pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 155 mm/sec︱work speed 9,5 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱total power requirement 7,5 kW︱weight 6.850 kg︱range L-W-H 3.750x1.950x2.800 mm︱

---

** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler

pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 500 mm︱ram stroke speed 140 mm/sec︱return speed 150 mm/sec︱work speed 10,0 mm/sec︱work stroke 320 mm︱dayligth 590 mm︱table height 905 mm︱oil volume 400 ltr.︱voltage 400 Volt︱working pressure 283 bar︱Number of working hours ~ 21.835 h︱total power requirement 23,0 kW︱weight 18.250 kg︱Dimensions (HxWxD) 4550 x 2250 x 3050 mm︱

---

** current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral port * Pivoting control unit, front left - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - Electric crowning controlled by CNC - Safety device behind the machine - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - CE mark / declaration of conformity - Control cabinet, on the left side - Operation manual ** Special accessories included : - WILA hydraulic tool clamping above - WILA hydraulic tool clamping below - 1x CNC controlled bending aid (AP1) - "Parking" area for bending assistance

pressure 170 t︱chamfer lenght 3170 mm︱distance between columns mm︱stroke 200 mm︱table width 180 mm︱work height max. 960 mm︱Control ︱total power requirement kW︱weight of the machine ca. 11,60 t︱dimensions of the machine ca. m︱

---

• controlled axes: Y1, Y2, X, R, Z1, Z2 • 2 support arms can be moved • Fissler safety laser light barrier • Very large tool package consisting of: Sub tools V35 / 30° length = 3200mm V20/V14 length = 3x835mm V25 length = 4x835mm + 1x415mm V40 length = 835,835,620,420,150,50mm V8/V12. Length = 835, 800, 600, 250mm V20/30° length = 4 x 835mm Adapter 60mm > slot 13 length = 3 x 1040mm Upper tools Straight H130, R 1.5 length = 3300mm Heavily offset H 200, R 0.8 length = 2800mm, segmented Slightly offset H70, R 0.8 length = 3100mm, segmented Slightly offset H70, R 5.0 length = 2920mm Slightly offset H70, R 3.0 length = 3500mm And much more !

pressure 320 t︱chamfer lenght 3200 mm︱distance between columns 2740 mm︱stroke 400 mm︱Center of spindle to wall or column 420 mm︱dayligth 650 mm︱engine output 32,5 kW︱oil volume 350 l︱Control ︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 4,75 x 2,80 x 3,60 m︱

---

Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction

pressure 175 t︱chamfer lenght 3720 mm︱distance between columns 3120 mm︱stroke of upper beam 265 mm︱throat 450 mm︱dayligth 530 mm︱ajustment speed 140 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱Control DNC 880 S ︱work height max. 900 mm︱table width 104 mm︱back stop - adjustable max. 675 mm︱oil volume 250 l︱total power requirement 18.5 kW︱weight 13100 kg︱range L-W-H 4950 x 2400 x 2750 mm︱

---

** New price ~ 84.000 euros ** Special price on request Furnishing: - electro-hydraulic CNC press brake * Stress-relieved steel structure body = durable monoblock frame - CYBELEC CNC control model DNC 880 S * high resolution graphic screen * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library * 2D graphical programming * automatic bending sequence calculation and collision detection * Swivel operation, front right - CNC controlled axes: Y1 + Y2 + X axis - CNC electro-motorized back gauge (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * Back gauge with ball screw + linear guides * Travel X = 675 mm - WILA manual table cambering, adjustment via hand crank - FIESSLER laser safety device at the front - Upper tool holder, with upper wedge crowning & quick-change adapter (AMADA) - Die shoe - manual clamping (AMADA) - various insert/bending tools - 2x front + sliding robust support arms * mounted on a linear guide rail system - side protection device (pivoting doors) - rear protection device (pivoting door) - 1x freely movable foot switch - Operation manual

pressure 160 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱stroke of upper beam 200 mm︱throat 350 mm︱ajustment speed 100 mm/sec︱working feed 9.0 mm/sec︱return speed 86.0 mm/sec︱Control DU 6000 ︱work height max. 910 mm︱table width 240 mm︱oil volume 150 l︱total power requirement 15.0 kW︱weight 9820 kg︱range L-W-H 4200 x 2100 x 2700 mm︱

---

** New price ~ 60.000 euros ** Special price on request Furnishing: - electro-hydraulic CNC press brake * Stress-relieved steel structure body = durable monoblock frame - DURMA DU 6000 CNC control (CYBELEC) * Swivel operation, front right * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Possibility of programming various programs - CNC controlled axes: Y1 + Y2 + X - CNC electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers * including lateral and height adjustment (Z+R axis) - manual table crowning including analogue value display - Upper tool holder, with upper wedge crowning & quick-change adapter (AMADA) - split deer foot upper tool + additional tools (picture 9) - split 4V universal die, in 60 die shoe (AMADA) - 2x front - sliding support arms - side protection device (pivoting doors) - rear protection device (pivoting door) - 1x freely movable 2 hand/foot control - Operation manual

pressure 100 t︱chamfer lenght 2050 mm︱distance between columns mm︱stroke 415 mm︱dayligth 550 mm︱working flow 10 mm/s︱Control ︱total power requirement 7,50 kW︱weight of the machine ca. 7,50 t︱dimensions of the machine ca. 3,00 x 2,30 x 3,20 m︱

