,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake ERMAK POWER BEND FALCON 26.100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308335 · Hydr. pressbrake

          ERMAK - POWER BEND FALCON 26.100 - - 2017 -

          Technical details
          pressure 100 t︱chamfer lenght 2600 mm︱distance between columns 2200 mm︱column arm 410 mm︱ram stroke speed 200 mm/sec︱return speed 155 mm/sec︱work speed 9,5 mm/sec︱work stroke 275 mm︱dayligth 530 mm︱table height 900 mm︱table width 90,0 mm︱oil volume 150 ltr.︱voltage 400 Volt︱Number of working hours ~ 1.990 h︱total power requirement 7,5 kW︱weight 6.850 kg︱range L-W-H 3.750x1.950x2.800 mm︱
          ** Current new price ~ 60.000 euros ** Special price on request ** from a maintenance workshop - good condition ** with only approx. 1.990 operating hours (!!) -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) * 2D graphical programming * 10.4" TFT color screen with high resolution * Bending sequence calculation * USB interface - Swiveling control panel, mounted on the left - CNC motorized backgauge with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes Y1 - Y2 - X - R - C (crowning) - CNC electric table crowning - divided deer foot upper tool Rolleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Divided universal die block Rolleri M 460 R, including die shoe - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical system - Safety device = light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - Operation manual machine + CNC controler * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335 * Machinevideo : https://www.youtube.com/watch?v=t9gPmzchB6Y
            pressure 100 t
            chamfer lenght 2600 mm
            distance between columns 2200 mm
            column arm 410 mm
            ram stroke speed 200 mm/sec
            return speed 155 mm/sec
            work speed 9,5 mm/sec
            work stroke 275 mm
            dayligth 530 mm
            table height 900 mm
            table width 90,0 mm
            oil volume 150 ltr.
            voltage 400 Volt
            Number of working hours ~ 1.990 h
            total power requirement 7,5 kW
            weight 6.850 kg
            range L-W-H 3.750x1.950x2.800 mm
            Description :
            ** Current new price ~ 60.000 euros
            ** Special price on request
            ** from a maintenance workshop - good condition
            ** with only approx. 1.990 operating hours (!!)

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA-56 (ER 70)
            * 2D graphical programming
            * 10.4" TFT color screen with high resolution
            * Bending sequence calculation
            * USB interface
            - Swiveling control panel, mounted on the left
            - CNC motorized backgauge with R axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - CNC controlled axes Y1 - Y2 - X - R - C (crowning)
            - CNC electric table crowning
            - divided deer foot upper tool Rolleri 135.85.R08, "System A"
            - with additional crowning of the upper wedge
            - Divided universal die block Rolleri M 460 R, including die shoe
            - BOSCH/HOERBIGER hydraulic components
            - SIEMENS electrical system
            - Safety device = light barrier behind the machine
            - FIESSLER AKAS laser with FPSC protective device in front of the machine
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x free-moving double foot control
            - Operation manual machine + CNC controler

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308335

            * Machinevideo :
            https://www.youtube.com/watch?v=t9gPmzchB6Y


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APHS 31.300


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308242 · Hydr. pressbrake

          BAYKAL - APHS 31.300 - - 2013 -

          Technical details
          pressure 300 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 500 mm︱ram stroke speed 110 mm/sec︱return speed 100 mm/sec︱work speed 8,0 mm/sec︱work stroke 420 mm︱dayligth 870 mm︱table height 905 mm︱oil volume 280 ltr.︱voltage 400 Volt︱working pressure 283 bar︱Number of working hours ~ 21.835 h︱total power requirement 23,0 kW︱weight 18.250 kg︱Dimensions (HxWxD) 4550 x 2250 x 3300 mm︱
          ** current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral port * Pivoting control unit, front left - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - Electric crowning controlled by CNC - Safety device behind the machine - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms "Sliding-System", with T-slot and cam - 1x free-moving double foot control - CE mark / declaration of conformity - Control cabinet, on the left side - Operation manual ** Special accessories included : - WILA hydraulic tool clamping above - WILA hydraulic tool clamping below - 1x CNC controlled bending aid (AP1) - "Parking" area for bending assistance * Machinevideo : https://www.youtube.com/watch?v=lT0APHnn9Js
            pressure 300 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 500 mm
            ram stroke speed 110 mm/sec
            return speed 100 mm/sec
            work speed 8,0 mm/sec
            work stroke 420 mm
            dayligth 870 mm
            table height 905 mm
            oil volume 280 ltr.
            voltage 400 Volt
            working pressure 283 bar
            Number of working hours ~ 21.835 h
            total power requirement 23,0 kW
            weight 18.250 kg
            Dimensions (HxWxD) 4550 x 2250 x 3300 mm
            Description :
            ** current new price ~ 135.000 euros

            --------------------------------------------------
            Press brake with special equipment
            * increased installation height
            * increased cylinder stroke
            * as well as increased bending beam speeds
            --------------------------------------------------

            Furnishing:
            - DELEM CNC control model DA 66T (touch screen)
            * 2D graphic touch screen programming mode
            * 17" high-resolution color TFT
            * Complete Windows application suite
            * Delem Modusys compatibility (module scalability and adaptivity)
            * USB, peripheral port
            * Pivoting control unit, front left
            - Motorized backgauge with R-axis, on ball screws
            - X = 800 mm R = 250 mm with 2 stop fingers
            - CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1
            - 2x CNC electrically movable stop fingers
            - Electric crowning controlled by CNC
            - Safety device behind the machine
            - FIESSLER AKAS laser protection device in front of the machine
            - 2x front support arms "Sliding-System", with T-slot and cam
            - 1x free-moving double foot control
            - CE mark / declaration of conformity
            - Control cabinet, on the left side
            - Operation manual

            ** Special accessories included :
            - WILA hydraulic tool clamping above
            - WILA hydraulic tool clamping below
            - 1x CNC controlled bending aid (AP1)
            - "Parking" area for bending assistance

            * Machinevideo :
            https://www.youtube.com/watch?v=lT0APHnn9Js


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BOSCHERT PB 2575


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308327 · Hydr. pressbrake

          BOSCHERT - PB 2575 - - 2008 - ELGO P8822

          Technical details
          pressure 75,0 t︱chamfer lenght 2620 mm︱distance between columns 2055 mm︱column arm 400 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 90,0 mm/sec︱stroke ~ 140 mm︱dayligth ~ 360 mm︱table height 930 mm︱table width 85,0 mm︱Control ELGO P8822 ︱oil volume 150 ltr.︱engine output 7,5 kW︱weight of the machine ca. ~ 6.500 kg.︱range L-W-H 3700 x 1800 x 2700 mm︱
          Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit * digital position indicator * Entry of target/actual values possible - Electro-motor backgauge - X axis * Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lateral protective device (door) - 1x dual free-moving footswitch - User manual (PDF) * Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308327
            pressure 75,0 t
            chamfer lenght 2620 mm
            distance between columns 2055 mm
            column arm 400 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 90,0 mm/sec
            stroke ~ 140 mm
            dayligth ~ 360 mm
            table height 930 mm
            table width 85,0 mm
            Control ELGO P8822
            oil volume 150 ltr.
            engine output 7,5 kW
            weight of the machine ca. ~ 6.500 kg.
            range L-W-H 3700 x 1800 x 2700 mm
            Description :
            Furnishing:
            - electro-hydraulic conventional NC press brake
            - Swivel control front right, with ELGO P8822 control unit
            * digital position indicator
            * Entry of target/actual values possible
            - Electro-motor backgauge - X axis
            * Travel = 700mm
            - electrical adjustment of the immersion depth - Y axes
            - with 2x manually adjustable stop fingers (R+Z axis)
            - Upper tool holder with upper wedge crowning - AMADA system
            - Lower tool holder - System AMADA
            - very many diverse / divided upper tools
            - rear guard (door)
            - lateral protective device (door)
            - 1x dual free-moving footswitch
            - User manual (PDF)

            * Machinelink :
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308327


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 30.150


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308386 · Hydr. pressbrake

          HACO - PPM 30.150 - - 2008 - ATL 550

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱stroke of upper beam 120 mm︱throat 250 mm︱dayligth 325 mm︱working feed 7.0 mm/sec︱return speed 60.0 mm/sec︱ 300 bar︱Control ATL 550 ︱work height max. 915 mm︱table width 180 mm︱total power requirement 7.5 kW︱weight 8250 kg︱range L-W-H 3500 x 1700 x 2380 mm︱
          Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back gauge (X) * Positioning of the depth adjustment (Y1+Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotating MULTI V die block (lower tool) - side protection device (pivoting doors) - 1x freely movable foot control - 2x front, stable material support arms - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            stroke of upper beam 120 mm
            throat 250 mm
            dayligth 325 mm
            working feed 7.0 mm/sec
            return speed 60.0 mm/sec
            300 bar
            Control ATL 550
            work height max. 915 mm
            table width 180 mm
            total power requirement 7.5 kW
            weight 8250 kg
            range L-W-H 3500 x 1700 x 2380 mm
            Description :
            Furnishing:
            - simple NC controlled hydraulic press brake, including torsion shaft
            - including ATLANTIC NC control ATL 550
            * Positioning of the back gauge (X)
            * Positioning of the depth adjustment (Y1+Y2)
            * Possibility of programming various programs
            * Storage capacity max. 200 programs - max. 400 sets
            * Swivel control panel, front left
            - electro-motorized, stepless depth adjustment (Y1+Y2 axis)
            - electro-motorized back gauge (X axis)
            * 2x manually adjustable stop fingers
            - manual table crowning, including analogue value display
            - 1x split upper tool set - "HACO" holder
            - 1x rotating MULTI V die block (lower tool)
            - side protection device (pivoting doors)
            - 1x freely movable foot control
            - 2x front, stable material support arms
            - User manual (PDF)

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APH-S 2606x90


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308286 · Hydr. pressbrake

          BAYKAL - APH-S 2606x90 - - 2006 -

          Technical details
          pressure 90,0 t︱chamfer lenght 2600 mm︱distance between columns 2050 mm︱column arm 310 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 80,0 mm/sec︱back stop - adjustable ca. 725 mm︱stroke 120 mm︱dayligth 475 mm︱table height 860 mm︱oil volume 130 ltr.︱total power requirement 11,0 kW︱weight of the machine ca. 5500 kg.︱
          ** good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (“sliding” system) - side protective grilles - freely movable foot control - Operation manual **Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286
            pressure 90,0 t
            chamfer lenght 2600 mm
            distance between columns 2050 mm
            column arm 310 mm
            ajustment speed 80,0 mm/sec
            working feed 10,0 mm/sec
            return speed 80,0 mm/sec
            back stop - adjustable ca. 725 mm
            stroke 120 mm
            dayligth 475 mm
            table height 860 mm
            oil volume 130 ltr.
            total power requirement 11,0 kW
            weight of the machine ca. 5500 kg.
            Description :
            ** good condition (!!)

