,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Amann Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Double Column Drawing Press -Hydr.

          used  Double Column Drawing Press -Hydr. MÜLLER KEZ 315-16/6.5.1 (UVV)


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-15647 · Double Column Drawing Press -Hydr.

          MÜLLER - KEZ 315-16/6.5.1 (UVV) - - 1983 -

          Technical details
          pressure 315 t︱distance between columns 1620 mm︱stroke 600 mm︱distance table/ram, max. stroke up, adjustment up 1000 mm︱table surface area 1600 x 1100 mm︱pressure of drawing cushion in ram 20 t︱stroke of drawing cushion in ram 100 mm︱drawing cushion surface in pusher 300 x 300 mm︱side window 600 x 1100 mm︱table height over floor 750 mm︱ram surface 1600 x 1100 mm︱oil volume 1500 l︱height over floor 5,05 mm︱height over floor 0,45 mm︱power requirement 110 kW︱weight 35,0 t︱dimensions (WxDxH) 4,65 x 2,61 x 5,50 m︱
          unser Listenpreis versteht sich inklusive Inbetriebnahme der Maschine in unserem Lager, sowie Demonstration der Lauffunktionen ohne Werkzeug, im Übrigen wie die Presse steht und liegt, frei LKW verladen mit ölhydr. Antrieb, hydr. und elektr. Steuerung nach UVV, KEIN! Ziehkissen im Tisch, hydr. Ziehkissen im Stößel, obere und untere Hubbegrenzung, druck-, zeit- und wegabhängig steuerbar, pneum. Stößelverriegelung, hydr. Schnittschlagdämpfung, Zweihandbedienung, Schaltschrank
            pressure 315 t
            distance between columns 1620 mm
            stroke 600 mm
            distance table/ram, max. stroke . 1000 mm
            table surface area 1600 x 1100 mm
            pressure of drawing cushion in r. 20 t
            stroke of drawing cushion in ram 100 mm
            drawing cushion surface in pushe. 300 x 300 mm
            side window 600 x 1100 mm
            table height over floor 750 mm
            ram surface 1600 x 1100 mm
            oil volume 1500 l
            height over floor 5,05 mm
            height over floor 0,45 mm
            power requirement 110 kW
            weight 35,0 t
            dimensions (WxDxH) 4,65 x 2,61 x 5,50 m
            Description :
            unser Listenpreis versteht sich inklusive Inbetriebnahme der Maschine in unserem Lager, sowie Demonstration der Lauffunktionen ohne Werkzeug, im Übrigen wie die Presse steht und liegt, frei LKW verladen
            mit ölhydr. Antrieb, hydr. und elektr. Steuerung nach UVV, KEIN! Ziehkissen im Tisch, hydr. Ziehkissen im Stößel, obere und untere Hubbegrenzung, druck-, zeit- und wegabhängig steuerbar, pneum. Stößelverriegelung, hydr. Schnittschlagdämpfung, Zweihandbedienung, Schaltschrank
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17171 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.2 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17172 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.3 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 600 25.4.4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17173 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 600 25.4.4 - - 1974 -

          Technical details
          pressure 600 t︱distance between columns 2600 mm︱stroke 900 mm︱distance table/blankh.,max. stroke up,adjustm. up 1600 mm︱table surface area 2500 x 1730 mm︱die-cushion pressure inside the table 250 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 63 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 2500 x 1730 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          overhauled in 2005
            pressure 600 t
            distance between columns 2600 mm
            stroke 900 mm
            distance table/blankh.,max. stro. 1600 mm
            table surface area 2500 x 1730 mm
            die-cushion pressure inside the . 250 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 63 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 2500 x 1730 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Description :
            overhauled in 2005
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17159 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.2 - - 1973 - Siemens S7

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱Control Siemens S7 ︱height over floor 7,7 m︱total power requirement 300 kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. 5,75 x 4,3 x 9,55 m︱
          Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the seller before dismantling
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            Control Siemens S7
            height over floor 7,7 m
            total power requirement 300 kW
            weight of the machine ca. 280 t
            dimensions of the machine ca. 5,75 x 4,3 x 9,55 m
            Description :
            Year of construction 1973
            Modernization 2005
            with oil-hydraulic drive, hydraulically controlled drawing cushion in the table
            and
            Ram, hydraulic cutting impact damping
            stored dismantled - short video available from the seller before dismantling
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17160 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.3 - - 1973 -

