Cut-to-Length-Shear

Material Width 1250 mm︱Material Thickness 0,20-0,80 mm︱Blade Length 1300 mm︱Tensile Strength 500 N/mm²︱Speed 120 m/min︱Required Space app. m︱Machine Weight app. 10,33 t︱

---

construction CUTTING SHEAR (DRUM SHEAR - rotary shear) infeed driving unit (driven) with measuring unit no. – infeed rolls (coating – rubberized) 2 adjustment – upper roll pneumatically adjustment – measuring roll (upper) pneumatically power (SIEMENS) 3,15 kW main motor unit 3-phase-current-motor, manufacturer Ansoldo Sistemi Industriali type SN 250 P4, power 83 kW circular lubrication system electric system manufacturer DIGITEC hydraulic unit spare parts 2 pc. blades – NEW, manufacturer NEUENKAMP

Material Width 1.600 mm︱Material Thickness 0,50 - 3,00 mm︱Required Space app. m︱Machine Weight app. t︱

---

execution: FLYING SHEAR power 11 kW working direction (previously) left - right consisting of: - conveyor table - mounted - band feeding unit at infeed side - accelerator belt at run out side - automatic clearance adjustment

Material Width 1650 mm︱Material Thickness 0,50-3,00 mm︱Blade Length 1770 mm︱Tensile Strength 450/750 N/mm²︱Speed 50 m/min︱Required Space app. m︱Machine Weight app. 6,60 t︱

---

construction HEAVY DUTY – CUTTING SHEAR (hydraulically) no. of strokes / tensile strength max. 60 strokes / 450 Nmm² no. of strokes / tensile strength max. 30 strokes / 750 Nmm² cutting speed / tensile strength 0,25 sec. / 450 Nmm² cutting speed / tensile strength 0,50 sec. / 750 Nmm² working direction (previously) left- right accessories: cutting process high dynamic special cylinder and toggle lever blade construction 2 x transverse grinded plastic reinforced deflector (infeed side) automatic adjustable hold-down device pressure adjustable kerf adjustment mechanically conveyor table (upwards of the lower blade) mounted heavy duty – hydraulic unit manufacturer MANNESMANN REXROTH, power 75 kW dimension (l x w x h) / weight: cutting shear 3.600 x 1.150 x 2.200 mm 4.270 kg hydraulic unit 2.150 x 1.900 x 2.100 mm 2.285 kg

working width 500 mm︱material thickness 5 mm︱work speed m/min︱Materialvorschub max. 250 mm︱cutting angle bis 45 °︱power capacity 3 kW︱weight 1,5 To︱range L-W-H 3,0 x 1,5 x 1,5 mm︱

---

Cutting machine used for sealing materials, stroke length and number of cuttings are adjustable, the cutter can be adjusted to 45 degrees angular, stroke- and transport attachment do the transport of the material, the material will be placed on rolls,

sheet width 2050 mm︱plate thickness 2 mm︱strokes per minute until 38 ︱cutting angle 1,75 °︱table height over floor 870 mm︱total power requirement 3 kW︱weight of the machine ca. 1520 kg︱range L-W-H 2,2 x 0,6 x 1,2 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱

---

The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

sheet width 1275 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 3 kW︱weight of the machine ca. 875 kg︱range L-W-H 1,7 x 1,68 x 1,1 m︱Electric 380 Volt ︱Back stop with manual adjustment ︱Shadow line lighting ︱Foot switch ︱Piece counter ︱Squaring arm ︱Support arms ︱

---

The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensions 600 mm. • Right-angled stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • rear photocell. Pre-freight to our stock + packaging 270, -. Machine dealer with own stock of 1600 m².

sheet width 2050 mm︱plate thickness 3 mm︱strokes per minute until 35 ︱cutting angle 2,0 °︱table height over floor 870 mm︱thickness at "Niro-steel" 2 mm︱total power requirement 4 kW︱weight of the machine ca. 1550 kg︱range L-W-H 2,5 x 1,57 x 1,21 m︱Electric 380 Volt ︱

---

The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

sheet width 2300 mm︱plate thickness 1,5 mm︱distance between columns 2400 mm︱impact length 1000 mm︱total power requirement kW︱weight of the machine ca. 0,5 t︱

---

sheet width 2000 mm︱plate thickness 2,25 mm︱distance between columns 2040 mm︱total power requirement 7,5 kW︱weight of the machine ca. 1,5 t︱dimensions of the machine ca. 2,2x1,7x1,1 m︱

---

sheet width 1550 mm︱plate thickness 3 mm︱total power requirement 3 kW︱weight of the machine ca. 1600 kg︱dimensions of the machine ca. 2.060 x 1.140 x 1.210 mm︱

---

Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30' Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting

sheet width 1050 mm︱plate thickness 1 mm︱distance between columns 1000 mm︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,16 x 0,93 x 0,73 m︱

---

sheet width 2550 mm︱plate thickness 4,00 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱

---

** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife

sheet width 2550 mm︱plate thickness 4,0 mm︱distance between columns 2600 mm︱back stop - adjustable 750 mm︱no. of strokes 42 Hub/min︱cutting angle 1°30 ︱table width 450 mm︱table height 800 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3230 kg︱dimensions of the machine ca. 3200 x 2300 x 1350 mm︱

---

** Current new price with special accessories ~ 33.000 euros ** from a maintenance workshop / good condition (!!) Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 * Control unit with touchscreen function * 128 MB internal memory (programming possible) * Multilingual (English, Turkish, German) * INCH/metric conversion - manual cutting gap adjustment, from the front * analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball casters in the support table - free-moving footswitch - rear protective device (light barrier) - original operating instructions (machine + control) Special accessories included : - Pneumatic sheet metal holding device, for thin sheet metal blanks - 1x extra long side stop, with support foot - 1x box with spare knife

sheet width 2100 mm︱plate thickness 3.0 mm︱thickness at "Niro-steel" 1.5 mm︱blade length 2110 mm︱no. of strokes 34 Hub/min︱back stop - adjustable 1000 mm︱cutting angle 1.5 °︱work height max. 880 mm︱Control DIGI ︱engine output 6.25 kW︱weight 2650 kg︱range L-W-H 2750 x 2350 x 1550 mm︱

---

** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325336

sheet width 2100 mm︱plate thickness 3,00 mm︱thickness at "Niro-steel" 1.5 mm︱blade length 2110 mm︱no. of strokes 34 Hub/min︱back stop - adjustable 1000 mm︱cutting angle 1.5 °︱work height max. 880 mm︱Control DIGI ︱engine output 6.25 kW︱weight 2650 kg︱range L-W-H 2750 x 2350 x 1550 mm︱

---

** Machine from a maintenance workshop ** maintained condition (!!) Furnishing: - robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.5 KW) - electro-motorized backgauge, including digital control unit * Adjustment range max. 1.000 mm * Input of target / actual value possible - manual cutting gap adjustment, adjustable from the front - 1x table side stop - Ball rollers in the support table - 1x freely movable foot switch, including EMERGENCY stop button - front finger protection - original instruction manual

sheet width 1530 mm︱plate thickness 2,00 mm︱distance between columns mm︱total power requirement kW︱weight of the machine ca. 0,840 t︱dimensions of the machine ca. 1,90 x 1,30 x 1,20 m︱

---

- manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier

sheet width 2030 mm︱plate thickness 4,00 mm︱thickness at "Niro-steel" 2,50 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱

---

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades

sheet width 2030 mm︱plate thickness 4,0 mm︱thickness at "Niro-steel" 2,5 mm︱no. of strokes 34 Hub/min︱cutting angle 2,5 Grad︱table height 820 mm︱distance between columns 2340 mm︱Control POS 100 ︱back stop - adjustable max. 750 mm︱engine output 6,8 kW︱weight of the machine ca. 2860 kg.︱range L-W-H 2870 x 2070 x 1400 mm︱

---

** Machine from a maintenance workshop ** very well maintained condition - hardly used (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - Electric back gauge, with SCHRÖDER POS 100 NC control * Digital position display from the backgauge * adjustable from the front right * with target/actual value input * Continuous adjustment over the entire travel range * Protection of limit values with limit switches * 9-fold programming possible - "Duo-Cut" drive with two dynamic, powerful geared motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel knife, double-edged - 1x side stop, with T-slot and mm scale - 2x extended sheet metal support arms, with T-slot and mm scale - Selector switch for single and continuous stroke - freely movable foot switch - Rear safety device - original operating instructions + CD Rom **Special accessories included: - pneumatically controlled sheet metal holding device for thin sheet metal cuts * Sheet metal removal / sheet metal slide to the front (operator side) - 1x wooden box with replacement scissor blades * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9325303 * Machinevideo : https://www.youtube.com/watch?v=5w-LdgCg6J8

sheet width 3000 mm︱plate thickness 3 mm︱weight of the machine ca. t︱

---

3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

sheet width 1050 mm︱plate thickness 3,00 mm ST︱cutting angle 2,0 °︱stroke max. 38 p. Min.︱total power requirement 5,5 kW︱weight of the machine ca. 1690 kg.︱range L-W-H 1800 x 1800 x 1250 mm︱

---

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

sheet width 1050 mm︱plate thickness 3,0 mm ST︱cutting angle 2,0 °︱stroke max. 38 p. Min.︱total power requirement 5,5 kW︱weight of the machine ca. 1690 kg.︱range L-W-H 1800 x 1800 x 1250 mm︱

---

** from a maintenance workshop (!!) Furnishing: - Motorized / electric guillotine shears - manual backgauge, adjustment by hand crank * Travel range max. 700 mm * with analogue position display (scale) * manual adjustment from behind - rear protection - rear sheet metal slide - free-moving footswitch

sheet width 2500 mm︱plate thickness 3,25 mm︱distance between columns 2550 mm︱sheet width - max. 2540 mm︱number of strokes - loaded 46 Hübe/min.︱cutting angle 1,2 °︱back stop - adjustable 10- 1000 mm︱total power requirement 8,05 kW︱weight of the machine ca. 3200 kg︱dimensions of the machine ca. 2,8 x 2 x 1,6 m︱

---

It has an electronic back gauge with digital readout. It has 1 side guiding arm, 2 support arm, foot switch etc. It has a sheet holding device at the back side.

sheet width 2500 mm︱plate thickness 2,5 mm︱distance between columns 2550 mm︱cutting angle 1,5 °︱cutting strokes max. 35 p.Min.︱back stop - adjustable 500 mm︱total power requirement 3 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2,9 x 1,4 x 1,16 m︱foot operated switch ︱ ︱

---

sheet width 2000 mm︱plate thickness 4 mm︱distance between columns 2050 mm︱cutting length 2000 mm︱cutting thickness steel 4 mm︱cutting gap adjustment fest/0,05 mm︱ fest/2° ︱Traverse area 1000 mm︱ Elgo P71 ︱Dimensions of machine: ︱length 2600 mm︱width 2300 mm︱height 1500 mm︱control Elgo P71 ︱total power requirement 5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,6x2,3x1,5 m︱

---