,
Red europea de distribuidores de maquinaria de almacenamiento.

Bitte einen Suchbegriff eingeben - Introduzca un término de búsqueda
Categoría
    Fabricante:
      máquinas:
        Comerciante:

          Sheet metal working - shaeres - bending

          Machinelist: Sheet metal working / shaeres / bending


          Angle Shear

          used Sheet metal working / shaeres / bending Angle Shear THEIS WI 1000/600


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01300 · Angle Shear

          THEIS - WI 1000/600 - - 1987 -

          Technical details
          cutting dimensions max. 600 x 1000 mm︱plate thickness max. 3 mm︱cutting angle 1,5 °︱side stop electrical adjustable 0 - 1010 mm︱rear stop electrical adjustable 0 - 610 mm︱no. of strokes 60 Hub/min︱total power requirement 14 kW︱weight of the machine ca. 8,7 t︱dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m︱
          Accessories: sheet metal stacking device on rails
            cutting dimensions max. 600 x 1000 mm
            plate thickness max. 3 mm
            cutting angle 1,5 °
            side stop electrical adjustable 0 - 1010 mm
            rear stop electrical adjustable 0 - 610 mm
            no. of strokes 60 Hub/min
            total power requirement 14 kW
            weight of the machine ca. 8,7 t
            dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m
            Description :
            Accessories: sheet metal stacking device on rails

          Datasheet
          Request / Contact

          Folding Machine (manually operated)

          used Sheet metal working / shaeres / bending Folding Machine (manually operated) LOTZE HZK 25/208


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01040 · Folding Machine (manually operated)

          LOTZE - HZK 25/208 - - 1950 -

          Technical details
          sheet width 2500 mm︱plate thickness 3 mm︱opening of upper clamping bar 250 mm︱
            sheet width 2500 mm
            plate thickness 3 mm
            opening of upper clamping bar 250 mm
          Datasheet
          Request / Contact

          Hydr. pressbrake

          used Sheet metal working / shaeres / bending Hydr. pressbrake WEINBRENNER GP 100


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01060 · Hydr. pressbrake

          WEINBRENNER - GP 100 - - 1988 - CNC 7400 PS

          Technical details
          pressure 100 t︱chamfer lenght 2050 mm︱distance between columns 1550 mm︱throat 250 mm︱stroke 200 mm︱adjustment of press crosshead 200 mm︱stroke speed - idle stroke downwards 105 mm/sec︱stroke speed - idle stroke upwards 180 mm/sec︱stroke speed - under load 9,5 mm/sec︱table width 200 mm︱table height over floor 900 mm︱dayligth 280 - 480 mm︱back stop - adjustable 3 - 729 mm︱control CYBELEC SYNCHRO ︱control CNC 7400 PS ︱total power requirement 7,5 kW︱weight of the machine ca. 10 t︱dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m︱
          - 4 axis controlled - Accessories: programmable back gauge, table extensions, various upper and lower dies segments
            pressure 100 t
            chamfer lenght 2050 mm
            distance between columns 1550 mm
            throat 250 mm
            stroke 200 mm
            adjustment of press crosshead 200 mm
            stroke speed - idle stroke downw. 105 mm/sec
            stroke speed - idle stroke upwar. 180 mm/sec
            stroke speed - under load 9,5 mm/sec
            table width 200 mm
            table height over floor 900 mm
            dayligth 280 - 480 mm
            back stop - adjustable 3 - 729 mm
            control CYBELEC SYNCHRO
            control CNC 7400 PS
            total power requirement 7,5 kW
            weight of the machine ca. 10 t
            dimensions of machine L x W x H 3,70 x 2,00 x 2,80 m
            Description :
            - 4 axis controlled -

            Accessories: programmable back gauge, table extensions,
            various upper and lower dies segments
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Hydr. pressbrake MENGELE H 160-3


