,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Folding Machine

          Machinelist: Folding Machine


          Folding Machine

          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER MAKV 2000/2.0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355203 · Folding Machine

          SCHROEDER - MAKV 2000/2.0 - - 2009 - CFB 120

          Technical details
          sheet width 2020 mm︱plate thickness 2.0 mm ST︱thickness at "Niro-steel" 1.25 mm︱bending angle max. 135 °︱stroke of upper beam 120 mm︱adjustment UW 25.0 mm︱Control CFB 120 ︱voltage 400 V︱total power requirement 2.0 kW︱weight of the machine ca. 1410 kg.︱dimensions of the machine ca. 2930 x 2200 x 1175 mm︱
          ** new condition (!!) ** New price at the time including accessories was approx. 35.000 euros ** Special price on request SCHRÖDER bending beam drive enables high forces and moments Efficiency. This means significantly reduced drive power lower energy consumption, but with increasing speed and Running - dynamics. The upper beam drive designed in the middle enables balanced torque distribution across the entire drive unit. The completely closed drive and guide units almost maintenance and wear-free operation. The regulation of the individual Drive axles are basically with a high quality parameter switchable frequency converter implemented. The CNC graphics control is combined with servo drives, which are optimized by the Power utilization results in a significant increase in speed and power. Furnishing: - SCHRÖDER CNC control CFP 120 * Simple and clear program creation * Enter data via 12" LCD touch screen (swivelable) * Program set consisting of: Sheet thickness in mm or inches Opening width of the upper beam in mm or inches Bend angle Bend angle correction Dimension of the back gauge * The following languages are possible: German Dutch Russian English Finnish Swedish French Romanian Danish Czech * Tool library * PLC control program * Tool position memory for each program * max. 99 cycles per bending set * Information aids such as actual value display / error display etc. * EMERGENCY stop button at the front - very high travel speeds of all controlled axes - CNC electro-motorized back gauge, with sheet metal support surface * Sheet metal support surface made of stainless steel (special accessory) - manual bending beam adjustment.. max. 25.0 mm - SCHRÖDER bending tool set - 1x freely movable double foot switch - Connection cable including power plug - Control cabinet installed on the side - 2x transport hooks for hanging the machine - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355203
            sheet width 2020 mm
            plate thickness 2.0 mm ST
            thickness at "Niro-steel" 1.25 mm
            bending angle max. 135 °
            stroke of upper beam 120 mm
            adjustment UW 25.0 mm
            Control CFB 120
            voltage 400 V
            total power requirement 2.0 kW
            weight of the machine ca. 1410 kg.
            dimensions of the machine ca. 2930 x 2200 x 1175 mm
            Description :
            ** new condition (!!)
            ** New price at the time including accessories was approx. 35.000 euros
            ** Special price on request

            SCHRÖDER bending beam drive enables high forces and moments
            Efficiency. This means significantly reduced drive power
            lower energy consumption, but with increasing speed and
            Running - dynamics. The upper beam drive designed in the middle enables
            balanced torque distribution across the entire drive unit. The
            completely closed drive and guide units almost maintenance and wear-free
            operation. The regulation of the individual Drive axles are basically with a
            high quality parameter switchable frequency converter implemented. The CNC
            graphics control is combined with servo drives, which are optimized by the
            Power utilization results in a significant increase in speed and power.

            Furnishing:
            - SCHRÖDER CNC control CFP 120
            * Simple and clear program creation
            * Enter data via 12" LCD touch screen (swivelable)
            * Program set consisting of:
            Sheet thickness in mm or inches
            Opening width of the upper beam in mm or inches
            Bend angle
            Bend angle correction
            Dimension of the back gauge
            * The following languages are possible:
            German
            Dutch
            Russian
            English
            Finnish
            Swedish
            French
            Romanian
            Danish
            Czech
            * Tool library
            * PLC control program
            * Tool position memory for each program
            * max. 99 cycles per bending set
            * Information aids such as actual value display / error display etc.
            * EMERGENCY stop button at the front
            - very high travel speeds of all controlled axes
            - CNC electro-motorized back gauge, with sheet metal support surface
            * Sheet metal support surface made of stainless steel (special accessory)
            - manual bending beam adjustment.. max. 25.0 mm
            - SCHRÖDER bending tool set
            - 1x freely movable double foot switch
            - Connection cable including power plug
            - Control cabinet installed on the side
            - 2x transport hooks for hanging the machine
            - original instruction manual

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355203


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER SPB 3200/3,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76451 · Folding Machine