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱total power requirement kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. m︱
          The machine was overtaken 1999.
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            weight of the machine ca. 280 t
            Description :
            The machine was overtaken 1999.
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 1000-40.3.5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17162 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 1000-40.3.5 - - 1973 -

          Technical details
          pressure 1000 t︱distance between columns 4150 mm︱stroke 1200 mm︱distance table/blankh.,max. stroke up,adjustm. up 2100 mm︱table surface area 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 300 mm︱die-cushion pressure in pusher 100 t︱stroke of drawing cushion in pusher 150 mm︱ram surface 4000 x 2200 mm︱column travel -side 1300 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱Cut Shock absorption hydraulic ︱total power requirement kW︱weight of the machine ca. 280 t︱dimensions of the machine ca. m︱
          The machine was overtaken 1999.
            pressure 1000 t
            distance between columns 4150 mm
            stroke 1200 mm
            distance table/blankh.,max. stro. 2100 mm
            table surface area 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 300 mm
            die-cushion pressure in pusher 100 t
            stroke of drawing cushion in pus. 150 mm
            ram surface 4000 x 2200 mm
            column travel -side 1300 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            Cut Shock absorption hydraulic
            weight of the machine ca. 280 t
            Description :
            The machine was overtaken 1999.
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER BZE 1600-40.7.1


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17163 · Double Column Drawing Press -Hydr.

          MÜLLER - BZE 1600-40.7.1 - - 1973 -

          Technical details
          pressure 1600 t︱distance between columns 3160 mm︱ram stroke 1450 mm︱distance table/blankh.,max. stroke up,adjustm. up 2250 mm︱table surface area 4000 x 2200 mm︱ram pressure 1000 t︱pressure of blank holder 600 t︱stroke of blankholder at the bottom 1000 mm︱stroke of blankholder with adjustment 0-100 mm 1450 mm︱blank holder size 4000 x 2200 mm︱die-cushion pressure inside the table 360 t︱stroke of drawing cushion in table 275 / 400 mm︱ram surface 4000 x 2200 mm︱column travel -side 1100 mm︱die-cushion inside the table hydraulic, controlled ︱die-cushion in pusher hydraulic, controlled ︱oil volume 9000 l︱total power requirement 390 kW︱weight of the machine ca. 250 t︱dimensions of the machine ca. 6,0 x 4,3 x 10,5 m︱
          Head press (1600 tons) of a press line with five subsequent presses (800 tons)
            pressure 1600 t
            distance between columns 3160 mm
            ram stroke 1450 mm
            distance table/blankh.,max. stro. 2250 mm
            table surface area 4000 x 2200 mm
            ram pressure 1000 t
            pressure of blank holder 600 t
            stroke of blankholder at the bot. 1000 mm
            stroke of blankholder with adjus. 1450 mm
            blank holder size 4000 x 2200 mm
            die-cushion pressure inside the . 360 t
            stroke of drawing cushion in tab. 275 / 400 mm
            ram surface 4000 x 2200 mm
            column travel -side 1100 mm
            die-cushion inside the table hydraulic, controlled
            die-cushion in pusher hydraulic, controlled
            oil volume 9000 l
            total power requirement 390 kW
            weight of the machine ca. 250 t
            dimensions of the machine ca. 6,0 x 4,3 x 10,5 m
            Description :
            Head press (1600 tons) of a press line with five subsequent presses (800 tons)
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.5


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17168 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.5 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.1


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17164 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.1 - - 1972 -

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17165 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.2 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.3


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17166 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.3 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m
          Datasheet
          Request / Contact
          used  Double Column Drawing Press -Hydr. MÜLLER ZE 800-31.1.4


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17167 · Double Column Drawing Press -Hydr.

