,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO ERMS 200.75


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96922 · Hydr. pressbrake

          HACO - ERMS 200.75 - - 2011 - ATS 585

          Technical details
          pressure 075 t︱chamfer lenght 2100 mm︱distance between columns 1600 mm︱stroke of upper beam 100 mm︱throat 200 mm︱working feed 10.0 mm/sec︱return speed 70.0 mm/sec︱work height max. 840 mm︱table width 60.0 mm︱dayligth 280 mm︱Control ATS 585 ︱total power requirement 7.5 kW︱weight 4400 kg︱range L-W-H 2600 x 1200 x 1800 mm︱
          Furnishing: - NC controlled electro-hydraulic press brake - with HACO NC control ATS 585 * Positioning of the back gauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Possibility of programming various programs * Swivel control panel, left front - electro-mechanical back gauge (X axis) * with 2x stop fingers, manually adjustable (R+Z axis) - Tool holder system A - with top wedge crowning - shared insert/bending tools - 1x side, pivoting protective door (left) - rear protection device (sliding doors) - 1x freely movable double foot switch with emergency stop button - User manual (PDF) * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308369
            pressure 075 t
            chamfer lenght 2100 mm
            distance between columns 1600 mm
            stroke of upper beam 100 mm
            throat 200 mm
            working feed 10.0 mm/sec
            return speed 70.0 mm/sec
            work height max. 840 mm
            table width 60.0 mm
            dayligth 280 mm
            Control ATS 585
            total power requirement 7.5 kW
            weight 4400 kg
            range L-W-H 2600 x 1200 x 1800 mm
            Description :
            Furnishing:
            - NC controlled electro-hydraulic press brake
            - with HACO NC control ATS 585
            * Positioning of the back gauge (X axis)
            * Positioning of the depth adjustment (Y1+Y2 axis)
            * Possibility of programming various programs
            * Swivel control panel, left front
            - electro-mechanical back gauge (X axis)
            * with 2x stop fingers, manually adjustable (R+Z axis)
            - Tool holder system A - with top wedge crowning
            - shared insert/bending tools
            - 1x side, pivoting protective door (left)
            - rear protection device (sliding doors)
            - 1x freely movable double foot switch with emergency stop button
            - User manual (PDF)

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308369


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 30.150


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308386 · Hydr. pressbrake

          HACO - PPM 30.150 - - 2008 - ATL 550

          Technical details
          pressure 150 t︱chamfer lenght 3100 mm︱distance between columns 2600 mm︱stroke of upper beam 120 mm︱throat 250 mm︱dayligth 325 mm︱working feed 7.0 mm/sec︱return speed 60.0 mm/sec︱ 300 bar︱Control ATL 550 ︱work height max. 915 mm︱table width 180 mm︱total power requirement 7.5 kW︱weight 8250 kg︱range L-W-H 3500 x 1700 x 2380 mm︱
          Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 * Positioning of the back gauge (X) * Positioning of the depth adjustment (Y1+Y2) * Possibility of programming various programs * Storage capacity max. 200 programs - max. 400 sets * Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) * 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - "HACO" holder - 1x rotating MULTI V die block (lower tool) - side protection device (pivoting doors) - 1x freely movable foot control - 2x front, stable material support arms - User manual (PDF) * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386
            pressure 150 t
            chamfer lenght 3100 mm
            distance between columns 2600 mm
            stroke of upper beam 120 mm
            throat 250 mm
            dayligth 325 mm
            working feed 7.0 mm/sec
            return speed 60.0 mm/sec
            300 bar
            Control ATL 550
            work height max. 915 mm
            table width 180 mm
            total power requirement 7.5 kW
            weight 8250 kg
            range L-W-H 3500 x 1700 x 2380 mm
            Description :
            Furnishing:
            - simple NC controlled hydraulic press brake, including torsion shaft
            - including ATLANTIC NC control ATL 550
            * Positioning of the back gauge (X)
            * Positioning of the depth adjustment (Y1+Y2)
            * Possibility of programming various programs
            * Storage capacity max. 200 programs - max. 400 sets
            * Swivel control panel, front left
            - electro-motorized, stepless depth adjustment (Y1+Y2 axis)
            - electro-motorized back gauge (X axis)
            * 2x manually adjustable stop fingers
            - manual table crowning, including analogue value display
            - 1x split upper tool set - "HACO" holder
            - 1x rotating MULTI V die block (lower tool)
            - side protection device (pivoting doors)
            - 1x freely movable foot control
            - 2x front, stable material support arms
            - User manual (PDF)