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01072 · Hydr. pressbrake

          MENGELE - H 160-3 - - 1987 - FORTRON CNC 10 H 4

          Technical details
          pressure 160 t︱chamfer lenght 4000 mm︱distance between columns 3060 mm︱control FORTRON CNC 10 H 4 ︱throat 280 mm︱stroke 250 mm︱dayligth 500 mm︱table length 4050 mm︱table width 280 mm︱feed down 70 mm/sec︱feed up 68,4 mm/sec︱working feed 9 / 3,5 mm/sec︱operating pressure max. 205 bar︱oil volume 400 l︱total power requirement 19,5 kW︱weight of the machine ca. 20,8 t︱Total weight including accessories 22 t︱dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m︱dimensions of switch cabinet 1,6 x 0,5 x 2,25 m︱
          - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions
            pressure 160 t
            chamfer lenght 4000 mm
            distance between columns 3060 mm
            control FORTRON CNC 10 H 4
            throat 280 mm
            stroke 250 mm
            dayligth 500 mm
            table length 4050 mm
            table width 280 mm
            feed down 70 mm/sec
            feed up 68,4 mm/sec
            working feed 9 / 3,5 mm/sec
            operating pressure max. 205 bar
            oil volume 400 l
            total power requirement 19,5 kW
            weight of the machine ca. 20,8 t
            Total weight including accessori. 22 t
            dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m
            dimensions of switch cabinet 1,6 x 0,5 x 2,25 m
            Description :
            - 3-axis machine -

            Acc.: programmable back gauge, upper and lower dies, table extensions
          Datasheet
          Request / Contact

          Mandrel tube bending machine

          used Sheet metal working / shaeres / bending Mandrel tube bending machine SCHWARZE-WIRTZ PERFEKT WE 40 D


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01220 · Mandrel tube bending machine

          SCHWARZE-WIRTZ - PERFEKT WE 40 D - - 1977 -

          Technical details
          tube diameter max. 38 mm︱wall strength 2 mm︱bar material dia. min. 10 mm︱bending radius min. 35 mm︱bending radius max. 150 mm︱pull up length of tube 4500 mm︱bending angle max. 180 °︱accuracy of bending angle ± 0,2 °︱total power requirement 7,5 kW︱weight of the machine ca. 1,2 t︱dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m︱
          - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm
            tube diameter max. 38 mm
            wall strength 2 mm
            bar material dia. min. 10 mm
            bending radius min. 35 mm
            bending radius max. 150 mm
            pull up length of tube 4500 mm
            bending angle max. 180 °
            accuracy of bending angle ± 0,2 °
            total power requirement 7,5 kW
            weight of the machine ca. 1,2 t
            dimensions of machine L x W x H 6,7 x 1,4 x 1,9 m
            Description :
            - with 8-pos. bending angle pre-selection
            - crawler gear control
            - positioning device by hand
            - tube twist device

            Following bending tools are with the machine:
            - ø 10 mm, radius 27,5 mm
            - ø 12 mm, radius 35 mm
            - ø 12 mm, radius 56 mm
            - ø 15 mm, radius 35 mm
            - ø 15 mm, radius 57,5 mm
            - ø 18 mm, radius 35 mm
            - ø 18 mm, radius 59 mm
          Datasheet
          Request / Contact

