,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Plate Bending Machine - 3 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine  - 3 Rolls AKYAPAK 1030 x 70


          • Kurt Steiger Werkzeugmaschinen GmbH
          • Flachstr. 11
          • 65197 Wiesbaden
          • Deutschland

          • +49 (0) 611/421047
            +49 (0) 611/421040
          • info@kurt-steiger.de
            www.kurt-steiger.de
          #2043-19334 · Plate Bending Machine - 3 Rolls

          AKYAPAK - 1030 x 70 - - 1998 -

          Technical details
          sheet width mm︱plate thickness mm︱pre-bending 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          working width: 1050 mm

          metal sheet thickness: 1,5 mm

          upper roller-Ø: 70 mm

          below roller-Ø: 70 mm
          Njw93ychg

          weight: 320 kg

          space needed: 700 x 1300 x 1100 mm
            Description :
            working width: 1050 mm



            metal sheet thickness: 1,5 mm



            upper roller-Ø: 70 mm



            below roller-Ø: 70 mm

            Njw93ychg



            weight: 320 kg



            space needed: 700 x 1300 x 1100 mm


        • Kurt Steiger Werkzeugmaschinen GmbH
        • Flachstr. 11
        • 65197 Wiesbaden
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/86


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05155 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/86 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 100 mm︱pre-bending 86 ︱diameter of upper rolls 750 mm︱diameter of lower rolls 700 mm︱side roll diameter 600 mm︱power capacity 132 kW︱min. bending diameter 825 / 2750 mm︱weight of the machine ca. 80 t︱dimensions of the machine ca. 8,0 x 3,1 x 4,1 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (10.187 Euro) - material feeding table 1000 x 2000 (5.600 Euro) - center support (33.250 Euro) - 2 x side supports (29.000 Euro)
            sheet width 3100 mm
            plate thickness 100 mm
            pre-bending 86
            diameter of upper rolls 750 mm
            diameter of lower rolls 700 mm
            side roll diameter 600 mm
            power capacity 132 kW
            min. bending diameter 825 / 2750 mm
            weight of the machine ca. 80 t
            dimensions of the machine ca. 8,0 x 3,1 x 4,1 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulic powered cover for easy material extracting
            - 2-axis digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm

            Optional Accessories:
            - variable speed of rotation (10.187 Euro)
            - material feeding table 1000 x 2000 (5.600 Euro)
            - center support (33.250 Euro)
            - 2 x side supports (29.000 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Bending Machine -  4 Rolls AKYAPAK AHS 30/32


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05862 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/32 - - Neu / New -

          Technical details
          sheet width 3100 mm︱plate thickness 40 mm︱pre-bending 32 ︱diameter of upper rolls 460 mm︱diameter of lower rolls 420 mm︱side roll diameter 360 mm︱power capacity 30 kW︱min. bending diameter 1380 mm︱weight of the machine ca. 30,1 t︱dimensions of the machine ca. 6,3 x 2,3 x 2,6 m︱
          4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Euro)
            sheet width 3100 mm
            plate thickness 40 mm
            pre-bending 32
            diameter of upper rolls 460 mm
            diameter of lower rolls 420 mm
            side roll diameter 360 mm
            power capacity 30 kW
            min. bending diameter 1380 mm
            weight of the machine ca. 30,1 t
            dimensions of the machine ca. 6,3 x 2,3 x 2,6 m
            Description :
            4 Rolls Hydraulic Bending Machine

            Standard Features:
            - hardened and polished rolls
            - complete body made of ST-52 steel
            - hydraulically opened/closed drop end controlled from control panel
            - digital readout for side rolls
            - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls
            vertical movements are hydraulic powered
            - separate control panel
            - oil cooler
            - conic bending
            - in accordance to CE-norm
            - Warranty 12 months

            Optional Accessories:
            - variable speed of rotation (5.858,00 Euro)
            - material feeding table (5.100,00 Euro)
            - center support (18.750,00 Euro)
            - 2 x side supports (15.000,00 Euro)



        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls AKYAPAK AHS 30/40


          • Knops Werkzeugmaschinen
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-H08500 · Plate Bending Machine - 4 Rolls