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308386


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO ERM 36225


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03794 · Hydr. pressbrake

          HACO - ERM 36225 - - 2005 - CNC

          Technical details
          pressure 225 t︱chamfer lenght 3600 mm︱distance between columns 3100 mm︱Control CNC ︱type M9101 Controller︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. m︱
            pressure 225 t
            chamfer lenght 3600 mm
            distance between columns 3100 mm
            Control CNC
            type M9101 Controller
            weight of the machine ca. 13 t


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 36.200


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308361 · Hydr. pressbrake

          HACO - PPM 36.200 - - 1996 - konv.

          Technical details
          pressure 200 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱stroke of upper beam 200 mm︱throat 300 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱ 265 bar︱Control konv. ︱work height max. 965 mm︱total power requirement 15,0 kW︱weight 12700 kg︱range L-W-H 3860 x 1750 x 2800 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual * Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361
            pressure 200 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            stroke of upper beam 200 mm
            throat 300 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            265 bar
            Control konv.
            work height max. 965 mm
            total power requirement 15,0 kW
            weight 12700 kg
            range L-W-H 3860 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * Torsion shaft for parallelism
            - electric back stop (X axis)
            * with handwheel for fine adjustment
            * on ball screws
            * 2x manually adjustable stop fingers
            - manual (jog mode) and automatic cycle selector switch
            - split deer foot upper tools
            - 2x universal V-die block, reversible
            - freely movable 2-hand/foot control
            - Operation manual

            * Machine link:
            http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308361


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPM 36.200


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96907 · Hydr. pressbrake

          HACO - PPM 36.200 - - 1996 - konv.

          Technical details
          pressure 200 t︱chamfer lenght 3600 mm︱distance between columns 3150 mm︱stroke of upper beam 200 mm︱throat 300 mm︱dayligth 450 mm︱working feed 9,0 mm/sec︱return speed 80,0 mm/sec︱ 265 bar︱Control konv. ︱work height max. 965 mm︱total power requirement 15,0 kW︱weight 12700 kg︱range L-W-H 3860 x 1750 x 2800 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * Torsion shaft for parallelism - electric back stop (X axis) * with handwheel for fine adjustment * on ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual
            pressure 200 t
            chamfer lenght 3600 mm
            distance between columns 3150 mm
            stroke of upper beam 200 mm
            throat 300 mm
            dayligth 450 mm
            working feed 9,0 mm/sec
            return speed 80,0 mm/sec
            265 bar
            Control konv.
            work height max. 965 mm
            total power requirement 15,0 kW
            weight 12700 kg
            range L-W-H 3860 x 1750 x 2800 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * Torsion shaft for parallelism
            - electric back stop (X axis)
            * with handwheel for fine adjustment
            * on ball screws
            * 2x manually adjustable stop fingers
            - manual (jog mode) and automatic cycle selector switch
            - split deer foot upper tools
            - 2x universal V-die block, reversible
            - freely movable 2-hand/foot control
            - Operation manual