          Notching Machine

          used Sheet metal working / shaeres / bending Notching Machine BOSCHERT KS 30-120


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01030 · Notching Machine

          BOSCHERT - KS 30-120 - - 1990 -

          Technical details
          plate thickness 4 (St 40) mm︱plate thickness 3 (VA) mm︱cutting angle adjustment 30 - 120 °︱cutting length 200 mm︱throat 300 mm︱table height 900 mm︱working stroke max. 40 mm︱no. of strokes max. 40 Hub/min︱hole punching press: throat 300 mm︱Punch power 125 kN︱punch diameter max. 105 mm︱total power requirement 4 kW︱weight of the machine ca. 2,0 t︱dimensions of machine L x W x H 1,5 x 1,3 x 1,38 m︱
          = hydr. notching machine with hole punch Accessories: various punches and dies
            plate thickness 4 (St 40) mm
            plate thickness 3 (VA) mm
            cutting angle adjustment 30 - 120 °
            cutting length 200 mm
            throat 300 mm
            table height 900 mm
            working stroke max. 40 mm
            no. of strokes max. 40 Hub/min
            hole punching press: throat 300 mm
            Punch power 125 kN
            punch diameter max. 105 mm
            total power requirement 4 kW
            weight of the machine ca. 2,0 t
            dimensions of machine L x W x H 1,5 x 1,3 x 1,38 m
            Description :
            = hydr. notching machine with hole punch

            Accessories: various punches and dies
          Datasheet
          Request / Contact

          Plate Bending Machine - 4 Rolls

          used Sheet metal working / shaeres / bending Plate Bending Machine - 4 Rolls HAEUSLER VRM 1500 x 5


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01016 · Plate Bending Machine - 4 Rolls

          HAEUSLER - VRM 1500 x 5 - - 1964 -

          Technical details
          sheet width 1500 mm︱plate thickness 5 mm︱pre-bending 4 ︱upper roll diameter 185 mm︱lower roll diameter 185 mm︱side roll diameter 145 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of machine L x W x H 4,0 x 1,23 x 1,6 m︱
          - conical bending - pneumatic hinged bearing
            sheet width 1500 mm
            plate thickness 5 mm
            pre-bending 4
            upper roll diameter 185 mm
            lower roll diameter 185 mm
            side roll diameter 145 mm
            dimensions of machine L x W x H 4,0 x 1,23 x 1,6 m
            Description :
            - conical bending
            - pneumatic hinged bearing
          Datasheet
          Request / Contact

          Plate Shear - Hydraulic

          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic STEINER HTS 30-16 RA


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01256 · Plate Shear - Hydraulic

          STEINER - HTS 30-16 RA - - ca. 1978 -

          Technical details
          sheet width 3050 mm︱plate thickness 16 mm︱distance between columns - mm︱back stop - adjustable 1000 mm︱total power requirement kW︱weight of the machine ca. 15 t︱
          Acc.: electr. back gauge with DRO, table extensions
            sheet width 3050 mm
            plate thickness 16 mm
            distance between columns - mm
            back stop - adjustable 1000 mm
            weight of the machine ca. 15 t
            Description :
            Acc.: electr. back gauge with DRO, table extensions
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3000


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01245 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3000 - - 1997 -

          Technical details
          sheet width 3050 mm︱plate thickness 6 mm︱distance between columns 3100 mm︱back stop - adjustable 750 mm︱cutting angle adjustment 0,5 - 3,0 °︱no. of strokes 9 - 17 Hub/min︱table height over floor 775 mm︱total power requirement 7,5 kW︱weight of the machine ca. 4,5 t︱dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m︱
          Accessories: electr. back stop, angle front stop, table extensions, spare knives
            sheet width 3050 mm
            plate thickness 6 mm
            distance between columns 3100 mm
            back stop - adjustable 750 mm
            cutting angle adjustment 0,5 - 3,0 °
            no. of strokes 9 - 17 Hub/min
            table height over floor 775 mm
            total power requirement 7,5 kW
            weight of the machine ca. 4,5 t
            dimensions of machine L x W x H 3,75 x 1,65 x 1,7 m
            Description :
            Accessories: electr. back stop, angle front stop, table extensions,
            spare knives
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic ATLANTIC ATS 3012


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01248 · Plate Shear - Hydraulic