            Furnishing:
            - electro-hydraulic CNC press brake
            - with DELEM CNC control model DA 66W
            * 2D graphical programming
            * automatic bending sequence calculation and collision detection
            * high quality color LCD screen (TFT)
            - swiveling operation, front left
            - controlled axes: Y1 + Y2 + X + R + CNC crowning
            - electric back gauge, on ball screws
            - with 2x manually adjustable stop fingers
            - motorized, electric CNC crowning
            - Upper tool holder system A (Amada), with upper wedge crowning
            - Lower tool holder Sysetm A (Amada)
            - LAZER Safe front laser protection device
            - 2x front, sliding support arms (“sliding” system)
            - side protective grilles
            - freely movable foot control
            - Operation manual

            **Special accessories included:
            - UKB tool adapter (13x pieces)
            - UKB tool clamping plates (13x pieces)
            - split ROLLERI upper tool 85°
            - split ROLLERI 4V reversible die 85°

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308286


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake GASPARINI PBS 45/2000 FP


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308356 · Hydr. pressbrake

          GASPARINI - PBS 45/2000 FP - - 2003 -

          Technical details
          pressure 45,0 t︱chamfer lenght 2050 mm︱distance between columns 1600 mm︱column arm 300 mm︱stroke 150 mm︱dayligth 395 mm︱ajustment speed 100 mm/sec︱working feed 1-10 mm/sec︱return speed 70,0 mm/sec︱table width 60,0 mm︱table height 905 mm︱oil volume 150 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 5,5 KW︱weight of the machine ca. 3500 kg︱range L-W-H 2900 x 2100 x 2420 mm︱
          ** good / well-maintained condition (!!) Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356
            pressure 45,0 t
            chamfer lenght 2050 mm
            distance between columns 1600 mm
            column arm 300 mm
            stroke 150 mm
            dayligth 395 mm
            ajustment speed 100 mm/sec
            working feed 1-10 mm/sec
            return speed 70,0 mm/sec
            table width 60,0 mm
            table height 905 mm
            oil volume 150 l
            operating pressure 340 bar
            voltage 400 V
            total power requirement 5,5 KW
            weight of the machine ca. 3500 kg
            range L-W-H 2900 x 2100 x 2420 mm
            Description :
            ** good / well-maintained condition (!!)

            Furnishing:
            - DELEM CNC control model DA 65
            * Swivel control panel, front right
            * 2D graphical programming & product display
            * Tool & program library
            * including new screen (installed 11/2023 .. 1.200 euros)
            - CNC controlled axes: Y1 + Y2 / X / R axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - manual adjustment of the 2x stop fingers (Z axis)
            - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning
            - AMADA SYSTEM A lower tool clamping
            - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S)
            - 1x freely movable foot switch
            - 2x front support arms
            - 1x set of AMADA-SYSTEM A bending tools
            - Rear safety device (lockable door)
            - Safety device on the side (pivoting doors)
            - Control instructions (PDF) + machine circuit diagram

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308356


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA HFE 100.3


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308373 · Hydr. pressbrake

          AMADA - HFE 100.3 - - 2002 -

          Technical details
          pressure 100 t︱chamfer lenght 3140 mm︱distance between columns 2700 mm︱column arm 420 mm︱dayligth 470 mm︱stroke 200 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱table width 60.0 mm︱table height 960 mm︱oil volume 150 L︱0 300 bar︱controlled axis 8 Anzahl︱Number of working hours 47.800 h︱total power requirement 12.5 KW︱weight of the machine ca. 7150 kg︱range L-W-H 4295 x 2285 x 2635 mm︱
          ** maintained condition (!!) ** with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left * Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) * Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) * Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373
            pressure 100 t
            chamfer lenght 3140 mm
            distance between columns 2700 mm
            column arm 420 mm
            dayligth 470 mm
            stroke 200 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            table width 60.0 mm
            table height 960 mm
            oil volume 150 L
            0 300 bar
            controlled axis 8 Anzahl
            Number of working hours 47.800 h
            total power requirement 12.5 KW
            weight of the machine ca. 7150 kg
            range L-W-H 4295 x 2285 x 2635 mm
            Description :
            ** maintained condition (!!)
            ** with approx. 47.800 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            * Tool & program library
            - CNC-controlled back gauge adjustment (X1+X2 axis)
            * Adjustment range .. 700 mm
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            * Adjustment range .. 250 mm
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308373


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPTE 40.200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308224 · Hydr. pressbrake

          ATLANTIC - HPTE 40.200 - - 2001 - NC ATL 550

          Technical details
          pressure 200 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 265 bar︱voltage 380 V︱total power requirement 18,7 kW︱weight 15000 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible MultiV - universal die block - rear + side protection - 2x front / robust support arms - free-moving 2-hand / double-foot operation - Operation manual
            pressure 200 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 265 bar
            voltage 380 V
            total power requirement 18,7 kW
            weight 15000 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake, with torsion shaft
            - with ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric backgauge, on ball screws
            * with 2 stop fingers, manually adjustable
            - manual table crowning, with analogue display
            * Adjustment at the front left, with a hand crank
            - divided deer foot upper tool 85°
            - reversible MultiV - universal die block
            - rear + side protection
            - 2x front / robust support arms
            - free-moving 2-hand / double-foot operation
            - Operation manual


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake LVD PPBL 135/40


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308370 · Hydr. pressbrake

          LVD - PPBL 135/40 - - 2001 - ELGO P8822

          Technical details
          pressure 135 t︱chamfer lenght 4050 mm︱distance between columns 3150 mm︱throat 200 mm︱dayligth 310 mm︱piston stroke 130 mm︱ajustment speed 100 mm/sec︱working feed 8.0 mm/sec︱return speed 65.0 mm/sec︱table width 180 mm︱table height 900 mm︱Control ELGO P8822 ︱pressure 220 bar︱total power requirement 8.5 kW︱weight 8700 kg︱range L-W-H 4500 x 1700 x 2640 mm︱
          ** from a maintenance workshop ** maintained condition (!!) Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model "P8822" * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Swivel control panel, front right - electro-motorized back gauge (X axis) * with digital ELGO position display * 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm - 1x freely movable 2 hand/foot control - 2x front support arms - Protective device on the side + behind the machine - Operating instructions + circuit diagram (FR) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370
            pressure 135 t
            chamfer lenght 4050 mm
            distance between columns 3150 mm
            throat 200 mm
            dayligth 310 mm
            piston stroke 130 mm
            ajustment speed 100 mm/sec
            working feed 8.0 mm/sec
            return speed 65.0 mm/sec
            table width 180 mm
            table height 900 mm
            Control ELGO P8822
            pressure 220 bar
            total power requirement 8.5 kW
            weight 8700 kg
            range L-W-H 4500 x 1700 x 2640 mm
            Description :
            ** from a maintenance workshop
            ** maintained condition (!!)

            Furnishing:
            - simple NC electro-hydraulic press brake
            - with ELGO digital control unit - model "P8822"
            * Positioning of the back gauge (X axis)
            * Positioning of the depth adjustment (Y1+Y2 axis)
            * Swivel control panel, front right
            - electro-motorized back gauge (X axis)
            * with digital ELGO position display
            * 2x manually adjustable stop fingers (R+Z axis)
            - WILA manual table cambering, with analogue actual value display
            - split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html
            - 1x rotating universal die block. Dimensions 90.0 x 90.0 mm
            * V openings: 8.0 / 10.0 / 15.0 / 25.0 / 40.0 / 55.0 mm
            - 1x freely movable 2 hand/foot control
            - 2x front support arms
            - Protective device on the side + behind the machine
            - Operating instructions + circuit diagram (FR)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308370


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake AMADA HFE 50-20


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308383 · Hydr. pressbrake

          AMADA - HFE 50-20 - - 2000 -

          Technical details
          pressure 50.0 t︱chamfer lenght 2090 mm︱distance between columns 1665 mm︱column arm 400 mm︱table width 60,0 mm︱ajustment speed 100 mm/sec︱working feed 10.0 mm/sec︱return speed 100 mm/sec︱stroke 200 mm︱table height 910 mm︱dayligth 470 mm︱Number of working hours 27.900 h︱total power requirement 6.0 KW︱weight of the machine ca. 4850 kg︱range L-W-H 3458 x 2450 x 2450 mm︱
          ** maintained condition (!!) ** with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) * swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivoting doors) * incl. SICK safety device - light barrier - rear protection device (pivoting door) - EMERGENCY stop button at the front - CE marking - original instruction manual * Special accessories included: - 1x brand new ROLLERI upper tool set (divided) * TYPE PS.135.85.R08 - 1x brand new ROLLERI lower tool set (divided) * TYPE M.460.R * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383 * Machinevideo : https://www.youtube.com/watch?v=lzJmJ7FbpO4
            pressure 50.0 t
            chamfer lenght 2090 mm
            distance between columns 1665 mm
            column arm 400 mm
            table width 60,0 mm
            ajustment speed 100 mm/sec
            working feed 10.0 mm/sec
            return speed 100 mm/sec
            stroke 200 mm
            table height 910 mm
            dayligth 470 mm
            Number of working hours 27.900 h
            total power requirement 6.0 KW
            weight of the machine ca. 4850 kg
            range L-W-H 3458 x 2450 x 2450 mm
            Description :
            ** maintained condition (!!)
            ** with only approx. 27.900 operating hours

            Furnishing:
            - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2)
            * swiveling operation - front left
            - CNC-controlled back gauge adjustment (X1+X2)
            - CNC-controlled vertical adjustment of the stop fingers (R1+R2)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - Hand control device for manual movement of the axes
            - AMADA manual upper tool clamping system
            - 1x freely movable foot switch
            - side protection device (pivoting doors)
            * incl. SICK safety device - light barrier
            - rear protection device (pivoting door)
            - EMERGENCY stop button at the front
            - CE marking
            - original instruction manual

            * Special accessories included:
            - 1x brand new ROLLERI upper tool set (divided)
            * TYPE PS.135.85.R08
            - 1x brand new ROLLERI lower tool set (divided)
            * TYPE M.460.R

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308383

            * Machinevideo :
            https://www.youtube.com/watch?v=lzJmJ7FbpO4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BAYKAL APH 3708 x 180


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308364 · Hydr. pressbrake

          BAYKAL - APH 3708 x 180 - - 1999 -

          Technical details
          pressure 180 t︱chamfer lenght 3700 mm︱distance between columns 3250 mm︱throat 270 mm︱stroke 220 mm︱ajustment speed 80,0 mm/sec︱working feed 10,0 mm/sec︱return speed 58,0 mm/sec︱dayligth 395 mm︱table width 200 mm︱work height max. 870 mm︱oil volume 210 ltr.︱total power requirement 15,0 kW︱weight of the machine ca. 12100 kg.︱range L-W-H 4200 x 1470 x 2550 mm︱
          ** from a maintenance workshop (!!) Furnishing: - conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) * with 2x manually adjustable stop fingers * Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V universal matrix block - 2x front / sliding support arms - freely movable 2-hand foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364 * Machine video : https://www.youtube.com/watch?v=9oX5Pqdc18s
            pressure 180 t
            chamfer lenght 3700 mm
            distance between columns 3250 mm
            throat 270 mm
            stroke 220 mm
            ajustment speed 80,0 mm/sec
            working feed 10,0 mm/sec
            return speed 58,0 mm/sec
            dayligth 395 mm
            table width 200 mm
            work height max. 870 mm
            oil volume 210 ltr.
            total power requirement 15,0 kW
            weight of the machine ca. 12100 kg.
            range L-W-H 4200 x 1470 x 2550 mm
            Description :
            ** from a maintenance workshop (!!)

            Furnishing:
            - conventional electro-hydraulic press brake
            * with torsion shaft for parallelism of the upper beam
            - electric back gauge, with ball screws (X axis)
            * with 2x manually adjustable stop fingers
            * Fine adjustment via handwheel at the front, with analogue position display
            - electro-motor adjustment of the immersion depth (Y1+Y2 axis)
            * with digital position display
            - swiveling operation, mounting side on the left
            - 1x set of upper tools / additional divided tools
            - 1x rotating Multi V universal matrix block
            - 2x front / sliding support arms
            - freely movable 2-hand foot control
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308364

            * Machine video :
            https://www.youtube.com/watch?v=9oX5Pqdc18s


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308349 · Hydr. pressbrake

          TRUMPF - TrumaBend V50 - - 1999 -

          Technical details
          pressure 50,0 t︱chamfer lenght 1275 mm︱distance between columns 1040 mm︱column arm 410 mm︱table width 100 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱stroke 215 mm︱tiltable up to +/- 10 mm︱table height 1050 mm︱dayligth 385 mm︱oil volume 80 ltr.︱travel -x axis 500 X-Weg mm︱traversing speed 300 R-Weg mm︱compressed air 6,0 bar︱total power requirement 8,0 KVA︱weight of the machine ca. 4750 kg.︱range L-W-H 2000 x 2000 x 2380 mm︱
          ** Machine with full equipment (all axes controlled)! Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - Rear safety device (sliding door) - Safety device on the side (pivoting door) - Operation manual * Special accessories included: - TRUMPF tool cabinet including various TRUMPF bending tools * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308349 * Machinevideo : https://www.youtube.com/watch?v=segdogmeOFc
            pressure 50,0 t
            chamfer lenght 1275 mm
            distance between columns 1040 mm
            column arm 410 mm
            table width 100 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            stroke 215 mm
            tiltable up to +/- 10 mm
            table height 1050 mm
            dayligth 385 mm
            oil volume 80 ltr.
            travel -x axis 500 X-Weg mm
            traversing speed 300 R-Weg mm
            compressed air 6,0 bar
            total power requirement 8,0 KVA
            weight of the machine ca. 4750 kg.
            range L-W-H 2000 x 2000 x 2380 mm
            Description :
            ** Machine with full equipment (all axes controlled)!

            Furnishing:
            - DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - TRUMPF hydraulic upper tool clamping
            - TRUMPF hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - Rear safety device (sliding door)
            - Safety device on the side (pivoting door)
            - Operation manual

            * Special accessories included:
            - TRUMPF tool cabinet including various TRUMPF bending tools

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308349

            * Machinevideo :
            https://www.youtube.com/watch?v=segdogmeOFc


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPE 36.230


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9301533 · Hydr. pressbrake

          ATLANTIC - HPE 36.230 - - 1998 / 2014 -

          Technical details
          pressure 230 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱column arm 300 mm︱table width 200 mm︱dayligth 450 mm︱stroke 200 mm︱back stop - adjustable 500 mm︱working feed 7,0 mm/sec︱return speed 80,0 mm/sec︱work height max. 965 mm︱oil volume 275 l︱Pressure power 265 bar︱total power requirement 18,7 kW︱weight of the machine ca. 13300 kg.︱range L-W-H 4100 x 2200 x 2670 mm︱
          Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) * Pivoting control panel in front left - CNC electric backgauge (X axis) * with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning * Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control
            pressure 230 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            column arm 300 mm
            table width 200 mm
            dayligth 450 mm
            stroke 200 mm
            back stop - adjustable 500 mm
            working feed 7,0 mm/sec
            return speed 80,0 mm/sec
            work height max. 965 mm
            oil volume 275 l
            Pressure power 265 bar
            total power requirement 18,7 kW
            weight of the machine ca. 13300 kg.
            range L-W-H 4100 x 2200 x 2670 mm
            Description :
            Furnishing:
            - DELEM CNC control, model DA 56 (conversion in 2014)
            * Pivoting control panel in front left
            - CNC electric backgauge (X axis)
            * with 3x stop fingers, manually adjustable from the side
            - CNC pneumatic height adjustment of the stop fingers (R axis)
            - manual table crowning
            * Adjustment by hand crank, with analogue display
            - 1x reversible MULTI V - universal die block
            - 1x complete set of upper tools
            - other / various application tools
            - free-moving 2hand/foot control


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake ATLANTIC HPT 40.180


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308248 · Hydr. pressbrake

          ATLANTIC - HPT 40.180 - - 1998 - NC ATL 550

          Technical details
          pressure 180 t︱chamfer lenght 4100 mm︱distance between columns 3150 mm︱stroke - stepless adjustable 200 mm︱column arm 300 mm︱table height 1090 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱Control NC ATL 550 ︱hydraulic 235 bar︱voltage 380 V︱total power requirement 15,0 kW︱weight 14200 kg︱range L-W-H 4400 x 1900 x 3000 mm︱
          Furnishing: - NC controlled hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric back gauge * with 2 stop fingers, manually adjustable * on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-moving 2-hand / double-foot operation
            pressure 180 t
            chamfer lenght 4100 mm
            distance between columns 3150 mm
            stroke - stepless adjustable 200 mm
            column arm 300 mm
            table height 1090 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            Control NC ATL 550
            hydraulic 235 bar
            voltage 380 V
            total power requirement 15,0 kW
            weight 14200 kg
            range L-W-H 4400 x 1900 x 3000 mm
            Description :
            Furnishing:
            - NC controlled hydraulic press brake
            * with torsion shaft
            - ATLANTIC NC control ATL 550
            * Positioning of backgauge ( X )
            * Depth setting positioning ( Y1+Y2 )
            * Possibility of programming different programs
            * Storage capacity max. 200 programs - max. 400 sentences
            * Pivoting control panel, front left
            - electric back gauge
            * with 2 stop fingers, manually adjustable
            * on ball screws
            - manual table crowning, with analogue display
            - divided deer foot upper tool 85°
            - divided MultiV - universal matrix block
            - rear protection
            - free-moving 2-hand / double-foot operation


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake GASPARINI PBS CB 165/3000


