis 1550 mm︱Control AMNC-F ︱table load capacity 920 KG︱material length max. 3050 mm︱material width max. 1525 mm︱total power requirement 30 kW︱weight of the machine ca. 8,2 t︱dimensions of the machine ca. 10,00 x 2,90 x 2,20 m︱
            laser capacity in Watt 3500
            travel -x axis 3070 mm
            travel -y axis 1550 mm
            Control AMNC-F
            table load capacity 920 KG
            material length max. 3050 mm
            material width max. 1525 mm
            total power requirement 30 kW
            weight of the machine ca. 8,2 t
            dimensions of the machine ca. 10,00 x 2,90 x 2,20 m
          Datasheet
          Request / Contact
          used  Laser Cutting Machine BYSTRONIC ByVention 3015


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92353 · Laser Cutting Machine

          BYSTRONIC - ByVention 3015 - - 2007 -

          Technical details
          x-travel 1562 mm︱y-travel 772 mm︱z-travel 100 mm︱laser capacity in Watt 2200 ︱positioning speed x 100 / y 100 m/min.︱working area 3000 x 1500 mm︱fuse 80 A︱Power connection 37 kVA︱weight of the machine ca. 13,5 t︱dimensions of the machine ca. 13,5 x 2,2 x 5,60 m︱
          Co2 ByLaser 2200M Flue gas extraction with water cooling WKL 300-F Laser power: 2.2 kW (2200 W) Maximum sheet thickness (mild steel): 8 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (acid-resistant steel): 6 mm Maximum sheet thickness (aluminum): 4 mm Maximum workpiece dimensions (L x W): 3000 x 1500 mm 2x cutting head 5" 1x cutting head 7.5" various copper nozzles
            x-travel 1562 mm
            y-travel 772 mm
            z-travel 100 mm
            laser capacity in Watt 2200
            positioning speed x 100 / y 100 m/min.
            working area 3000 x 1500 mm
            fuse 80 A
            Power connection 37 kVA
            weight of the machine ca. 13,5 t
            dimensions of the machine ca. 13,5 x 2,2 x 5,60 m
            Description :
            Co2 ByLaser 2200M
            Flue gas extraction with water cooling WKL 300-F
            Laser power: 2.2 kW (2200 W)
            Maximum sheet thickness (mild steel): 8 mm
            Maximum sheet thickness (stainless steel): 6 mm
            Maximum sheet thickness (acid-resistant steel): 6 mm
            Maximum sheet thickness (aluminum): 4 mm
            Maximum workpiece dimensions (L x W): 3000 x 1500 mm
            2x cutting head 5"
            1x cutting head 7.5"
            various copper nozzles
          Datasheet
          Request / Contact
          used  Laser Cutting Machine AMADA Alpha Laser 2415 III


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92300 · Laser Cutting Machine

          AMADA - Alpha Laser 2415 III - - 2003 -

          Technical details
          table length 5040 mm︱table width 1550 mm︱ 12 mm︱plate weight max. 330 kg︱travel -x axis 2520 mm︱travel -z axis 300 mm︱travel -y axis 1550 mm︱cutting speed 20 m/min︱feed speed X/Y/Z 80/80/60 m/min︱positioning accuracy +-0,01 mm/500 mm mm︱repeatability +/- 0,005 mm︱table height 820 mm︱size of opening 550x1550 mm︱compressed air 6/20 bar︱total power requirement 10 kW︱weight of the machine ca. ca. 6,5 t︱dimensions of the machine ca. 2,5x5,7x2,3 m︱
            table length 5040 mm
            table width 1550 mm
            12 mm
            plate weight max. 330 kg
            travel -x axis 2520 mm
            travel -z axis 300 mm
            travel -y axis 1550 mm
            cutting speed 20 m/min
            feed speed X/Y/Z 80/80/60 m/min
            positioning accuracy +-0,01 mm/500 mm mm
            repeatability +/- 0,005 mm
            table height 820 mm
            size of opening 550x1550 mm
            compressed air 6/20 bar
            total power requirement 10 kW
            weight of the machine ca. ca. 6,5 t
            dimensions of the machine ca. 2,5x5,7x2,3 m
          Datasheet
          Request / Contact