          AKYAPAK - AHS 30/40 - - NEU / NEW -

          Technical details
          sheet width 3100 mm︱plate thickness 50 mm︱pre-bending 40 mm︱total power requirement kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 6,7 x 3,0 x 3,0 m︱
          4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the control panel Central rolls (top and bottom rolls) driven by hydraulic motors and planetary gear reducers Electro – hydraulic calibration OPTIONAL FEATURES AND ACCESSORIES: Unit Qty Price (€) Variable speed of rotation: 6.600,- € Material feeding table: 5.100,- € Center support: 18.750,- € Side supports (left and right): 15.150,- € GENERAL CONDITIONS: WARRANTY 12 Months. The warranty expires in case of incorrect utilization and requires using original Akyapak spare parts and consumables. The warranty period starts after installation and commissioning of the equipment. INCOTERMS Exworks, Bursa, Turkey PAYMENT Via cable money transfer 30% downpayment with the placement of order. 70% balance upon notice of goods ready for shipment INSTALLATION, COMISSIONING AND TRAINING Installation, commissioning and training requested by a customer is provided by Akyapak for an extra fee. All required items such as lubricants, oil, air compressor, items for connections of hydraulic, electric and air, test materials to be used during training and all other possible requirements are subject to be provided by the purchaser. OFFER VALIDITY 30 days.
            sheet width 3100 mm
            plate thickness 50 mm
            pre-bending 40 mm
            weight of the machine ca. 40 t
            dimensions of the machine ca. 6,7 x 3,0 x 3,0 m
            Description :
            4-ROLL Hydraulic Plate Rolling Machine

            Working length 3100 mm
            Maximum thickness Pre-bending 40 mm
            Bending 50 mm
            Yield Point: 240 N/mm2
            Number of rolls 4
            Motor Power 55 kW
            Min. diameter mm - Ø Top Roll Diameter x 3
            Top roll Ø 540 mm
            Bottom roll Ø 510 mm
            Side roll Ø 440 mm
            Length 6700 mm
            Height 3000 mm
            Width 3000 mm
            Weight 40.000 kg

            With:
            Cone bending device
            Induction hardened rolls
            Digital readout for side rolls
            Fully welded steel (St-52) frame
            Separate moveable control panel
            Dual bending speeds
            Electronic Parallelism
            All rolls are mounted in spherical roller bearings
            Hydraulically opened/closed drop end controlled from control panel
            Activation of cone rolling function and position adjustment via buttons on
            the control panel
            Central rolls (top and bottom rolls) driven by hydraulic motors and
            planetary gear reducers
            Electro – hydraulic calibration

            OPTIONAL FEATURES AND ACCESSORIES:
            Unit Qty Price (€)
            Variable speed of rotation: 6.600,- €
            Material feeding table: 5.100,- €
            Center support: 18.750,- €
            Side supports (left and right): 15.150,- €

            GENERAL CONDITIONS:

            WARRANTY
            12 Months. The warranty expires in case of incorrect utilization and requires
            using original Akyapak spare parts and consumables. The warranty period starts
            after installation and commissioning of the equipment.

            INCOTERMS
            Exworks, Bursa, Turkey

            PAYMENT
            Via cable money transfer
            30% downpayment with the placement of order.
            70% balance upon notice of goods ready for shipment

            INSTALLATION, COMISSIONING AND TRAINING
            Installation, commissioning and training requested by a customer is provided by
            Akyapak for an extra fee.
            All required items such as lubricants, oil, air compressor, items for
            connections of hydraulic, electric and air, test materials to be used during
            training and all other possible requirements are subject to be provided by the
            purchaser.

            OFFER VALIDITY
            30 days.




        • Knops Werkzeugmaschinen
        • Konrad-Zuse-Straße 5
        • 40789 Monheim
        • Deutschland

        • Datasheet
          Request / Contact

          Section Bender

          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 61


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360009 · Section Bender

          AKYAPAK - APK 61 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 20 (d 1200) mm︱I-beam section - upend 80 x 25 (d 2100) mm︱L-beam 50 x 50 x 6 (d 1000) mm︱bar material - diameter 40,0 (d 800) mm︱tube diameter 70 x 2 (d 1600) mm︱square material 60x60x3 (d 4000) mm︱total power requirement 4,75 kW︱weight of the machine ca. 1080 kg︱dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm︱
          - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German
            I - beam section - flat steel 80 x 20 (d 1200) mm
            I-beam section - upend 80 x 25 (d 2100) mm
            L-beam 50 x 50 x 6 (d 1000) mm
            bar material - diameter 40,0 (d 800) mm
            tube diameter 70 x 2 (d 1600) mm
            square material 60x60x3 (d 4000) mm
            total power requirement 4,75 kW
            weight of the machine ca. 1080 kg
            dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm
            Description :
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - lateral straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 45