          SCHROEDER - SPB 3200/3,0 - - 2008 -

          Technical details
          sheet width 3220 mm︱plate thickness 3,00 mm ST︱thickness at "Niro-steel" 2,00 mm︱daylight opening OW 300 mm︱speed OW 100 mm/sec︱adjustment BW 80,0 mm︱speed BW 120 Grad/sec︱back stop - adjustable k.A. mm︱speed HA 300 mm/sec︱compressed air 6,0 bar︱work height max. 869 mm︱total power requirement 8,8 kW︱voltage 400 V︱weight 5600 kg︱range L-W-H 4575 x 2450 x 1737 mm︱
          ** current new price ~ 220.000 euros ** from a maintenance workshop Furnishing: - Motorized universal folding machine * high-precision mechanics with modern control technology * for single and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - rotating upper beam / as an automatic tool changing system * with 2x tool stations (sharp and goat's foot bending rail) * Reduces set-up and idle times * Saves time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * with touchscreen control panel, swiveling front right * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation * Windows XP operating system * Swivel control, right front - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. - with divided / rear sheet metal support surface, including ball transfer units - Free-moving double foot switch - original instruction manual ** Special accessories included : - 1x 30° upper tool sharpening rail - 1x divided set upper tool goat foot rail - rear side stop (workpiece guide) - rear sheet metal support table made of stainless steel, with ball rollers - Pneumatically lowerable backgauge fingers - CNC motorized lower beam adjustment
            sheet width 3220 mm
            plate thickness 3,00 mm ST
            thickness at "Niro-steel" 2,00 mm
            daylight opening OW 300 mm
            speed OW 100 mm/sec
            adjustment BW 80,0 mm
            speed BW 120 Grad/sec
            back stop - adjustable k.A. mm
            speed HA 300 mm/sec
            compressed air 6,0 bar
            work height max. 869 mm
            total power requirement 8,8 kW
            voltage 400 V
            weight 5600 kg
            range L-W-H 4575 x 2450 x 1737 mm
            Description :
            ** current new price ~ 220.000 euros
            ** from a maintenance workshop

            Furnishing:
            - Motorized universal folding machine
            * high-precision mechanics with modern control technology
            * for single and series production
            * robust high-speed machine with high axis speeds
            * torsion-free welded construction
            - rotating upper beam / as an automatic tool changing system
            * with 2x tool stations (sharp and goat's foot bending rail)
            * Reduces set-up and idle times
            * Saves time-consuming tool changes and adjustments
            - SCHRÖDER CNC control model POS 2000
            * with touchscreen control panel, swiveling front right
            * Color display
            * USB interface
            * automatic cutting calculation
            * Materials and tools library
            * precise bending simulation
            * Windows XP operating system
            * Swivel control, right front
            - Servo converter controlled drives
            * for bending/upper beam beam & electr. backgauge
            - CNC motorized lower beam adjustment
            - CNC electric backgauge
            * Travel speed 300 mm/sec.
            - with divided / rear sheet metal support surface, including ball transfer units
            - Free-moving double foot switch
            - original instruction manual

            ** Special accessories included :
            - 1x 30° upper tool sharpening rail
            - 1x divided set upper tool goat foot rail
            - rear side stop (workpiece guide)
            - rear sheet metal support table made of stainless steel, with ball rollers
            - Pneumatically lowerable backgauge fingers
            - CNC motorized lower beam adjustment


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER SPB 3200/3,0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355158 · Folding Machine

          SCHROEDER - SPB 3200/3,0 - - 2008 -

          Technical details
          sheet width 3220 mm︱plate thickness 3,0 mm ST︱thickness at "Niro-steel" 2,0 mm︱daylight opening OW 300 mm︱speed OW 100 mm/sec︱adjustment BW 80,0 mm︱speed BW 120 Grad/sec︱back stop - adjustable k.A. mm︱speed HA 300 mm/sec︱compressed air 6,0 bar︱work height max. 869 mm︱total power requirement 8,8 kW︱voltage 400 V︱weight 5600 kg︱range L-W-H 4575 x 2450 x 1737 mm︱
          ** current new price ~ 220.000 euros ** from a maintenance workshop Furnishing: - motorized universal folding machine * High-precision mechanics with modern control technology * for individual and series production * Robust high-speed runner with high axis speeds * Torsion-free welded construction - rotating upper beam / as an automatic tool changing system * with 2x tool stations (sharp and goat's foot bending rail) * Reduces setup and idle times * Saves time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * with touchscreen control panel, pivotable at the front right * Color display * USB interface * automatic crop calculation * Materials and tools library * Dimensionally accurate bending simulation * Windows XP operating system * swiveling operation, right front - Servo inverter controlled drives * for bending/upper beam beam & electric. backgauge - CNC motorized lower beam adjustment - CNC electric back gauge * Travel speed 300 mm/sec. - with divided / rear sheet metal support surface, including ball rollers - freely movable double foot switch - original instruction manual **Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rail - rear side stop (workpiece guide) - rear sheet metal support table made of stainless steel, with ball rollers - pneumatically lowerable back gauge fingers - CNC motorized lower beam adjustment * Machine video: https://www.youtube.com/watch?v=6BV1k5KMoJo * NUMBER OF HOURS: X AXIS .. Total running time 29.470 .. Axis running time 2098 Y AXIS .. Total running time 29.514 .. Axis running time 3728 Z AXIS .. Total running time 29.516 .. Axis running time 9083
            sheet width 3220 mm
            plate thickness 3,0 mm ST
            thickness at "Niro-steel" 2,0 mm
            daylight opening OW 300 mm
            speed OW 100 mm/sec
            adjustment BW 80,0 mm
            speed BW 120 Grad/sec
            back stop - adjustable k.A. mm
            speed HA 300 mm/sec
            compressed air 6,0 bar
            work height max. 869 mm
            total power requirement 8,8 kW
            voltage 400 V
            weight 5600 kg
            range L-W-H 4575 x 2450 x 1737 mm
            Description :
            ** current new price ~ 220.000 euros
            ** from a maintenance workshop