          Notching Machine

          used  Notching Machine EUROMAC 220/4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92287 · Notching Machine

          EUROMAC - 220/4 - - 1999 -

          Technical details
          plate thickness 3-4 mm︱pressure 0 t︱Cutting length 220 mm︱table height 900 mm︱quantity of oil 35 l︱Table dimensions 950 x 790 mm︱total power requirement 4 kW︱weight of the machine ca. 0,95 t︱dimensions of the machine ca. 1,0 x 0,86 x 1,2 m︱
          Foot switch angle adjustment 30°-140° automatic cutting gap adjustment
            plate thickness 3-4 mm
            Cutting length 220 mm
            table height 900 mm
            quantity of oil 35 l
            Table dimensions 950 x 790 mm
            total power requirement 4 kW
            weight of the machine ca. 0,95 t
            dimensions of the machine ca. 1,0 x 0,86 x 1,2 m
            Description :
            Foot switch
            angle adjustment 30°-140°
            automatic cutting gap adjustment
          Datasheet
          Request / Contact
          used  Notching Machine BOSCHERT K90-E200


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92305 · Notching Machine

          BOSCHERT - K90-E200 - - 1983 -

          Technical details
          plate thickness 4 mm︱blade length 220 mm︱pressure 0 t︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 1,6 x 1,7 x 1,6 m︱total power requirement 2,5 kW︱
          Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert.
            plate thickness 4 mm
            blade length 220 mm
            weight of the machine ca. 1,5 t
            dimensions of the machine ca. 1,6 x 1,7 x 1,6 m
            total power requirement 2,5 kW
            Description :
            Combined notching machine with a fixed 90° angle and an adjustable
            rectangular notching unit variable up to 200mm length x fixed 100mm width.
            There are 2 manually adjustable stops with a digital display.
            Axle length X900mm / Y300mm
            There is no stamp holder / punch / hold-down device for this.
            These parts can be purchased from Boschert.

          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used  Plate Shear - Hydraulic ATLANTIC ATS 3006


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92286 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3006 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3460 mm︱table height 800 mm︱0 220 bar︱cutting angle adjustment 0,5x3 °︱down holder 18 ︱back stop - adjustable 750 mm︱front stop - adjustable 1000 mm︱main drive 7,5 kW︱oil volume 300 l︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,7x2,0x1,8 m︱
          cutting angle adjustment manually blade gap adjustment manually angle stop
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3460 mm
            table height 800 mm
            0 220 bar
            cutting angle adjustment 0,5x3 °
            down holder 18
            back stop - adjustable 750 mm
            front stop - adjustable 1000 mm
            main drive 7,5 kW
            oil volume 300 l
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,7x2,0x1,8 m
            Description :
            cutting angle adjustment manually
            blade gap adjustment manually
            angle stop
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic DARLEY GS 4000 x 6


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-91535 · Plate Shear - Hydraulic

          DARLEY - GS 4000 x 6 - - 1989 - DARLEY

          Technical details
          sheet width 4100 mm︱plate thickness 6 mm︱distance between columns mm︱Control DARLEY ︱cutting angle 1°20' °︱quantity of oil 150 l︱total power requirement 18,5 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 4,6x2,3x2,0 m︱
          Cutting length adjustment, foot switch, 3 support arms (left with scale), motorized rear stop, finger guard, 21 hold-down devices, sheet metal slide, manual cutting gap adjustment, sheet metal holding device
            sheet width 4100 mm
            plate thickness 6 mm
            Control DARLEY
            cutting angle 1°20' °
            quantity of oil 150 l
            total power requirement 18,5 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 4,6x2,3x2,0 m
            Description :
            Cutting length adjustment,
            foot switch,
            3 support arms (left with scale),
            motorized rear stop,
            finger guard,
            21 hold-down devices,
            sheet metal slide,
            manual cutting gap adjustment,
            sheet metal holding device
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic FASTI TCHE 25/6


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92328 · Plate Shear - Hydraulic