          ATLANTIC - ATS 3012 - - 1990 -

          Technical details
          sheet width 3050 mm︱plate thickness 12 mm︱distance between columns 3100 mm︱table height over floor 900 mm︱cutting angle adjustment 0,5 - 3 °︱no. of strokes 6 - 13 Hub/min︱back stop - adjustable 1000 mm︱down holder 18 St︱oil volume 350 l︱total power requirement 22,5 kW︱weight of the machine ca. 8 t︱dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m︱
          Accessories: electr. back gauge, spare knives
            sheet width 3050 mm
            plate thickness 12 mm
            distance between columns 3100 mm
            table height over floor 900 mm
            cutting angle adjustment 0,5 - 3 °
            no. of strokes 6 - 13 Hub/min
            back stop - adjustable 1000 mm
            down holder 18 St
            oil volume 350 l
            total power requirement 22,5 kW
            weight of the machine ca. 8 t
            dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m
            Description :
            Accessories: electr. back gauge, spare knives
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic WIEGER DELTA 6/30


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01244 · Plate Shear - Hydraulic

          WIEGER - DELTA 6/30 - - 1988 -

          Technical details
          sheet width 3000 mm︱plate thickness 6 mm︱distance between columns 3100 mm︱cutting angle 1°15´ ︱no. of strokes 16 Hub/min︱down holder 16 Stück︱back stop - adjustable 750 mm︱total power requirement 11 kW︱weight of the machine ca. 5,7 t︱dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m︱
          Accessories: electr. back stop with DRO ELGO electric, angle front stop
            sheet width 3000 mm
            plate thickness 6 mm
            distance between columns 3100 mm
            cutting angle 1°15´
            no. of strokes 16 Hub/min
            down holder 16 Stück
            back stop - adjustable 750 mm
            total power requirement 11 kW
            weight of the machine ca. 5,7 t
            dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m
            Description :
            Accessories: electr. back stop with DRO ELGO electric, angle front stop
          Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Plate Shear - Hydraulic SAGITA-BEYELER 3100 x 4


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01240 · Plate Shear - Hydraulic

          SAGITA-BEYELER - 3100 x 4 - - 1973 -

          Technical details
          sheet width 3100 mm︱plate thickness 4 mm︱distance between columns 3170 mm︱back stop - adjustable 650 mm︱down holder 11 Stück︱cutting angle 1,5 °︱no. of strokes 30 Hub/min︱table height 750 mm︱total power requirement 12 kW︱weight of the machine ca. 4 t︱dimensions of machine L x W x H 3,60 x 1,50 x 1,40 m︱
          Accessories: electr. back stop, angle front stop, table extensions
            sheet width 3100 mm
            plate thickness 4 mm
            distance between columns 3170 mm
            back stop - adjustable 650 mm
            down holder 11 Stück
            cutting angle 1,5 °
            no. of strokes 30 Hub/min
            table height 750 mm
            total power requirement 12 kW
            weight of the machine ca. 4 t
            dimensions of machine L x W x H 3,60 x 1,50 x 1,40 m
            Description :
            Accessories: electr. back stop, angle front stop, table extensions
          Datasheet
          Request / Contact

          Punching Press

          used Sheet metal working / shaeres / bending Punching Press GABRO PAC 750


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01020 · Punching Press

          GABRO - PAC 750 - - unbekannt -

          Technical details
          throat 750 mm︱punch diameter max. 75 mm︱max. sheet metal thickness 4 mm︱weight of the machine ca. 250 kg︱dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m︱
          max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm
            throat 750 mm
            punch diameter max. 75 mm
            max. sheet metal thickness 4 mm
            weight of the machine ca. 250 kg
            dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m
            Description :
            max. punch cap. in steel ø 75 in 2,0 mm,
            in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm

          Datasheet
          Request / Contact

          Section Shear - Combined

          used Sheet metal working / shaeres / bending Section Shear - Combined PEDDINGHAUS 210 SUPER 16


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01225 · Section Shear - Combined

