Bar Stock Carrier
Machinelist: Bar Stock Carrier
Bar Stock Carrier
- Mager & Wedemeyer
- Europaallee 24a
- 28309 Bremen
- Deutschland
-
+49 (0)421 - 33616-100
+49 (0)421 - 33616-169 -
jhagedorn@mager-wedemeyer.com
www.mager-wedemeyer.com
#1023-09212F · Bar Stock Carrier
BREUNING IRCO - ecoProfi 42.6 RK3 - 6000 III - - 2020 - SPS
Technical details
used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design
- MAMACH Machinenhandel BV
- Campagneweg 10
- 4761 RM Zevenbergen
- Niederlande
-
+31 (0)168325354
-
info@mamach.nl
www.mamach.nl
#2041-2777 · Bar Stock Carrier
LNS - Eco Load - - 2004 -
Technical details
- Stiens Werkzeugmaschinen GmbH
- Mittelweg 92
- 59302 Oelde
- Deutschland
-
+49 252283490
(0049) - 2522 - 8349-20 -
info@stiens.de
www.stiens.de
#1039-8361 · Bar Stock Carrier
BREUNING IRCO - Profimat 65.6 196.6 - - 2001 - SPS
Technical details
Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-03051 · Bar Stock Carrier
IRCO - ILS-RBE 7208 - - 1999 -
Technical details
= bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm
Datasheet
Request / Contact
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-03050 · Bar Stock Carrier
SYMCO - KH-16 - - 1999 -
Technical details
= bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
Datasheet
Request / Contact
- Detlef Jahn e. K.
- Gewerbepark 8
- 75331 Engelsbrand
- Deutschland
-
+49 (0)7235 974820
+49 (0)7235 9748224 -
info@langdreher.de
www.langdreher.de
#1092-02960 · Bar Stock Carrier
FMB - Turbo 3-26 - - 1998 -
Technical details
Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26
- Hans Klein Werkzeugmaschinenhandel GmbH
- Im Mühlgut 2-4
- 77815 Bühl
- Deutschland
-
0049 (0) 7223 9617-0
0049 (0) 7223 58512 -
info@klein-werkzeugmaschinen.de
www.klein-werkzeugmaschinen.de
#1052-03060 · Bar Stock Carrier
TRAUB - DNH 42/3000 - - 1998 -
Technical details
= bar loading magazine, compressed air controlled
Datasheet
Request / Contact
- Feyen Maschinen GmbH
- Gelleperstr. 10
- 47809 Krefeld
- Deutschland
-
0049 (0)2151/5267-0
0049 (0)2151/5267-39 -
info@feyen.de
www.feyen.de
#1053-002243 · Bar Stock Carrier
HYDROBAR - LNS - THB-42-2,4 - - 1996 -
Technical details
Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,
- Walter Kames GmbH
- Dillenburger Weg 34
- 40229 Düsseldorf
- Deutschland
-
+49 211 215066 0
+49 211 215067 -
info@kames.de
www.kames.de
#1004-00388 · Bar Stock Carrier
TRAUB - 45/26 - - 1984/96 -
Technical details
Faceplate
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23156 · Faceplate
LORENZ - Planscheibe LS630 - - unbekannt -
Technical details
Datasheet
Request / Contact
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23157 · Faceplate
LORENZ - Planscheibe - - unbekannt -
Technical details
Datasheet
Request / Contact
- EMUK GmbH Werkzeugmaschinen
- Siemensstrasse 24 a
- 76316 Malsch
- Deutschland
-
+49 (0) 7246 1392
+49 (0) 7246 1394 -
info@emuk.de
www.emuk.de
#1058-23162 · Faceplate
PFAUTER-GLEASON - Planscheibe Ø 450 mm - - unbekannt -
Technical details
Face plate, face plate chuck, four-jaw chuck, facing chuck For Gleason-Pfauter PE 500 with 6x T-slots 40x20 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1915 · Faceplate
UNBEKANNT - Ø450 mm - - unbekannt -
Technical details
Faceplate individually adjustable jaws Diameter: Ø450mm Chuck width: 110mm Passage: approx. 80 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1216 · Faceplate
UNBEKANNT - Ø650 mm - - unbekannt -
Technical details
Ø 350 mm Passage: 60 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1727 · Faceplate
UNBEKANNT - Ø550 mm - - unbekannt -
Technical details
Face plate individually adjustable Diameter: Ø550mm Chuck width: 100mm Passage: approx. 80mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-T1301 · Faceplate
UNBEKANNT - Ø350 mm - - unbekannt -
Technical details
Ø 350 mm Passage: 60 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-M1722 · Faceplate
- Ø350 mm - - unbekannt -
Technical details
Ø 350 mm Passage: 90 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1921 · Faceplate
UNBEKANNT - Ø480 mm - - unbekannt -
Technical details
Face plate four-jaw chuck Diameter: Ø480mm Lining width: approx. 110mm Passage: approx. 110 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1922 · Faceplate
UNBEKANNT - Ø550 mm - - unbekannt -
Technical details
Face plate four-jaw chuck Diameter: Ø550mm Chuck width: 105mm Passage: approx. 105 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1703 · Faceplate
ERL - Ø450 mm - - unbekannt -
Technical details
Diameter: Ø450mm Passage: 100mm Weight: about 30kg
Datasheet
Request / Contact
- WeMa Antonius Pigge GmbH
- Barnstorfer Str. 3
- 49424 Goldenstedt
- Deutschland
-
+49 (0)444496700
+49 (0)4444967010 -
info@wema-pigge.de
www.wema-pigge.de
#2031-3575 · Faceplate
Aufspannscheibe - 510 - - unbekannt -
Technical details
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-S1923 · Faceplate
FORKARDT - Ø650 mm - - unbekannt -
Technical details
Face plate individually adjustable Diameter: Ø550mm Chuck width: 100mm Passage: approx. 80mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-C1706 · Faceplate
UNBEKANNT - Ø450 mm - - unbekannt -
Technical details
Face plate four-jaw chuck Diameter: Ø450mm Weight: 50kg Passage: approx. 60 mm
Datasheet
Request / Contact
- ATMH Werkzeugmaschinenhandel GmbH
- Scharpenbergerstr.96-98
- 58256 Ennepetal
- Deutschland
-
+49 (0) 2333 / 403 43 70
+49 (0) 2333 / 403 43 75 -
info@atmh.de
www.atmh.de
#2065-H1075 · Faceplate
JIANHUA - Ø400 mm - - unbekannt -
Technical details
Make: Jianhua Diameter: Ø400mm Outlet: 120mm Chuck width: 95mm Weight: approx. 55kg
Datasheet
Request / Contact