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPES 40.135


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9301136 · Hydr. pressbrake

          HACO - PPES 40.135 - - 1991 - M 9101

          Technical details
          pressure 135 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱stroke 130 mm︱dayligth 325 mm︱throat 250 mm︱working feed 10,0 mm/sec︱return speed 100 mm/sec︱table width 180 mm︱work height max. 865 mm︱Control M 9101 ︱oil volume 225 Liter︱engine output 11,0 kW︱weight 11.500 kg︱Dimensions (LxWxH) 4270 x 1500 x 2530 mm︱
          Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German * Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be
            pressure 135 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            stroke 130 mm
            dayligth 325 mm
            throat 250 mm
            working feed 10,0 mm/sec
            return speed 100 mm/sec
            table width 180 mm
            work height max. 865 mm
            Control M 9101
            oil volume 225 Liter
            engine output 11,0 kW
            weight 11.500 kg
            Dimensions (LxWxH) 4270 x 1500 x 2530 mm
            Description :
            Furnishing:
            - HACO / Robosoft NC control, model M 9101 controller
            - with external display / screen
            - pivoting control, front left
            - electric back gauge (X axis)
            - with 2x stop fingers, manually adjustable
            * manual windage (Z axis)
            * manual height adjustment (R axis)
            - hydraulic upper tool clamping
            - manual table crowning, adjustment with hand crank
            - segmented upper and lower tools
            - free-moving 2-hand control
            - free-moving footswitch
            - rear protective device (self-made)
            - User manual in German

            * Machinevideo :
            https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.be


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPES 40.135


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96918 · Hydr. pressbrake

          HACO - PPES 40.135 - - 1991 - M 9101

          Technical details
          pressure 135 t︱chamfer lenght 4100 mm︱distance between columns 3600 mm︱stroke 130 mm︱dayligth 325 mm︱throat 250 mm︱working feed 10,0 mm/sec︱return speed 100 mm/sec︱table width 180 mm︱work height max. 865 mm︱Control M 9101 ︱oil volume 225 Liter︱engine output 11,0 kW︱weight 11.500 kg︱Dimensions (LxWxH) 4270 x 1500 x 2530 mm︱
          Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable * manual windage (Z axis) * manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German
            pressure 135 t
            chamfer lenght 4100 mm
            distance between columns 3600 mm
            stroke 130 mm
            dayligth 325 mm
            throat 250 mm
            working feed 10,0 mm/sec
            return speed 100 mm/sec
            table width 180 mm
            work height max. 865 mm
            Control M 9101
            oil volume 225 Liter
            engine output 11,0 kW
            weight 11.500 kg
            Dimensions (LxWxH) 4270 x 1500 x 2530 mm
            Description :
            Furnishing:
            - HACO / Robosoft NC control, model M 9101 controller
            - with external display / screen
            - pivoting control, front left
            - electric back gauge (X axis)
            - with 2x stop fingers, manually adjustable
            * manual windage (Z axis)
            * manual height adjustment (R axis)
            - hydraulic upper tool clamping
            - manual table crowning, adjustment with hand crank
            - segmented upper and lower tools
            - free-moving 2-hand control
            - free-moving footswitch
            - rear protective device (self-made)
            - User manual in German




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPB 30.135


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9308351 · Hydr. pressbrake

          HACO - PPB 30.135 - - 1986 - konv.

          Technical details
          pressure 135 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱stroke of upper beam 130 mm︱throat 200 mm︱dayligth 310 mm︱working feed 7,0 mm/sec︱return speed 50,0 mm/sec︱Control konv. ︱work height max. 905 mm︱table width 180 mm︱oil volume 250 Liter︱total power requirement 7,5 kW︱weight 7800 kg︱range L-W-H 3500 x 1700 x 2280 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * including analogue depth display - manual backgauge, with analogue position display * adjustable from the front * on ball screws * 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control * Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308351
            pressure 135 t
            chamfer lenght 3050 mm
            distance between columns 2550 mm
            stroke of upper beam 130 mm
            throat 200 mm
            dayligth 310 mm
            working feed 7,0 mm/sec
            return speed 50,0 mm/sec
            Control konv.
            work height max. 905 mm
            table width 180 mm
            oil volume 250 Liter
            total power requirement 7,5 kW
            weight 7800 kg
            range L-W-H 3500 x 1700 x 2280 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * including analogue depth display
            - manual backgauge, with analogue position display
            * adjustable from the front
            * on ball screws
            * 2x manually adjustable stop fingers
            - Manual (jog mode) and automatic cycle selectable
            - split deer foot upper tool (segmented)
            - 2x reversible MULTI V die blocks
            - 1x freely movable foot control

