Fork Lift Truck - Electric

sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱

---

- Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

dimension 3.709 x 1.744 x 1.942 mm︱loading height 1.002 mm︱weight 1.332 kg︱tank capacity 600 l︱through-put width 307 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

swarf cleaner

total power requirement / kW︱weight of the machine ca. / t︱required space / m︱

---

sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱

---

Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

cleansing medium Wässriger Reiniger ︱filling amount 2400 l︱heating capacity 68 kW︱

---

In our opinion, the machine is in good used condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

temperature 80/130 °C︱0 100 kg︱filling capacity 750 l︱basket dimensions 670x480 mm︱number 25 ︱total power requirement 43 kW︱weight of the machine ca. 890 kg︱dimensions of the machine ca. 185x190x150 cm︱

---

0 20 l/min︱total power requirement 4 kW︱weight of the machine ca. t︱required space m︱

---

APRON CLEANER APRON CLEANER for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collection container with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 40°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment. for thorough cleaning and disinfection of aprons in meat processing plants. Application: the apron is held by the person cleaning it in a plastic funnel and sprayed with water in a targeted manner via movements using an integrated high-pressure pump with a capacity of 100 bar/water pressure, Even heavily soiled aprons are reliably cleaned in max. 15 seconds, meat residues and fibres are rinsed out of the butcher's apron, the high-pressure water jet is activated via a foot switch, cleaning or disinfecting agent is automatically added to the water via a dosing system to optimise the cleaning result. cleaning agent or disinfectant to the water via a dosing system, collecting tank with sliding lid for easy access for cleaning and maintenance work, including canister holder for cleaning agent for lateral mounting on the side of the housing. Electrical connection: 400 V/N/PE, 50/60 Hz, power consumption: 5.6 kW Water connection: 3/4" max. 65°C, min. 2.5 bar, water drain DN50, water connection min. 20 l/min, When connecting the machine to the drinking water system, an approved pipe isolator must be provided on site. Dimensions: (W x D x H): 800/1053 x 750 x 950/1480 mm The unit can be inspected under power near Ulm. Arrange an appointment.

weight max. in kg 3000 kg︱stroke 3000 mm︱height 2160 mm︱load center 500 mm︱total power requirement 10 kW︱weight 5500 kg︱

---

weight max. in kg 2500 kg︱stroke 3700 mm︱fork length 900 mm︱ Super elastic ︱battery Baujahr 2013 ︱construction height 2630 mm︱weight of the machine ca. t︱

---

Duplex / Free lift

weight max. in kg 2500 kg︱stroke 2900 mm︱fork length . mm︱Cabin ︱total power requirement kW︱weight of the machine ca. 3310 t︱dimensions of the machine ca. m︱

---

weight max. in kg 1100 kg︱stroke 4500 mm︱fork length 1200 mm︱height over floor 2060 mm︱dimensions 3,1 x 1,04 x 2,06 m︱weight of the machine ca. 3,14 t︱

---

Used 3 wheel eletro forklift - Triplex mast - side movement - charger 50 A - battery 50 A/ 400 Ah - front/back light, blinkers, stop lights - beacon - signal for reversing - signal horn - safety belt

lifting capacity 2,5 t. ︱Number of working hours 5380 h︱ 50 % ︱serial number G. E.F74 2,7 ︱

---

Lifting capacity 2.500 kg︱Lifting height 4.300 mm︱fork length 1.200 mm︱type 7 FB MF 25 ︱engine Electric ︱

---

Brand Toyota Machine no TR339 Type 7 FB MF 25 Year of make 2004 Machine dimensions (L×W×H) 3.600 x 1.160 x 2.200 mm Machine weight 3.240 kg Electric Lifting capacity 2500 kg Lifting height 4.300 mm Clearance height 2.200 mm Fork length 1.200 mm Fork carriage width 1.060 mm Mast type Triplo Massive tyres Ja Working hours: 10.025H

weight max. in kg - kg︱stroke - mm︱fork length 1.400 mm︱Lifting capacity 4.000 kg︱Lifting height 3.300 mm︱type Cascade ︱engine Perkins ︱

---

Brand Clark Type GPX 40 D Year of make 1996 Machine dimensions (L×W×H) 4.500 x 1.300 x 2.250 mm Machine weight 6.000 kg Diesel Lifting capacity 4.000 kg Lifting capacity increased to 5 T Lifting height 3.300 mm Clearance height 2.250 mm Fork length 1.400 mm Fork carriage width 1.250 mm Side shift Mast type Cascade Massive tyres Ja Engine Perkins

weight max. in kg 5000 kg︱stroke 3300 mm︱

---

weight max. in kg - kg︱stroke - mm︱fork length 1.060 mm︱Lifting capacity 1.500 kg︱Lifting height 3.750 mm︱

---

Brand TCM Type FB15-6 Machine dimensions (L×W×H) 3.050 x 1.120 x 2.250 mm Electric Lifting capacity 1.500 kg Lifting height 3.750 mm Clearance height 2.250 mm Fork length 1.060 mm Fork carriage width 920 mm Massive tyres Ja