            Furnishing:
            - motorized universal folding machine
            * High-precision mechanics with modern control technology
            * for individual and series production
            * Robust high-speed runner with high axis speeds
            * Torsion-free welded construction
            - rotating upper beam / as an automatic tool changing system
            * with 2x tool stations (sharp and goat's foot bending rail)
            * Reduces setup and idle times
            * Saves time-consuming tool changes and adjustments
            - SCHRÖDER CNC control model POS 2000
            * with touchscreen control panel, pivotable at the front right
            * Color display
            * USB interface
            * automatic crop calculation
            * Materials and tools library
            * Dimensionally accurate bending simulation
            * Windows XP operating system
            * swiveling operation, right front
            - Servo inverter controlled drives
            * for bending/upper beam beam & electric. backgauge
            - CNC motorized lower beam adjustment
            - CNC electric back gauge
            * Travel speed 300 mm/sec.
            - with divided / rear sheet metal support surface, including ball rollers
            - freely movable double foot switch
            - original instruction manual

            **Special accessories included:
            - 1x 30° upper tool sharpening rail
            - 1x split set of upper tool goat's foot rail
            - rear side stop (workpiece guide)
            - rear sheet metal support table made of stainless steel, with ball rollers
            - pneumatically lowerable back gauge fingers
            - CNC motorized lower beam adjustment

            * Machine video:
            https://www.youtube.com/watch?v=6BV1k5KMoJo

            * NUMBER OF HOURS:
            X AXIS .. Total running time 29.470 .. Axis running time 2098
            Y AXIS .. Total running time 29.514 .. Axis running time 3728
            Z AXIS .. Total running time 29.516 .. Axis running time 9083


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76562 · Folding Machine

          SCHRÖDER - MAK 4 - - 2005 -

          Technical details
          sheet width 4020 mm︱plate thickness 4,00 mm︱distance between columns mm︱upper beam stroke 400 mm︱Lowering of bending & lower beam 80 mm︱rated capacity 12,0 kVA︱total power requirement kW︱weight of the machine ca. 10,25 t︱dimensions of the machine ca. m︱
          - Bending beam drive on both sides - Ball screws on the upper beam - Manual crowning device for bending beam - Motorized bending beam adjustment program-controlled - Motorized lower beam adjustment program-controlled - Back gauge 1500 mm can be lowered pneumatically - Graphics control POS 2000 (display control recently renewed) - Sharpening rails 30° and 45° - Bending rail 20 mm
            sheet width 4020 mm
            plate thickness 4,00 mm
            upper beam stroke 400 mm
            Lowering of bending & lower beam 80 mm
            rated capacity 12,0 kVA
            weight of the machine ca. 10,25 t
            Description :
            - Bending beam drive on both sides
            - Ball screws on the upper beam
            - Manual crowning device for bending beam
            - Motorized bending beam adjustment program-controlled
            - Motorized lower beam adjustment program-controlled
            - Back gauge 1500 mm can be lowered pneumatically
            - Graphics control POS 2000 (display control recently renewed)
            - Sharpening rails 30° and 45°
            - Bending rail 20 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER - FASTI FP 40


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76563 · Folding Machine

          SCHRÖDER - FASTI - FP 40 - - 2005 -

          Technical details
          sheet width 4040 mm︱plate thickness 3,00 mm︱distance between columns mm︱upper beam stroke 400 mm︱bending beam adjustment 80 mm︱total power requirement kW︱weight of the machine ca. 9,00 t︱dimensions of the machine ca. 5,65 x 2,60 x 2,00 m︱
          Upper beam stroke: 400 mm Upper beam speed: 65 mm/s Bending beam speed: 85 °/s Bending beam adjustment: 80 mm Bending center adjustment: 80 mm - Motorized bending beam adjustment - Manual bending beam center point adjustment - Manual crowning device - Control CFP 120, 12“ color LCD touch screen display Incl. - Radius function - Push back function - Languages: D, GB, DK, NL - Motorized backgauge up to 10-1600mm - Sharpening rail r 0.5mm 4040mm - 2 x bending rails: 30mm, 10mm - 1 pc. Goatfoot segment o Usable length 4040 mm o r = 0.50 mm, h = 130 mm
            sheet width 4040 mm
            plate thickness 3,00 mm
            upper beam stroke 400 mm
            bending beam adjustment 80 mm
            weight of the machine ca. 9,00 t
            dimensions of the machine ca. 5,65 x 2,60 x 2,00 m
            Description :
            Upper beam stroke: 400 mm
            Upper beam speed: 65 mm/s
            Bending beam speed: 85 °/s
            Bending beam adjustment: 80 mm
            Bending center adjustment: 80 mm

            - Motorized bending beam adjustment
            - Manual bending beam center point adjustment
            - Manual crowning device
            - Control CFP 120, 12“ color LCD touch screen display
            Incl.
            - Radius function
            - Push back function
            - Languages: D, GB, DK, NL
            - Motorized backgauge up to 10-1600mm
            - Sharpening rail r 0.5mm 4040mm
            - 2 x bending rails: 30mm, 10mm
            - 1 pc. Goatfoot segment
            o Usable length 4040 mm
            o r = 0.50 mm, h = 130 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine RAS 73.40


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-788454 · Folding Machine

          RAS - 73.40 - - 2004 -

          Technical details
          sheet width 4000 mm︱plate thickness 2,5 mm︱distance between columns 4060 mm︱Control ︱total power requirement 3 kW︱weight of the machine ca. 5,5 t︱dimensions of the machine ca. m︱
            sheet width 4000 mm
            plate thickness 2,5 mm
            distance between columns 4060 mm
            total power requirement 3 kW
            weight of the machine ca. 5,5 t


