Pilger mill
Machinelist: Pilger mill
Pilger mill
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403156 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there is NO vertical counter weight which is going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Spares: 1 pair of pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403665 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1972 / 2006 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good, i.e. the line was completely refurbished / renewed in 2006 NEW TECHNOLOGY: Gear box with internal mass balancing, i.e. there are NO vertical counter weights which are going into the ground. Working range: ============ Entry pressed tubes: Diameter: min./max. 40 / 85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop length: 13,5 m Advancing range: min./max. 3,5 - 21 mm/stroke Rpm range: 60 - 160 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ================ - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 NEW hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare part including pilger rolls The line can be still seen in operation. Photos available upon request.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403678 · Pilger mill
MANNESMANN-MEER - KPW 75 VRM - - 1974 / modern. 1995 -
Technical details
COLD PILGER ROLLING MILL Construction MANNESMANN-MEER Type KPW 75 VRM Condition Very good 1995 modernization of the existing line. Working range: ============== Entry pressed tubes: Diameter: min./max. 40/85 mm Wall thickness: min./max. 2,5 - 14 mm Exit pilgered tubes: min./max. 20 / 60 mm Wall thickness: min./max. 1,2 - 8,5 mm Max. loop lenth: 13,5 m Advancing range: min./max. 3,5 - 18 mm/stroke Rpm range: 60 - 120 Rpm Tools: Full ring system, dia. 370 mm, width: 170 mm Mandrel 960 mm usuable length: Capacity: The line was running on Non-Ferrous material producing 21.000 t./y. NEW Main motor: DC drive, 317 - 323 kW, 320 - 440 V, 50 cycles The line consists of: ===================== - Material loading magazine - Driven entry channel with pushing device (48/60 kW) - Advancing unit with turning gear with: 1 motor for the turning rotation 1 motor for the advancing movement of the tube - Loop channel - Entry clamping chuck - Rolling chamber - Crankshaft housing (cam disk drive) with NEW gear and DC motor - 6 m NEW exit roll channel - 3 New hydraulics - NEW Electrical cabinet with SIEMENS S 7 control system Various spare parts including pilger rolls The system can still be viewed at the seller. Photos available upon request.
Perfil del comerciante: Franz Teutenberg GmbH & Co KG
Contactar con el comerciante
En el canal norte-34 36
47877 - Willich
Alemania
02154 95790 "> 02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Perfil del comerciante
Franz Teutenberg-Maschinen GmbH & Co KG
Nuestra empresa Franz Teutenberg GmbH & Co KG fue fundada en 1966 y desde entonces está especializada en el comercio de máquinas de segunda mano e instalaciones para laminadores, laminadores de semiacabado y trefiladores que trabajan en alambre, barras, chapas y chapas, flejes y tubos.
Disponemos de más de 100 máquinas especiales en un área de piso de aproximadamente 3.000 metros cuadrados.
Podemos ofrecerle máquinas nuevas o poco usadas que hayan sido vendidas por sus dueños anteriores debido a medidas de reorganización u originales de estados en quiebra. También almacenamos máquinas e instalaciones de producción para usos especiales más antiguas que aún pueden brindar muchos años de servicio, lo que le permite lograr un ahorro considerable en gastos de capital.
Además, también ofrecemos la mediación:
- de máquinas nuevas
- de revisión de maquinas
- De reparación o modernización de máquinas.
Dirección
Franz Teutenberg GmbH & Co KG
En el canal norte-34 36
D-47877 Willich
(Aeropuerto Dusseldorf)
Como encontrarnos
Puede comunicarse con nosotros a través del A 52 en dirección a Düsseldorf de la siguiente manera: Salir Willich Schiefbahn, a la izquierda. Hasta el siguiente semáforo, a la derecha. Siga la carretera principal, 2. Carretera a la izquierda (= Am Nordkanal).
Puede comunicarse con nosotros a través de la A 52 hacia Mönchengladbach de la siguiente manera: Salir Willich Schiefbahn, a la derecha. Hasta el siguiente semáforo, a la derecha. Siga la carretera principal, 2. Carretera a la izquierda (= Am Nordkanal).
TOP Manufacturer:
Am Nordkanal 34-36
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Contact person: