,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Outside profiling machine

          Machinelist: Outside profiling machine


          Frame press

          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6794 · Frame press

          S&S - Bavaria 2000 L - Video - - Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1350x3550 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ------------------------ Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: - lower insertion height for sashes with width <550 mm; approx. 1280 mm - Insertion height upper edge of upper horizontal frame wood up to pressing height 2,750mm; approx. 1,620 mm - Insertion height upper edge of upper horizontal frame wood pressing height >2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm Item 00001147 ------------------------ 1 medium pressure bar complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 00000112 ----------------------- infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for transverse pressure device Pressure control range up to max. 100 bar (For pressing crossbar windows) Item 000000391 --------------------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Shut-off valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plates attachable for pressing up to 60 degrees Item 00000631 ----------------------- double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for small dimension pressing for bridging the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and additional pressing cycle for pressing "dowel connection" or "Plugtec", changeable via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000632 ----------------------- Electronic pressure preselection device For 4 different, permanently programmed pressure levels (can be changed at any time), and an additional freely selectable one Pressure level directly on the control panel Item 00001002 ----------------------- 6x printing unit support and printing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and abutments covered with plastic --------------------------------- Total price in the above version: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price per piece: 260.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1350x3550 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L
            ---------------------------------

            With automatic pressing cycle + manual control
            for corner connections tenon + slots and dowel connection / mortised tenon,
            can be changed using a selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles if the sash is on
            loose part to be folded over.

            CE version
            Basic machine in the strongest welded frame,
            with thick-walled special hollow profiles.
            Guideways of the pressure bars for the press corners
            in a low-abrasion finish.

            Fast, smooth, manual width adjustment
            by ball-bearing carriage, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping (surcharge).

            Height adjustment and pressing by long-stroke cylinder
            in one work cycle. Right-hand press corners with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal printing cylinders
            necessary, avoiding cylinder collisions.
            Abutments below in several positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure control
            from 20 - 120 bar, manometer

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Adjusted working height, piston diameter 60 mm
            Pressure force per cylinder max. 2100 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1250 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the machine base on the left, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: length x height = 4,500 mm x 2,750 mm
            A notice:
            actual working size: 4,500 x 3,000 mm (length x height=
            Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height)

            Item 0000127
            ------------------------
            Press height modification 2750/3000 mm a
            The machine is supplied with a 3,000 mm high pressure bar
            The cylinder attachment and the positions of the lower press corners
            however, correspond to the version with a press height of 2,750 mm.
            By installing 3 pieces of 300 mm long piston rod extensions
            the max. pressing height can be increased to 3,000 mm.
            Using the tools provided, it is possible to convert the
            Machine possible within approx. 10 minutes.

            Insertion heights:
            - lower insertion height for sashes with width <550 mm; approx. 1280 mm
            - Insertion height upper edge of upper horizontal frame wood up to pressing
            height
            2,750mm; approx. 1,620 mm
            - Insertion height upper edge of upper horizontal frame wood pressing height
            >2,750mm; approx. 1,920 mm (piston rod extension installed)

            Scope of delivery:
            1 piece support plate
            3 piston rod extensions 300 mm
            1 open-end wrench size 30
            1 ratchet with socket wrench size. 24
            1 piece holder for piston rod extensions and tool

            Hints:
            - The height is corrected for machines with a positioning function
            by parameter switching. Operation of the machine with the
            built-in piston rod extensions is replaced by another
            wallpaper displayed.