          MÜLLER - ZE 800-31.1.4 - - 1972 - Siemens S5

          Technical details
          pressure 800 t︱distance between columns 3160 mm︱stroke 1100 mm︱control Siemens S5 ︱distance table/blankh.,max. stroke up,adjustm. up 1900 mm︱table surface area 3100 x 1900 mm︱die-cushion pressure inside the table 300 t︱stroke of drawing cushion in table 400 mm︱die-cushion pressure in pusher 80 t︱stroke of drawing cushion in table 150 mm︱ram surface 3100 x 1900 mm︱die-cushion in pusher hydraulic, controlled ︱die-cushion inside the table hydraulic, controlled ︱total power requirement 200 kW︱weight of the machine ca. 150 t︱dimensions of the machine ca. 4,95 x 3,3 x 10,2 m︱
            pressure 800 t
            distance between columns 3160 mm
            stroke 1100 mm
            control Siemens S5
            distance table/blankh.,max. stro. 1900 mm
            table surface area 3100 x 1900 mm
            die-cushion pressure inside the . 300 t
            stroke of drawing cushion in tab. 400 mm
            die-cushion pressure in pusher 80 t
            stroke of drawing cushion in tab. 150 mm
            ram surface 3100 x 1900 mm
            die-cushion in pusher hydraulic, controlled
            die-cushion inside the table hydraulic, controlled
            total power requirement 200 kW
            weight of the machine ca. 150 t
            dimensions of the machine ca. 4,95 x 3,3 x 10,2 m
          Datasheet
          Request / Contact

          Eccentric Press - Single Column

          used  Eccentric Press - Single Column MÜLLER EXP 125 R EK


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-16328 · Eccentric Press - Single Column

          MÜLLER - EXP 125 R EK - - 1978 -

          Technical details
          pressure 125 t︱no. of strokes 55 Hub/min︱stroke 20 - 160 mm︱table-size 970 x 660 mm︱max. ram stroke 160 mm︱min. ram stroke 20 mm︱throat 340 mm︱total power requirement 11 kW︱weight of the machine ca. t︱dimensions of the machine ca. 1,5 x 3,0 x m︱
          With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is.
            pressure 125 t
            no. of strokes 55 Hub/min
            stroke 20 - 160 mm
            table-size 970 x 660 mm
            max. ram stroke 160 mm
            min. ram stroke 20 mm
            throat 340 mm
            total power requirement 11 kW
            dimensions of the machine ca. 1,5 x 3,0 x m
            Description :
            With motor, gear reduction, wheel protection, air friction clutch, additional
            brake
            (Make Desch) and safe control according to UVV,
            Mech. Overload protection in the ram
            Two-hand operation, control cabinet
            The price is ex stock as the press is, is, or is.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Perfil del comerciante: Amann Werkzeugmaschinen GmbH

          Contactar con el comerciante



            Amann GmbH Máquinas Herramienta
           Landshut carretera 1
            85716 - Unterschleißheim
            Alemania
            (0049) 89 317754 0 "> (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de

          Perfil del comerciante

          Amann se fundó en 1969 y, a lo largo de los años, se ha desarrollado desde una pequeña empresa hasta convertirse en uno de los distribuidores de máquinas-herramienta más conocidos y confiables de Alemania.

          En 1988, construimos nuestras salas de producción y oficinas actuales en el norte de Munich. Hoy en día, en un área de exhibición de más de 5,000 m2, más de 500 premium de segunda mano y nuevas maquinas automáticas están disponibles para nuestros valiosos clientes en todo momento. Una expansión en tamaño y rango que nos ha permitido no solo servir al campo tradicional europeo, sino también al ambicioso y aún próximo mercado asiático. Nuestros clientes locales, regionales e internacionales valoran mucho nuestras máximas de altos estándares de calidad, fiabilidad alemana, servicios de alta calidad y precios justos por más de 40 años.

          Los contactos extensos con la industria a gran escala nos permiten encontrar casi cualquier herramienta de máquina para usted. Nuestro servicio especial: El servicio de búsqueda de Amann: con él, incluso las consultas de búsqueda altamente especializadas están en buenas manos con nosotros. Todo esto nos convierte en un socio eficiente, que opera a nivel internacional y satisface todas sus necesidades y deseos en el trabajo del metal.

          ¡Descubre las ventajas de trabajar con Amann!