          FASTI - TCHE 25/6 - - 1986 - Elgo Typ 85

          Technical details
          sheet width 2500 mm︱plate thickness 6 mm︱back stop - adjustable 10 - 1000 mm︱Control Elgo Typ 85 ︱total power requirement 16 kW︱weight of the machine ca. 5,4 t︱dimensions of the machine ca. 2,80 x 2,20 x 1,85 m︱
          Cutting gap adjustment on both sides by hand (dial gauge) Side stop rail 1250 mm 3 support arms 1000 mm Sheet support Light barrier protection of the backgauge Sheet pan
            sheet width 2500 mm
            plate thickness 6 mm
            back stop - adjustable 10 - 1000 mm
            Control Elgo Typ 85
            total power requirement 16 kW
            weight of the machine ca. 5,4 t
            dimensions of the machine ca. 2,80 x 2,20 x 1,85 m
            Description :
            Cutting gap adjustment on both sides by hand (dial gauge)
            Side stop rail 1250 mm
            3 support arms 1000 mm
            Sheet support
            Light barrier protection of the backgauge
            Sheet pan
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic SAFAN VS310-6


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92269 · Plate Shear - Hydraulic

          SAFAN - VS310-6 - - 1980 -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱cutting angle 0,5-2 °︱quantity of oil 150 l︱distance between columns mm︱Control ︱total power requirement 15 kW︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,9x2,2x1,7 m︱
          Front stop on the left, 2 support arms, motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives
            sheet width 3000 mm
            plate thickness 6 mm
            cutting angle 0,5-2 °
            quantity of oil 150 l
            total power requirement 15 kW
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,9x2,2x1,7 m
            Description :
            Front stop on the left,
            2 support arms,
            motorized rear stop,
            manual adjustment of the cutting gap,
            1 set of spare knives
          Datasheet
          Request / Contact
          used  Plate Shear - Hydraulic MENGELE S6-2000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-92306 · Plate Shear - Hydraulic

          MENGELE - S6-2000 - - 1980 - Elgo Typ 85

          Technical details
          sheet width 2050 mm︱plate thickness 6 mm︱Control Elgo Typ 85 ︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 6 t︱dimensions of the machine ca. 2,3x2,8x2 m︱
          sheet support system
            sheet width 2050 mm
            plate thickness 6 mm
            Control Elgo Typ 85
            weight of the machine ca. 6 t
            dimensions of the machine ca. 2,3x2,8x2 m
            Description :
            sheet support system
          Datasheet
          Request / Contact

          Press Brake - Mechanical

          used  Press Brake - Mechanical EUROMAC FX Bend 850/4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-91838 · Press Brake - Mechanical