            - Total height of the machine approx. 3,400 mm

            Item 00001147
            ------------------------
            1 medium pressure bar complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 00000112
            -----------------------
            infinitely height-adjustable transverse pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for transverse pressure device
            Pressure control range up to max. 100 bar
            (For pressing crossbar windows)

            Item 000000391
            ---------------------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Shut-off valve on the upper horizontal cylinder


            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plates attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for small dimension pressing
            for bridging the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and additional pressing cycle
            for pressing "dowel connection" or
            "Plugtec", changeable via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000632
            -----------------------
            Electronic pressure preselection device
            For 4 different, permanently programmed pressure levels
            (can be changed at any time), and an additional freely selectable one
            Pressure level directly on the control panel

            Item 00001002
            -----------------------
            6x printing unit support and printing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and abutments covered with plastic

            ---------------------------------
            Total price in the above version: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price per piece: 260.00 euros

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6792 · Frame press

          S&S - RP 2000 - - Vorführmaschine -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3330 mm︱
          S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: -------------------------------------- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 00000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) -------------------------------------- Total price in the above version ex works: On request! -------------------------------------- Options: Article 00000042 1.00 pc Machine that can be dismantled i.e. H. Pressure bar on pallet -------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3330 mm
            Description :
            S&S frame press type RP 2000,
            -----------------------------
            C E - version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure bar with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinder on special pressure bar with one-hand quick adjustment
            with weight compensation in the 50 mm hole pattern, height-adjustable, long
            Sliding carriages ensure the
            permanent absorption of high pressing forces.
            Fast, smooth width adjustment with ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder infinitely adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with center holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterweight and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            weight balancing; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey

            Working size: 4000mm x 2600mm (length x height)
            Required space: 5300 x 1250 x 3330 mm (L x W x H)

            Machine including the following options:
            --------------------------------------

            Article 00000374 1.00 pc
            Medium pressure bar with pressure cylinder
            double-acting, weight compensation,
            pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bar,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000038 1.00 pc
            Cross printing device complete with pressure cylinder
            double-acting, weight compensation, pressure hose
            and shut-off valve
            There is no weight compensation on the lower horizontal cylinder

            Article 00000048 1.00 pc
            Individual pressure control for transverse pressure device,
            Pressure control range up to max. 100 bar
            (for pressing crossbar windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width allowance for compression
            of small frames to bridge the
            1st pressure beam, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles
            The space required in height increases by 100 mm

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            double pendulum pressure plate
            for pointed windows (triangle)

            --------------------------------------

            Total price in the above version ex works: On request!

            --------------------------------------
            Options:
            Article 00000042 1.00 pc
            Machine that can be dismantled
            i.e. H. Pressure bar on pallet
            --------------------------------------

            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Illustrations may be dated
            Deviate from the original, prices net, plus VAT (domestic))


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L  -Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria 2000 L -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
            Description :



        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER RP 1200


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6803 · Frame press

          SCHAFBERGER + SPROEDHUBER - RP 1200 - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱
          S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            Description :
            S+S hydraulic frame press RP 1200
            -------------------------------------
            Working width 3,550 mm
            Working height 2,250 mm
            -------------------------------------
            with medium pressure beam
            -------------------------------------
            still in use
            -------------------------------------

            Technical information according to the manufacturer - without guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2719 · Frame press

          HESS - Speedy Video - - gebraucht -

          Technical details
          Working width 3550 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 4500 x 900 x 2600 mm︱
          Hess Speedy frame press -------------------------------------- Press will be checekd Insertion dimension / pressing length max. 3,550 mm Insertion dimension / pressing height max. 2,250 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for studio window gluing 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Photo and video not original, shows press of same type. (technical data according to the manufacturer - no guarantee!)
            Working width 3550 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 4500 x 900 x 2600 mm
            Description :
            Hess Speedy frame press
            --------------------------------------
            Press will be checekd

            Insertion dimension / pressing length max. 3,550 mm
            Insertion dimension / pressing height max. 2,250 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            3 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm
            Pressure force per cylinder 1250 kN / 12500 N

            Printing plate depth 100 mm width 140 mm

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 2.2 kW / 400V

            Control for studio window gluing

            2 pendulum pressure plates 45 degrees

            Machine dimensions W=4500 mm, D=900 mm, H=2600 mm
            Weight approx. 1800 kg

            Photo and video not original, shows press of same type.

