Glazing bead sww
Machinelist: Glazing bead sww
Frame press
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6794 · Frame press
S&S - Bavaria 2000 L - Video - - Vorführpresse -
Technical details
S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6792 · Frame press
S&S - RP 2000 - - Vorführmaschine -
Technical details
S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5956 · Frame press
S&S - Multipress Lochplattenpresse - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5845 · Frame press
S&S - RP 2000 - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6030 · Frame press
S&S - T 35 - - neu -
Technical details
Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6121 · Frame press
S&S - Super-Video - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6496 · Frame press
S&S - Bavaria 2000 L -Video - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6803 · Frame press
SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -
Technical details
S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
2.000 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2719 · Frame press
HESS - Speedy Video - - gebraucht -
Technical details
Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2701 · Frame press
HESS - Quickstep_Video - - gebraucht - Siemens S7-1200
Technical details
#2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2730 · Frame press
HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -
Technical details
Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6821 · Frame press
CASOLIN - Euro - - 2010 -
Technical details
Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
20.000 €
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6822 · Frame press
MAWEG - Euronova Qickomat - - 1996 -
Technical details
Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6810 · Frame press
MAWEG HILDEBRAND - Euro-Z - - 1990 -
Technical details
Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
Glazing bead sww
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2718 · Glazing bead sww
HECHT - Exenso DS350E - Video - - - Vorführmaschine - ja/CNC
Technical details
HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15" display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - incl. Control cabinet, motor and software licenses. Pos. 1.2 article number 942.5997 DS feed device pneumatic Pos. 1.3 article number 942.5236 DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - torsion-proof clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety preload pressure Scope of delivery: 1 swing clamp / 1 horizontal clamp Pos. 1.4 article number 723.0121 DS saw blade HM 350x3.0/2.2/30 Z 100 (wood G5) Helical/ helical/flat tooth - positive Pos. 1.5 article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders secured against rotation - 2 cylinder holders with clamping lever Pos. 1.6 article number 942.5241 DS350 Table Pads Grooved "Standard" Pos. 1.7 article number 942.5237 DS Software "Excess length" (subsequent steps must be confirmed) Process control including hardware. After entering a cutting size > max. cutting length of the system, the cutting is cycled. (Left unit cuts, right unit shifts the material and cuts made to measure.) Article number 945.2007 Packaging DS350 (transport frame) ----------------------------------------------------- Total price in this version - on request! Options with extra charge on request: ----------------------------------- Article number 944.1023 GMF vernier caliper 3000mm complete set (1500mm plus extension 1500mm) including charger and receiver. A robust aluminum measuring bar with a measuring range of 3,000 mm ideal for measuring the glazing beads. functionality For use on doors and large window sashes, the vernier caliper GMF safely and quickly mechanically extended up to a measuring length of 3,000 mm will. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1mm Resolution of 0.02mm. Measurement transmission via radio interface to the controller or to the PC. Microcontroller charger for battery pack 100-240V input voltage and Euro/UK/US/AUS power adapter. Article number 945.2006 Packaging GMF tube Ø220x2000 mm Article number 942.5241 DS350 Table Pads Grooved according to customer's sample The mounted table pads are made according to the customer's drawing milled Control by your window construction software: -------------------------------------- No problem: Hecht's software department will also help you with customization of your existing data record for transfer to the saw! Price based on effort, please ask us! For our new machine offers, please also note options such as Working length 4,000 mm Hydro-pneumatic saw feed (for aluminium) Spray device for aluminum saws radio measuring stick and much more! (Technical information according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6760 · Glazing bead sww
RUCHSER - RU-GL-45° - - neu - ,
Technical details
RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 x 70 mm (W x H) !!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually movably mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6761 · Glazing bead sww
RUCHSER - RU-GL-45° - - neu - ,
Technical details
Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250mm, length 3700mm, width 700mm, Voltage 400V ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6842 · Glazing bead sww
STRIFFLER - 2750 E - - gebraucht - ja 0
Technical details
STRIFFLER double glass bead miter saw 2750 E --------------------------------- with electronic positioning device Cutting length in special version: 2200 mm Min. cutting length: 254 mm Saw feed is pneumatic, infinitely adjustable with oil brake cylinder Length adjustment by recirculating ball - threaded spindle - servo Motor drive and electric. Positioning device Cutting angles 90° and 45° against adjustable fixed stops, Intermediate positions adjustable according to scale. Clamping device from the front up to a maximum workpiece thickness of 65 mm Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm up to a maximum workpiece height of 50 mm Connection for suction diameter 50 mm Electrical connection: 3 m cable for 380 volt, 6.0 amp plug. Electrical circuit: Control cabinet with main switch, push button for: Control on, saw motors, dead man button for 500 mm Danger area, EMERGENCY STOP, El. Pos. Device, connection cable Longitudinal drive: positioning motor 0.25 KW with brake, Travel speed 7 m/min. Saw blade drive: 2 x 1.1 KW three-phase motors 2,800 rpm via V-belt = 5,000 rpm Saw blades: HM equipped, D = 250 mm, bore 20 mm, Wing measuring stick Weight approx. 450 kg -------------------------------- Price of the above machine on request! -------------------------------- (technical data according to manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2726 · Glazing bead sww
Wegoma -STRIMA - 2750 - - gebraucht - ja
Technical details
Glass bead saw Striffler-Strima 2750 --------------------------------- Saw blade diameter: 250 mm Distance sawing max 90°: 2,800 mm Cutting height at 90°: 80 mm Cutting width: 2,200 mm Cutting height at 45°: 28 mm Distance sawing min. 90°: 260 mm Saw blades tilt up to: 45° Main engine: 1.1 kW Saw blades tiltable: Yes Pneumatic clamp: Yes Control: program control Execution: cutting from behind Width adjustment: electric motor Weight approx.: 400 kg CE mark: Yes Space requirement: Length: 3,250mm Width: 1,200 mm Height: 1,100mm --------------------------------- (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
TOP Manufacturer:
RUCHSER - STRIFFLER - HECHT - WEGOMA -STRIMA -