Bar Stock Carrier

diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱

---

used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design

Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱

---

diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱

---

Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC

diameter 15 mm︱length 800 mm︱

---

= bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm

diameter 3 - 16 mm︱length 3000 mm︱

---

= bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø

diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱

---

Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26

bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱

---

= bar loading magazine, compressed air controlled

diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱

---

Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,

diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱

---

plate width 2000 mm︱plate depth 6000 mm︱plate height 400 mm︱

---

Boring plate - milling table - T-slot plate Clamping plate Rübenach Bonn Beuel 6000 x 2000 x 400 Number of grooves: 24x8 Edge distance long side: 110mm Edge distance width side side: 110mm Groove distance: 28mm Distance from groove to groove long side: 220mm Distance from slot to slot width side: 220mm

plate width 1600 mm︱plate depth 2000 mm︱plate height 100 mm︱

---

Length: 2000mm Width: 1600mm Thickness: 100mmThread: M20 Bore position: 60mm 7 pieces available

plate width 900 mm︱plate depth 1200 mm︱plate height 45 mm︱weight of the machine ca. 300 kg︱

---

plate width 1860 mm︱plate depth 1100 mm︱plate height 100 mm︱weight of the machine ca. 1,2 t︱

---

plate width 900 mm︱plate depth 1600 mm︱plate height 70 mm︱weight of the machine ca. / kg︱

---

plate width 1500 mm︱plate depth 3500 mm︱plate height 250 mm︱weight 3400 kg︱ 100 ︱no. of flutes 6 ︱flute distance 220 ︱groove width 28 mm︱

---

plate width 2510 mm︱plate depth 5135 mm︱plate height 345 mm︱weight ca. 10 t︱required space 2,5 x 5,1 x 0,38 m︱

---

plate width 3000 mm︱plate depth 6000 mm︱plate height 290 mm︱weight 12390 kg︱flute distance 150 mm︱no. of flutes 19 Nuten︱

---

dimension of the T-slots; 28 x 49mm - Height: 50mm

plate width 500 mm︱plate depth 500 mm︱plate height / mm︱

---

plate width 900 mm︱plate depth 1200 mm︱plate height 50 mm︱weight of the machine ca. / kg︱

---

plate width 3500 mm︱plate depth 1500 mm︱plate height 250 mm︱weight 3400 kg︱flute distance 220 ︱ 100 mm︱no. of flutes 6 ︱groove width 28 mm︱

---

plate width 610 mm︱plate depth 1500 mm︱plate height 70 mm︱weight of the machine ca. / kg︱

---

plate width 645 mm︱plate depth 845 mm︱plate height 50 mm︱weight ca. 200 kg︱

---

LxWxH: 845x645x50 mm Weight: approx. 200 kg 3 identical clamping plates are available.

plate width 2000 mm︱plate depth 3800 mm︱plate height 300 mm︱weight of the machine ca. 5,5 t︱

---

plate width 500 mm︱plate depth 1200 mm︱plate height 50 mm︱weight of the machine ca. 180 kg︱

---