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Quickstep_Video


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2701 · Frame press

          HESS - Quickstep_Video - - gebraucht - Siemens S7-1200

          Technical details
          Working width 3500 mm︱Working height 2250 mm︱Number of cylinders 5 St.︱control Siemens S7-1200
          #2701 Hess Quickstep frame press -------------------------------------- Technical data summary (please inquire about any additional accessories included) -------------------------------------- Generally -------------------------------------- Working width: 3500 mm Working height: 2250 mm Total power requirement: 3 kW Installation dimensions: 4500x980x2610 mm Loading dimensions: 4500 x 980 x 2610 mm Machine weight, approx.: 2000 kg Characteristics: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long-stroke cylinder) > Horizontal adjustment type: electrical > 1 medium pressure bar > Printing plate depth 100mm width 140mm > 3 pcs. pendulum pressure plates > 1 piece small parts allowance Other features -------------------------------------- Opto-electronics, i.e. fully automatic measurement and setting, horizontal Siemens S7-1200 control (technical information according to the manufacturer - no guarantee!) Pictures and video show the original press stock number 2701.
            Working width 3500 mm
            Working height 2250 mm
            Number of cylinders 5 St.
            control Siemens S7-1200
            Description :
            #2701 Hess Quickstep frame press
            --------------------------------------

            Technical data summary
            (please inquire about any additional accessories included)
            --------------------------------------

            Generally
            --------------------------------------
            Working width: 3500 mm
            Working height: 2250 mm
            Total power requirement: 3 kW
            Installation dimensions: 4500x980x2610 mm
            Loading dimensions: 4500 x 980 x 2610 mm
            Machine weight, approx.: 2000 kg

            Characteristics:
            --------------------------------------
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of horizontal press cylinders: 2
            > Vertical adjustment type: electric (long-stroke cylinder)
            > Horizontal adjustment type: electrical
            > 1 medium pressure bar
            > Printing plate depth 100mm width 140mm
            > 3 pcs. pendulum pressure plates
            > 1 piece small parts allowance

            Other features
            --------------------------------------
            Opto-electronics, i.e. fully automatic measurement
            and setting, horizontal

            Siemens S7-1200 control

            (technical information according to the manufacturer - no guarantee!)

            Pictures and video show the original press stock number 2701.


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy, 2 Mitteldruckbalken


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2730 · Frame press

          HESS - Speedy, 2 Mitteldruckbalken - - gebraucht -

          Technical details
          Working width 3050 mm︱Working height 2050 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 3970x950x2400 mm︱
          Hess Speedy frame press with 2 medium pressure beams! -------------------------------------- Insertion dimension / pressing length max. 3,050 mm Insertion dimension / pressing height max. 2,050 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 4 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 3.0 kW / 400V Machine dimensions W=3970 mm, D=950 mm, H=2400 mm Weight approx. 1680 kg Machine is currently being checked - picture not original, shows same model. Video shows press from our archive (technical data according to the manufacturer - no guarantee!)
            Working width 3050 mm
            Working height 2050 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 3970x950x2400 mm
            Description :
            Hess Speedy frame press with 2 medium pressure beams!
            --------------------------------------

            Insertion dimension / pressing length max. 3,050 mm
            Insertion dimension / pressing height max. 2,050 mm


            Sliding carriage for width adjustment locking in 50 mm
            Double hole grid system

            Electric height adjustment of the long-stroke cylinders (hydraulic)

            Insertion height of the abutment plates can be preselected in 4 positions

            4 vertical printing cylinders stroke 1000 mm
            Pressure force per cylinder 2000 kN / 20000 N

