---

2- ROLL BAR STRAIGHTENING MACHINE for black bars constr. Bronx type hyperbolic type no. PBRV 6 year 1975 working range 15 - 120 mm Ø max. for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max. Bar Feeding equipment: The machine is equipped with Automatic In- Feed and Out-Feed bar handling system, with bar storage and discharge pockets for bar length 7 m 2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V / 50 Hz via universal drive shaft from gearbox. roll angle adjustment 10 to 20 degrees hydraulic load control incorporated in bottom roll housing straightening speeds 15 and 30 m/min. Top roll vertical adjustment via 2,2 kW motor working direction left to right Operational control from central control desk The machine consists of: Machine body 2 x drive gearboxes 2 x universal drive shafts in-feed table out-feed table In-going bar storage racks out-going bar collection pockets control panel control desk spare parts including one set of work rolls weight of the straightening machine 25,4 to. total weight 32 to

---

2- ROLL BAR STRAIGHTENING MACHINE for black bars constr. Bronx type hyperbolic type no. PBRV 6 year 1975 working range 19 - 108 mm Ø max. for carbon + alloy steel round as rolled bars: 19 - 108 mm Ø max. Bar Feeding equipment: The machine is equipped with Automatic In- Feed and Out-Feed bar handling system, with bar storage and discharge pockets for bar length 7 m 2 vertically opposed work rolls, each roll driven by 30/60 kW AC motor, 440 V / 50 Hz via universal drive shaft from gearbox. roll angle adjustment 10 to 20 degrees hydraulic load control incorporated in bottom roll housing straightening speeds 15 and 30 m/min. Top roll vertical adjustment via 2,2 kW motor Operational control from central control desk The machine consists of: Machine body 2 x drive gearboxes 2 x universal drive shafts in-feed table out-feed table In-going bar storage racks out-going bar collection pockets control panel control desk weight of the straightening machine 25,4 to. total weight 32 to

---

New machine Two-roller straightening and polishing machine different sizes. Working range: from 6 - 120 mm PLEASE ASK FOR YOUR NEEDS

---

2-roll bar straightening machine constr. Farmer Norton size: 4 working range: 12.7 - 102 mm Ø bar length: up to approx. 7.5 Meter The machine is complete with: - inlet table - inlet roller conveyor - straightening machine - outlet roller conveyor - collecting rack

working area 12 - 100 mm︱Bar length 2 500 - 9 000 mm︱speed max. 80 m/min︱

---

2 - ROLL STRAIGHTENING AND POLISHING MACHINE for bright bars and tubes Constr.: KIESERLING Type: WRP 100 year: 1995 condition: excellent The machine can be used for straightening and polishing drawn or peeled (bright) bars and for straightening of middle-sized or thick walled tubes, whereas the ends are straightened as well. Working range 12 mm up to 100 mm Ø straightening force 900 kN speed up to 80 m/min. infinitely variable bar lengths 2500 - 9000 mm drive motors 2 x 110 kW, 400 V, 50 Hz The machine consists of: ======================== - inlet table - inlet channel 9000 mm - hydraulically inlet duo with inclined rollers - main machine body with 2 gear boxes constr. Flender and 2 motors - hydraulically outlet - roller - Duo - outlet channel 9500 mm - collecting rack - electrical cabinet, command desk, hydraulic system Total weight: approx. 28,5 to.

---

Two-Roll Bar Straightening Machine Constr. Kieserling Model WRPH 80/110 B year 1980 Extract from a KIESERLING brochure about the functioning principal of the machine: "The Two-Roll Straightening Machines, Type WRPH, serve for machining of hot rolled or forged bars with usual dia. tolerances as well as of bright-drawn or peeled material. Bright-drawn and peeled round bars will be straightened and polished in the two vertically arranged straightening rolls. The lower roll holder rests on the bottom part of the machine, thus forming a rigid machine. For straightening of black bars the bottom roll is supported by a hydraulic cushion, thereby absorbing diameter tolerances and ovality at almost constant straightening pressure. In addition to bars also thick-walled tubes can be straightened. The machines type WRPH are especially adapted for straightening of high resistance material with a max. yield strength 01 110 kp/mm2. All machines are supplied with centralized adjustment of guiding gibs and a device for quick exchange of straightening rolls and guiding gibs. Upon request the machines can be laid out to the "bar to bar" version which means that the bars can be fed into the machine without any gap In between. This design guarantees highest possible efficiency. " The machine consists of: - main machine body with mounted straightening rollers - 2 main draft shafts - 2 gear boxes - 2 three-phase motors, each 30 kW - outlet duo - hydraulic system - 2 sets spare straightening rollers (1 set of which mounted on roller frame holder) HOWEVER WITHOUT ELECTRICAL CABINET weight: approx. 18,0 to.

---

2-roll bar straightening polishing machine Construction: Kieserling Type: WRPH 80 Year: 1971 Working range: Ø 20 - 80 mm Three-phase motor a.c. motor left and right Main drive: 2x 45 kW 1475 rpm 230 / 380 V Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55 kompete line Weight: approx. 25 to. Video upton request

---

2-roll bar straightening - polishing machine Construction: Kieserling Type: WRPH 80 Year: 1971 Working range: Ø 20 - 80 mm Three-phase motor a.c. motor left and right Main drive: 2x 45 kW 1475 rpm 230 / 380 V Transmission gear: 2x 20 / 45 kW i=50,5/36,4/26/18,65/13,2/9,55 complete line with: - feeding table - inlet roller way with bar separation - inlet drive duo - straightening machine - outlet duo - outlet roller way - collecting rack - electrical cabinet - command desk with device to change the straightening rolls and 2 complete spare straightening rollers with holder and bearings 1 spare cardan shaft cooling tank with pump Weight: approx. 26 to. https://youtu.be/5oYD_QwD2wM

---

2-ROLL STRAIGHTENING MACHINE Constr. KIESERLING Type WRPT 2 Year: 1974 Drawn Sections: Ø 10 mm ÷ 45 mm Speed: 25 m/min Line composed of: table entry canal straightener gear-boxes and motors exit canal colletcing pockets electric equipment (new in 1996) Machine in good conditions.

---

2-roll bar straightening and polishing machine Make: Kieserling Type: WRPT2 Year of construction: 1964 Working area: Ø 10 - 35 mm