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308355 · Hydr. pressbrake

          GASPARINI - PBS CB 165/3000 - - 1998 -

          Technical details
          pressure 165 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 450 mm︱stroke 250 mm︱dayligth 440 mm︱ajustment speed 100 mm/sec︱working feed 1-10 mm/sec︱return speed 120 mm/sec︱table height 950 mm︱oil volume 250 l︱operating pressure 265 bar︱voltage 380 V︱total power requirement 18.5 KW︱weight of the machine ca. 12600 kg︱range L-W-H 3670 x 1830 x 3130 mm︱
          ** Machine in good / well-maintained condition (!!) Furnishing: - DELEM CNC control - model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPARINI hydraulic lower tool clamping - many insert/bending tools (punches + matrices) - 1x freely movable 2 hand / foot control - 2x front stable support arms - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - original operating instructions + spare parts list (DE) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308355
            pressure 165 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 450 mm
            stroke 250 mm
            dayligth 440 mm
            ajustment speed 100 mm/sec
            working feed 1-10 mm/sec
            return speed 120 mm/sec
            table height 950 mm
            oil volume 250 l
            operating pressure 265 bar
            voltage 380 V
            total power requirement 18.5 KW
            weight of the machine ca. 12600 kg
            range L-W-H 3670 x 1830 x 3130 mm
            Description :
            ** Machine in good / well-maintained condition (!!)

            Furnishing:
            - DELEM CNC control - model DA 65
            * Swivel control panel, front right
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled pneumatic table crowning (V axis)
            - GASPARINI hydraulic upper tool clamping
            - GASPARINI hydraulic lower tool clamping
            - many insert/bending tools (punches + matrices)
            - 1x freely movable 2 hand / foot control
            - 2x front stable support arms
            - Rear safety device (lockable door)
            - Safety device on the side (pivoting doors)
            - original operating instructions + spare parts list (DE)

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308355


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TrumaBend V50


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308372 · Hydr. pressbrake

          TRUMPF - TrumaBend V50 - - 1998 - DELEM

          Technical details
          pressure 50.0 t︱chamfer lenght 1275 mm︱distance between columns 1040 mm︱column arm 410 mm︱table width 100 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱stroke 215 mm︱tiltable up to +/- 10 mm︱table height 1050 mm︱dayligth 385 mm︱oil volume 80.0 L︱travel -x axis 500 X-Weg mm︱traversing speed 300 R-Weg mm︱compressed air 6.0 bar︱Number of working hours 24.000 h︱control DELEM ︱total power requirement 8.0 KVA︱weight of the machine ca. 4750 kg.︱
          ** Machine with only approx. 24.000 operating hours (!!) ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - TRUMPF hydraulic upper tool clamping - TRUMPF hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front, movable material support arms - 1x rear safety device (pivoting door) - 1x safety device on the side - left (pivoting door) - 1x safety device on the side - right (loose door) - TRUMPF original operating instructions * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372
            pressure 50.0 t
            chamfer lenght 1275 mm
            distance between columns 1040 mm
            column arm 410 mm
            table width 100 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            stroke 215 mm
            tiltable up to +/- 10 mm
            table height 1050 mm
            dayligth 385 mm
            oil volume 80.0 L
            travel -x axis 500 X-Weg mm
            traversing speed 300 R-Weg mm
            compressed air 6.0 bar
            Number of working hours 24.000 h
            control DELEM
            total power requirement 8.0 KVA
            weight of the machine ca. 4750 kg.
            Description :
            ** Machine with only approx. 24.000 operating hours (!!)
            ** all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis

            Furnishing:
            - DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - TRUMPF hydraulic upper tool clamping
            - TRUMPF hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - 2x front, movable material support arms
            - 1x rear safety device (pivoting door)
            - 1x safety device on the side - left (pivoting door)
            - 1x safety device on the side - right (loose door)
            - TRUMPF original operating instructions

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308372


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake KNUTH / DURMA HAP 35200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308265 · Hydr. pressbrake

          KNUTH / DURMA - HAP 35200 - - 1997 - ELGO

          Technical details
          pressure 200 t︱chamfer lenght 3550 mm︱distance between columns 3050 mm︱column arm 200 mm︱ajustment speed 100 mm/sec︱working feed 8,0 mm/sec︱return speed 120 mm/sec︱stroke 190 mm︱table height 900 mm︱dayligth 350 mm︱engine output 15,0 kW︱oil volume 150 ltr.︱Control ELGO ︱weight of the machine ca. 13500 kg.︱range L-W-H 4800 x 1750 x 2800 mm︱
          Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display * digital position display for backgauge (X axis) * digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes * Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/foot control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265
            pressure 200 t
            chamfer lenght 3550 mm
            distance between columns 3050 mm
            column arm 200 mm
            ajustment speed 100 mm/sec
            working feed 8,0 mm/sec
            return speed 120 mm/sec
            stroke 190 mm
            table height 900 mm
            dayligth 350 mm
            engine output 15,0 kW
            oil volume 150 ltr.
            Control ELGO
            weight of the machine ca. 13500 kg.
            range L-W-H 4800 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / electro-hydraulic NC press brake
            - with digital ELGO display
            * digital position display for backgauge (X axis)
            * digital position display for depth adjustment (Y1+Y2 axis)
            - swiveling operation, front left
            - electro-motorized back gauge - X axis
            - electro-motorized adjustment of the immersion depth - Y axes
            * Machine with torsion shaft
            - front support arms
            - continuous adjustment of the pressure force (upper beam)
            - 1x universal matrix block, reversible
            - 1x set of split deer foot upper tool
            - 1x freely movable 2 hand/foot control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308265