          EUROMAC - FX Bend 850/4 - - 2017 -

          Technical details
          pressure 20 t︱chamfer lenght 850 mm︱distance between columns 850 mm︱dayligth 470 mm︱y-travel 196 mm︱Y - Axis speed 200 mm/sec.︱x-travel 375 + 400 mm︱X - Axis speed 250 mm/sec.︱z-travel 730 mm︱Z - axis speed 1100 mm/sec.︱R - axys setting range 180 mm︱r -axis speed 600 mm/sec.︱total power requirement 5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 1,6 x 2,0 m︱
          DEMONSTRATION MACHINE Standard accessories: CNC control Panasonic Toughbook incl. USB and WIFI connection Direct drive via servo motor and ball screw safety device incl. dual lasers Monoblock machine frame made of Meehanite (700N/mm² tensile strength) Back gauge with 2 axes CNC controlled Ergonomic design Upper tool clamping system Amada / Promecam Lower tool clamping system Amada / Promecam Special accessories: Backgauge 4-axis CNC controlled X / R / Z1 / Z2 Laser Safe Iris Rapid Bend Hydraulic upper tool clamping system Wila 13mm Hydraulic lower tool clamping system Wila 13mm Remarks: Ergonomic press brake made from a stable monobloc frame (Meehanite cast 700N/mm²) The machine has a direct drive via a servo motor and Ball screw, this screw works on tension to avoid deformation. In addition, the machine is equipped with a 4-axis backgauge, a hydraulic Wila clamping and an Iris Rapid Bend safety device fitted. The machine can be easily transported with a forklift.
            pressure 20 t
            chamfer lenght 850 mm
            distance between columns 850 mm
            dayligth 470 mm
            y-travel 196 mm
            Y - Axis speed 200 mm/sec.
            x-travel 375 + 400 mm
            X - Axis speed 250 mm/sec.
            z-travel 730 mm
            Z - axis speed 1100 mm/sec.
            R - axys setting range 180 mm
            r -axis speed 600 mm/sec.
            total power requirement 5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 1,6 x 2,0 m
            Description :
            DEMONSTRATION MACHINE
            Standard accessories:
            CNC control Panasonic Toughbook incl. USB and WIFI connection
            Direct drive via servo motor and ball screw
            safety device incl. dual lasers
            Monoblock machine frame made of Meehanite (700N/mm² tensile strength)
            Back gauge with 2 axes CNC controlled
            Ergonomic design
            Upper tool clamping system Amada / Promecam
            Lower tool clamping system Amada / Promecam
            Special accessories:
            Backgauge 4-axis CNC controlled X / R / Z1 / Z2
            Laser Safe Iris Rapid Bend
            Hydraulic upper tool clamping system Wila 13mm
            Hydraulic lower tool clamping system Wila 13mm
            Remarks:
            Ergonomic press brake made from a stable monobloc frame
            (Meehanite cast 700N/mm²)
            The machine has a direct drive via a servo motor and
            Ball screw, this screw works on tension to avoid deformation.
            In addition, the machine is equipped with a 4-axis backgauge, a
            hydraulic Wila clamping and an Iris Rapid Bend safety device
            fitted.
            The machine can be easily transported with a forklift.
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical DMG-DECKEL-MAHO Milltap700


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17961 · Machining Center - Vertical

          DMG-DECKEL-MAHO - Milltap700 - - 2012 - SIN840D

          Technical details
          x-travel 700 mm︱y-travel 420 mm︱z-travel 380 mm︱Control SIN840D ︱table surface area 840 x 420 mm︱table load 0,30 t︱0 550 x 880 mm︱spindle turning speed - stepless 10 - 10.000 U/min︱power capacity at 100 % load 4,50 kW︱tool magazin: 15 ︱tool taper BT30 ︱total power requirement kW︱weight of the machine ca. 4,00 t︱dimensions of the machine ca. 5,00 x 3,50 x H2,80 m︱
            x-travel 700 mm
            y-travel 420 mm
            z-travel 380 mm
            Control SIN840D
            table surface area 840 x 420 mm
            table load 0,30 t
            0 550 x 880 mm
            spindle turning speed - stepless 10 - 10.000 U/min
            power capacity at 100 % load 4,50 kW
            tool magazin: 15
            tool taper BT30
            weight of the machine ca. 4,00 t
            dimensions of the machine ca. 5,00 x 3,50 x H2,80 m
          Datasheet
          Request / Contact

          Balancing Machine

          used  Balancing Machine SCHENCK 300MBRK


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17672 · Balancing Machine

          SCHENCK - 300MBRK - - 2000 -

          Technical details
          workpiece weight 7,5-35 kg︱workpiece length 300 - 750 mm︱diameter 190 mm︱balancing speed variable 400 U/min︱Control ︱rated current 16 A︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,10 x 1,50 x 2,10 m︱
            workpiece weight 7,5-35 kg
            workpiece length 300 - 750 mm
            diameter 190 mm
            balancing speed variable 400 U/min
            rated current 16 A
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,10 x 1,50 x 2,10 m
          Datasheet
          Request / Contact

          Coordinate Measuring Machine

          used  Coordinate Measuring Machine ZEISS WMM850S


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-52750 · Coordinate Measuring Machine

          ZEISS - WMM850S - - 1984 -

          Technical details
          table length 1200 mm︱table width 1000 mm︱daylight mm︱measuring range X-axis 900 mm︱measuring range Y-axis 1200 mm︱measuring range Z-axis 600 mm︱Control ︱total power requirement kW︱weight of the machine ca. 4,00 t︱dimensions of the machine ca. 3,50 x 2,50 x H3,80 m︱
            table length 1200 mm
            table width 1000 mm
            measuring range X-axis 900 mm
            measuring range Y-axis 1200 mm
            measuring range Z-axis 600 mm
            weight of the machine ca. 4,00 t
            dimensions of the machine ca. 3,50 x 2,50 x H3,80 m
          Datasheet
          Request / Contact

          Measuring Machine

          used  Measuring Machine FARO EDGE MODELL 14000 BT/WLAN-HD


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17936 · Measuring Machine

          FARO - EDGE MODELL 14000 BT/WLAN-HD - - 2014 - FARO

          Technical details
          Working volume 3,7 m︱Accuracy 0,091 / 0,064 mm︱ ohne Messplatte mm︱Control FARO ︱total power requirement 230 V︱weight of the machine ca. 12 KG︱dimensions of the machine ca. 1,5 x 0,5 x 0,5 m︱
          7 axis measuring arm with ball probe 3mm / 6mm incl. FARO Laser Line Probe HD On-board touchscreen for quick basic measurements without a laptop WiFi 802.11 Bluetooth Information from the type plate: rev 3.6; single point 0.0640mm; Volumetric 0.0910mm; Cert. Date July 15, 2022 cpl. in transport case (approx. 100 kg)
            Working volume 3,7 m
            Accuracy 0,091 / 0,064 mm
            ohne Messplatte mm
            Control FARO
            total power requirement 230 V
            weight of the machine ca. 12 KG
            dimensions of the machine ca. 1,5 x 0,5 x 0,5 m
            Description :
            7 axis measuring arm with ball probe 3mm / 6mm
            incl. FARO Laser Line Probe HD
            On-board touchscreen for quick basic measurements without a laptop
            WiFi 802.11
            Bluetooth
            Information from the type plate:
            rev 3.6; single point 0.0640mm; Volumetric 0.0910mm;
            Cert. Date July 15, 2022
            cpl. in transport case (approx. 100 kg)
          Datasheet
          Request / Contact
          used  Measuring Machine FARO EDGE MODELL 14000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17934 · Measuring Machine

          FARO - EDGE MODELL 14000 - - 2012 - FARO

          Technical details
          Working volume 3,7 m︱Accuracy 0,091 / 0,064 mm︱Plate dimensions ohne Messplatte mm︱Control FARO ︱total power requirement 230 V︱weight of the machine ca. 12 t︱dimensions of the machine ca. 1,5 x 1,5 x 1,5 m︱
          7 axis measuring arm with ball stylus 3mm / 6mm incl. FARO Laser Line Probe On-board touchscreen for quick basic measurements without a laptop WiFi 802.11 Bluetooth Information from the nameplate: Rev 3.1; Single Point 0.0640mm; Volumetric 0.0910mm; Cert.Date May 31, 2022 complete in a transport case (approx. 100 kg)
            Working volume 3,7 m
            Accuracy 0,091 / 0,064 mm
            Plate dimensions ohne Messplatte mm
            Control FARO
            total power requirement 230 V
            weight of the machine ca. 12 t
            dimensions of the machine ca. 1,5 x 1,5 x 1,5 m
            Description :
            7 axis measuring arm with ball stylus 3mm / 6mm
            incl. FARO Laser Line Probe
            On-board touchscreen for quick basic measurements without a laptop
            WiFi 802.11
            Bluetooth
            Information from the nameplate:
            Rev 3.1; Single Point 0.0640mm; Volumetric 0.0910mm;
            Cert.Date May 31, 2022
            complete in a transport case (approx. 100 kg)
          Datasheet
          Request / Contact
          used  Measuring Machine FARO EDGE BT/WLAN


