,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Hydr. pressbrake

          Machinelist: Hydr. pressbrake


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE EQPB-2 BabyPress 6,2t x 285 mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2300004 · Hydr. pressbrake

          PLACKE - EQPB-2 BabyPress 6,2t x 285 mm - - NEU - DELEM DA 41T

          Technical details
          pressure 6,2 t︱chamfer lenght 285 mm mm︱distance between columns 230 mm︱dayligth 215 mm︱throat 70 mm︱stroke 100 mm︱working feed 9,8 mm/sec︱return speed 50 mm/sec︱quantity of oil 10 l︱Control DELEM DA 41T ︱total power requirement 0,7 kW︱weight of the machine ca. 250 kg︱dimensions 900 x 1300 x 550 mm︱
          • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T
            pressure 6,2 t
            chamfer lenght 285 mm mm
            distance between columns 230 mm
            dayligth 215 mm
            throat 70 mm
            stroke 100 mm
            working feed 9,8 mm/sec
            return speed 50 mm/sec
            quantity of oil 10 l
            Control DELEM DA 41T
            total power requirement 0,7 kW
            weight of the machine ca. 250 kg
            dimensions 900 x 1300 x 550 mm
            Description :
            • Basic version as a C-frame
            • Compact table model
            • Ideal for prototypes and small series
            • Very short setup time
            • Functionally simple
            • Wide range of applications
            • Low noise level
            • Low energy consumption
            • Easy handling

            including special equipment:
            - CNC control DELEM DA 41T


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE HQPB M4 3100/125t


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96933 · Hydr. pressbrake

          PLACKE - HQPB M4 3100/125t - - 2017 -

          Technical details
          pressure 125 t︱chamfer lenght 3100 mm︱distance between columns mm︱working flow 220 mm/s︱dayligth 450 mm︱ram stroke 265 mm︱power requirement 15 kW︱total power requirement kW︱weight of the machine ca. 10,50 t︱dimensions of the machine ca. 4,30 x 2,25 x 2,90 m︱
          • Gescheuerte Achsen: Y1, Y2, X, R • CNC-Steuerung Delem DA-60T Touch • Hydraulische WILA/Trumpf Werkzeugaufnahme Modufix oben • Manuelle WILA/Trumpf Werkzeugaufnahme Modufix unten • 2 Anschlagfinger manuell verschiebbar + klemmbar • 2 Auflegearme, seitlich verschiebbar auf Linienführung, inkl. Schnellklemmung • TFS Sicherheits-Laserlichtschranke vorne • CNC gesteuerte WILA Bombierung • Betriebsanleitung
            pressure 125 t
            chamfer lenght 3100 mm
            working flow 220 mm/s
            dayligth 450 mm
            ram stroke 265 mm
            power requirement 15 kW
            weight of the machine ca. 10,50 t
            dimensions of the machine ca. 4,30 x 2,25 x 2,90 m
            Description :
            • Gescheuerte Achsen: Y1, Y2, X, R
            • CNC-Steuerung Delem DA-60T Touch
            • Hydraulische WILA/Trumpf Werkzeugaufnahme Modufix oben
            • Manuelle WILA/Trumpf Werkzeugaufnahme Modufix unten
            • 2 Anschlagfinger manuell verschiebbar + klemmbar
            • 2 Auflegearme, seitlich verschiebbar auf Linienführung, inkl. Schnellklemmung
            • TFS Sicherheits-Laserlichtschranke vorne
            • CNC gesteuerte WILA Bombierung
            • Betriebsanleitung


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE HQPB-6H 210t / 3100 mm


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3300052 · Hydr. pressbrake

          PLACKE - HQPB-6H 210t / 3100 mm - - 2001 - DELEM DA 69

          Technical details
          pressure 210 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱dayligth 490 mm︱throat 350 mm︱stroke 215 mm︱working feed 9,8 mm/sec︱return speed 80 mm/sec︱ajustment speed 130 mm/sec︱work height max. 845 mm︱Control DELEM DA 69 ︱total power requirement 15 kW︱weight of the machine ca. 15 kg︱dimensions of the machine ca. 3880 x 1675 x 3880 mm︱
          - DELEM CNC control DA69 - controlled axes: Y1 + Y2 + X + R + Z1 + Z2 - hydr. bombing device - Electric back stop, travel range 600 mm - hydr. Upper tool holder standard R - hydr. Lower tool holder standard R - front laser protection device FIESSLER - 2x CNC electrically movable stop fingers, foldable - side + rear protection device - 1x set of upper tools - Hand and foot controls - Operation manual
            pressure 210 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            dayligth 490 mm
            throat 350 mm
            stroke 215 mm
            working feed 9,8 mm/sec
            return speed 80 mm/sec
            ajustment speed 130 mm/sec
            work height max. 845 mm
            Control DELEM DA 69
            total power requirement 15 kW
            weight of the machine ca. 15 kg
            dimensions of the machine ca. 3880 x 1675 x 3880 mm
            Description :
            - DELEM CNC control DA69
            - controlled axes: Y1 + Y2 + X + R + Z1 + Z2
            - hydr. bombing device
            - Electric back stop, travel range 600 mm
            - hydr. Upper tool holder standard R
            - hydr. Lower tool holder standard R
            - front laser protection device FIESSLER
            - 2x CNC electrically movable stop fingers, foldable
            - side + rear protection device
            - 1x set of upper tools
            - Hand and foot controls
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE QPB-4 100/2550, Delem DA 66-T


