,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Bar Stock Carrier

          Machinelist: Bar Stock Carrier


          Bar Stock Carrier

          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO ecoProfi 42.6 RK3 - 6000 III


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09212F · Bar Stock Carrier

          BREUNING IRCO - ecoProfi 42.6 RK3 - 6000 III - - 2020 - SPS

          Technical details
          diameter 5 - max. 51 mm︱Guide channels max. 6 ︱Spindle height ca. 1020 mm︱bar material dia. min. 5 mm︱bar material dia. max. 51 mm︱max. bar length 6200 mm︱Remaining piece design 600 mm︱accumulator pressure min 6 bar︱coolant capacity 1500 l/min︱control SPS ︱total power requirement 2,3 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 7,2 x 1,55 x 1,6 m︱
          used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III Condition: As NEW, approx. 500 operating hours incl: Guide channels Ø 20/24/44 Material slide Ø 19/22/42 spindle insert tubes Ø 20/24/44 Interface to the machine set up for Mazak QT 200 MS x 500 Area of application: Ideal for small to medium batch sizes Features: Minimal changeover times, channel change at the touch of a button Optimum running properties 3 to 6 guide channels, high dead weight Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels High level of operating convenience thanks to an 18 cm (7") widescreen touch display. Reliable feeding of rotationally symmetrical profile material Electronic synchronisation device, optimum material guidance between magazine and machine with hydrodynamic telescopic system. Simple changeover from long to short turning operation at the touch of a button Special features: Simple change of the spindle insert tubes through axial displacement of the magazine. Process-integrated remnant removal to the rear (remnant length 600 mm) Machine-friendly, vibration-absorbing design
            diameter 5 - max. 51 mm
            Guide channels max. 6
            Spindle height ca. 1020 mm
            bar material dia. min. 5 mm
            bar material dia. max. 51 mm
            max. bar length 6200 mm
            Remaining piece design 600 mm
            accumulator pressure min 6 bar
            coolant capacity 1500 l/min
            control SPS
            total power requirement 2,3 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 7,2 x 1,55 x 1,6 m
            Description :
            used multi-channel bar feeder ecoPROFImat 42.6 RK3 / 6000 III
            Condition: As NEW, approx. 500 operating hours
            incl:
            Guide channels Ø 20/24/44 Material slide Ø 19/22/42
            spindle insert tubes Ø 20/24/44
            Interface to the machine set up for Mazak QT 200 MS x 500

            Area of application: Ideal for small to medium batch sizes
            Features:
            Minimal changeover times, channel change at the touch of a button
            Optimum running properties 3 to 6 guide channels, high dead weight
            Maximum running smoothness, hydrodynamic bearing, 360° closed guide channels
            High level of operating convenience thanks to an 18 cm (7") widescreen touch
            display. Reliable feeding of rotationally symmetrical profile material
            Electronic synchronisation device, optimum material guidance between magazine
            and machine with hydrodynamic telescopic system.
            Simple changeover from long to short turning operation at the touch of a button
            Special features:
            Simple change of the spindle insert tubes through axial displacement of the
            magazine. Process-integrated remnant removal to the rear (remnant length 600 mm)
            Machine-friendly, vibration-absorbing design


        • Mager & Wedemeyer
        • Europaallee 24a
        • 28309 Bremen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier LNS Eco Load


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-2777 · Bar Stock Carrier

          LNS - Eco Load - - 2004 -

          Technical details
          Bar diameter 6 - 65 mm︱Bar Length 300 - 1250 mm︱Length 1600 mm︱Depth 1048 mm︱Height 1010 / 1410 mm︱Weight 375 kg︱
            Bar diameter 6 - 65 mm
            Bar Length 300 - 1250 mm
            Length 1600 mm
            Depth 1048 mm
            Height 1010 / 1410 mm
            Weight 375 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier BREUNING IRCO Profimat 65.6 196.6


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8361 · Bar Stock Carrier

          BREUNING IRCO - Profimat 65.6 196.6 - - 2001 - SPS

          Technical details
          diameter 35 - max. 65 mm︱Guide channels 6 ︱control SPS ︱max. bar length 3.200 mm︱bar material dia. min. 35 mm︱bar material dia. max. 65 mm︱total power requirement 2 kW︱weight of the machine ca. 2,0 t︱dimensions of the machine ca. 4,0 x 1,1 x 1,6 m︱
          Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC
            diameter 35 - max. 65 mm
            Guide channels 6
            control SPS
            max. bar length 3.200 mm
            bar material dia. min. 35 mm
            bar material dia. max. 65 mm
            total power requirement 2 kW
            weight of the machine ca. 2,0 t
            dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
            Description :
            Multi-Channel-Bar-Feeding-System
            BREUNING IRCO - 65.6 196.6