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER PR6 1500 KN x 3100 MM


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308368 · Hydr. pressbrake

          BEYELER - PR6 1500 KN x 3100 MM - - 1997 -

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2550 mm︱column arm 405 mm︱table width 150 mm︱ajustment speed 200 mm/sec︱working feed 10.0 mm/sec︱return speed 120 mm/sec︱stroke 215 mm︱dayligth 465 mm︱table height 960 mm︱operating pressure 320 bar︱oil volume 200 l︱voltage 3x 400 V︱total power requirement 15.0 KW︱weight of the machine ca. 9500 kg︱range L-W-H 3958 x 2350 x 2750 mm︱
          ** maintained condition (!!) Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP * numerical CNC control unit * 2D graphical programming & product display * Color screen * Tool & program library * clear and logically structured screen pages * Collision display * Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled underbeam cambering (BEYELER system) - manual upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protection device (protective doors) - various folding/bending tools - 1x freely movable 2 hand/foot control - Operating instructions (PDF) + circuit diagram * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2550 mm
            column arm 405 mm
            table width 150 mm
            ajustment speed 200 mm/sec
            working feed 10.0 mm/sec
            return speed 120 mm/sec
            stroke 215 mm
            dayligth 465 mm
            table height 960 mm
            operating pressure 320 bar
            oil volume 200 l
            voltage 3x 400 V
            total power requirement 15.0 KW
            weight of the machine ca. 9500 kg
            range L-W-H 3958 x 2350 x 2750 mm
            Description :
            ** maintained condition (!!)

            Furnishing:
            - BEYELER electro-hydraulic CNC press brake
            - CNC control CYBELEC model DNC 800 HP
            * numerical CNC control unit
            * 2D graphical programming & product display
            * Color screen
            * Tool & program library
            * clear and logically structured screen pages
            * Collision display
            * Swivel operation, front right
            - CNC controlled axes (Y1+Y2-X-R-Z1+Z2)
            - CNC-controlled back gauge adjustment (X-axis)
            - CNC-controlled vertical adjustment of the stop beam (R-axis)
            - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2)
            - CNC-controlled underbeam cambering (BEYELER system)
            - manual upper tool clamping
            - manual lower tool clamping
            - BEYELER hydraulic clamping/folding device (lower tool)
            - rear protective device (protective grille)
            - side protection device (protective doors)
            - various folding/bending tools
            - 1x freely movable 2 hand/foot control
            - Operating instructions (PDF) + circuit diagram

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308368


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake DARLEY EHP 50-20/15


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308216 · Hydr. pressbrake

          DARLEY - EHP 50-20/15 - - 1996 -

          Technical details
          pressure 50,0 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 320 mm︱stroke 120 mm︱ajustment speed 100 mm/sec︱working feed 10,0 mm/sec︱return speed 75,0 mm/sec︱column arm 250 mm︱work height max. 900 mm︱table width 100 mm︱connected load 7,2 kW︱oil volume 90 ltr.︱weight 2600 kg︱range L-W-H 2250 x 1100 x 2050 mm︱
          Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers * lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch
            pressure 50,0 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 320 mm
            stroke 120 mm
            ajustment speed 100 mm/sec
            working feed 10,0 mm/sec
            return speed 75,0 mm/sec
            column arm 250 mm
            work height max. 900 mm
            table width 100 mm
            connected load 7,2 kW
            oil volume 90 ltr.
            weight 2600 kg
            range L-W-H 2250 x 1100 x 2050 mm
            Description :
            Furnishing:
            - DELEM CNC control model DA 24e
            - swiveling control panel
            - electrical backgauge (X axis)
            - 2x manually adjustable stop fingers
            * lateral + vertical adjustment (R + Z axis)
            - 2x front support arms
            - SICK light barrier in front
            - 2 hand / foot switch


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 36.200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308361 · Hydr. pressbrake

          HACO - PPM 36.200 - - 1996 - konv.

          Technical details
          pressure 200 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱stroke of upper beam 200 mm︱throat 300 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱ 265 bar︱Control konv. ︱work height max. 965 mm︱total power requirement 15,0 kW︱weight 12700 kg︱range L-W-H 3860 x 1750 x 2800 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361
            pressure 200 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            stroke of upper beam 200 mm
            throat 300 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            265 bar
            Control konv.
            work height max. 965 mm
            total power requirement 15,0 kW
            weight 12700 kg
            range L-W-H 3860 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * Torsion shaft for parallelism
            - electric back stop (X axis)
            * with handwheel for fine adjustment
            * on ball screws
            * 2x manually adjustable stop fingers
            - manual (jog mode) and automatic cycle selector switch
            - split deer foot upper tools
            - 2x universal V-die block, reversible
            - freely movable 2-hand/foot control
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake TRUMPF TRUMABEND V 130 X


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308380 · Hydr. pressbrake

          TRUMPF - TRUMABEND V 130 X - - 1995 -

          Technical details
          pressure 130 t︱chamfer lenght 3060 mm︱distance between columns 2690 mm︱column arm 410 mm︱stroke 365 mm︱dayligth 535 mm︱ajustment speed 200 mm/sec︱working feed 1-10 mm/sec︱return speed 135 mm/sec︱table width 120 mm︱table height 1050 mm︱tiltable up to +/- 10 mm︱Number of working hours 26.937 h︱compressed air 5.0 - 7.0 bar︱oil volume 250 l︱operating pressure 340 bar︱voltage 400 V︱total power requirement 16.0 KVA︱weight of the machine ca. 12950 kg︱range L-W-H 3640 x 2210 x 2885 mm︱
          ** maintained condition (!!) - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 * Swivel control panel, front left * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled, pneumatic matrix displacement (I axis) - CNC WILA electro-motor table crowning - TRUMPF electro-hydraulic upper tool clamping - TRUMPF electro-hydraulic lower tool clamping - 1x freely movable 2 hand / foot control - 2x front support arms - incl. "Sliding System" - Rear safety device (sliding door) - Safety device on the side (pivoting door) - original instruction manual * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380 * Machinevideo : https://www.youtube.com/watch?v=bgqj2HCDid4
            pressure 130 t
            chamfer lenght 3060 mm
            distance between columns 2690 mm
            column arm 410 mm
            stroke 365 mm
            dayligth 535 mm
            ajustment speed 200 mm/sec
            working feed 1-10 mm/sec
            return speed 135 mm/sec
            table width 120 mm
            table height 1050 mm
            tiltable up to +/- 10 mm
            Number of working hours 26.937 h
            compressed air 5.0 - 7.0 bar
            oil volume 250 l
            operating pressure 340 bar
            voltage 400 V
            total power requirement 16.0 KVA
            weight of the machine ca. 12950 kg
            range L-W-H 3640 x 2210 x 2885 mm
            Description :
            ** maintained condition (!!)