          Amann es una de las principales direcciones para la mayor eficiencia económica. Especialmente para la industria automotriz (OEM y proveedores), aeroespacial, tecnología médica, fabricación de transmisiones, producción de bolas / rodamientos, ingeniería mecánica y tecnología de medición / control. Nuestra línea completa de productos abarca desde máquinas-herramienta convencionales hasta máquinas controladas por CNC. Tenemos en stock todas las máquinas (usadas y nuevas) que son esenciales para su producción: desde tornos, fresadoras, rectificadoras, máquinas cortadoras de engranajes, prensas, centros de mecanizado, máquinas de perforación y líneas completas de producción de cigüeñales hasta máquinas de procesamiento de chapa, como cizallas para placas. Frenos de prensa, máquinas dobladoras de rodillos, máquinas láser, punzonadoras, máquinas de pulido, y muchos más.

          Además, somos expertos en la distribución de líneas de fabricación complejas y en instalaciones operativas completas. Nuestras máquinas herramienta de segunda mano llevan los nombres de fabricantes de renombre como: Aba, Amada, Boeringer, DMG, Doerries, Durma, EHT, Elb, Gleason, Hurth, Ingersoll, Jung, Klingenberg, Liebherr, Lorenz, LVD, Matec, Mazak, Mori Seiki, Müller-Weingarten, Nosstek, Oerlikon, Pfauter, Reisshauer, Schaudt, Schieser, Schuler, Studer, Soraluce, Timesaver, TOS, Trumpf, Schuler, Union, Weiler, Weinbrenner, WFL y Wotan ..

          Oficina y almacén 
          Landshuter Str. 1 - 85716 Unterschleissheim / Muenchen 
          Alemania
          Teléfono
          +49 (89) 317754-0
          Fax 
          +49 (89) 317754-99
          Correo electrónico 
          Todas las consultas y ofertas para: info@amann-wzm.de
          Sr. Bobe
          Gerente general 
          Señora amann
          Firmante autorizado
          Sr. Haertl
          Gerente de Ventas Europa / Africa 
          Sr. Berchner
          Gerente de Ventas Medio Oriente / Asia 
          Sr. Nagel
          Gerente de Ventas Medio Oriente / Asia 
          Señora krappel
          Asistente de ventas 
          Señora juelicher
          Asistente de ventas 




          Amann Werkzeugmaschinen GmbH   85716 - Unterschleißheim Landshuter Straße 1 Deutschland
          Amann Werkzeugmaschinen GmbH

          Landshuter Straße 1



          Contact Trader


            Amann Werkzeugmaschinen GmbH
           Landshuter Straße 1
            85716 - Unterschleißheim
            Deutschland
            (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de
            Contact person:
          Herrn Alois Kindermann 08931775420

            Auf 5000 m² Ausstellungsfläche stehen ständig mehr als 500 moderne gebrauchte Werkzeugmaschinen für unsere Kunden zu Verfügung.




          Machine category


          Abkantpresse - hydraulisch · Abkantpresse - mechanisch · Ausklinkmaschine · Auswuchtmaschine · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechrundbiegemaschine - 3 Walzen · Bodenfräse · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydr.-Dualform · Doppelständerziehpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Einstellgerät · Einständerexzenterpresse · Exzenterpresse - Einständer · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Frässtichel-Schleifmaschine · Förderband · Hydraulische - Zweisäulenpresse · Hydraulische Presse · Kaltwalzmaschine · Kappsäge · Kegelrad - Läppmaschine · Kegelrad-Prüfmaschine · Kegelradschleifmaschine · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Messmaschine · Nockenwellenschleifmaschine · Plandrehmaschine · Profilbearbeitungszentrum · Profilschleifmaschine · Rundschleifmaschine - Universal · Schwenkbiegemaschine · Spiralkegelradschneidmaschine · Stanzautomat · Stanzautomat-Doppelständer · Tafelschere - hydraulisch · Tischbohrmaschine · Turbinenschaufelfräsmaschine · Tuschierpresse · Universalschleifmaschine · Vertikaldrehmaschine · Zahnradschleifmaschine · Zahnradstossmaschine ·