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER MAKV 1000x3,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76560 · Folding Machine

          SCHROEDER - MAKV 1000x3,0 - - 2003 -

          Technical details
          sheet width 1020 mm︱plate thickness 3,00 mm︱distance between columns mm︱stroke 120 mm︱total power requirement kW︱weight of the machine ca. 1,010 t︱dimensions of the machine ca. 1,97 x 1,20 x 1,20 m︱
          • Sharpening rail • Bending rails 10 mm, 25 mm • Goat's foot splint H 50 mm, length 745 mm. segmented • Manual backgauge • POS 400 control • Operation manual
            sheet width 1020 mm
            plate thickness 3,00 mm
            stroke 120 mm
            weight of the machine ca. 1,010 t
            dimensions of the machine ca. 1,97 x 1,20 x 1,20 m
            Description :
            • Sharpening rail
            • Bending rails 10 mm, 25 mm
            • Goat's foot splint H 50 mm, length 745 mm. segmented
            • Manual backgauge
            • POS 400 control
            • Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER MPB 3200/2,0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76479 · Folding Machine

          SCHROEDER - MPB 3200/2,0 - - 2002 -

          Technical details
          sheet width 3220 mm︱plate thickness 2,00 mm︱daylight opening 160 mm︱adjustment 80,0 mm︱bending angle max. 120 °︱total power requirement 4,0 kW︱weight 3.965 kg︱range L-W-H 4575 x 2450 x 1550 mm︱
          Furnishing: - Motorized universal folding machine * for single and series production - rotating upper beam / as an automatic tool changing system * Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 * with touch screen control panel * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : * Station 1: 1x pointed rail * Station 2: 1x split goat foot tool - Free-moving double foot switch - Operation manual
            sheet width 3220 mm
            plate thickness 2,00 mm
            daylight opening 160 mm
            adjustment 80,0 mm
            bending angle max. 120 °
            total power requirement 4,0 kW
            weight 3.965 kg
            range L-W-H 4575 x 2450 x 1550 mm
            Description :
            Furnishing:
            - Motorized universal folding machine
            * for single and series production
            - rotating upper beam / as an automatic tool changing system
            * Reduces set-up and idle times
            - SCHRÖDER CNC control model POS 2000
            * with touch screen control panel
            * Color display
            * USB interface
            * automatic cutting calculation
            * Materials and tools library
            * precise bending simulation
            - Servo converter controlled drives
            * for bending/upper beam beam & electr. backgauge
            - CNC motorized lower beam adjustment
            - CNC electrically movable backgauge
            - with rear sheet metal support surface, including ball casters
            - Bending/upper tools :
            * Station 1: 1x pointed rail
            * Station 2: 1x split goat foot tool
            - Free-moving double foot switch
            - Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHROEDER MPB 3200/2,0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355169 · Folding Machine

          SCHROEDER - MPB 3200/2,0 - - 2002 -

          Technical details
          sheet width 3220 mm︱plate thickness 2,0 mm︱daylight opening 160 mm︱adjustment 80,0 mm︱bending angle max. 120 °︱total power requirement 4,0 kW︱weight 3.965 kg︱range L-W-H 4575 x 2450 x 1550 mm︱
          Furnishing: - Motorized universal folding machine * for single and series production - rotating upper beam / as an automatic tool changing system * Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 * with touch screen control panel (without function) * Color display * USB interface * automatic cutting calculation * Materials and tools library * precise bending simulation - Servo converter controlled drives * for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : * Station 1: 1x pointed rail * Station 2: 1x split goat foot tool - Free-moving double foot switch - Operation manual * Machinevideo : https://www.youtube.com/watch?v=2sxnch6uZa4
            sheet width 3220 mm
            plate thickness 2,0 mm
            daylight opening 160 mm
            adjustment 80,0 mm
            bending angle max. 120 °
            total power requirement 4,0 kW
            weight 3.965 kg
            range L-W-H 4575 x 2450 x 1550 mm
            Description :
            Furnishing:
            - Motorized universal folding machine
            * for single and series production
            - rotating upper beam / as an automatic tool changing system
            * Reduces set-up and idle times
            - SCHRÖDER CNC control model POS 2000
            * with touch screen control panel (without function)
            * Color display
            * USB interface
            * automatic cutting calculation
            * Materials and tools library
            * precise bending simulation
            - Servo converter controlled drives
            * for bending/upper beam beam & electr. backgauge
            - CNC motorized lower beam adjustment
            - CNC electrically movable backgauge
            - with rear sheet metal support surface, including ball casters
            - Bending/upper tools :
            * Station 1: 1x pointed rail
            * Station 2: 1x split goat foot tool
            - Free-moving double foot switch
            - Operation manual

            * Machinevideo :
            https://www.youtube.com/watch?v=2sxnch6uZa4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HERA SM 4


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76564 · Folding Machine

          HERA - SM 4 - - 2000 -

          Technical details
          sheet width 2500 mm︱plate thickness 6,00 mm︱distance between columns mm︱upper beam stroke 600 mm︱adjustment lower beam max. 100 mm︱bending beam adjustment max. 100 mm︱connected load OW 5,5 / BW 7,5 kW︱voltage 50 Hz, 400 V︱total power requirement kW︱weight of the machine ca. 7,00 t︱dimensions of the machine ca. m︱
          • Bending angle adjustment via potentiometer • Sharpening rail 45° • Bending rail • Operation manual Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m
            sheet width 2500 mm
            plate thickness 6,00 mm
            upper beam stroke 600 mm
            adjustment lower beam max. 100 mm
            bending beam adjustment max. 100 mm
            connected load OW 5,5 / BW 7,5 kW
            voltage 50 Hz, 400 V
            weight of the machine ca. 7,00 t
            Description :
            • Bending angle adjustment via potentiometer
            • Sharpening rail 45°
            • Bending rail
            • Operation manual

            Dimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 m


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK II 3020 x 2,0


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3350007 · Folding Machine

          SCHRÖDER - MAK II 3020 x 2,0 - - 2000 - POS 500 NC

          Technical details
          sheet width 3020 mm︱plate thickness 2,0 mm︱distance between columns 3000 mm︱Control POS 500 NC ︱stroke 250 mm︱ max. 135 °︱adjustment UW 80 mm︱back stop - adjustable 1000 mm︱work height max. 975 mm︱total power requirement 6,0 kW︱weight of the machine ca. 3350 kg︱dimensions of the machine ca. 4185 x 1650 x 1425 mm︱
          - Dynamic, powerful motorized swivel bending machine - SCHRÖDER POS 500 NC control unit with LCD display * Tool catalog with tool library * Manual, setup and automatic operation * Bending angle correction memory * Collision checking of the individual axes * quick programming of individual parts - swiveling control panel, right front - Electric back gauge, with sheet metal support surface * Travel 1,000 mm - manual lower beam adjustment - Free-moving double foot switch - Operation manual **Machine will be available in approx. 6-8 weeks**
            sheet width 3020 mm
            plate thickness 2,0 mm
            distance between columns 3000 mm
            Control POS 500 NC
            stroke 250 mm
            max. 135 °
            adjustment UW 80 mm
            back stop - adjustable 1000 mm
            work height max. 975 mm
            total power requirement 6,0 kW
            weight of the machine ca. 3350 kg
            dimensions of the machine ca. 4185 x 1650 x 1425 mm
            Description :
            - Dynamic, powerful motorized swivel bending machine
            - SCHRÖDER POS 500 NC control unit with LCD display
            * Tool catalog with tool library
            * Manual, setup and automatic operation
            * Bending angle correction memory
            * Collision checking of the individual axes
            * quick programming of individual parts
            - swiveling control panel, right front
            - Electric back gauge, with sheet metal support surface
            * Travel 1,000 mm
            - manual lower beam adjustment
            - Free-moving double foot switch
            - Operation manual

            **Machine will be available in approx. 6-8 weeks**


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 295-20-3


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76556 · Folding Machine

          FASTI - 295-20-3 - - 1999 -

          Technical details
          sheet width 2040 mm︱plate thickness 3,00 mm︱distance between columns mm︱bending angle 135 °︱upper beam stroke 350 mm︱engine output 4 kW︱total power requirement kW︱weight of the machine ca. 2,50 t︱dimensions of the machine ca. 3,20 X 1,60 X 0,90 m︱
          - with different OW rails, especially segmented tools - Footswitch - Manual operation Machine is repaired, checked, cleaned by a specialist and is then complete functioning. Test run is carried out.
            sheet width 2040 mm
            plate thickness 3,00 mm
            bending angle 135 °
            upper beam stroke 350 mm
            engine output 4 kW
            weight of the machine ca. 2,50 t
            dimensions of the machine ca. 3,20 X 1,60 X 0,90 m
            Description :
            - with different OW rails, especially segmented tools
            - Footswitch
            - Manual operation

            Machine is repaired, checked, cleaned by a specialist and is then complete
            functioning. Test run is carried out.


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2095 - 20 / 3 / M200 CNC


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12062 · Folding Machine

          FASTI - 2095 - 20 / 3 / M200 CNC - - 1999 - Fastimatic M200

          Technical details
          sheet width 2040 mm︱plate thickness 3 mm︱daylight upper clamping 350 mm︱bending angle max. 0-135 °︱adjustment of lower and bend clamping 80 mm︱control Fastimatic M200 ︱power requirement 2,2/1,5 kW︱weight of the machine ca. 2460 kg︱dimensions of the machine ca. 3,2 x 2,8 x 2,1 m︱Electric 400 Volt ︱CNC-control with screen ︱Mot. back gauge 1000 mm︱Foot switch ︱Condition: ready for operation ︱Condition: very good ︱CE signed ︱Video available on our website.
          Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².
            sheet width 2040 mm
            plate thickness 3 mm
            daylight upper clamping 350 mm
            bending angle max. 0-135 °
            adjustment of lower and bend cla. 80 mm
            control Fastimatic M200
            power requirement 2,2/1,5 kW
            weight of the machine ca. 2460 kg
            dimensions of the machine ca. 3,2 x 2,8 x 2,1 m
            Mot. back gauge 1000 mm
            Description :
            Motorized machine with motorized bending beam adjustment for setting the sheet
            thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the
            top cheek stroke, the bending angle and the back gauge with max. 30 working
            steps, emergency stop switch with magnetic holder, back gauge with ball screw
            spindles, CE mark. The bending performance refers to sheets of strength of 400
            N / mm². Little used machine, very good condition - original colour!
            Please notice that the price of a new CNC-machine in this dimension with back
            gauge is about 65000,--.
            Machine dealer with own stock of 1600 m².