            - - - - - - - - - - - - - -
            HIGH-SPEED electro-hydraulic press brake with:
            increased installation height
            increased cylinder stroke
            - - - - - - - - - - - - - -

            Furnishing:
            - CNC electro-hydraulic die bending press
            - including DELEM CNC control model DA 65
            * Swivel control panel, front left
            * 2D graphical programming & product display
            * Tool & program library
            - CNC controlled axes:
            * Y1 + Y2 / X / R / Z1 + Z2 / I axis
            - CNC controlled back gauge (X axis)
            - CNC controlled height adjustment from the back gauge (R axis)
            - CNC controlled adjustment of the stop fingers (Z axis)
            - CNC controlled, pneumatic matrix displacement (I axis)
            - CNC WILA electro-motor table crowning
            - TRUMPF electro-hydraulic upper tool clamping
            - TRUMPF electro-hydraulic lower tool clamping
            - 1x freely movable 2 hand / foot control
            - 2x front support arms - incl. "Sliding System"
            - Rear safety device (sliding door)
            - Safety device on the side (pivoting door)
            - original instruction manual

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308380

            * Machinevideo :
            https://www.youtube.com/watch?v=bgqj2HCDid4


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 100-3100


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308337 · Hydr. pressbrake

          BEYELER - RH 100-3100 - - 1991 -

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱column arm 255 mm︱stroke 215 mm︱dayligth 410 mm︱table height 890 mm︱ajustment speed 100 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 160 ltr.︱total power requirement 5,5 kW︱weight 7200 kg︱range L-W-H 3750 x 1450 x 2500 mm︱
          Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337
            pressure 100 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            column arm 255 mm
            stroke 215 mm
            dayligth 410 mm
            table height 890 mm
            ajustment speed 100 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 160 ltr.
            total power requirement 5,5 kW
            weight 7200 kg
            range L-W-H 3750 x 1450 x 2500 mm
            Description :
            Furnishing:
            - electro-hydraulic press brake
            - CNC CYBELEC EURO III control unit
            - Control panel, right front
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308337


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPES 40.135


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9301136 · Hydr. pressbrake

          HACO - PPES 40.135 - - 1991 - M 9101

          Technical details
          pressure 135 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱stroke 130 mm︱dayligth 325 mm︱throat 250 mm︱working feed 10,0 mm/sec︱return speed 100 mm/sec︱table width 180 mm︱work height max. 865 mm︱Control M 9101 ︱oil volume 225 Liter︱engine output 11,0 kW︱weight 11.500 kg︱Dimensions (LxWxH) 4270 x 1500 x 2530 mm︱
          Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German * Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be
            pressure 135 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            stroke 130 mm
            dayligth 325 mm
            throat 250 mm
            working feed 10,0 mm/sec
            return speed 100 mm/sec
            table width 180 mm
            work height max. 865 mm
            Control M 9101
            oil volume 225 Liter
            engine output 11,0 kW
            weight 11.500 kg
            Dimensions (LxWxH) 4270 x 1500 x 2530 mm
            Description :
            Furnishing:
            - HACO / Robosoft NC control, model M 9101 controller
            - with external display / screen
            - pivoting control, front left
            - electric back gauge (X axis)
            - with 2x stop fingers, manually adjustable
            * manual windage (Z axis)
            * manual height adjustment (R axis)
            - hydraulic upper tool clamping
            - manual table crowning, adjustment with hand crank
            - segmented upper and lower tools
            - free-moving 2-hand control
            - free-moving footswitch
            - rear protective device (self-made)
            - User manual in German

            * Machinevideo :
            https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake BEYELER RH 60x2050


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308363 · Hydr. pressbrake

          BEYELER - RH 60x2050 - - 1990 -

          Technical details
          pressure 60.0 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱column arm 255 mm︱stroke 165 mm︱dayligth 360 mm︱table height 890 mm︱ajustment speed 85.0 mm/sec︱working feed 6,5 mm/sec︱back stop - adjustable max. 500 mm︱oil volume 100 ltr.︱total power requirement 4,0 kW︱weight 4600 kg︱range L-W-H 2700 x 1450 x 2400 mm︱
          ** Machine from a workshop for the disabled ** maintained condition (!!) Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * high resolution screen * Clear, concise menus in the operator's language * Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning * very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363
            pressure 60.0 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            column arm 255 mm
            stroke 165 mm
            dayligth 360 mm
            table height 890 mm
            ajustment speed 85.0 mm/sec
            working feed 6,5 mm/sec
            back stop - adjustable max. 500 mm
            oil volume 100 ltr.
            total power requirement 4,0 kW
            weight 4600 kg
            range L-W-H 2700 x 1450 x 2400 mm
            Description :
            ** Machine from a workshop for the disabled
            ** maintained condition (!!)

            Furnishing:
            - CNC electro-hydraulic press brake
            - CNC CYBELEC EURO IV control unit
            * high resolution screen
            * Clear, concise menus in the operator's language
            * Tools and products library
            - Control panel, right front
            - CNC controlled axes: Y1 + Y2 + X axis
            - CNC electric back gauge (X axis)
            - 2x manually adjustable stop fingers
            - AMADA-SYSTEM A upper tool adapter including upper wedge crowning
            * very many bending/insertion tools (stamps + matrices)
            - 2x front material/sheet metal support arms
            - freely movable 2-hand/foot control
            - side protection device (protective grille)
            - rear protective device (protective grille)
            - Operating instructions machine + control

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308363


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.