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-7089 · Section Bender

          AKYAPAK - APK 45 - - NEU -

          Technical details
          I - beam section - flat steel 80 x 15 (d600) mm︱I-beam section - upend 60 x 10 (d800) mm︱L-beam 45 x 5 (d600) mm︱bar material - diameter 35,0 (d700) mm︱tube diameter 60 x 2,0 (d1000) mm︱square material 45x45x3,0 mm︱total power requirement 2,25 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 780 x 950 x 1450 mm︱
          - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm
            I - beam section - flat steel 80 x 15 (d600) mm
            I-beam section - upend 60 x 10 (d800) mm
            L-beam 45 x 5 (d600) mm
            bar material - diameter 35,0 (d700) mm
            tube diameter 60 x 2,0 (d1000) mm
            square material 45x45x3,0 mm
            total power requirement 2,25 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 780 x 950 x 1450 mm
            Description :
            - higher speed 6.6m/min
            - l-steel flat 80x15 (d600)mm
            - l-steel on edge 60x10 (d800) mm
            - Angle steel 45x5 (d600) mm
            - Solid material Ø 35.0 (d700) mm
            - Pipe diameter max. 60x2.0 (d1000) mm
            - Square material 45x45x3.0 mm


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 81


          • Heinz Sanders GmbH
          • Fresenburger Weg 4
          • 49779 Niederlangen
          • Deutschland

          • +49 (0) 5939 9406 40
            +49 (0) 5939 9406 50
          • maschinen@heinz-sanders.de
            www.heinz-sanders.de
          #1125-2360008 · Section Bender

          AKYAPAK - APK 81 - - NEU -

          Technical details
          I - beam section - flat steel 120 x 30 (d600) mm︱I-beam section - upend 100 x 20 (d2100) mm︱L-beam 80x80x8 (d2000) mm︱bar material - diameter 60 (d1000) mm︱tube diameter 100 x 3 (d3000) mm︱square material 50x25x2 (d600) mm︱total power requirement 5,5 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1240 x 1375 x 1540 mm︱
          Furnishing: - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - Hydraulically adjustable side straightening rollers - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German Special accessories included in the price: - hydraulic side roller adjustment
            I - beam section - flat steel 120 x 30 (d600) mm
            I-beam section - upend 100 x 20 (d2100) mm
            L-beam 80x80x8 (d2000) mm
            bar material - diameter 60 (d1000) mm
            tube diameter 100 x 3 (d3000) mm
            square material 50x25x2 (d600) mm
            total power requirement 5,5 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1240 x 1375 x 1540 mm
            Description :
            Furnishing:
            - hydraulic roller drive
            - Planetary gear delivery of the 2 lower rollers
            - for extra small bending radii
            - hardened tool holder (42CrMo4)
            - Standard roller set, hardened
            - Hydraulically adjustable side straightening rollers
            - mobile control panel
            - 3 powered rollers
            - Digital display
            - Machine can be used horizontally and vertically
            - CE mark / declaration of conformity
            - User manual in German

            Special accessories included in the price:
            - hydraulic side roller adjustment


        • Heinz Sanders GmbH
        • Fresenburger Weg 4
        • 49779 Niederlangen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Section Bender AKYAPAK APK 30


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-003404 · Section Bender

          AKYAPAK - APK 30 - - 2007 -

          Technical details
          I - beam section - flat steel 50 x 10 mm︱I-beam section - upend 80 x 15 mm︱I-beam section - upend 80 x 15 mm︱L-beam 50 mm︱round material 30,0 mm︱bar material dia. max. 1 1/2" mm︱bar material - diameter 30,0 mm︱weight 185 kg︱range L-W-H 670 x 530 x 1350 mm︱square material 40 x 40 x 3 mm︱pipes 60 x 2,0 mm︱total power requirement 0,75 kW︱
          Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided)
            I - beam section - flat steel 50 x 10 mm
            I-beam section - upend 80 x 15 mm
            I-beam section - upend 80 x 15 mm
            L-beam 50 mm
            round material 30,0 mm
            bar material dia. max. 1 1/2" mm
            bar material - diameter 30,0 mm
            weight 185 kg
            range L-W-H 670 x 530 x 1350 mm
            square material 40 x 40 x 3 mm
            pipes 60 x 2,0 mm
            total power requirement 0,75 kW
            Description :
            Equipment:
            • Base frame of the machine
            • Foot switch
            • Standard-rolls (divided)


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   


          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.