,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Section Steel Shear

          Machinelist: Section Steel Shear


          Section Steel Shear

          used Sheet metal working / shaeres / bending Section Steel Shear DURMA IW 110 BTD


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9412109 · Section Steel Shear

          DURMA - IW 110 BTD - - 2003 -

          Technical details

            Description :

          used Sheet metal working / shaeres / bending Section Steel Shear DURMA IW45M


          • B&R Service GmbH
          • Esslingerstr.8
          • 73776 Altbach
          • Deutschland

          • +49 (0)7153 99 46 565
            +49 (0)7153 99 46 568
          • info@b-r-service.de
            www.b-r-service.de
          #2025-1018227 · Section Steel Shear

          DURMA - IW45M - - 2007 -

          Technical details

          used Sheet metal working / shaeres / bending Section Steel Shear ERMAK EKM 60 TN


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8411002 · Section Steel Shear

          ERMAK - EKM 60 TN - - -

          Technical details
          pressure 60,0 t︱square edge steel 35,0 mm︱round bar steel 40,0 mm︱L-beam 120x120x12 mm︱punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm︱throat 220 mm︱flat steel 200x20 / 300x15 mm︱blade length 317 mm︱oil volume 45,0 ltr.︱work height max. 940 / 1140 mm︱strokes per minute max. 26 ︱work stroke 55,0 mm︱total power requirement 4,0 kW︱weight of the machine ca. 1425 kg.︱Dimensions (HxWxD) 1510 x 590 x 1570 mm︱
          Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder
            pressure 60,0 t
            square edge steel 35,0 mm
            round bar steel 40,0 mm
            L-beam 120x120x12 mm
            punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm
            throat 220 mm
            flat steel 200x20 / 300x15 mm
            blade length 317 mm
            oil volume 45,0 ltr.
            work height max. 940 / 1140 mm
            strokes per minute max. 26
            work stroke 55,0 mm
            total power requirement 4,0 kW
            weight of the machine ca. 1425 kg.
            Dimensions (HxWxD) 1510 x 590 x 1570 mm
            Description :
            Furnishing:
            - Support table at the hole punch
            - Support table on the square notcher
            - foot switch
            - Bed. Instructions
            - CE declaration

            + MUBEA - punch and die holder
          used Sheet metal working / shaeres / bending Section Steel Shear ERMAK EKM 80-150 BTD


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8411001 · Section Steel Shear

          ERMAK - EKM 80-150 BTD - - -

          Technical details

            Description :

          used Sheet metal working / shaeres / bending Section Steel Shear GEKA ALRS 600


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-885 · Section Steel Shear

          GEKA - ALRS 600 - - -

          Technical details
          neuca. 10 Wochen ab AuftragsSpanien26700 €︱ 542.01 €︱ 6000 mm︱ 40 mm︱ 6000 mm︱ 600 kg︱ 180 mm︱ 0,2 mm︱ 0,1 mm︱
          The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: * Drive roller with hydraulically controlled pinch roller. * Servo motor with linear encoder. * B&R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. * Positive hydraulic clamping. * Fix guide rollers. * Manually adjustable straight guide rollers. * 6m roller bed conveyor. * Electric cabinet THE WORK PROCESS IS AS FOLLOWS: * Place the flat bar on the rollers * Adjust the lateral rollers to the width of the flat bar * Clamp the material with the hydraulic hold down * Run the program previously generated through Geka´s Line Pro software. The machine will automatically feed to length and automatically will shear B&R PC BASED 10” TOUCH SCREEN CONTROL MAIN FEATURES: The unit consists of an industrial type PC control mounted in a console. It incorporates a touch screen monitor with an intuitive and extremely user friendly interface developed by Geka for ease of navigation through all stages of operation. * B&R Power Panel 500 PC control Intel® Atom™ Architecture advance * One axis control unit. * 10” color touch screen XGA resolution * B&R 2 Gb Compact Flash Memory for data storage. * USB front port * Ethernet port for network connectivity * Easy and extremely user friendly interface developed by Geka * Programming is made through Line Pro software developed by Geka * Importing of dxf/dstv files * Run mode displays layout of the part as it is being punched or spotted * Run, design, jog, configuration and alarm modes * Speed percentage control of the "X" axis via the touch screen potentiometer dial * Jog mode for calibration of axis, manual control of the axis forward and back, and go-to mode for manual shearing. * On-screen diagnostics of PLC input/outputs as well as the X driver, for ease of troubleshooting the system. * Set-up features include selections of multiple languages, inches or millimeters, type of machine, and "X" min/max adjustments. ELECTRIC CABINET * Electric cabinet containing power and control equipment for the axis positioning and control of the machine * Includes Allen-Bradley Guarmaster® safety relays * Electric cabinet is mounted in the same console as the control is located. * Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know ALRS 600 MUST BE FITTED ON A FACTORY BUILT HYDRACROP 80 OR HYDRACROP 110 MACHINE THE ABOVE PRICE DOES NOT INCLUDE HYDRACROP MACHINE OPTION: LINE PRO SOFTWARE: * Offline license included to be installed in a PC for * later on sending the files via the network or with * a USB stick to the machine * It is a visual and a very easy to use application with graphic representations. It shows the operator the image of the piece that is being designed. * Designing parts with a visual layout of the plate and shear pattern * Automatically optimizes the shearing sequence with the ability to also manually change the shear sequence. * Creates manufacturing sheets of the parts for hard copy printouts * Importing of dxf and dstv files available according to designing specifications of the software.
            neu
            ca. 10 Wochen ab Auftrags
            Spanien
            26700 €
            542.01 €
            6000 mm
            40 mm
            6000 mm
            600 kg
            180 mm
            0,2 mm
            0,1 mm
            Description :
            The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length.