---

• Control CYBELEC ModEva 12S • Controlled axes: Y1, Y2, X, X1, R, Z1, Z2 • CNC controlled crowning • Fiessler light barrier at the front • Hydraulic tool clamping RFA above + below • Tool package: Stamp P4 RFA Radius 3 mm 88° Height 175 mm: 1720mm

pressure 075 t︱chamfer lenght 2620 mm︱distance between columns 2055 mm︱column arm 400 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 90,0 mm/sec︱stroke ~ 140 mm︱dayligth ~ 360 mm︱table height 930 mm︱table width 85,0 mm︱Control ELGO P8822 ︱oil volume 150 ltr.︱engine output 7,5 kW︱weight of the machine ca. ~ 6.500 kg.︱range L-W-H 3700 x 1800 x 2700 mm︱

---

Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit * digital position indicator * Entry of target/actual values possible - Electro-motor backgauge - X axis * Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lateral protective device (door) - 1x dual free-moving footswitch - User manual (PDF)

pressure 200 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 400 mm︱ram stroke speed 100 mm/sec︱return speed 9.0 mm/sec︱work speed 90.0 mm/sec︱work stroke 200 mm︱dayligth 447 mm︱table height 900 mm︱table width 240 mm︱oil volume 200 ltr.︱voltage 400 Volt︱total power requirement 15.0 kW︱weight 11600 kg︱Dimensions (HxWxD) 4550 x 2250 x 2850 mm︱

---

** current new price approx. 80.000 euros ** Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP * swiveling operation, front left * numerical control * Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) * with 2x manually adjustable stop fingers (R+Z axis) * Travel X = 800 mm - manual table cambering, adjustment via handwheel * with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x set of split upper tools - 1x MULTI V reversible die block - SICK light barrier in front of the machine (safety device) - Light barrier behind the machine (safety device) - side protection device (pivoting doors) - 2x front support arms "sliding system", with T-slot and tilting cam - 1x freely movable double foot control - User manual (PDF)

pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱stroke of upper beam 120 mm︱throat 250 mm︱dayligth 325 mm︱working feed 7.0 mm/sec︱return speed 60.0 mm/sec︱ 300 bar︱Control ATL 550 ︱work height max. 915 mm︱table width 180 mm︱total power requirement 7.5 kW︱weight 8250 kg︱range L-W-H 3500 x 1700 x 2380 mm︱

---

Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back gauge (X) * Positioning of the depth adjustment (Y1+Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotating MULTI V die block (lower tool) - side protection device (pivoting doors) - 1x freely movable foot control - 2x front, stable material support arms - User manual (PDF)

pressure 090 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱column arm 310 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 80,0 mm/sec︱back stop - adjustable ca. 725 mm︱stroke 120 mm︱dayligth 475 mm︱table height 860 mm︱oil volume 130 ltr.︱total power requirement 11,0 kW︱weight of the machine ca. 5500 kg.︱

---

** good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (“sliding” system) - side protective grilles - freely movable foot control - Operation manual **Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85°

pressure 060 t︱chamfer lenght 2050 mm︱distance between columns mm︱number of strokes - stepless ︱compressed air 8 bar︱closing speed 200 mm/sec︱total power requirement kW︱weight of the machine ca. 6,00 t︱dimensions of the machine ca. 3,00 x 2,10 x 2,35 m︱

---

• Controlled axes: Y1, Y2, X, R, Z1, Z2 • Hydraulic tool clamping above + below • CNC controlled crowning • 2 support arms • 1 set of upper tools, length approx. 2200mm, R1, segmented • 1 die set V12/88°, length approx. 2000mm, segmented

pressure 045 t︱chamfer lenght 2050 mm︱distance between columns 1600 mm︱column arm 300 mm︱stroke 150 mm︱dayligth 395 mm︱ajustment speed 100 mm/sec︱working feed 1-10 mm/sec︱return speed 70,0 mm/sec︱table width 60,0 mm︱table height 905 mm︱oil volume 150 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 5,5 KW︱weight of the machine ca. 3500 kg︱range L-W-H 2900 x 2100 x 2420 mm︱

---

** good / well-maintained condition (!!) Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram

pressure 110 t︱chamfer lenght 3110 mm︱distance between columns 2690 mm︱column arm 420 mm︱stroke 200 mm︱dayligth 470 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 80.0 mm/sec︱table width 100 mm︱table height 1000 mm︱back stop - adjustable max. 450 mm︱Number of working hours ~ 7.670 h︱oil volume 200 l︱voltage 400 V︱total power requirement 7.5 kW︱weight of the machine ca. 7700 kg︱range L-W-H 3600 x 1715 x 2410 mm︱