            - has been installed at a Mori Seiki ZL 200 SMC


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier IRCO ILS-RBE 7208


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03051 · Bar Stock Carrier

          IRCO - ILS-RBE 7208 - - 1999 -

          Technical details
          diameter 15 mm︱length 800 mm︱
          = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm
            diameter 15 mm
            length 800 mm
            Description :
            = bar loading and de-loading magazine

            for bars up to 15 mmø, bar length 800 mm


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier SYMCO KH-16


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03050 · Bar Stock Carrier

          SYMCO - KH-16 - - 1999 -

          Technical details
          diameter 3 - 16 mm︱length 3000 mm︱
          = bar loading magazin for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
            diameter 3 - 16 mm
            length 3000 mm
            Description :
            = bar loading magazin

            for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø



        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier FMB Turbo 3-26


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02960 · Bar Stock Carrier

          FMB - Turbo 3-26 - - 1998 -

          Technical details
          diameter 26 mm︱length 3200 mm︱Control ︱total power requirement 1 kW︱weight of the machine ca. 1,4 t︱dimensions of the machine ca. 4,5 x 0,8 x 1,35 m︱
          Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26
            diameter 26 mm
            length 3200 mm
            total power requirement 1 kW
            weight of the machine ca. 1,4 t
            dimensions of the machine ca. 4,5 x 0,8 x 1,35 m
            Description :
            Bar feeder FMB Turbo 3-26

            1 channel and bar pusher for 26mm
            Bar length max. 3200 mm
            Was attached to Gildemeister Ergomat TDA 26



        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB DNH 42/3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-03060 · Bar Stock Carrier

          TRAUB - DNH 42/3000 - - 1998 -

          Technical details
          bar material dia. 12 - 42 mm︱bar length 3200 mm︱feed speeds 220 mm/sec︱return speed 440 mm/sec︱feed power bis 400 Nm︱compressed air max. 6 bar︱filling capacity 22 Stangen x ø 12 mm︱filling capacity 13 Stangen x ø 20 mm︱filling capacity 7 Stangen x ø 42 mm︱hexagon material bis SW 27 mm︱square material bis SW 20 mm︱total power requirement 0,75 kW︱weight of the machine ca. 0,83 t︱dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m︱
          = bar loading magazine, compressed air controlled
            bar material dia. 12 - 42 mm
            bar length 3200 mm
            feed speeds 220 mm/sec
            return speed 440 mm/sec
            feed power bis 400 Nm
            compressed air max. 6 bar
            filling capacity 22 Stangen x ø 12 mm
            filling capacity 13 Stangen x ø 20 mm
            filling capacity 7 Stangen x ø 42 mm
            hexagon material bis SW 27 mm
            square material bis SW 20 mm
            total power requirement 0,75 kW
            weight of the machine ca. 0,83 t
            dimensions of machine L x W x H 5,06 x 0,85 x 1,275 m
            Description :
            = bar loading magazine, compressed air controlled


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier HYDROBAR LNS - THB-42-2,4


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-002243 · Bar Stock Carrier

          HYDROBAR - LNS - THB-42-2,4 - - 1996 -

          Technical details
          diameter 42 mm︱length 1500 mm︱voltage 380 V / 50 Hz︱total power requirement 1,1 kW︱weight of the machine ca. 0.4 t︱dimensions of the machine ca. m︱
          Rod guidance pipe, diameter 42 x 2400 mm length, 2 columns, 1 hydraulic aggregate,
            diameter 42 mm
            length 1500 mm
            voltage 380 V / 50 Hz
            total power requirement 1,1 kW
            weight of the machine ca. 0.4 t
            Description :
            Rod guidance pipe, diameter 42 x 2400 mm length,
            2 columns, 1 hydraulic aggregate,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Bar Stock Carrier TRAUB 45/26


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00388 · Bar Stock Carrier

          TRAUB - 45/26 - - 1984/96 -

          Technical details
          diameter 45 mm︱length 4400 mm︱total power requirement 1,0 kW︱weight of the machine ca. 1,2 t︱dimensions of the machine ca. 5 x 0,4 x 1,2 m︱
            diameter 45 mm
            length 4400 mm
            total power requirement 1,0 kW
            weight of the machine ca. 1,2 t
            dimensions of the machine ca. 5 x 0,4 x 1,2 m


        • Walter Kames GmbH
        • Dillenburger Weg 34
        • 40229 Düsseldorf
        • Deutschland

        • Datasheet
          Request / Contact

          Rotary Table

          used Other accessories for machine tools Rotary Table MITSUI SEIKI JC 8 MA


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-11355 · Rotary Table

          MITSUI SEIKI - JC 8 MA - - unbekannt -

          Technical details
          table diameter 800 mm︱table height 220 mm︱weight 430 kg︱
            table diameter 800 mm
            table height 220 mm
            weight 430 kg


        • Hans Klein Werkzeugmaschinenhandel GmbH
        • Im Mühlgut 2-4
        • 77815 Bühl
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table  Ø 500 mm


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-T1003 · Rotary Table

          - Ø 500 mm - - unbekannt -

          Technical details
          table diameter 500 mm︱weight of the machine ca. ca. 0,2 t︱table height / mm︱
            table diameter 500 mm
            weight of the machine ca. ca. 0,2 t
            table height / mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table WALTER Rundtisch Elektrisch


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1425 · Rotary Table

          WALTER - Rundtisch Elektrisch - - unbekannt -

          Technical details
          centre height / mm︱
          O. 600 mm Weight: 340 kg
            centre height / mm
            Description :
            O. 600 mm
            Weight: 340 kg


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table FIBROTAKT mit Schaltschrank + Pumpe


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-S1732 · Rotary Table

          FIBROTAKT - mit Schaltschrank + Pumpe - - unbekannt -

          Technical details
          table length 800 mm︱table width 800 mm︱table load / t︱
          Make: Fibrotakt Type: 11.16.7.13.3.72.41.4.0360 Diameter: 800mm + FIBRO control cabinet + Heidenhain up-down counter Type: VRZ 166 + Peiseler hydraulic pump Type:26184 round table: Total length: about 1500mm Total width: approx. 900mm Total height: approx. 320mm Documents: circuit diagram
            table length 800 mm
            table width 800 mm
            table load / t
            Description :
            Make: Fibrotakt
            Type: 11.16.7.13.3.72.41.4.0360
            Diameter: 800mm
            +
            FIBRO control cabinet
            +
            Heidenhain up-down counter
            Type: VRZ 166
            +
            Peiseler hydraulic pump
            Type:26184

            round table:
            Total length: about 1500mm
            Total width: approx. 900mm
            Total height: approx. 320mm

            Documents: circuit diagram


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table UNBEKANNT Ø1000mm Rundtisch Teilapparat


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1419 · Rotary Table

          UNBEKANNT - Ø1000mm Rundtisch Teilapparat - - unbekannt -

          Technical details
          table diameter 1000 mm︱table load / t︱table height 200 mm︱weight 730 kg︱
            table diameter 1000 mm
            table load / t
            table height 200 mm
            weight 730 kg


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table WALTER Ø400mm Rundtisch Teilapparat


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1421 · Rotary Table

          WALTER - Ø400mm Rundtisch Teilapparat - - unbekannt -

          Technical details
          centre height / mm︱weight 110 kg︱diameter 400 mm︱
            centre height / mm
            weight 110 kg
            diameter 400 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table UNBEKANNT Ø360mm Rundtisch Teilapparat


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1420 · Rotary Table

          UNBEKANNT - Ø360mm Rundtisch Teilapparat - - unbekannt -

          Technical details
          centre height / mm︱weight 110 kg︱diameter 360 mm︱
            centre height / mm
            weight 110 kg
            diameter 360 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table HAHN & KOLB Ø500mm Rundtisch Teilapparat


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-C1423 · Rotary Table

          HAHN & KOLB - Ø500mm Rundtisch Teilapparat - - unbekannt -

          Technical details
          centre height / mm︱weight 160 kg︱diameter 500 mm︱
            centre height / mm
            weight 160 kg
            diameter 500 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table FRITZ WERNER 2.943


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-T1005 · Rotary Table

          FRITZ WERNER - 2.943 - - unbekannt -

          Technical details
          table diameter 630 mm︱weight of the machine ca. ca, 0,35 t︱table height 220 mm︱
            table diameter 630 mm
            weight of the machine ca. ca, 0,35 t
            table height 220 mm


        • ATMH Werkzeugmaschinenhandel GmbH
        • Scharpenbergerstr.96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table UNBEKANNT


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-1743 · Rotary Table

          UNBEKANNT - - - unbekannt -

          Technical details
          table diameter 700 mm︱table load ? t︱table height ? mm︱weight of the machine ca. 300 kg︱dimensions of the machine ca. ? m︱
            table diameter 700 mm
            table load ? t
            table height ? mm
            weight of the machine ca. 300 kg
            dimensions of the machine ca. ? m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table MADER RSE-K-6-4-R-P


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00444 · Rotary Table

          MADER - RSE-K-6-4-R-P - - 2008 - konventionell

          Technical details
          table diameter 180 mm︱height 65 mm︱flange surface 180x180 mm︱drill hole spacing 154 mm︱drive compressed air 5-8 bar︱weight 8,5 kg︱year of construction 2008 - ︱
          MADER rotary indexing unit size 6 Item No. 246840 Serial no. 8V 216186 RSE-K-6-4-R-P table Ø 180mm height 65mm flange surface 180x180mm drill hole spacing 154mm connection R 1/8" control electro-pneumatic drive compressed air 5-8bar weight 8.5kg unused in original packaging You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            table diameter 180 mm
            height 65 mm
            flange surface 180x180 mm
            drill hole spacing 154 mm
            drive compressed air 5-8 bar
            weight 8,5 kg
            year of construction 2008 -
            Description :
            MADER
            rotary indexing unit
            size 6
            Item No. 246840
            Serial no. 8V 216186
            RSE-K-6-4-R-P
            table Ø 180mm
            height 65mm
            flange surface 180x180mm
            drill hole spacing 154mm
            connection R 1/8"
            control electro-pneumatic
            drive compressed air 5-8bar
            weight 8.5kg
            unused
            in original packaging

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.600 €
          Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table SPISIN 81125 F / 200 H-R


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6751 · Rotary Table

          SPISIN - 81125 F / 200 H-R - - 2007 - CNC 220

          Technical details
          table diameter 200 mm︱table load 85 kg︱table height 125 mm︱Control CNC 220 ︱total power requirement kW︱weight of the machine ca. 85 kg︱dimensions of the machine ca. 1,0x0,8x0,5 m︱
            table diameter 200 mm
            table load 85 kg
            table height 125 mm
            Control CNC 220
            weight of the machine ca. 85 kg
            dimensions of the machine ca. 1,0x0,8x0,5 m


        • IMZ Maschinen Vertriebs GmbH
        • Marie-Curie-Straße 19
        • 73529 Schwäbisch Gmünd
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table FIBRO NC 2.01.0160.0.1.04.02


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00383 · Rotary Table

          FIBRO - NC 2.01.0160.0.1.04.02 - - 2001 - konventionell

          Technical details
          weight of the machine ca. 250 kg︱Clamping surface 86x22 cm︱height of the machine 27 cm︱Year of construction 2001 -︱
          FIBRO NC rotary table 3-fold NC 2.01.0160.0.1.04.02 with 3x NC 2.01.0160.0.1.00.00 Weight 250kg Clamping surface 86x22cm Height 27cm drive shaft diameter 25mm dividing heads flange diameter 140mm spindle shafts diameter 24mm Year of construction 2001 used very good condition You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight of the machine ca. 250 kg
            Clamping surface 86x22 cm
            height of the machine 27 cm
            Year of construction 2001 -
            Description :
            FIBRO
            NC rotary table 3-fold
            NC 2.01.0160.0.1.04.02
            with 3x NC 2.01.0160.0.1.00.00
            Weight 250kg
            Clamping surface 86x22cm
            Height 27cm
            drive shaft diameter 25mm
            dividing heads flange diameter 140mm
            spindle shafts diameter 24mm
            Year of construction 2001
            used
            very good condition

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 4.200 €
          Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table SMP PC8V800ROK


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-2910 · Rotary Table

          SMP - PC8V800ROK - - 1989 -

          Technical details
          table diameter unbkt. mm︱table load unbkt. t︱table height unbtk. mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            table diameter unbkt. mm
            table load unbkt. t
            table height unbtk. mm


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Other accessories for machine tools Rotary Table DECKEL 2238 002600 / passend zu  FP 4


          • EnTeHa GmbH & Co.KG
          • Im Wollenklingen 6
          • 69517 Gorxheimertal
          • Deutschland

          • +49 6201 2630 545
          • info@enteha.de
            www.enteha.de
          #2081-4926 · Rotary Table

          DECKEL - 2238 002600 / passend zu FP 4 - - 1980 -

          Technical details
          table diameter 800 * 600 mm︱table load 0,25 t︱table height - mm︱total power requirement 3 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 1,1 x 0,8 x 0,8 m︱
            table diameter 800 * 600 mm
            table load 0,25 t
            table height - mm
            total power requirement 3 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 1,1 x 0,8 x 0,8 m


        • EnTeHa GmbH & Co.KG
        • Im Wollenklingen 6
        • 69517 Gorxheimertal
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

          TOP Manufacturer:

          BREUNING IRCO - TRAUB - FMB - LNS - IRCO - HYDROBAR - SYMCO -