            THE ASSEMBLY CONSISTS OF:

            * Drive roller with hydraulically controlled pinch roller.
            * Servo motor with linear encoder.
            * B&R Power Control 500 10”user friendly touch screen control mounted in a control cabinet.
            * Positive hydraulic clamping.
            * Fix guide rollers.
            * Manually adjustable straight guide rollers.
            * 6m roller bed conveyor.
            * Electric cabinet

            THE WORK PROCESS IS AS FOLLOWS:

            * Place the flat bar on the rollers
            * Adjust the lateral rollers to the width of the flat bar
            * Clamp the material with the hydraulic hold down
            * Run the program previously generated through Geka´s Line Pro software.

            The machine will automatically feed to length and automatically will shear

            B&R PC BASED 10” TOUCH SCREEN CONTROL MAIN FEATURES:
            The unit consists of an industrial type PC control mounted in a console.
            It incorporates a touch screen monitor with an intuitive and extremely user friendly interface
            developed by Geka for ease of navigation through all stages of operation.

            * B&R Power Panel 500 PC control Intel® Atom™ Architecture advance
            * One axis control unit.
            * 10” color touch screen XGA resolution
            * B&R 2 Gb Compact Flash Memory for data storage.
            * USB front port
            * Ethernet port for network connectivity
            * Easy and extremely user friendly interface developed by Geka
            * Programming is made through Line Pro software developed by Geka
            * Importing of dxf/dstv files
            * Run mode displays layout of the part as it is being punched or spotted
            * Run, design, jog, configuration and alarm modes
            * Speed percentage control of the "X" axis via the touch screen potentiometer dial
            * Jog mode for calibration of axis, manual control of the axis forward and back, and go-to mode for manual shearing.
            * On-screen diagnostics of PLC input/outputs as well as the X driver, for ease of troubleshooting the system.
            * Set-up features include selections of multiple languages, inches or millimeters, type of machine, and "X" min/max adjustments.

            ELECTRIC CABINET

            * Electric cabinet containing power and control equipment for the axis positioning and control of the machine
            * Includes Allen-Bradley Guarmaster® safety relays
            * Electric cabinet is mounted in the same console as the control is located.
            * Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know

            ALRS 600 MUST BE FITTED ON A FACTORY BUILT HYDRACROP 80 OR HYDRACROP 110 MACHINE
            THE ABOVE PRICE DOES NOT INCLUDE HYDRACROP MACHINE

            OPTION:

            LINE PRO SOFTWARE:

            * Offline license included to be installed in a PC for
            * later on sending the files via the network or with
            * a USB stick to the machine
            * It is a visual and a very easy to use application with graphic representations. It shows the operator the image of the piece that is being designed.
            * Designing parts with a visual layout of the plate and shear pattern
            * Automatically optimizes the shearing sequence with the ability to also manually change the shear sequence.
            * Creates manufacturing sheets of the parts for hard copy printouts
            * Importing of dxf and dstv files available according to designing specifications of the software.
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4051484 · Section Steel Shear

          GEKA - Bendicrop - - 2006 -

          Technical details

          Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)
            Description :
            Standard equipment:
            - Knife set for flat steel
            - Complete knife set for angle steel shears
            - Complete normal punching equipment
            - Quick release device for punches up to 31 mm
            - Support table for punching device, rectangular notching and flat steel shears
            - Bending stamp with matrices V 40 and V 70
            - Electric contact stop (1.000 mm)
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 130 SD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2165 · Section Steel Shear

          GEKA - Bendicrop 130 SD - - -

          Technical details
          neuca. 8 Wochen ab AuftragseSpanien47200 €︱ 958.16 €︱ 130 to︱ 600 mm︱ 5250x18 mm︱ 80 mm︱ 600x18 (max. 600x20 mit D mm︱ 120x120x11 (max. 150x150x mm︱ 45/40 mm︱ 130x12 mm︱ 250x12 mm︱ 15 kW︱
          hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch
            neu
            ca. 8 Wochen ab Auftragse
            Spanien
            47200 €
            958.16 €
            130 to
            600 mm
            5
            2
            50x18 mm
            80 mm
            600x18 (max. 600x20 mit D mm
            120x120x11 (max. 150x150x mm
            45/40 mm
            130x12 mm
            250x12 mm
            15 kW
            Description :
            hydraulic drive
            2 foot pedals for independant working on punching and section station
            bending unit with 2 dies, V50 and V90
            flat steel stationWITH DEVICE FOR REDUCING DEFORMATION
            angle iron station with round and square bar cutting
            triangular notching station with table and gauge
            punching station with table and gauge
            gauge 1000 mm with contact switch, for angle / flat steel station
            operating manual in German and Englisch
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 50


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-10067 · Section Steel Shear

          GEKA - Bendicrop 50 - - Neu -

          Technical details
          flat steel 350 x 15 mm︱round bar steel 35 mm︱square edge steel 30 mm︱L-beam 80x80x8 mm︱hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm︱ 500 kN︱throat 177 mm︱blade length 356 mm︱ 34 (Hub 15mm)︱engine output 3.0 kW︱weight 950 kg︱dimensions 1300x1100x1850 mm︱
          Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)
            flat steel 350 x 15 mm
            round bar steel 35 mm
            square edge steel 30 mm
            L-beam 80x80x8 mm
            hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm
            500 kN
            throat 177 mm
            blade length 356 mm
            34 (Hub 15mm)
            engine output 3.0 kW
            weight 950 kg
            dimensions 1300x1100x1850 mm
            Description :
            Standard equipment:
            - Knife set for flat steel
            - Complete knife set for angle steel shears
            - Complete normal punching equipment
            - Quick release device for punches up to 31 mm
            - Support table for punching device, rectangular notching and flat steel shears
            - Bending stamp with matrices V 40 and V 70
            - Electric contact stop (1.000 mm)
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 50


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-255 · Section Steel Shear

          GEKA - Bendicrop 50 - - -

          Technical details

          with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH We have more than 700 references! stations: 5 punching force: 50 to diam./thickn.: 31 x 12 mm gap: 177 mm strokes/at stroke: 34 s/min at 15 mm flatsteel: 350 x 10 mm (with 2°) flatsteel: 350 x 15 mm (with 5°) angleiron: 80 x 8 mm round-/squarebars: 35 / 30 mm notching thickn.: 10 mm Bending tool: max. 100 x 10 mm motor: 3 kW length: 1300 mm width: 1100 mm height: 1850 mm weight: 950 kg
            Description :
            with bending station

            capacity 50 to
            5 working stations
            flat steel shear with device to reduce deformation
            350 x 10 mm with adjustment 2°
            350 x 15 mm with adjustment 5°
            angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm
            recangular notcher 90 x 42 x 10 mm
            punching station 31 x 12 mm
            press brake device for flat steel max. 100 x 10 mm

            table at flat steel station
            table at notching station
            manual backgauge with electric contact
            2 dies V40 and V70
            gap at punching station 177 mm
            vertical movement of all stations (nor radial)
            hydraulic drive
            1 foot release
            user manual in GERMAN and ENGLISH