            * Machine link:
            https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008-9308351


        • A + B Werkzeuge Maschinen Handels GmbH
        • Rottweg 17
        • 48683 Ahaus
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPB 30.135


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96891 · Hydr. pressbrake

          HACO - PPB 30.135 - - 1986 - konv.

          Technical details
          pressure 135 t︱chamfer lenght 3050 mm︱distance between columns 2550 mm︱stroke of upper beam 130 mm︱throat 200 mm︱dayligth 310 mm︱working feed 7,0 mm/sec︱return speed 50,0 mm/sec︱Control konv. ︱work height max. 905 mm︱table width 180 mm︱oil volume 250 Liter︱total power requirement 7,5 kW︱weight 7800 kg︱range L-W-H 3500 x 1700 x 2280 mm︱
          Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) * including analogue depth display - manual backgauge, with analogue position display * adjustable from the front * on ball screws * 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control
            pressure 135 t
            chamfer lenght 3050 mm
            distance between columns 2550 mm
            stroke of upper beam 130 mm
            throat 200 mm
            dayligth 310 mm
            working feed 7,0 mm/sec
            return speed 50,0 mm/sec
            Control konv.
            work height max. 905 mm
            table width 180 mm
            oil volume 250 Liter
            total power requirement 7,5 kW
            weight 7800 kg
            range L-W-H 3500 x 1700 x 2280 mm
            Description :
            Furnishing:
            - simple / conventional electro-hydraulic press brake
            - swiveling operation, front left
            - electric, stepless depth adjustment (Y1+Y2 axis)
            * including analogue depth display
            - manual backgauge, with analogue position display
            * adjustable from the front
            * on ball screws
            * 2x manually adjustable stop fingers
            - Manual (jog mode) and automatic cycle selectable
            - split deer foot upper tool (segmented)
            - 2x reversible MULTI V die blocks
            - 1x freely movable foot control




        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPH 30-260


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-96848 · Hydr. pressbrake

          HACO - PPH 30-260 - - -

          Technical details
          pressure 260 t︱chamfer lenght 3000 mm︱distance between columns mm︱upper beam stroke 250 mm︱total power requirement kW︱weight of the machine ca. 17 t︱dimensions of the machine ca. 3,40 x 1,90 x 3,45 m︱
          • Controlled axes: Y, X • Control: Haco type PB 2350 • Pivoting control panel, left front • Free-moving dual footswitch • Tool package: Stamp straight, H 175mm, approx. R 1.5 4 V block die V 15.22, 35, 50 mm Die V 100, length = 4 x 835 mm Die V 80, length = 4 x 835 mm
            pressure 260 t
            chamfer lenght 3000 mm
            upper beam stroke 250 mm
            weight of the machine ca. 17 t
            dimensions of the machine ca. 3,40 x 1,90 x 3,45 m
            Description :
            • Controlled axes: Y, X
            • Control: Haco type PB 2350
            • Pivoting control panel, left front
            • Free-moving dual footswitch
            • Tool package:
            Stamp straight, H 175mm, approx. R 1.5
            4 V block die V 15.22, 35, 50 mm
            Die V 100, length = 4 x 835 mm
            Die V 80, length = 4 x 835 mm


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake HACO PPB 30135


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-KAN205 · Hydr. pressbrake

          HACO - PPB 30135 - - -

          Technical details
          Capacity 100 T︱Bend length 3050 mm︱Control -
          Capacity: 135 T Bend length: 3.000 mm Electric back stop Incl. 1 Set of tools
            Capacity 100 T
            Bend length 3050 mm
            Control -
            Description :
            Capacity: 135 T
            Bend length: 3.000 mm
            Electric back stop
            Incl. 1 Set of tools





        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HACO HSLX 3025


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94048 · Plate Shear - Hydraulic

          HACO - HSLX 3025 - - 2007 - SC 70

          Technical details
          sheet width 3020 mm︱plate thickness 25,00 mm︱no. of strokes 4 - 8 Hub/min︱back stop - adjustable ca. 1250 mm︱work height max. 1040 mm︱Control SC 70 ︱cutting angle 0,5 - 3,0 °︱down holder 18 Stück︱engine output 56,0 kW︱weight of the machine ca. 38.000 kg︱range L-W-H 4200 x 2600 x 2650 mm︱
          ** good condition - ready to use (!) ** New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 * 200 programs x 127 sets per program * Material library max. 32 materials * programmable positioning from the backgauge * automatic electro-hydraulic cutting gap adjustment * automatic electro-hydraulic cutting angle adjustment * automatic retraction from the backgauge * automatic and manual programming mode * Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra long side stop, with ball rollers - 2x extra long support arms, with ball rollers - foot switch - CE mark/Declaration of Conformity - User manual in German
            sheet width 3020 mm
            plate thickness 25,00 mm
            no. of strokes 4 - 8 Hub/min
            back stop - adjustable ca. 1250 mm
            work height max. 1040 mm
            Control SC 70
            cutting angle 0,5 - 3,0 °
            down holder 18 Stück
            engine output 56,0 kW
            weight of the machine ca. 38.000 kg
            range L-W-H 4200 x 2600 x 2650 mm
            Description :
            ** good condition - ready to use (!)
            ** New price ~ 155.000 euros

            Furnishing:
            - heavy hydraulic / link-guided guillotine shears
            - HACO DNC - control model SC 70
            * 200 programs x 127 sets per program
            * Material library max. 32 materials
            * programmable positioning from the backgauge
            * automatic electro-hydraulic cutting gap adjustment
            * automatic electro-hydraulic cutting angle adjustment
            * automatic retraction from the backgauge
            * automatic and manual programming mode
            * Pivoting control panel, front left
            - electrical cutting length limitation
            - front finger protection
            - Ball casters in the table
            - 1x extra long side stop, with ball rollers
            - 2x extra long support arms, with ball rollers
            - foot switch
            - CE mark/Declaration of Conformity
            - User manual in German


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HACO HSLX 3000x6


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-94173 · Plate Shear - Hydraulic

          HACO - HSLX 3000x6 - - 1994 -

          Technical details
          sheet width 3050 mm︱plate thickness 6,00 mm︱distance between columns mm︱cutting angle 0,5 - 3,0 °︱drive motor 11 kW︱down holder 18 Stück ︱total power requirement kW︱weight of the machine ca. 6,00 t︱dimensions of the machine ca. m︱
          • Automatic cutting angle adjustment • Automatic cutting gap adjustment • Cutting line lighting • Support arms • Knife with 4 cutting edges • Cutting length limitation • CNC back gauge 705mm adjustment range 705 mm • Angle stop • Operation manual
            sheet width 3050 mm
            plate thickness 6,00 mm
            cutting angle 0,5 - 3,0 °
            drive motor 11 kW
            down holder 18 Stück
            weight of the machine ca. 6,00 t
            Description :
            • Automatic cutting angle adjustment
            • Automatic cutting gap adjustment
            • Cutting line lighting
            • Support arms
            • Knife with 4 cutting edges
            • Cutting length limitation
            • CNC back gauge 705mm adjustment range 705 mm
            • Angle stop
            • Operation manual


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic HACO HS 306


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-4011124 · Plate Shear - Hydraulic

          HACO - HS 306 - - 1984 -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱weight of the machine ca. 8800 kg︱
            sheet width 3000 mm
            plate thickness 6 mm
            weight of the machine ca. 8800 kg


        • Bästlein
        • Augsburger Str. 56
        • 89312 Günzburg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.