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine HM HM KSM-5/2500


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2068 · Folding Machine

          HM - HM KSM-5/2500 - - 1999 -

          Technical details
          gebraucht19998293prompt, Zwischenverkauf vDänemark27800 €︱ 12520 mm︱ 5 mm︱ Motorisch155 °︱ 4+1,5 kW︱ 3950 mm︱ 830 mm︱ 1520 mm︱ 4975 kg︱
          min. Clamping width between upper and lower beam 60 mm Lifting height of upper beam 200 mm Height adjustment/transmitting of the lower beam 60 mm Height adjustment/transmitting of thebending beam 60 mm Bending angle / stepless 0-135° Extended bending angle 0-155° Bending speed 4,77 U/min Lifting and lowering speed of the upper beam 4,5 mm/s Working cycle 90° bending 10 s Motor upper beam 2,2 kW Motor bending beam 5,5 kW Foot pedal Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates User manual in german with Declaration of conformity
            gebraucht
            1999
            8293
            prompt, Zwischenverkauf v
            Dänemark
            27800 €
            1
            2520 mm
            5 mm
            Motorisch
            155 °
            4+1,5 kW
            3950 mm
            830 mm
            1520 mm
            4975 kg
            Description :
            min. Clamping width between upper and lower beam 60 mm
            Lifting height of upper beam 200 mm
            Height adjustment/transmitting of the lower beam 60 mm
            Height adjustment/transmitting of thebending beam 60 mm
            Bending angle / stepless 0-135°
            Extended bending angle 0-155°
            Bending speed 4,77 U/min
            Lifting and lowering speed of the upper beam 4,5 mm/s
            Working cycle 90° bending 10 s
            Motor upper beam 2,2 kW
            Motor bending beam 5,5 kW
            Foot pedal
            Flat rail 45°, Split goat foot rail Height 100 mm Length 2105 mm, Radius rail R 33 mm, Bending beam rail 20 mm, Attachment rail 15 mm, Attachment rail 35 mm, 20 Stk. Replacement break plates
            User manual in german with Declaration of conformity


        • HESSE+CO Maschinenfabrik GesmbH
        • Straße 4 Objekt 8
        • 2351 Wiener Neudorf
        • Österreich

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine EHT MULTISWING 4-32


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355199 · Folding Machine

          EHT - MULTISWING 4-32 - - 1998 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,0 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱
          ** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355199
            sheet width 3200 mm
            plate thickness 4,0 mm
            distance between columns 3300 mm
            daylight opening OW 400 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            clamping capacity max. 200 KN
            air pressure - required 4.5 - 6.0 bar
            total power requirement 9,8 kW
            oil volume 160 l
            weight 8500 kg
            range L-W-H 4550 x 2530 x 2275 mm
            Description :
            ** well-maintained machine with lots of special accessories (!!)
            ** last maintenance/test in JUNE 2023

            Furnishing:
            - CNC screen control CYBELEC model DNC-884-PP32
            * Swivel control panel, front right
            - CNC controlled / electro-motorized back gauge
            * pneumatic / lowerable material stop fingers
            * Adjustment speed max. 250 mm/sec.
            * Drive power 0.5 kw
            * Sheet metal support table at the back
            - motorized lower beam adjustment (S axis)
            * Adjustment range max. 80.0 mm
            - hydraulic swivel movement of the lower beam
            - hydraulic movement of the upper beam
            * Adjustment range max. 400 mm
            * Lifting speed from .. max. 60.0 mm/sec.
            * Lifting speed to .. max. 115 mm/sec.
            - pneumatic upper tool clamping
            - pneumatic lower tool clamping
            - front protection device (swivel range)
            - 1x freely movable double foot switch
            - original operating instructions including electrical circuit diagram +
            hydraulic diagram

            **Special accessories included:
            - 1x split set EHT Geißfuß upper tool.. Height = 231 mm
            * 231 x 110 mm - hardened - 30° degrees
            - 1x split set EHT Geißfuß upper tool.. Height = 144 mm
            * 144 x 110 mm - hardened - 30° degrees
            - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm
            * 32 x 110 mm - hardened - 30° degrees
            - 1x split set EHT lower tool .. width = 15.0 mm
            * 68.5 x 20 mm - Radius 1.0 mm
            - 1x split set EHT lower tool .. width = 30.0 mm
            * 68.5 x 30 mm - Radius 1.0 mm
            - 1x EHT extension for the backgauge

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355199


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine EHT MULTISWING 4-32


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76548 · Folding Machine

          EHT - MULTISWING 4-32 - - 1998 -

          Technical details
          sheet width 3200 mm︱plate thickness 4,00 mm︱distance between columns 3300 mm︱daylight opening OW 400 mm︱adjustment UW 80 mm︱pivoting angle 180 Grad︱clamping capacity max. 200 KN︱air pressure - required 4.5 - 6.0 bar︱total power requirement 9,8 kW︱oil volume 160 l︱weight 8500 kg︱range L-W-H 4550 x 2530 x 2275 mm︱
          ** well-maintained machine with lots of special accessories (!!) ** last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 * Swivel control panel, front right - CNC controlled / electro-motorized back gauge * pneumatic / lowerable material stop fingers * Adjustment speed max. 250 mm/sec. * Drive power 0.5 kw * Sheet metal support table at the back - motorized lower beam adjustment (S axis) * Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam * Adjustment range max. 400 mm * Lifting speed from .. max. 60.0 mm/sec. * Lifting speed to .. max. 115 mm/sec. - pneumatic upper tool clamping - pneumatic lower tool clamping - front protection device (swivel range) - 1x freely movable double foot switch - original operating instructions including electrical circuit diagram + hydraulic diagram **Special accessories included: - 1x split set EHT Geißfuß upper tool.. Height = 231 mm * 231 x 110 mm - hardened - 30° degrees - 1x split set EHT Geißfuß upper tool.. Height = 144 mm * 144 x 110 mm - hardened - 30° degrees - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm * 32 x 110 mm - hardened - 30° degrees - 1x split set EHT lower tool .. width = 15.0 mm * 68.5 x 20 mm - Radius 1.0 mm - 1x split set EHT lower tool .. width = 30.0 mm * 68.5 x 30 mm - Radius 1.0 mm - 1x EHT extension for the backgauge
            sheet width 3200 mm
            plate thickness 4,00 mm
            distance between columns 3300 mm
            daylight opening OW 400 mm
            adjustment UW 80 mm
            pivoting angle 180 Grad
            clamping capacity max. 200 KN
            air pressure - required 4.5 - 6.0 bar
            total power requirement 9,8 kW
            oil volume 160 l
            weight 8500 kg
            range L-W-H 4550 x 2530 x 2275 mm
            Description :
            ** well-maintained machine with lots of special accessories (!!)
            ** last maintenance/test in JUNE 2023

            Furnishing:
            - CNC screen control CYBELEC model DNC-884-PP32
            * Swivel control panel, front right
            - CNC controlled / electro-motorized back gauge
            * pneumatic / lowerable material stop fingers
            * Adjustment speed max. 250 mm/sec.
            * Drive power 0.5 kw
            * Sheet metal support table at the back
            - motorized lower beam adjustment (S axis)
            * Adjustment range max. 80.0 mm
            - hydraulic swivel movement of the lower beam
            - hydraulic movement of the upper beam
            * Adjustment range max. 400 mm
            * Lifting speed from .. max. 60.0 mm/sec.
            * Lifting speed to .. max. 115 mm/sec.
            - pneumatic upper tool clamping
            - pneumatic lower tool clamping
            - front protection device (swivel range)
            - 1x freely movable double foot switch
            - original operating instructions including electrical circuit diagram +
            hydraulic diagram

            **Special accessories included:
            - 1x split set EHT Geißfuß upper tool.. Height = 231 mm
            * 231 x 110 mm - hardened - 30° degrees
            - 1x split set EHT Geißfuß upper tool.. Height = 144 mm
            * 144 x 110 mm - hardened - 30° degrees
            - 1x split set of EHT pointed/upper tools.. Height = 32.0 mm
            * 32 x 110 mm - hardened - 30° degrees
            - 1x split set EHT lower tool .. width = 15.0 mm
            * 68.5 x 20 mm - Radius 1.0 mm
            - 1x split set EHT lower tool .. width = 30.0 mm
            * 68.5 x 30 mm - Radius 1.0 mm
            - 1x EHT extension for the backgauge




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine UNICORN XK 2000/2.0


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76565 · Folding Machine

          UNICORN - XK 2000/2.0 - - 1997 -

          Technical details
          sheet width 2050 mm︱plate thickness 2,00 mm︱daylight opening 145 mm︱bending angle max. 135 / 180 °︱adjustment UW 100 mm︱work height max. 950 mm︱total power requirement manuell kW︱weight of the machine ca. 1650 kg.︱range L-W-H 3250 x 1250 x 1250 mm︱
          Furnishing: - robust manual folding machine - with counterweight - manually adjustable angle fixed stop - Handwheel for manual adjustment of the upper beam - manual adjustment of the lower beam - 2x hand levers for manual swivel execution - manually adjustable material back gauge
            sheet width 2050 mm
            plate thickness 2,00 mm
            daylight opening 145 mm
            bending angle max. 135 / 180 °
            adjustment UW 100 mm
            work height max. 950 mm
            total power requirement manuell kW
            weight of the machine ca. 1650 kg.
            range L-W-H 3250 x 1250 x 1250 mm
            Description :
            Furnishing:
            - robust manual folding machine
            - with counterweight
            - manually adjustable angle fixed stop
            - Handwheel for manual adjustment of the upper beam
            - manual adjustment of the lower beam
            - 2x hand levers for manual swivel execution
            - manually adjustable material back gauge



        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine UNICORN XK 2000/2.0


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9355204 · Folding Machine

          UNICORN - XK 2000/2.0 - - 1997 -

          Technical details
          sheet width 2050 mm︱plate thickness 2.0 mm︱daylight opening 145 mm︱bending angle max. 135 / 180 °︱adjustment UW 100 mm︱work height max. 950 mm︱total power requirement manuell kW︱weight of the machine ca. 1650 kg.︱range L-W-H 3250 x 1250 x 1250 mm︱
          Furnishing: - robust manual folding machine - with counterweight - manually adjustable angle fixed stop - Handwheel for manual adjustment of the upper beam - manual adjustment of the lower beam - 2x hand levers for manual swivel execution - manually adjustable material back gauge * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355204
            sheet width 2050 mm
            plate thickness 2.0 mm
            daylight opening 145 mm
            bending angle max. 135 / 180 °
            adjustment UW 100 mm
            work height max. 950 mm
            total power requirement manuell kW
            weight of the machine ca. 1650 kg.
            range L-W-H 3250 x 1250 x 1250 mm
            Description :
            Furnishing:
            - robust manual folding machine
            - with counterweight
            - manually adjustable angle fixed stop
            - Handwheel for manual adjustment of the upper beam
            - manual adjustment of the lower beam
            - 2x hand levers for manual swivel execution
            - manually adjustable material back gauge