          PEDDINGHAUS - 210 SUPER 16 - - 1983 -

          Technical details
          round bar steel 50 mm︱square edge steel 40 x 40 mm︱L-beam 140 x 13 mm︱Punch power 900 kN︱hole punching press: throat 510 mm︱hole punching press: max. length of stroke 29 mm︱hole punching press: capacity (dia. x thick.) 31 x 20 mm︱notching: l + T material 80 x 14 mm︱no. of strokes 40 / 45 Hub/min︱total power requirement 4 kW︱weight of the machine ca. 3,7 t︱dimensions 2,1 x 0,7 x 2,12 m︱
          Accessories: various punches and dies
            round bar steel 50 mm
            square edge steel 40 x 40 mm
            L-beam 140 x 13 mm
            Punch power 900 kN
            hole punching press: throat 510 mm
            hole punching press: max. length. 29 mm
            hole punching press: capacity (d. 31 x 20 mm
            notching: l + T material 80 x 14 mm
            no. of strokes 40 / 45 Hub/min
            total power requirement 4 kW
            weight of the machine ca. 3,7 t
            dimensions 2,1 x 0,7 x 2,12 m
            Description :
            Accessories: various punches and dies
          Datasheet
          Request / Contact

          Stamping and Punching Machine

          used Sheet metal working / shaeres / bending Stamping and Punching Machine LVD DELTA 1500 LB-TK


          • Hans Klein Werkzeugmaschinenhandel GmbH
          • Im Mühlgut 2-4
          • 77815 Bühl
          • Deutschland

          • 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
          • info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
          #1052-01025 · Stamping and Punching Machine

          LVD - DELTA 1500 LB-TK - - 1993 - MNC 32000

          Technical details
          sheet width 1550 mm︱plate length 2525 mm︱plate thickness 6,4 mm︱Punching capacity 200 kN︱speed of positioning X 50 m/min︱speed of positioning Y 50 m/mih︱no. of strokes 200 / 400 Hub/min︱control MNC 32000 ︱ATC 22 Pos︱total power requirement 7,5 kW︱weight of the machine ca. 21,3 t︱
            sheet width 1550 mm
            plate length 2525 mm
            plate thickness 6,4 mm
            Punching capacity 200 kN
            speed of positioning X 50 m/min
            speed of positioning Y 50 m/mih
            no. of strokes 200 / 400 Hub/min
            control MNC 32000
            ATC 22 Pos
            total power requirement 7,5 kW
            weight of the machine ca. 21,3 t
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Perfil del comerciante: Hans Klein Werkzeugmaschinenhandel GmbH

          Contactar con el comerciante



            Hans Klein Werkzeugmaschinenhandel GmbH
           En el Muehlgut 2-4
            77815 - Bühl
            Alemania
            0049 (0) 7223 9617-0 "> 0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de

          Perfil del comerciante

          Historia

          1967
          La empresa „Hans Klein Dreherei - Vorrichtungsbau - Formenbau“ fue fundada por Hans Klein en la casa de sus padres, en un área de 70 metros cuadrados.

          1969
          Colocación de la primera piedra en la nueva sede de la empresa. En una parcela de 6.000 m2, Hans Klein está construyendo una nave de fabricación que incluye un edificio de oficinas, el área es 500 m2.
          6000 sitio qm

          1972
          Además de la producción, inicia el comercio de máquinas herramienta usadas.

          1973/74
          Hans Klein le está dando más importancia al comercio y termina la producción.

          1977
          El propietario único se convierte en empresa "GmbH".

          1979/80
          Para la expansión de la capacidad de stock, Hans Klein construye un nuevo almacén. Su superficie es de 1.600 m2, la capacidad de la grúa es de 20 toneladas.
          nuevo almacén

          1982/83
          Le sigue una ampliación del edificio de oficinas.

          1997/98
          Para satisfacer la necesidad cada vez mayor de más espacio, Hans Klein alquila un almacén externo en Ottersweier, a una distancia de 10 km del sitio de la compañía. Teniendo 2.500 metros cuadrados adicionales a disposición, se pueden mostrar otras máquinas. Una grúa de toneladas 35 está disponible.
          segundo almacén

          2001/02
          Hans Klein compra una olla de tierra de 3500 metros cuadrados en el sitio de la compañía. Se construye un nuevo almacén con una superficie de 1700 m² y se instala una grúa de capacidad de 50 toneladas. La sala alquilada está despejada.
          sitio comprado

          Contacto

          Hans Klein Machine Tool Trade GmbH
          En el Muehlgut 2-4
          D-77815 Buhl-Weitenung
          Tel.: + 49 (0) 7223 - 96 17-0
          Fax.: + 49 (0) 7223 - 5 85 12
          Correo Electrónico:  info@klein-werkzeugmaschinen.de
          Página principal: www.klein-werkzeugmaschinen.de





          Used sheet metal working machines at LagerMaschinen.de
          Get your used sheet metal working machines at LagerMaschinen.de

          Sheet metal working machines are machines used in the metalworking process involved in the production of sheet metal. Some of the types of used sheet metal working machines involved in this process are lathes roll slitters brake presses and stamping presses to name just a few. These used sheet metal working machines are used to cut bend flatten and otherwise manipulate metal into the desired shape and thickness. Used sheet metal working machines can be used to roll or bend sheet metal into a desired shape and to give the fold or curve the desired angle they can also be used to punch the sheet metal into the desired shape.

          Used sheet metal working machines for every application

          From small home production labs for hobbyists to large-scale production facilities LagerMaschinen.de has used sheet metal working machines for every use. For some precision is not necessarily the most important consideration when choosing used sheet metal working machines. For others the precision and the flexibility of the used sheet metal working machines is the most important consideration. Whether you need bending folding cutting pressing or punching machines you will find what you are looking for at LagerMaschinen.de

          Quality used machines at LagerMaschinen.de

          For many companies the cost of new equipment can be a source of problems. With its international network of suppliers LagerMaschinen.de ensures that your used sheet metal working machines meet your quality requirements and at the same time guarantees a price that is far more cost-effective than new machines.

          Hans Klein Werkzeugmaschinenhandel GmbH   77815 - Bühl Im Mühlgut 2-4 Deutschland
          Hans Klein Werkzeugmaschinenhandel GmbH

          Im Mühlgut 2-4



          Contact Trader


            Hans Klein Werkzeugmaschinenhandel GmbH
           Im Mühlgut 2-4
            77815 - Bühl
            Deutschland
            0049 (0) 7223 9617-0
            0049 (0) 7223 58512
            info@klein-werkzeugmaschinen.de
            www.klein-werkzeugmaschinen.de
            Contact person:

           




          Machine category


          4-Walzen - Blechbiegemaschine · Abkantpresse - hydraulisch · Abläng- und Zentriermaschine · Absaugung · Aufspannplatte · Ausklinkmaschine · Bandsäge - Vertikal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Bohrkopf · Bügelsäge · Bügelsägeautomat · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppel-Gehrungsäge - Leichtmetall · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Einständerpresse - Hydraulisch · Entgratmaschine · Exzenterpresse - Doppelständer · Exzenterpresse - Einständer · Flachschleifmaschine - Horizontal · Flexibles Fertigungssystem · Fräsmaschine - Universal · Gewindefräsmaschine · Handabkantmaschine · Härteofen · Kaltkreissäge - Automatik · Langdrehautomat · Leit- und Zugspindeldrehmaschine · Lochstanzen · Magnetspannplatte · Mehrspindelstangenautomat · Messmaschine · Nachdrehbank · Presse bis 5000 KN · Profilstahlschere - Kombiniert · Radialbohrmaschine · Rahmenpresse - Hydraulisch · Rundschleifmaschine - Außen · Rundtaktmaschine · Rundtisch · Schraubstock · Schweißanlage · Schweißdrehtisch · Senkerodiermaschine · Spannfutter · Stangenlader · Stangenzuführung · Stanz- und Nibbelmaschine · Stähleschleifmaschine · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tischbohrmaschine · Trockenofen · Vertikaldrehmaschine · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Winkelschere ·