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12317 · Hydr. pressbrake

          PLACKE - QPB-4 100/2550, Delem DA 66-T - - 2000 - Delem DA-66T

          Technical details
          pressure 100 t︱chamfer lenght 2550 mm︱distance between columns 2050 mm︱Control Delem DA-66T ︱throat 255 mm︱ram stroke 215 mm︱dayligth 530 mm︱rapid traverse - down 150 mm/sec︱press speed 1 - 9,8 mm/sec︱return speed 80 mm/sec︱power capacity 7,5 kW︱tank contens 228 l︱sound - pressure - turn off level ca. max. >70 dB︱connected load 12 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 2,9 x 1,6 x 2,8 m︱Electric 400 Volt ︱Foot switch ︱Light barrier in front ︱Matrize im Stück
          Hydraulic press brake with updated CNC control Delem DA-66T, controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning. Continuous, cranked upper tool and die single V as you see in the video. X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm. R-axis stop vertical 200 mm, 150 mm/sec, accuracy +/-0.05 mm. Z-axis stop button transverse, manual 1620 mm. Machine is being sold due to production change. The last test took place in 02/ 23 and was free of defects. Machine dealer with own stock of 1600 m²
            pressure 100 t
            chamfer lenght 2550 mm
            distance between columns 2050 mm
            Control Delem DA-66T
            throat 255 mm
            ram stroke 215 mm
            dayligth 530 mm
            rapid traverse - down 150 mm/sec
            press speed 1 - 9,8 mm/sec
            return speed 80 mm/sec
            power capacity 7,5 kW
            tank contens 228 l
            sound - pressure - turn off leve. >70 dB
            connected load 12 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 2,9 x 1,6 x 2,8 m
            Matrize im Stück
            Description :
            Hydraulic press brake with updated CNC control Delem DA-66T,
            controlled backgauge in the axes X and R as well as Z manually with 4 stop
            fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning. Continuous,
            cranked upper tool and die single V as you see in the video.
            X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm.
            R-axis stop vertical 200 mm, 150 mm/sec, accuracy +/-0.05 mm.
            Z-axis stop button transverse, manual 1620 mm.
            Machine is being sold due to production change. The last test took place in 02/
            23 and was free of defects.
            Machine dealer with own stock of 1600 m²


        • Plum & Partner Werkzeugmaschinen GmbH
        • Winkelstraße 32
        • 32257 Bünde
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake PLACKE OPB 3 60/2050


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-3300054 · Hydr. pressbrake

          PLACKE - OPB 3 60/2050 - - 2000 - DELEM DA 65

          Technical details
          pressure 60 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱dayligth 475 mm︱throat 255 mm︱stroke 165 mm︱working feed 9,8 mm/sec︱return speed 117 mm/sec︱ajustment speed 150 mm/sec︱Control DELEM DA 65 ︱total power requirement 5,5 kW︱weight of the machine ca. 5000 kg︱dimensions of the machine ca. 2300 x 1550 x 2470 mm︱
          - DELEM CNC control DA65 - Electric back gauge (X-axis), 600 mm - hydr. Upper tool clamping - Front light barrier - side + rear protective grilles - manually adjustable stop bar, foldable (R+Z axis) - 2x support arm - Machine feet - Operation manual
            pressure 60 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            dayligth 475 mm
            throat 255 mm
            stroke 165 mm
            working feed 9,8 mm/sec
            return speed 117 mm/sec
            ajustment speed 150 mm/sec
            Control DELEM DA 65
            total power requirement 5,5 kW
            weight of the machine ca. 5000 kg
            dimensions of the machine ca. 2300 x 1550 x 2470 mm
            Description :
            - DELEM CNC control DA65
            - Electric back gauge (X-axis), 600 mm
            - hydr. Upper tool clamping
            - Front light barrier
            - side + rear protective grilles
            - manually adjustable stop bar, foldable (R+Z axis)
            - 2x support arm
            - Machine feet
            - Operation manual


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Buy used hydraulic press brakes from LagerMaschinen
          Hydraulic press brakes from LagerMaschinen are a great idea

          When purchasing machines for your newly opened or expanding company the prices of brand new machines can be daunting or downright limiting. With LagerMaschinen the customer is able to research find and purchase the hydraulic press breaks that fit their needs as well as being reasonably priced. LagerMaschinen's online platform is designed to give customers and sellers alike what they need: an appropriate space for communication regarding hydraulic press brakes to be bought and sold technical specifications and measurements and delivery and installation services. LagerMaschinen's goal is to provide everyone with what they need to best meet their professional and financial goals. By working with LagerMaschinen your search for the right hydraulic press brakes is faster more informed and more affordable.

          Used hydraulic press brakes from LagerMaschinen

          Hydraulic press brakes are used to bend metal - most often sheet metal - to the appropriate size and shape needed. These machines are used in a wide variety of industries serving as either part of a series of production steps or as the primary machine needed. Certain hydraulic press brakes are additionally fitted with different dies such as v-dies (producing a 'v' shape) offset dies (forming a 'z' shape) or curling dies (curling the end of the sheet metal. Hydraulic press brakes are more high-powered safer (as they can be stopped more easily in the event of an emergency) and produce more uniform results. With LagerMaschinen's wide inventory of hydraulic press brakes and other machines you'll surely find the product that's right for your production needs.