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9355204


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHECHTL MA 200/1


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23057 · Folding Machine

          SCHECHTL - MA 200/1 - - 1996 -

          Technical details
          sheet width 2000 mm︱plate thickness 2 mm︱distance between columns 2100 mm︱total power requirement 6 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,7x1,2x1,1 m︱
          Voltage 380V belt width max. 2000 mm sheet thickness 2 mm Dimensions (LxWxH) approx. 2700x1200x1100 mm
            sheet width 2000 mm
            plate thickness 2 mm
            distance between columns 2100 mm
            total power requirement 6 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,7x1,2x1,1 m
            Description :
            Voltage 380V
            belt width max. 2000 mm
            sheet thickness 2 mm
            Dimensions (LxWxH) approx. 2700x1200x1100 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 2040 x 3,0


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-18316 · Folding Machine

          FASTI - 2040 x 3,0 - - 1995 -

          Technical details
          sheet width 2040 mm︱plate thickness 3,0 mm︱daylight opening mm︱distance between columns 2100 mm︱work height max. mm︱ max. 135 Grad︱total power requirement 4,0 kW︱weight of the machine ca. 2,2 t︱range L-W-H 23,1 x 1,0 x 1,7 m︱
          Furnishing: - Bending angle preselection - Segmented tool - additional bending set - manual backgauge - Dokumentation
            sheet width 2040 mm
            plate thickness 3,0 mm
            distance between columns 2100 mm
            max. 135 Grad
            total power requirement 4,0 kW
            weight of the machine ca. 2,2 t
            range L-W-H 23,1 x 1,0 x 1,7 m
            Description :
            Furnishing:
            - Bending angle preselection
            - Segmented tool
            - additional bending set
            - manual backgauge
            - Dokumentation


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 215-25-5


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76399 · Folding Machine

          FASTI - 215-25-5 - - 1994 -

          Technical details
          sheet width 2540 mm︱plate thickness 5,00 mm︱distance between columns mm︱upper beam stroke 350 mm︱stroke bending beam 80 mm︱total power requirement kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 4,20 x 2,90 x 2,30 m︱
          Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm
            sheet width 2540 mm
            plate thickness 5,00 mm
            upper beam stroke 350 mm
            stroke bending beam 80 mm
            weight of the machine ca. 7,50 t
            dimensions of the machine ca. 4,20 x 2,90 x 2,30 m
            Description :
            Furnishing
            - Upper beam stroke: 350mm
            - Motorized folding beam adjustment
            - controlled backgauge 1000mm (1500mm with repositioning)
            - Control Fm100
            - Geissfusssatz divided height approx. 130mm
            - Sharp rail 45 °
            - Bending bar: 15mm, 20mm + reinforcement bar 35mm
            - Radius rail R16mm, length 2000mm
            - Radius rail R30mm, length 1000mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine FASTI 211 - 25 - 3


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3350014 · Folding Machine

          FASTI - 211 - 25 - 3 - - 1994 -

          Technical details
          sheet width 2540 mm︱plate thickness 3,0 mm︱distance between columns 2500 mm︱back stop - adjustable 1000 mm︱upper clamping bar adjustment 350 mm︱total power requirement 4,62 kW︱dimensions 3800 x 2300 x 1750 mm︱weight of the machine ca. 3050 kg︱
          - lateral protective wall - 1x free moving footswitch - Electrically controlled back gauge
            sheet width 2540 mm
            plate thickness 3,0 mm
            distance between columns 2500 mm
            back stop - adjustable 1000 mm
            upper clamping bar adjustment 350 mm
            total power requirement 4,62 kW
            dimensions 3800 x 2300 x 1750 mm
            weight of the machine ca. 3050 kg
            Description :
            - lateral protective wall
            - 1x free moving footswitch
            - Electrically controlled back gauge



        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine STÜCKMANN + HILLEN 23111


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-76378 · Folding Machine

          STÜCKMANN + HILLEN - 23111 - - 1992 -

          Technical details
          sheet width 3050 mm︱plate thickness 2,00 mm︱distance between columns mm︱stroke 250 mm︱bending beam adjustment 80 mm︱total power requirement kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 4,35 x 2,50 x 1,60 m︱
          • CNC-controlled backgauge 1000mm • NC control Midomat 2000 • Bending rail: 20mm • 45 ° sharp rail
            sheet width 3050 mm
            plate thickness 2,00 mm
            stroke 250 mm
            bending beam adjustment 80 mm
            weight of the machine ca. 5 t
            dimensions of the machine ca. 4,35 x 2,50 x 1,60 m
            Description :
            • CNC-controlled backgauge 1000mm
            • NC control Midomat 2000
            • Bending rail: 20mm
            • 45 ° sharp rail


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Folding Machine SCHRÖDER MAK II


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23127 · Folding Machine

          SCHRÖDER - MAK II - - 1992 - POS 800

          Technical details
          sheet width 3000 mm︱plate thickness 2,5 mm︱distance between columns 3200 mm︱Control POS 800 ︱total power requirement 6 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. B3550x H1550x L2000 mm︱
            sheet width 3000 mm
            plate thickness 2,5 mm
            distance between columns 3200 mm
            Control POS 800
            total power requirement 6 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. B3550x H1550x L2000 mm


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •