Glazing bead sww
Machinelist: Glazing bead sww
Transport system
- Jansen Machinehandel BV
- Bredaseweg 210
- 4873 LA Etten-leur
- Nederland
-
+31 (0) 76 5015750
-
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
#2049-M822 · Transport system
NN - N150/RTF - - 1997 -
Technical details
Motor: 3,23 kW Throw-in opening 1,200 x 500 mm Transport height: 2,000 mm incl. cooling pump Chip conveyor
Glazing bead sww
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2718 · Glazing bead sww
HECHT - Exenso DS350E - Video - - - Vorführmaschine - ja/CNC
Technical details
HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15" display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - incl. Control cabinet, motor and software licenses. Pos. 1.2 article number 942.5997 DS feed device pneumatic Pos. 1.3 article number 942.5236 DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - torsion-proof clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety preload pressure Scope of delivery: 1 swing clamp / 1 horizontal clamp Pos. 1.4 article number 723.0121 DS saw blade HM 350x3.0/2.2/30 Z 100 (wood G5) Helical/ helical/flat tooth - positive Pos. 1.5 article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders secured against rotation - 2 cylinder holders with clamping lever Pos. 1.6 article number 942.5241 DS350 Table Pads Grooved "Standard" Pos. 1.7 article number 942.5237 DS Software "Excess length" (subsequent steps must be confirmed) Process control including hardware. After entering a cutting size > max. cutting length of the system, the cutting is cycled. (Left unit cuts, right unit shifts the material and cuts made to measure.) Article number 945.2007 Packaging DS350 (transport frame) ----------------------------------------------------- Total price in this version - on request! Options with extra charge on request: ----------------------------------- Article number 944.1023 GMF vernier caliper 3000mm complete set (1500mm plus extension 1500mm) including charger and receiver. A robust aluminum measuring bar with a measuring range of 3,000 mm ideal for measuring the glazing beads. functionality For use on doors and large window sashes, the vernier caliper GMF safely and quickly mechanically extended up to a measuring length of 3,000 mm will. Base length: 1,500 mm Extension: 1,500 mm, automatic detection Accuracy of ±0.1mm Resolution of 0.02mm. Measurement transmission via radio interface to the controller or to the PC. Microcontroller charger for battery pack 100-240V input voltage and Euro/UK/US/AUS power adapter. Article number 945.2006 Packaging GMF tube Ø220x2000 mm Article number 942.5241 DS350 Table Pads Grooved according to customer's sample The mounted table pads are made according to the customer's drawing milled Control by your window construction software: -------------------------------------- No problem: Hecht's software department will also help you with customization of your existing data record for transfer to the saw! Price based on effort, please ask us! For our new machine offers, please also note options such as Working length 4,000 mm Hydro-pneumatic saw feed (for aluminium) Spray device for aluminum saws radio measuring stick and much more! (Technical information according to the manufacturer - without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6760 · Glazing bead sww
RUCHSER - RU-GL-45° - - neu - ,
Technical details
RUCHSER RU-GL-45° ----------------------------------------------------- Glazing bead saw at the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuck right saw on carriage mounted to be moved manually. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000 ----------------------------------------------------- for glazing beads up to 30 x 70 mm (W x H) !!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually movably mounted. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6761 · Glazing bead sww
RUCHSER - RU-GL-45° - - neu - ,
Technical details
Ruchser RU-GLS-ED 45° glass bead saw -------------------------------------- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. the Machine was designed for cutting glazing beads in pairs with a cutting angle of 45° and features a fixed and a movable saw unit. The manual length adjustment is equipped with an electrical digital display. It can cut lengths from 240mm - 2650mm be sawn. During the cutting process, the glazing beads with a pneumatic clamping device clamped from above and from the front to prevent tilting to prevent the glazing beads. Operation is via a safety two-hand operation Item 1: RU-GLS-ED45° double glazing bead saw ----------------------------------------------------- with manual measurement, for the pairwise Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250mm, length 3700mm, width 700mm, Voltage 400V ----------------------------------------------------- Basic price in the above version: on request! ----------------------------------------------------- Ex works. Plus packaging and shipping and current Material cost surcharge of 6% of the gross price Options with additional costs: ----------------------------------------------------- Item 1.1 Set of shims for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of supplements are required. To determine the exact number to be able to we need profile drawings before order confirmation the glazing beads to be used. Surcharge: on request, after sending your glazing bead drawings Pos. 1.2 recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Surcharge: 539.00 euros Pos. 1.3 Feeler gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 421.00 euros Pos. 1.4 Feeler gauge for glazing beads, overall length 1500 mm, max. scanning length approx. 1430 mm Gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length Surcharge: 378.00 euros Pos. 1.5 operating time switching device for independent suction. Adjustable from 5 sec. up to 3 hours with each sawing process automatically becomes the set time sucked off. Will be repeated within the suction time sawn, the set suction time begins again from the beginning. Surcharge: 620.00 euros All prices in euros, net, plus statutory VAT (technical information according to the manufacturer, without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6842 · Glazing bead sww
STRIFFLER - 2750 E - - gebraucht - ja 0
Technical details
STRIFFLER double glass bead miter saw 2750 E --------------------------------- with electronic positioning device Cutting length in special version: 2200 mm Min. cutting length: 254 mm Saw feed is pneumatic, infinitely adjustable with oil brake cylinder Length adjustment by recirculating ball - threaded spindle - servo Motor drive and electric. Positioning device Cutting angles 90° and 45° against adjustable fixed stops, Intermediate positions adjustable according to scale. Clamping device from the front up to a maximum workpiece thickness of 65 mm Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm up to a maximum workpiece height of 50 mm Connection for suction diameter 50 mm Electrical connection: 3 m cable for 380 volt, 6.0 amp plug. Electrical circuit: Control cabinet with main switch, push button for: Control on, saw motors, dead man button for 500 mm Danger area, EMERGENCY STOP, El. Pos. Device, connection cable Longitudinal drive: positioning motor 0.25 KW with brake, Travel speed 7 m/min. Saw blade drive: 2 x 1.1 KW three-phase motors 2,800 rpm via V-belt = 5,000 rpm Saw blades: HM equipped, D = 250 mm, bore 20 mm, Wing measuring stick Weight approx. 450 kg -------------------------------- Price of the above machine on request! -------------------------------- (technical data according to manufacturer - no guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2726 · Glazing bead sww
Wegoma -STRIMA - 2750 - - gebraucht - ja
Technical details
Glass bead saw Striffler-Strima 2750 --------------------------------- Saw blade diameter: 250 mm Distance sawing max 90°: 2,800 mm Cutting height at 90°: 80 mm Cutting width: 2,200 mm Cutting height at 45°: 28 mm Distance sawing min. 90°: 260 mm Saw blades tilt up to: 45° Main engine: 1.1 kW Saw blades tiltable: Yes Pneumatic clamp: Yes Control: program control Execution: cutting from behind Width adjustment: electric motor Weight approx.: 400 kg CE mark: Yes Space requirement: Length: 3,250mm Width: 1,200 mm Height: 1,100mm --------------------------------- (technical data according to the manufacturer - no guarantee!)
Datasheet
Request / Contact
Transport system
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5943 · Transport system
HABERKORN - Beladefoerderer - Video - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5779 · Transport system
HABERKORN - Rueckfoerderer mit GLS Abwurf - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5745 · Transport system
HABERKORN - Foerderanlage nach Fluttunnel - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6109 · Transport system
FRAMATECH - Leichtschwenkkran mit Lift - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6049 · Transport system
HABERKORN - Ruecklauf fuer Umfaelzmaschine - - neu -
Technical details
Haberkorn return means for Umfälzautomat ************************************************** ********* For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 mm stroke Roller diameter 80 mm Rollers with PVC coating Synchronous storage of GG 25 hardened gears and rods 2 pneumatic cylinder 80 x 100 mm adjustable stops (top - down ) Synchronization via shafts and bevel gears 3 longitudinal conveyor for transport back ---------------------------------------------- Conveyor belts with polyester coated tread 50 mm wide, made in plastic guides Drive with spur gear motor 0.37 KW , about 5-30 m / min. Wing with more than 3000 mm can use the Be bypassed operator. control -------------- Siemens S 7, 24 VDC optical limit switches E-stop loop Fully installed with 16 A Euro plug 400 V AC, 2.5 KW, 50 Hz Color: --------- RAL 7035 light gray Construction , commissioning and instruction EUR 980,00 (technical details according to manufacturer - without guarantee ! )
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-5375 · Transport system
HABERKORN - Ruecktransport_back transport - - neu -
Technical details
Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - angetriebenes Band ca. 5-25 m/min - Bandbreite 260 mm - Antrieb über Getriebemotor - Förderband auf Lenkrollen mit Bremse - Rollenabdeckung nach HBG Steuerung: Siemens LOGO 24 RCo, 24 V DC, optische Endschalter, Not-Aus-Schleife Fertig installiert mit 16A Eurostecker Anschluß: 400 V AC, 2,0 KW, 50 Hz Pneumatik: 6-8 bar, Verbrauch ca.12NL/min Farbe : RAL 7035 hellgrau CE nach EN 292 Teil1, EN 292 Teil 2, EN 294, EN 349, EN 418, EN 602-1EG Maschinenrichtlinie 89/392/EWG , EG Niederspannungsrichtlinie 73/23 /EWG Genannte Preise ab Werk zzgl. Verpackungs- und Transportkosten (Techn. Angaben laut Hersteller ohne Gewähr!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-662 · Transport system
HABERKORN - RFA - - neu -
Technical details
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-6770 · Transport system
HABERKORN - Ruecktransport - - Neu -
Technical details
Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ---------------------------------------------- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ---------------------------------------------- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ---------------------------------------------- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ---------------------------------------------- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ---------------------------------------------- Price of the above version ex works: on request! plus packaging and transport costs ---------------------------------------------- (Technical information according to the manufacturer without guarantee!)
Datasheet
Request / Contact
- Engelfried Maschinentechnik GmbH
- Elisabethenstr. 41
- 73432 Aalen
- Deutschland
-
(0049)07361-98660
(0049)07361-986640 -
info@engelfried.com
www.engelfried.com
#1305-2361 · Transport system
WEINIG - DEF 25 - - gebraucht -
Technical details
Weinig pressure conveying system DEF 25 to the operator in working height for Unicontrol Length 2000 mm Depth 1800 mm Brand width 250 mm Rear roller conveyor not driven 2500 mm Roll width 250 mm (technical details according to manufacturer - without guarantee.)
Datasheet
Request / Contact
TOP Manufacturer:
RUCHSER - WEGOMA -STRIMA - STRIFFLER - HECHT -