            We have more than 700 references!

            stations: 5
            punching force: 50 to
            diam./thickn.: 31 x 12 mm
            gap: 177 mm
            strokes/at stroke: 34 s/min at 15 mm
            flatsteel: 350 x 10 mm (with 2°)
            flatsteel: 350 x 15 mm (with 5°)
            angleiron: 80 x 8 mm
            round-/squarebars: 35 / 30 mm
            notching thickn.: 10 mm
            Bending tool: max. 100 x 10 mm
            motor: 3 kW
            length: 1300 mm
            width: 1100 mm
            height: 1850 mm
            weight: 950 kg
          used Sheet metal working / shaeres / bending Section Steel Shear GEKA Bendicrop 50


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-113 · Section Steel Shear

          GEKA - Bendicrop 50 - - 2024 -

          Technical details
          neu20249711prompt, Zwischenverkauf vSpanien15000 €︱ 307.5 €︱ 1150 to︱ 177 mm︱ 5131 x 12 mm︱ 34 1/min︱ 350 x 15 mm︱ 80 x 8 mm︱ 35 / 30 mm︱ 10 mm︱ 100 x 10 mm︱
          with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!
            neu
            2024
            9711
            prompt, Zwischenverkauf v
            Spanien
            15000 €
            307.5 €
            1
            1
            50 to
            177 mm
            5
            1
            31 x 12 mm
            34 1/min
            350 x 15 mm
            80 x 8 mm
            35 / 30 mm
            10 mm
            100 x 10 mm
            Description :
            with bending station

            capacity 50 to
            5 working stations
            flat steel shear with device to reduce deformation
            350 x 10 mm with adjustment 2°
            350 x 15 mm with adjustment 5°
            angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm
            recangular notcher 90 x 42 x 10 mm
            punching station 31 x 12 mm
            press brake device for flat steel max. 100 x 10 mm

            table at flat steel station
            table at notching station
            manual backgauge with electric contact
            2 dies V40 and V70
            gap at punching station 177 mm
            vertical movement of all stations (nor radial)
            hydraulic drive
            1 foot release
            user manual in GERMAN and ENGLISH

            WE HAVE MORE THAN 700 REFERENCES!
          •   
          •   
          • 1  

            Perfil del comerciante: Kirchgeorg Werkzeugmaschinen
          Ltd.

          Contactar con el comerciante



            máquinas herramientas Kirchgeorg
          Ltd.

           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Alemania
            0049-(0)-6103-9909-0">0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de

          Perfil del comerciante


          Kirchgeorg Werkzeugmaschinen GmbH fue fundada en 1919 en Erfurt, Turingia por el ingeniero Paul Kirchgeorg, y es uno de los concesionarios de máquinas herramienta nuevos y usados ​​más antiguos de Alemania.

          Kirchgeorg comenzó como representante y distribuidor de maquinaria para trabajar el metal y la madera, y rápidamente convirtió a la compañía en un servicio completo de maquinistas pesados ​​y maquinarias de máquinas usadas y concesionarios de equipos.

          En 1953, como resultado de los intentos de expropiación del gobierno de Alemania del Este, Kirchgeorg reubicó la compañía en Fulda, Hesse, en Alemania Occidental. En 1953 y 1960 se le unieron sus hijos, Harro y Reiner, respectivamente, y la compañía entró en otra fase de expansión.

          En 1960, los primeros edificios se construyeron en nuestra ubicación actual en Dreieich y desde entonces han crecido para incluir un piso de exhibición de 3,000 + metro cuadrado. 

          Con Thomas Kirchgeorg, Ingeniero Industrial, uniéndose a la compañía en 2003, nos complace decir que nuestra empresa familiar está en su tercera generación. 

          Hoy en día, ofrecemos más que 600 nuevas y usadas máquinas herramientas en exhibición en Dreieich. Además de la distribución mundial, ofrecemos asesoramiento individualizado, experto y un servicio completo. También podemos ayudarlo a obtener financiamiento, transporte, instalación e instrucción.

          En nuestras instalaciones de producción, todas las máquinas usadas están totalmente reacondicionadas, probadas exhaustivamente y tienen garantía. También fabricamos piezas de repuesto, engranajes, cremalleras y otros módulos de actuación.