            2 horizontal printing cylinders stroke 80 mm

            Pressure force per cylinder 1250 kN / 12500 N

            Grid for cylinder fixation/rear bearing 50 mm

            Medium pressure beam with shut-off valve

            Final pressure switch-off and pressure control

            Control and pressing process in touch button operation

            Adjustable pressing pressure min. 25 – max. 160 bar

            Electrical connection 3.0 kW / 400V

            Machine dimensions W=3970 mm, D=950 mm, H=2400 mm
            Weight approx. 1680 kg

            Machine is currently being checked - picture not original, shows same model.
            Video shows press from our archive

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press CASOLIN Euro


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6821 · Frame press

          CASOLIN - Euro - - 2010 -

          Technical details
          Working width 6000 mm︱Working height 3000 mm︱Number of cylinders 4 St.︱loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm︱weight 3700 kg︱
          Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO" Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!)
            Working width 6000 mm
            Working height 3000 mm
            Number of cylinders 4 St.
            loading dimensions L x W x H 7.175 x 1.600 x 3.790 mm
            weight 3700 kg
            Description :
            Casolin Euro
            -------------------------
            HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. "EURO"

            Frame press in an extremely stable steel construction. The machine also allows
            the pressing of already milled wing and frame parts.

            Working dimensions: 6000mm x 3000mm

            Installation dimensions:
            Total length: approx. 7,175 mm
            Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed
            maximum pressing height above) = 4,130 mm

            Loading dimensions:
            Length: approx. 7,175 mm
            Height: approx. 3,790 mm
            Weight: approx. 3,700 kg

            (technical data according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • 20.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG Euronova Qickomat


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6822 · Frame press

          MAWEG - Euronova Qickomat - - 1996 -

          Technical details
          Working width 3648 mm︱Working height 2485 mm︱Number of cylinders 6 St.︱
          Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!)
            Working width 3648 mm
            Working height 2485 mm
            Number of cylinders 6 St.
            Description :
            Maweg Euronova Quickomat frame press
            ----------------------------
            with automatic measurement adjustment.

            Cylinder max. opened (maximum working dimensions)
            W 3,648mm x H 2,485mm

            Total length: 4,720mm + 400mm control unit
            Total height: 3,550 mm

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Frame press MAWEG HILDEBRAND Euro-Z


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6810 · Frame press

          MAWEG HILDEBRAND - Euro-Z - - 1990 -

          Technical details
          Working width 3250 mm︱Working height 2300 mm︱Number of cylinders 7 St.︱Dimensions (L/W/H) 4400 x 1050 x 3200 mm︱loading dimensions L x W x H 4400 x 1050 x 2950 mm︱
          Maweg Hildebrand frame press EURO-Z -------------------------------------- Press with 2 medium pressure beams! External dimensions approx.: Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm Loading height: 2,950 mm Pressing dimensions: length = 3,250 mm, height = 2,300 mm Printing plates: depth=100 mm, width=120 mm Selling ex location as stated. You can see the press in use until around the end of January 2024. (technical information according to the manufacturer - no guarantee!)
            Working width 3250 mm
            Working height 2300 mm
            Number of cylinders 7 St.
            Dimensions (L/W/H) 4400 x 1050 x 3200 mm
            loading dimensions L x W x H 4400 x 1050 x 2950 mm
            Description :
            Maweg Hildebrand frame press EURO-Z
            --------------------------------------
            Press with 2 medium pressure beams!

            External dimensions approx.:
            Length = 4,400 mm, height = 3,200 mm, depth = 1,050 mm
            Loading height: 2,950 mm

            Pressing dimensions: length = 3,250 mm, height = 2,300 mm
            Printing plates: depth=100 mm, width=120 mm

            Selling ex location as stated.
            You can see the press in use until around the end of January 2024.

            (technical information according to the manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact

          Outside profiling machine

          used Window production: wood Outside profiling machine Okoma UF 2 EG mit Schleifeinheit


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6828 · Outside profiling machine

          Okoma - UF 2 EG mit Schleifeinheit - - gebraucht -

          Technical details
          Number of spindles 3 St.︱Number of tools 2/3 St.︱Spindle diameter 40/50 mm︱
          1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed ??7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Protective and suction hood with connecting piece 140 mm diameter. 3. Profile spindle 2: - Spindle arrangement: right - Power 11 kW - Speed ??7000 rpm - Direction of rotation: counter rotation - Spindle diameter 50 mm - Usable length 272 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 90 mm cycle for 3 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Protective and suction hood with connecting piece 140 mm diameter. 4. Fitting milling device EG: - Spindle arrangement on the right - Drive: three-phase motor 3 kW - Speed ??6000 rpm - Spindle diameter 30 mm - Usable length 47 mm - Vertical positioning: none - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch (rear only) - Protective and suction hood with connection piece 80mm diameter 5. Stop: - 1st stop: in front of spindle 1 manual chip removal Quick adjustment via. parallelogram - 2nd stop: between spindles 1 and 2 Chip removal: pneumatically adjustable - 3rd stop: after spindle 2 Fixed stop 6. Grinder with automatic immersion and immersion 7. Feed: - Roller distance from axle to axle 130 mm - Roll diameter 110 mm - Roll width 50 mm - Feed can be swiveled away - with pneumatic travel control 8. Support rail for milling: - Rail length: approx. 3000 mm - Adjustment range forward: approx. 100 - 600 mm 9. Electrical control: - Programmable logic controller: Siemens electronics PC control, 30 programs, 380 V., 50 Hz. - Power section: Siemens S 5 - Non-contact limit switches More pictures on request! --------------------------- (technical data according to manufacturer - no guarantee!)
            Number of spindles 3 St.
            Number of tools 2/3 St.
            Spindle diameter 40/50 mm
            Description :
            1 OKOMA folding machine model UF 2 EG
            -------------------------------------
            1. Energy data:

            - Operating voltage: 3 phases, 380 V, 50 Hz.
            - Compressed air: Air requirement: 13 NL/min.
            Operating pressure: 8 bar
            up. Air: according to Pneurop 6611

            2. Profile spindle 1:

            - Spindle arrangement: right
            - Power 11 kW
            - Speed ??7000 rpm
            - Direction of rotation: synchronous and counter rotation
            - Spindle diameter 40 mm
            - Usable length 252 mm
            - Tool diameter max. 230 mm
            - U-movement of the profile spindle
            - Positioning vertically
            Drive: pneumatic cylinder 120 mm cycle
            for 2 tool positions
            Position sensor: limit switch

            - Positioning horizontally
            Drive: Pneumatic cylinder forward-back
            Position sensor: limit switch

            - Automatic immersion: immersion speed can be regulated for tear-free
            Fold over

            - Protective and suction hood with connecting piece 140 mm diameter.

            3. Profile spindle 2:

            - Spindle arrangement: right
            - Power 11 kW
            - Speed ??7000 rpm
            - Direction of rotation: counter rotation
            - Spindle diameter 50 mm
            - Usable length 272 mm
            - Tool diameter max. 230 mm
            - U-movement of the profile spindle
            - Positioning vertically
            Drive: pneumatic cylinder 90 mm cycle
            for 3 tool positions
            Position sensor: limit switch

            - Positioning horizontally
            Drive: Pneumatic cylinder forward-back
            Position sensor: limit switch
            - Protective and suction hood with connecting piece 140 mm diameter.

            4. Fitting milling device EG:

            - Spindle arrangement on the right
            - Drive: three-phase motor 3 kW
            - Speed ??6000 rpm
            - Spindle diameter 30 mm
            - Usable length 47 mm

            - Vertical positioning: none
            - Positioning horizontally
            Drive: Pneumatic cylinder forward-back

            Position sensor: limit switch (rear only)

            - Protective and suction hood with connection piece
            80mm diameter

            5. Stop:

            - 1st stop: in front of spindle 1
            manual chip removal
            Quick adjustment via. parallelogram
            - 2nd stop: between spindles 1 and 2
            Chip removal: pneumatically adjustable
            - 3rd stop: after spindle 2
            Fixed stop

            6. Grinder with automatic immersion and immersion


            7. Feed:

            - Roller distance from axle to axle 130 mm
            - Roll diameter 110 mm
            - Roll width 50 mm
            - Feed can be swiveled away
            - with pneumatic travel control

            8. Support rail for milling:

            - Rail length: approx. 3000 mm
            - Adjustment range forward: approx. 100 - 600 mm

            9. Electrical control:

            - Programmable logic controller: Siemens electronics
            PC control, 30 programs, 380 V., 50 Hz.
            - Power section: Siemens S 5
            - Non-contact limit switches

            More pictures on request!
            ---------------------------
            (technical data according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Outside profiling machine WEINIG Univar 6 P


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-6827 · Outside profiling machine

          WEINIG - Univar 6 P - - gebraucht -

          Technical details
          Number of boring spindles 3 St.︱Number of tools 1.3/4.1. St.︱Spindle diameter 50,40 mm︱Spindle length 120,320,125 mm︱weight 2500 kg︱loading dimensions L x W x H 3800x1400x2000 mm︱table length 3470 mm︱
          Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 KW Speed: 6000 rpm Spindle diameter: 40mm Clamping height: 125 mm Tool flight circle: min. 140 mm; max. 180 mm Basic position below table level: 10 mm Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW Motor reinforcement for profiling spindle from 5.5 KW to 11 KW Screen controls for 99 window types. 1 type can hold up to 8 different parts contain. Manufacturing options: individual parts, milling. Data entry via Keyboard with integrated operator guidance and error diagnosis. Free-standing control cabinet --------------------------------- (technical data according to manufacturer - no guarantee!)
            Number of boring spindles 3 St.
            Number of tools 1.3/4.1. St.
            Spindle diameter 50,40 mm
            Spindle length 120,320,125 mm
            weight 2500 kg
            loading dimensions L x W x H 3800x1400x2000 mm
            table length 3470 mm
            Description :
            Weinig Univar 6 P
            In order to sell
            ----------------------
            Operating voltage: 380 volts, 50 periods.

            For milling around windows, doors and similar with uneven edges
            Profiles.

            Arrangement of the aggregates:
            1. Synchronous spindle on the right, pneumatically clocked.
            2. Profiling spindle on the right
            3. Fitting spindle

            Profiling spindle suitable for holding several tools one on top of the other.
            Spindle movement pneumatic.

            The 1 spindle works in synchronization for tear-free milling. Respectively
            This spindle plunges the last 100 mm of a frame end with the
            Insert the appropriate tool into the wood to prevent tearing at the frame
            corners
            avoid.

            Machine stands, tables, stops:
            Machine body made of heavy, torsion-free and vibration-damping
            elements. Stops on the right in the profiling area made of Pertinax. Before
            Profiling spindle a split stop with sliding bar for short parts.
            Additional opening rail for large format frames.

            Feed system:
            Continuous, chainless feed equipped with rubber rollers. Blow-off device
            for feed rollers and table.

            Spindles, hood:
            Spindles with high concentricity and dynamically balanced. Extraction hoods
            designed for the cheapest chip flow. Easiest tool change
            Quick-opening hood lid.

            Machine operation, setting aids:
            Operating the machine from the front. Setting the stops for
            Tool diameter using mechanical number display.

            Machine electrics, motors, controls:
            Electrical design according to DIN VDE 0113 - Electrical equipment from
            Industrial machines EN 60204 IEC 204-1.
            Further electrical regulations are not taken into account.

            Engines dynamically balanced.

            Control of tool positions via selector switch on the control panel.

            Tools:
            Machine equipped with operating tools, but without
            Editing tools.