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17935 · Measuring Machine

          FARO - EDGE BT/WLAN - - 2012 - FARO

          Technical details
          Working volume 3,7 m︱Accuracy 0,091 / 0,064 mm︱ ohne Messplatte mm︱Control FARO ︱total power requirement 230 V︱weight of the machine ca. 12 t︱dimensions of the machine ca. 1,5 x 0,5 x 0,5 m︱
          7 axis measuring arm with ball stylus 3mm / 6mm incl. FARO Laser Line Probe On-board touchscreen for quick basic measurements without a laptop WiFi 802.11 Bluetooth Information from the nameplate: Rev 2.1; Single Point 0.0640mm; Volumetric 0.0910mm; Cert.Date Sept. 28, 2021 complete in a transport case (approx. 100 kg)
            Working volume 3,7 m
            Accuracy 0,091 / 0,064 mm
            ohne Messplatte mm
            Control FARO
            total power requirement 230 V
            weight of the machine ca. 12 t
            dimensions of the machine ca. 1,5 x 0,5 x 0,5 m
            Description :
            7 axis measuring arm with ball stylus 3mm / 6mm
            incl. FARO Laser Line Probe
            On-board touchscreen for quick basic measurements without a laptop
            WiFi 802.11
            Bluetooth
            Information from the nameplate:
            Rev 2.1; Single Point 0.0640mm; Volumetric 0.0910mm;
            Cert.Date Sept. 28, 2021
            complete in a transport case (approx. 100 kg)
          Datasheet
          Request / Contact

          Adjusting Instrument

          used  Adjusting Instrument KELCH Kalimat a 58-3/C


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17923 · Adjusting Instrument

          KELCH - Kalimat a 58-3/C - - 1998 -

          Technical details
          measuring range X-axis 0 - 230 mm︱measuring range Z-axis 800 mm︱tool taper DIN 69871 SK40 ︱weight of the machine ca. 980 Kg︱dimensions of the machine ca. 2,00 x 1,50 x 1,95 m︱
          CNC tool measuring device Cutting edge scanning cup MEGAVISION EASY WebSet measurement control based on an industrial PC Quick adjustment CNC motorized or selective one-handed operation Fine adjustment µ-precise with CNC or electronic handwheels via the entire measuring range 3 axes CNC (X, Z, rotation) Existing tool adapter for SK40
            measuring range X-axis 0 - 230 mm
            measuring range Z-axis 800 mm
            tool taper DIN 69871 SK40
            weight of the machine ca. 980 Kg
            dimensions of the machine ca. 2,00 x 1,50 x 1,95 m
            Description :
            CNC tool measuring device
            Cutting edge scanning cup MEGAVISION
            EASY WebSet measurement control based on an industrial PC
            Quick adjustment CNC motorized or selective one-handed operation
            Fine adjustment µ-precise with CNC or electronic handwheels via the
            entire measuring range
            3 axes CNC (X, Z, rotation)
            Existing tool adapter for SK40
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Amann Werkzeugmaschinen GmbH   85716 - Unterschleißheim Landshuter Straße 1 Deutschland
          Amann Werkzeugmaschinen GmbH

          Landshuter Straße 1



          Contact Trader


            Amann Werkzeugmaschinen GmbH
           Landshuter Straße 1
            85716 - Unterschleißheim
            Deutschland
            (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de
            Contact person:
          Herrn Alois Kindermann 08931775420

            Auf 5000 m² Ausstellungsfläche stehen ständig mehr als 500 moderne gebrauchte Werkzeugmaschinen für unsere Kunden zu Verfügung.




          Machine category


          Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Ausklinkmaschine · Auswuchtmaschine · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechrundbiegemaschine - 3 Walzen · Bodenfräse · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydr.-Dualform · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Einstellgerät · Einständerexzenterpresse · Exzenterpresse - Einständer · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Frässtichel-Schleifmaschine · Förderband · Hydraulische - Zweisäulenpresse · Hydraulische Presse · Kaltwalzmaschine · Kappsäge · Kegelrad - Läppmaschine · Kegelrad-Prüfmaschine · Kegelradschleifmaschine · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Nockenwellenschleifmaschine · Plandrehmaschine · Profilbearbeitungszentrum · Profilschleifmaschine · Rundschleifmaschine - Universal · Schwenkbiegemaschine · Spiralkegelradschneidmaschine · Stanzautomat · Stanzautomat-Doppelständer · Tafelschere - hydraulisch · Tischbohrmaschine · Turbinenschaufelfräsmaschine · Tuschierpresse · Universalschleifmaschine · Vertikaldrehmaschine · Zahnradschleifmaschine · Zahnradstossmaschine ·