---

** Machine with only approx. 7.670 operating hours (!!) Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control model DA 619 * Swivel control panel, front left * Screen 12" LCD - 4 shades of gray * 90x tools & 2,500 programs can be saved - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) * Travel .. 450 mm * Travel speed .. 350 mm/sec. - CNC controlled height adjustment from the back gauge (R axis) * Travel .. 340 mm * Travel speed 100 mm/sec. - CNC controlled adjustment of the stop fingers (Z axis) - manual table cambering (wedge system left/right) - TRUMPF manual upper tool clamping - TRUMPF manual lower tool clamping - 1x freely movable foot control - LAZER SAFE safety device - front - Rear safety device (pivoting doors) - Safety device on the side (pivoting doors) - original instruction manual

pressure 100 t︱chamfer lenght 3140 mm︱distance between columns 2700 mm︱column arm 420 mm︱dayligth 470 mm︱stroke 200 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱table width 60.0 mm︱table height 960 mm︱oil volume 150 L︱0 300 bar︱controlled axis 8 Anzahl︱Number of working hours 47.800 h︱total power requirement 12.5 KW︱weight of the machine ca. 7150 kg︱range L-W-H 4295 x 2285 x 2635 mm︱

---

** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R

pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 265 bar︱voltage 380 V︱total power requirement 18,7 kW︱weight 15000 kg︱range L-W-H 4400 x 1900 x 3000 mm︱

---

Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual

pressure 135 t︱chamfer lenght 4050 mm︱distance between columns 3150 mm︱throat 200 mm︱dayligth 310 mm︱piston stroke 130 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 65.0 mm/sec︱table width 180 mm︱table height 900 mm︱Control ELGO P8822 ︱pressure 220 bar︱total power requirement 8.5 kW︱weight 8700 kg︱range L-W-H 4500 x 1700 x 2640 mm︱

---

** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR)

pressure 050 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱

---

** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R

pressure 200 t︱chamfer lenght 3660 mm︱distance between columns mm︱Control ︱total power requirement kW︱weight of the machine ca. 13,50 t︱dimensions of the machine ca. m︱

---

• 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual

pressure 125 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱throat 300 mm︱stroke 240 mm︱dayligth 640 mm︱quantity of oil 250 l︱ ︱total power requirement kW︱weight of the machine ca. 15,00 t︱dimensions of the machine ca. m︱

---

• Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m

pressure 180 t︱chamfer lenght 3700 mm︱distance between columns 3250 mm︱throat 270 mm︱stroke 220 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 58,0 mm/sec︱dayligth 395 mm︱table width 200 mm︱work height max. 870 mm︱oil volume 210 ltr.︱total power requirement 15,0 kW︱weight of the machine ca. 12100 kg.︱range L-W-H 4200 x 1470 x 2550 mm︱

---

** from a maintenance workshop (!!) Furnishing: - conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) * with 2x manually adjustable stop fingers * Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V universal matrix block - 2x front / sliding support arms - freely movable 2-hand foot control - Operation manual

pressure 320 t︱chamfer lenght 4080 mm︱distance between columns 3680 mm︱throat 410 mm︱ajustment speed 150 mm/sec︱return speed 135 mm/sec︱bending speed 10 mm/sec︱height of stroke 365 mm︱dayligth 535 mm︱total power requirement kW︱weight of the machine ca. ca. 24 t︱dimensions of the machine ca. 4,65 x 2,31 x 3,10 m︱

---

• 2D graphics control Delem DA • pneumatic matrices displacement • 2 movable support arms • Hydraulic tool clamping at the top and bottom • CNC controlled crowning • controlled axes: Y1, Y2, X, R1, R2, Z1, Z2

pressure 050 t︱chamfer lenght 1275 mm︱distance between columns 1040 mm︱column arm 410 mm︱table width 100 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱stroke 215 mm︱tiltable up to +/- 10 mm︱table height 1050 mm︱dayligth 385 mm︱oil volume 80 ltr.︱travel -x axis 500 X-Weg mm︱traversing speed 300 R-Weg mm︱compressed air 6,0 bar︱total power requirement 8,0 KVA︱weight of the machine ca. 4750 kg.︱range L-W-H 2000 x 2000 x 2380 mm︱

---

** Machine with full equipment (all axes controlled)! Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - Operation manual

pressure 230 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱column arm 300 mm︱table width 200 mm︱dayligth 450 mm︱stroke 200 mm︱back stop - adjustable 500 mm︱working feed 7,0 mm/sec︱return speed 80,0 mm/sec︱work height max. 965 mm︱oil volume 275 l︱Pressure power 265 bar︱total power requirement 18,7 kW︱weight of the machine ca. 13300 kg.︱range L-W-H 4100 x 2200 x 2670 mm︱

---

Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) * Pivoting control panel in front left - CNC electric backgauge (X axis) * with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning * Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control