          Nuestra subsidiaria, NASSOVIA Maschinenservice GmbH, ha estado brindando un servicio autorizado para máquinas EDM Schiess-Nassovia Cavity Sinking desde 1992.

          Somos miembros de la Asociación Alemana de Máquinas y Mayoristas de Máquina-Herramienta (FDM).

          Nuestro almacén 3000 m2

          Estamos más que encantados de ayudarle con cualquier pregunta. Esperamos con interés escuchar de usted. 
           

          Administración

          Teléfono
          Thomas Kirchgeorg+49 (6103) 9909-23

          Ventas

          Teléfono
          Norbert Dick+49 (6103) 9909-14

          Dirección de ventas de producción.

          Teléfono
          Matthias Goy+49 (6103) 9909-27

          Tecnica de produccion administración

          Teléfono
          Gerd Brandt+49 (6103) 9909-17

          Contabilidad

          Teléfono
          Maria kelbler+49 (6103) 9909-18

          Recepción

          Teléfono
          André Milbradt+49 (6103) 9909-0

          Webmaster
          Thomas Kirchgeorg

          NASSOVIA Machine Service GmbH

          Teléfono
          Hans Becker+ 49 (6103) 322693
          KIRCHGEORG
          Machine Tools GmbH

          Frankfurterstrasse 141
          D-63303 Dreieich

          Teléfono + 49 (6103) 9909-0
          Fax + 49 (6103) 9909-50
          E-Mail info@kirchgeorg.de

          Horas de trabajo:
          Lunes a jueves 7.30-16.30 CET
          Viernes 7.30-15.30 CET




          TOP Manufacturer:

          GEKA - PEDDINGHAUS - KINGSLAND - ERMAK - HUVEMA - WMW -

          Kirchgeorg Werkzeugmaschinen GmbH  63303 - Dreieich-Sprendlingen Frankfurter Straße 141 Deutschland
          Kirchgeorg Werkzeugmaschinen GmbH

          Frankfurter Straße 141



          Contact Trader


            Kirchgeorg Werkzeugmaschinen GmbH
           Frankfurter Straße 141
            63303 - Dreieich-Sprendlingen
            Deutschland
            0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
            info@kirchgeorg.de
            www.kirchgeorg.de
            Contact person:
          Sehr geehrter Herr Thomas Kirchgeorg 0049-(0)-6103-9909-23
          Sehr geehrter Herr Norbert Dick 0049-(0)-6103-9909-14

           




          Machine category


          Abkantpresse - hydraulisch · Anreißplatte · Aufspannwinkel · Ausdrehkopf · Ausklinkmaschine · Auswuchtmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohr- und Fräsmaschine · Bohrautomat · Bohrerschleifmaschine · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge · Dornrohrbiegemaschine · Drahterodiermaschine · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Eckverbindungsmaschinen · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Fräsmaschine - Universal · Futter · Gewindeschneidmaschine · Gleitschleifanlage · Handhebel-Schere · Hebegeräte · Hydraulische - Tafelschere · Hydraulische Presse · Härteofen · Kaltkreissäge · Kolbenkompressor · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Leit- und Zugspindeldrehmaschine · Lötanlage · Magnetspannplatte · Mechanikerdrehbank · Nutenziehmaschine · Planscheibe · Plasmaschneidegerät · Profil- Ring- Biegemaschine · Profilprojektor · Radialbohrmaschine · Richtplatte · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine - Außen · Rundschleifmaschine - Spitzenlos · Rundschleifmaschine - Universal · Rundtisch · Räummaschine - Innen - Vertikal · Sandstrahlanlage · Schleifbock · Schraubenkompressor · Schraubstock · Schutzgasschweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schwenkbiegemaschine · Senkerodiermaschine · Stangenlader · Staubabsaugung · Stoßmaschine - Vertikal · Stähleschleifmaschine · Säulenbohrmaschine · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Tischbohrwerk · Topfschleifmaschine · Tuschierpresse · Werkbank · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Würfeltisch · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnstangenfräser · Zahnstangenfräsmaschine · Zentrifuge · Zentrumschleifmaschine · Zubehör/Sonstiges ·