            SPINDLE 1

            Synchronous spindle
            Number of tools: 1
            Spindle speed: 6000 rpm
            Spindle diameter: 50mm
            Tool clamping length: 120 mm
            Tool diameter max. (milling): 232 mm
            Tool zero flight circle: 112-140 mm
            Basic position under table: 10 mm
            Motor strength: 4 KW (5.5 KW)

            SPINDLE 2

            Number of tools: 4
            Spindle stroke vertical: 3 x 80 mm = 4 tools
            Can be switched to 2 x 95 mm = 3 tools
            Spindle speed: 6000 rpm
            Spindle diameter: 50mm
            Tool clamping length: 320 mm

            Feed profiling unit: 8 m/min
            Feed roller width: 50mm/35mm
            Feed roller diameter: 95 mm
            Stop height: 70 mm
            Working width: min. 30 mm; max. 220 mm
            Working height: min. 30 mm; max. 100mm
            Workpiece length without tenon: min. 245 mm


            Tool diameter max.
            For zero diameter 112 mm: 210 mm
            For zero diameter 140 mm: 232 mm

            Tool diameter max. (milling): 232 mm
            Tool zero flight circle: 112-140 mm
            Basic position under table: 10/5 mm
            Motor strength: Spindle: 11 KW Feed: 1.1 KW
            Feed profiling unit: continuously 6-12 m/min
            Feed roller width: 50 mm
            Feed roller diameter: 95 mm
            Stop height: 70 mm
            Working width: min. 30 mm; max. 220 mm
            Working height: min. 30 mm; max. 100mm
            Workpiece length without tenon: min. 245 mm

            Special equipment:

            3 Mechanical spindle brake for synchronous spindle, profiling spindle and
            Additional aggregates

            SPINDLE 3

            1 fitting milling unit, right: for milling the fitting groove in the
            Milling pass or for grooving in the longitudinal profile.
            Pneumatic horizontal movement with selector switch in the control panel.
            Motor power: 2.2 KW
            Speed: 6000 rpm
            Spindle diameter: 40mm
            Clamping height: 125 mm
            Tool flight circle: min. 140 mm; max. 180 mm
            Basic position below table level: 10 mm

            Motor reinforcement for synchronous spindle from 4 KW to 7.5 KW

            Motor reinforcement for profiling spindle from 5.5 KW to 11 KW

            Screen controls for 99 window types. 1 type can hold up to 8 different parts
            contain. Manufacturing options: individual parts, milling. Data entry via
            Keyboard with integrated operator guidance and error diagnosis.
            Free-standing control cabinet
            ---------------------------------

            (technical data according to manufacturer - no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Outside profiling machine WEINIG Univar 10/3


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-2706 · Outside profiling machine

          WEINIG - Univar 10/3 - - gebraucht -

          Technical details
          Number of spindles 4 St.︱Number of tools 11 St.︱Spindle diameter 50,40 mm︱Spindle length 285,125 mm︱length 4000 mm︱width 2000 mm︱height 2200 mm︱
          Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) -------------------------------------------------- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ---------------------- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ------------------------------------------------- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. Feed rollers - D : 95 mm Feed roller width 50/30 mm Feed roller spacing 100/120 mm -------------------------------- Screen control with 150 programs. 1 program is each 1 individual part and includes 2 end profiles and 1 longitudinal profile. Pro programs are for end processing 20 different profiles can be selected for Longitudinal machining of 40 different profiles 1 can be selected (in turning mode 2). When manufacturing, e.g. a frame, up to 8 different programs (parts) can be saved. The program memory can be organized so that up to 18 frames or sashes with a maximum of 8 parts each can be stored. Manufacturing options: - Individual parts - Double parts - frame by frame - in series - Milling Data entry via keyboard with integrated Operator guidance and error diagnosis. ---------------------------------- Length: 4000mm (Length of frame milling ruler: 4500 mm) Width: 2000mm Height: 2200mm (Technical information according to the manufacturer, no guarantee!)
            Number of spindles 4 St.
            Number of tools 11 St.
            Spindle diameter 50,40 mm
            Spindle length 285,125 mm
            length 4000 mm
            width 2000 mm
            height 2200 mm
            Description :
            Weinig Univar 10/3 folding machine
            ---------------------------------
            Machine will be cleaned and chcked before delivery

            For milling around windows, doors and the like with uneven
            circumferential profiles. Machine suitable for wood thickness 68 to 92 mm

            Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.

            The available tool positions are selected using a selector switch on the
            control panel
            retrieved.

            Machine with 3 hydraulically controlled right precision
            Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle
            The spindle stroke takes place in a U-movement, so that the opening is possible
            for short parts
            The milling stop remains as small as possible. Spindle stroke horizontally fine
            Adjustable for both tool positions from the operator side.
            Central lubrication for the spindle units.

            The 1.
            Spindle can be selected in right-left rotation.

            This spindle dips the last 100 mm of each frame end
            appropriate synchronization tool into the passing wood. Through this
            This prevents the tool of the subsequent milling spindle from running in the
            opposite direction
            working, causing tearouts. Excavation of the first 7 transport rollers using
            Footswitch. This shortens the lead time. An additional
            The support rail also allows large-format frames to be milled around.

            Continuous, chainless rubber roller feed with extreme
            short roller spacing. Height adjustment of the feed bar
            electrically readable.

            Electrical version according to VDE.

            Machine including operating tools, but without processing tools
            tools.

            Technical data:

            Working width min. 40 mm
            Working height min. 30 mm, max. 100 mm

            1. Profiling spindle (synchronous and counter-rotation)
            -------------------------------------------------- --
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm
            with synchronous automatic immersion

            2. Profiling spindle
            ----------------------
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm

            3. Profiling spindle
            ----------------------
            Motor strength lifting spindle 11.0 kW
            Spindle speed 6000 rpm
            Spindle diameter 50 mm
            Clamping length 285 mm
            Tool zero flight circle 112 - 140 mm
            Max. tool - D : 232 mm
            Spindle stroke vertical 2 x 95 mm for 3 tools
            Basic position under table 10 mm (adjustable up to 20 mm)
            Spindle stroke horizontal 80 mm

            4. Profile spindle - fitting unit on the right
            -------------------------------------------------
            For milling the fitting groove in the milling cycle
            or for grooving in the longitudinal profile.
            Pneumatic horizontal movement with
            Selector switch in the control panel.
            Motor 2.2 KW
            Speed 6,000 rpm
            Spindle diameter 40 mm
            Clamping height 125 mm, 2 tools
            Tool flight circle min. 140 mm, max. 180 mm

            Motor power feed 1.1 kW
            Feed speed 6 - 12 m/min.
            Feed rollers - D : 95 mm
            Feed roller width 50/30 mm
            Feed roller spacing 100/120 mm
            --------------------------------

            Screen control with 150 programs. 1 program
            is each 1 individual part and includes 2 end profiles
            and 1 longitudinal profile. Pro programs are for end processing
            20 different profiles can be selected for
            Longitudinal machining of 40 different profiles
            1 can be selected (in turning mode 2).

            When manufacturing, e.g. a frame, up to
            8 different programs (parts) can be saved.

            The program memory can be organized so that up to
            18 frames or sashes with a maximum of 8 parts each can be stored.

            Manufacturing options:
            - Individual parts
            - Double parts
            - frame by frame
            - in series
            - Milling

            Data entry via keyboard with integrated
            Operator guidance and error diagnosis.
            ----------------------------------
            Length: 4000mm
            (Length of frame milling ruler: 4500 mm)
            Width: 2000mm
            Height: 2200mm

            (Technical information according to the manufacturer, no guarantee!)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          WEINIG - OKOMA -